Attachment_0024_-_Capabilities_and_Missions_By_Location_(East).pdf

W58RGZ-16-R-0006

Attachment 0024

24 May 2018

CAPABILITIES AND MISSIONS BY LOCATION

For

Aviation Field Maintenance (AFM) – East Region

Capabilities and Missions By Location (East)

24 May 2018 Page 2 of 8

Attachment 0024 Revision: 24 May 2018

Change History

Revision Changes 27 February 2017 Original Issue for RFP.

21 December 2017 Changed Attachment number from 0023 to 0024

Changed Program Management support locations in paragraph 2.1.

Removed the reference to Airframe Inspection Maintenance and Sustainment (AIMS) in paragraph 2.2 and 2.3.1.

Added Germany locations to paragraph 2.4 Added the airfield names to paragraph 6.

Added paragraph 5.9.3.

26 April 2018 Deleted paragraph 2.2.4 Deleted paragraph 2.2.3 Changed AFM to AFMD in paragraph 2.1 Added CH-47 and AH-64 to paragraph 2.2.2 Changed “airframe” to “aircraft” in paragraph 2.5 Added “ / Unit Support) to paragraph 2.4 Added Kosovo to paragraph 2.4.8 Added Multinational Force and Observers to paragraph 2.4.6 Changed paragraph 2.1.1 Added 5.3.2 to 5.3.8

16 May 2018 Added more definition to locations for SSS in section 5.9.

Updated the references in paragraph 5.12.

Corrected the PWS references in paragraphs 5.9 and 5.10.

24 May 2018 Deleted Katterbach Kaserne, Germany from paragraph 2.4.5.

Added Hohenfels, Germany to paragraph 2.6.5.

Updated ALSE capabilities in paragraph 4.

Capabilities and Missions By Location (East)

24 May 2018 Page 3 of 8

Table of Contents Page

1. Summary

2. Enduring Missions and Locations

3. Non-enduring Mission Locations

4. Back Shop Support by Location

5. PWS Requirements and Corresponding Locations

6. Collective Bargaining Agreements (CBA) Locations

7. Outside the Continental United States (OCONUS) Requirements by Location and Specific to Host Country/Nation

Capabilities and Missions By Location (East)

24 May 2018 Page 4 of 8

1. Summary

1.1. The purpose of this document is to support the Performance Work Statement (PWS) by identifying the capabilities and missions by location.

1.2. The Areas of Responsibility (AOR) are defined in Contract Attachment 0004 and will be referenced throughout this document.

1.3. Any changes to this document should be cross-referenced against the latest version of Contract Attachment 0004 Areas of Responsibility (AOR) to ensure accuracy.

1.4. The requirements for each mission are defined in the PWS.

1.5. PWS Missions are listed in this attachment for reference but are not limited to this document only.

1.6. Capabilities are listed in this attachment for reference but are not limited to this document only.

Capabilities may be adjusted to support mission requirements and later listed in this document.

1.7. The Government will update this attachment as needed to provide the most accurate information possible.

2. Enduring Missions and Locations

2.1. Program Management Support to AFMD (PWS paragraph 3.1.1)

2.1.1. The AFMD East Regional Program Management position shall be located in Huntsville, Alabama area to support AFM Government Headquarters staff.

2.1.2. Other Program Management positions shall be located with the Government Regional

Management or at a different CONUS site as described in the Comprehensive Management Plan (CMP).

2.2. Reset (PWS paragraph 3.2.3.1)

2.2.1. Ft Campbell, KY; Mission Design Series (MDS): CH-47, AH-64, UH/HH-60L/M

2.2.2. Ft. Bragg, NC; MDS: UH/HH-60L/M, CH-47, AH-64

2.3. Modification Work Orders (MWO) (PWS paragraph 3.2.3.2)

2.3.1. MWO may be installed during Reset where the locations will align with those in paragraph

2.2.

2.3.2. MWO may also be installed on location of the aircraft by traveling “road” teams. These teams shall be based out of the locations identified in paragraphs 2.1 or 2.2.

2.3.3. Exceptions shall be provided by the Contractor to the COR for approval.

2.4. Combat Aviation Brigade (CAB / Unit Support) (PWS paragraph 3.2.3.3)

2.4.1. Ft. Bragg, NC

2.4.2. Ft. Drum, NY

2.4.3. Ft. Stewart, GA

2.4.4. Ft Campbell, KY

2.4.5. Multinational Force and Observers (Egypt)

2.4.6. Illesheim Army Airfield Germany

2.4.7. Kosovo

2.4.8. Wiesbaden Germany

Capabilities and Missions By Location (East)

24 May 2018 Page 5 of 8

2.5. Aircraft Condition Evaluation (ACE) (PWS paragraph 3.2.3.6)

2.5.1. These teams shall be based out of one of the locations identified in paragraph 2.2.

2.5.2. Exceptions shall be provided by the Contractor to the COR for approval.

2.6. UH-72A Light Utility Helicopter (LUH) Support (PWS paragraph 1.3)

2.6.1. Joint Readiness Training Center (JRTC) Fort Polk Louisiana

2.6.2. Aberdeen Proving Grounds (APG), MD

2.6.3. West Point, NY

2.6.4. Fort Belvoir, VA

2.6.5. Hohenfels, Germany

2.7. National Maintenance Program (NMP) (PWS paragraph 3.2.3.5)

2.7.1. Ft Campbell, KY

3. Non-enduring Mission Locations

3.1. Crash and Battle Damage (CBD), Battle Damage Assessment and Repair (BDAR) (PWS paragraph 3.2.3)

3.1.1. These teams shall be based out of one of the locations identified in paragraph 2.2.

Exceptions shall be provided by the Contractor to the COR for approval.

3.2. Fit Check (PWS paragraph 3.2.1.24)

3.2.1. These teams shall be based out of one of the locations identified in paragraph 2.2.

Exceptions shall be provided by the Contractor to the COR for approval.

3.3. SAFR Lite (PWS paragraph 3.2.3)

3.3.1. These teams shall be based out of one of the locations identified in paragraph 2.2.

Exceptions shall be provided by the Contractor to the COR for approval.

3.4. Pre-mobilization (Pre-MOB) & Mobilization (MOB) (PWS paragraph 1.3)

3.4.1. These teams shall be based out of one of the locations identified in paragraph 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

3.5. Leave-Behind Equipment (LBE) (PWS paragraph 1.3)

3.5.1. These teams shall be based out of one of the locations identified in paragraph 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

3.6. Port Operations (PWS paragraph 3.2.3.4)

3.6.1. These teams shall be based out of one of the locations identified in paragraphs 2.2 or 2.4.

Exceptions shall be provided by the Contractor to the COR for approval.

3.7. Foreign Military Sales (FMS) (PWS paragraph 3.2.3.14)

3.7.1. These teams shall be based out of one of the locations identified in paragraph 2.2.

Exceptions shall be provided by the Contractor to the COR for approval.

3.8. Pass-back maintenance or Multinational Force and Observers (MFO) (PWS paragraph 1.3)

3.8.1. Egypt

3.8.2. Germany

Capabilities and Missions By Location (East)

24 May 2018 Page 6 of 8

3.9. Non-enduring field and sustainment maintenance mission support (PWS paragraph 3.2) at locations identified in Attachment 0004 Areas of Responsibility.

4. Back Shop Support by Location

5. PWS Requirements and Corresponding Locations

5.1. STAMIS Field Support (PWS paragraph 3.1.9.1.2)

5.1.1. These skill sets shall be located at each of the locations identified in paragraph 2.2.

Exceptions shall be provided by the Contractor to the COR for approval.

5.2. Site Supervision (PWS paragraph 3.2.1.2)

5.2.1. These skill sets shall be located at each of the locations identified in paragraph 2.2.

Exceptions shall be provided by the Contractor to the COR for approval.

5.3. Support for Maintenance Test Flight Operations (PWS paragraph 3.2.1.9)

5.3.1. These skill sets shall be located at each of the locations identified in paragraph 2.2 and correspond with the MDS for those locations. Exceptions shall be provided by the Contractor to the COR for approval.

5.3.2. Ft. Stewart, GA

5.3.3. Aberdeen Proving Grounds (APG), MD

5.3.4. West Point, NY

5.3.5. Joint Readiness Training Center (JRTC) Fort Polk Louisiana

5.3.6. Illesheim Army Airfield Germany

AFM East Back Shop Support Ft

Stewart Ft Bragg Ft

Drum Ft

Campbell Germany SWA

Blade Repair (3.2.4.4) X X X X X X Blade Dryer X X FEDS Capability (3.2.4.13) X X X Powertrain (3.2.4.14) X X X X X X Machine (3.2.4.5) X X X X X X Welding Shop (3.2.4.6) X X X X X X Airframe (Sheet metal) Repair (3.2.4.4) X X X X X X Hydraulic Shop (3.2.4.2) X X X X X X Avionics/Electrical Shop (3.2.4.8) X X X X X X ALSE Shop (3.2.4.9) X X X X Fabric/Upholstery Repair (3.2.4.7) X X Aircraft Survivability Equipment (ASE) Repair (3.2.4.8.2)

X X X

Battery Shop (3.2.4.11) L X Aircraft/Armament Capability (3.2.4.10) X X X Aircraft Instrumentation Capability (3.2.4.9)

X

Paint and Strip Capability (3.2.4.12) L X L X Component Repair (3.2.4.1) X X X X Engine Specialized Repair Activity

(ESRA) (3.2.4.3)

X

X – Capabilities exist at this location.

L – Capabilities are limited at this location.

Capabilities and Missions By Location (East)

24 May 2018 Page 7 of 8

5.3.7. Hohenfels Germany

5.3.8. Soto Cano Honduras

5.4. Chief Pilot (PWS paragraph 3.1.2)

5.4.1. This skill set shall be located at one of the locations identified in paragraph 2.2.

Exceptions shall be provided by the Contractor to the COR for approval.

5.5. Maintenance Test Pilot by MDS (PWS paragraph 3.2.1.9.2)

5.5.1. These skill sets shall be located at each of the locations identified in paragraph 2.2.

Exceptions shall be provided by the Contractor to the COR for approval.

5.6. Operating onsite machining equipment (PWS paragraph 3.2.4.5)

5.6.1. These skill sets shall be located at Fort Campbell, KY. Exceptions shall be provided by the Contractor to the COR for approval.

5.7. Welding personnel (PWS paragraph 3.2.4.6)

5.7.1. These skill sets shall be located at each of the locations identified in paragraph 2.2.

Exceptions shall be provided by the Contractor to the COR for approval.

5.8. ALSE shop leadership and ALSE Technicians (PWS paragraph 3.2.4.9.1)

5.8.1. These skill sets shall be located at each of the locations identified in paragraph 2.2.

Exceptions shall be provided by the Contractor to the COR for approval.

5.9. Site Safety Specialist (SSS) (PWS paragraph 4.2.2)

5.9.1. This skill set shall be located at each location/site identified in paragraph 2, and any additional location/sites listed in Attachment 0004 Areas of Responsibility.

5.9.2. Exceptions shall be provided by the Contractor to the COR for approval.

5.9.3. See also Attachment 0028 Additional OCONUS Requirements.

5.10. Additional Duties Safety Officer (ADSO) (PWS paragraph 4.2.3)

5.10.1. This skill set shall be located at each location identified in paragraphs 2.3.2 and 2.7.1.

5.10.2. Exceptions shall be provided by the Contractor to the COR for approval.

5.10.3. As new non-enduring missions and locations occur, the Contractor shall ensure coverage by ADSO until a SSS is assigned permanently.

5.11. Fort Campbell STAMIS (PWS paragraph 3.1.9.10)

5.11.1. This skill set shall be located at Fort Campbell.

5.11.2. Exceptions shall be provided by the Contractor to the COR for approval.

5.12. Contractor’s Theater Supervision (PWS paragraphs 3.1.1.10 and 4.9)

5.12.1. Contractor’s Theater Supervision shall be collocated with the Government Regional

Management cell, currently located on Bagram Airfield near Kabul, Afghanistan.

6. Collective Bargaining Agreements (CBA) Locations

6.1. Ft. Stewart, GA (Hunter Army Airfield)

6.2. Ft. Drum, NY (Wheeler-Sack Army Airfield)

Capabilities and Missions By Location (East)

24 May 2018 Page 8 of 8

7. Outside the Continental United States (OCONUS) Requirements by Location and Specific to Host Country/Nation

7.1. Technical Expert Status Accreditation (TESA) requirements, Germany only.

7.1.1. Technical Inspectors (TI).

7.1.2. Supply Technicians.

7.1.3. Maintenance Test Pilots.

7.1.4. Aircraft Mechanics (I, II, and III).

7.1.5. Hazardous Cargo Inspectors.

7.1.6. Hazardous Cargo Certifiers.

7.1.7. Aviation Life Support Equipment (ALSE) Technician

3.9. Non-enduring field and sustainment maintenance mission support (PWS paragraph 3.2) at locations identified in Attachment 0004 Areas of Responsibility.