W58RGZ24B0026_Amend 0002_16May24.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

W58RGZ

ARMY CONTRACTING COMMAND-REDSTONE

REDSTONE ARSENAL AL 35898-5280

ZENITA N. DALE

EMAIL: ZENITA.N.DALE.CIV@ARMY.MIL

W58RGZ-24-B-0026

2024MAY02

X

X 2024JUN03 03:00pm

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 4

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SECTION A - SUPPLEMENTAL INFORMATION

Buyer Name: ZENITA N. DALE

Buyer Office Symbol/Telephone Number: CCAM-AL-M/(256)876-4082

Type of Contract 1: Firm Fixed Price

Kind of Contract: Maintenance Contracts

*** End of Narrative A0000 ***

A-1. Landing Gear, Fixed is not a Critical Safety Item (CSI).

A-2. This solicitation is for a five-year, Firm-Fixed-Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) contract pursuant to

FAR 52.216-22 using Sealed Bidding procedures under FAR Part 14.

Input National Stock Number (NSN): 1620-01-231-1831

Input Part Number (P/N): 70250-12051-045

Output NSN: 1620-01-231-1831

Output P/N: 70250-12051-045

Minimum Estimated Quantity: 360 each

Maximum Estimated Quantity: 2,160 each*

*Maximum estimated quantity includes the foreign military sales (FMS) quantity of 360 each.

A-3. There is a Depot Maintenance Work Requirement (DMWR) for the overhaul of the Landing Gear, Fixed. The DMWR-1-1620-247 revision date 07/21/2017, No Change # has been identified for this effort. This effort will be a 100% small business set-aside.

A-4. Reserved.

A-5. The FMS Customer and geographical location(s) for deliveries are currently unknown.

A-6. Subject to the availability of funds, any quantities ordered will be priced at the unit price established for the ordering period in which they are ordered. Funds shall be obligated by issuance of Delivery Orders and not by the contract itself.

A-7. The minimum quantity of 360 each (US quantity) shall be obligated on the first delivery order, to be issued simultaneously with the award of the contract. Any additional quantities ordered will be priced at the firm-fixed price in effect during the ordering period in which they are ordered and will not exceed the maximum of 2,160 units (including 360 units for FMS).

A-8. The Government will not be required to obtain the contractor's signature prior to the issuance of an order.

A-9. The Government intends to award only one Firm-Fixed Price Indefinite Delivery, Indefinite Quantity (IDIQ) contract, as a result of this solicitation to the responsible bidder whose bid, conforming to the invitation for bids, will be the most advantageous to the

Government, considering only price and the price-related factors included in the invitation.

A-10. The Government has segregated the estimated quantities into five ordering periods. However, this does not preclude exercising the

Government's right under FAR 52.216-19 by ordering the maximum quantity specified in FAR 52.216-19(b)(1) at any time during the five-year ordering period.

Ordering Period 1 will be from date of contract award through 365 days after contract award (DACA).

Ordering Period 2 will be from 366 DACA through 730 DACA.

Ordering Period 3 will be from 731 DACA through 1,095 DACA.

Ordering Period 4 will be from 1,096 DACA through 1,460 DACA.

Ordering Period 5 will be from 1,461 DACA through 1,825 DACA.

A-11. Please insert your firm fixed unit prices for the 1st, 2nd, 3rd, 4th, and 5th ordering periods in the spaces provided under each

CLIN/SubCLIN.

A-12. The bid acceptance period is 120 days from the date for receipt of bids specified in Block 8 unless a different period is stated in the bidder's bid.

A-13. No Government Furnished Material (GFM), other than the reparable assets and reusable containers, will be provided.

2 4

W58RGZ-24-B-0026

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

A-14. Electronic submissions for bids are authorized and is the only method of submission. Proposals should be emailed to zenita.n.dale.civ@army.mil and lindy.l.pinchon.civ@army.mil. Facsimile submissions are not authorized.

A-15. The Government will not accept hard copies of bids delivered by mail or hand.

A-16. Reserved.

A-17. There are no critical characteristics for this item.

A-18. Reserved.

A-19. The contractor may be required to submit certified cost or pricing data if only one bid is received IAW DFARS Clause 252.215-

7008, entitled "Only One Offer."

A-20. The contractor is instructed to put the following words in the remarks column of the DD 250/WAWF: "Repair and Return Process

D6M".

A-21. Access to DLA FedMALL (formerly known as EMALL) is NOT authorized. ___

A-22. The National Defense Authorization Act for Fiscal Year 1993, Public Law 102-484, Section 326, prohibits use of Ozone Depleting

Chemicals (ODC) in Department of Defense contracts awarded on or after 1 June 1993, unless appropriate authority is granted.

A-23. The following websites are provided for the purpose of obtaining/reviewing various Army publications and technical manuals/bulletins:

A. https://logsa.army.mil/etms/online.cfm - Technical Manuals and Bulletins

B. http://www.pubs.army.mil/ - DA Pamphlets and Army Regulations

A-24. COMPLETE THE FOLLOWING CONTRACTOR POINT OF CONTACT INFORMATION:

NAME: _________________________________________

TELEPHONE NUMBER: _____________________________

FAX NUMBER: ___________________________________

E-MAIL ADDRESS: _______________________________

A-25. TECHNICAL DATA CAN ONLY BE DISTRIBUTED TO CONTRACTORS WHO HAVE A CURRENT DD 2345, MILITARY CRITICAL TECHNICAL DATA AGREEMENT ON

FILE WITH DEFENSE LOGISTICS INFORMATION SERVICES (DLIS). TECHNICAL DATA THAT IS EXPORT-CONTROLLED MUST BE MARKED WITH AN EXPORT CONTROL

WARNING NOTICE. THIS STATEMENT IDENTIFIES TECHNICAL DATA WHICH THE DOD WILL WITHHOLD FROM PUBLIC RELEASE USING AUTHORITY IN 10

U.S.C.130, THE GOVERNMENT'S RIGHT TO USE, MODIFY, REPRODUCE, PERFORM, DISPLAY, OR DISCLOSE SUCH TECHNICAL IS RESTRICTED FOR THE

CONTRACTOR/ITS SUBSIDIARIES/OR SUB-CONTRACTORS' AT EVERY LEVEL. ANY REPRODUCTION OF TECHNICAL DATA OR PORTIONS THEREOF MARKED WITH THESE

LEGENDS MUST ALSO REPRODUCE THESE LEGENDS ON SUCH TECHNICAL DATA. CONTRACTORS WANTING TO OBTAIN ACCESS TO THE UNCLASSIFIED TECHNICAL

DATA DRAWINGS MUST HAVE JOINT CERTIFICATION PROGRAM (JCP) CERTIFICATION. INSTRUCTIONS FOR OBTAINING JCP CERTIFICATION CAN BE FOUND AT:

https://www.dla.mil/Logistics-Operations/Services/JCP/

If you would like to request a copy of the Depot Maintenance Work Requirement (DMWR) and/or applicable Maintenance Engineering Orders

(MEOs) please submit your request via e-mail to usarmy.redstone.amcom.list.immc-pub-epco@army.mil along with a completed form DD2345.

Include the following in the subject line of your email:

"Request for DMWR/MEO_W58RGZ-24-B-0026"

Include the following in the body of the email:

1. DMWR number

2. MEO numbers

3. Contract Specialist's name

4. Contracting Officer's name

If after three business days of submitting this request there is no response, the Contractor may notify the contract specialist and contracting officer for further inquiry.

3 4

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SOLICITATION PERIOD WILL NOT BE EXTENDED AS A RESULT OF LATE REQUEST FOR TECHNICAL DATA.

A-26. The Contractor shall comply with the Total Asset Visibility- contractor (TAV-C) reporting requirements, as outlined in Attachment

0009 - Contractor Repair TAV-C Requirements.

*** END OF NARRATIVE A0001 ***

The purpose of this Amendment (0002) is the following:

A-1. Revise Section A, Supplemental Information, paragraph A-25 as follows:

FROM:

If you would like to request a copy of the Depot Maintenance Work Requirement (DMWR) and/or applicable Maintenance Engineering Orders

(MEOs) please submit your request via e-mail to usarmy.redstone.amcom.list.immc-pub-epco@army.mil along with a completed form DD2345. If after three business days of submitting this request there is no response, the Contractor may notify the contract specialist and contracting officer for further inquiry.

TO:

If you would like to request a copy of the Depot Maintenance Work Requirement (DMWR) and/or applicable Maintenance Engineering Orders

(MEOs) please submit your request via e-mail to usarmy.redstone.amcom.list.immc-pub-epco@army.mil along with a completed form DD2345.

Include the following in the subject line of your email:

"Request for DMWR/MEO_W58RGZ-24-B-0026"

Include the following in the body of the email:

1. DMWR number

2. MEO numbers

3. Contract Specialist's name

4. Contracting Officer's name

If after three business days of submitting this request there is no response, the Contractor may notify the contract specialist and contracting officer for further inquiry.

A-2. Revise nomenclature on Attachment 0012, Pricing Template from "Hub, Rotor" to "Landing, Gear Fixed".

A-3. Extend the bid due date from 01 June 2024 @ 5:00pm to 03 June 2024 @ 3:00pm CST.

All other terms and conditions remain unchanged.

*** END OF NARRATIVE A0003 ***

4 4

SECTION A