Attachment_0009-_Skill_Classification_Crosswalk_Revised.xlsx

Skill Classification Crosswalk

ALSE Technician AIRCRAFT OPERATIONS Capable of staffing an ALSE shop depending upon local availability of ALSE support. Technicians must have sufficient ALSE experience to manage an ALSE program. Shop compliance will be IAW FM 1-385, and AR 95 1, Chapter 8. The Contractor’s personnel shall meet the training requirements stated in AR-95-1, Paragraph 8- 14. HS - Required Desired:Technical or Military School Training Minimum of 4 years experience

Armorer AIRCRAFT OPERATIONS Shall possess weapons repair certifiction from various manufacturer for the weapons required by Task Order. Maintains weapons logbooks, maintenance data forms, and weapons fault isolation, remove and replace faulty weapons hardware, verification of repais of the weapons systmes and Load/Unload Weapons as required and provides launch and recovery operations of installed weapons at the FARP. Performs only authoirzed maintenance as per OEM standards. Orders repair parts as required, maintains authorized stockage list (ASL) database. Accounts for all weapons in her/her custoday. Shall have well-developed written and verbal communication skills. HS diploma and Factory certification- Required Desired; Military/Law Enforcement or equivalent Civilian weapons Armorer school. 4 years Military, Law Enforcement or equivalent Civilian Armorer; 1 year OCONUS

Flight Operations Specialist AIRCRAFT OPERATIONS Process local and cross-country flight clearances. Check accuracy of flight plans. Coordinate flight plans. Maintain flight logs on incoming and outgoing flights. Alert crash crews of emergencies. Interpret and post weather reports. HS - Required Desired:Technical or Military School Training FAA Part 121 Dispatch certificate or EASA/ICAO equivalent. 2 years experience in flight operations. Must be able to obtain a secret clearance.

Functional / Operational Check Flight Pilot AIRCRAFT OPERATIONS Must have past or current designation as a Pilot/Aircraft Commander in the applicable aircraft and have 1500 hours (to include 200 hours as Functional Check Pilot) of experience in performing duties for Operational, Ferry, and Support flights. Must possess a military medical or FAA Class II clearance and be able to meet applicable physical and physiological minimum requirements for the applicable aircraft. BS preferred. DoD Pilot Training Certificates, DoD Transition School for applicable aircraft are required or FAA/EASA/ICAO approved flight training and certification 2 years as Functional Check Pilot

Instructor Pilot AIRCRAFT OPERATIONS Must have past or current designation as a Pilot/Aircraft Commander in the applicable aircraft and have 1500 hours (to include 200 hours as Instructor) of experience in performing duties for Operational, Ferry, and Support flights. Must possess a military medical or FAA Class II clearance and be able to meet applicable physical and physiological minimum requirements for the applicable aircraft. Provides flight instruction as aircraft instructor pilot. Conducts aircrew training flights. Provides flight training on procedures, aircraft systems, operational procedures, emergency procedures, malfunction analysis, navigation, aerodynamics, radio operatuions. Conduct hands-on flight exams in aircraft as well as oral and written flight exams. Instrument instructor examiner provides both inflight instruction and exams along with written and oral instructions and exams. BS preferred. DoD Pilot Training Certificates, DoD Transition School for applicable aircraft are required or FAA/EASA/ICAO approved flight training and certification 2 Years as Instructor Pilot

Maintenance Test Pilot AIRCRAFT OPERATIONS Performs flight readiness inspections, completes maintenance forms and aircraft log books. Flight tests the applicable aircraft to determine that the airframe, power plant, accessories and items of equipage are functioning IAW predetermined requirements. Performs maintenance operational checks of aircraft on the ground through engine run-up, aircraft taxiing or use of auxiliary power or testing equipment, to assure that aircraft systems or components disturbed during an inspection or maintenance action have been repaired, reassembled or adjusted satisfactorily. Performs general maintenance operational test flights to prove the airworthiness of the complete aircraft. Completes test flight check sheets IAW the applicable maintenance manual. Performs limited test flights when it is necessary to prove proper functioning of specific items/components. After each test flight, performs a thorough visual inspection to the extent necessary to ensure that deficiencies developed as a result of the test flight are detected and corrected before the aircraft is released for further flight. Must have past or current designation as a Pilot/Aircraft Commander in the applicable aircraft and have 1500 hours (to include 200 hours as Maintenance Pilot) of experience in performing duties for Operational, Ferry, and Support flights. Must possess a military medical or FAA Class II clearance and be able to meet applicable physical and physiological minimum requirements for the applicable aircraft. BS preferred. DoD Pilot Training Certificates, DoD Transition School for applicable aircraft are required or FAA/EASA/ICAO approved flight training and certification 2 years as Maintenance Pilot

Pilot AIRCRAFT OPERATIONS Must have past or current FAA or FAA equivalent designation as a Pilot/Aircraft Commander in the applicable aircraft and have 1000 hours of experience in performing duties for operational, ferry, and support flights. Must possess a military medical or FAA Class II clearance and be able to meet applicable physical and physiological minimum requirements for the applicable aircraft. A rated aviator who performs pilot duties as pilot in command or copilot for airplanes and/or helicopters. Flight duties may include ferry flight, training, maintenance support or a variety of missions. BS preferred. DoD Pilot Training Certificates, DoD Transition School for applicable aircraft are required or FAA/EASA/ICAO approved flight training and certification 10 years experience Minimum 1000 hours in category and 150 hours minimum of hood, weather and simulator time combined.

Configuration Data Manager DATA MGT Conduct and prepare configuration management plans and procedures, perform configuration audits, monitor trouble reports and change requests, evaluate and select tools to automate the change control process, and provides status accounting support. Establish, operate, and maintain program documentation support libraries. Assist in the evaluation, definition, standardization, and tracking of data elements. Facilitate working groups of functional experts to establish central repository requirements for data storage, protection, and retrieval. Create and populate data dictionaries. Provide full range of data mapping, validation, and documentation support. BS or BA Required Degree in a Technical Field Preferred 3 Years 7 Years

Configuration Management Analyst DATA MGT Responsible for configuration management planning. Describes provisions for configuration identification, change control, configuration status accounting, and configuration audits. Responsible for configuration planning. Identifies and maintains the original configuration of requirements documentation, design documentation, and related documentation. Responsible for configuration change control. Regulates the change process so that only approved and validated changes are incorporated into documents. Responsible for configuration status accounting. Tracks all problems and changes in product documents and reports changes and current configuration. Responsible for configuration audits. Supports audits to verify that requirements of all baselines have been met. BS or BA Required Degree in a Technical Field Preferred 5 Years 8 Years

Data Entry Technician DATA MGT Must have experience in the data entry field and be able to apply varied and advanced functions of word processing software to create, format, modify, and print a variety of documents. Must be familiar with advanced functions to generate tables of contents, to import graphs or databases, and to create glossaries and align columns. Carries out familiar assignments in accordance with previous instructions, standard procedures for creation of entry and retrieval of data and through use of established software packages. HS - Required Desired:Technical or Military School Training Minimum 1yr experience

Engineer, Electrical Level 1 (Entry) ENGINEERING Must have progressive experience in complex military electronics microprocessor-based systems, real-time networks, computer graphics, and analog and digital electronics; experience shall include design, development, and integration of complex military electronics; plus experience in supervising design and development of hardware projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware development, integration/implementation, and analysis; 3) participate in hardware evaluations; 4) develop standards and guidelines for tasks being performed; and, 5) interface with government personnel. Bachelor of Science in Electrical/Electronic Engineering required. Desired: Lean Six Sigma Training Two (2) years of direct experience in a relevant engineering activity is required. Desired: Lean Six Sigma experience

Engineer, Electrical Level 2 (Journeyman) ENGINEERING Must have progressive experience in complex military electronics microprocessor-based systems, real-time networks, computer graphics, and analog and digital electronics; experience shall include design, development, and integration of complex military electronics; plus experience in supervising design and development of hardware projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware development, integration/implementation, and analysis; 3) participate in hardware evaluations; 4) develop standards and guidelines for tasks being performed; and, 5) interface with government personnel. Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree. Desired: Lean Six Sigma Training Six (6) years of direct experience in a relevant engineering activity is required. Desired: Lean Six Sigma experience

Engineer, Electrical Level 3 (Senior / Lead Engineer) ENGINEERING Must have progressive experience in complex military electronics microprocessor-based systems, real-time networks, computer graphics, and analog and digital electronics; experience shall include design, development, and integration of complex military electronics; plus experience in supervising design and development of hardware projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware development, integration/implementation, and analysis; 3) participate in hardware evaluations; 4) develop standards and guidelines for tasks being performed; and, 5) interface with government personnel. Master of Science degree in engineering OR mathematics/physical science degree. Desired: Lean Six Sigma Training Ten (10) years direct experience in a relevant engineering activity is required. Desired: Lean Six Sigma experience

Engineer, General Level 2 (Journeyman) ENGINEERING Must have progressive experience in engineering management of militarysystems/sub-systems. Proven expertise is required in technology transfer, technology insertion, information systems, system upgrade/replacement, and application of emerging technologies. Must have extensive knowledge of military specifications and standards pertaining to military systems and sub-systems. Must have the capability to manage and integrate complicated sub-systems into higher level systems. Specialized experience is required to demonstrate understanding of engineering project development from inception to deployment and sustainment. Responsible for technical aspects of each project or program. Serves as technical point of contact with client on program activities. Ensures required resources including manpower, production standards, computer time and facilities are available for program implementation. Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree. Desired: Lean Six Sigma Training Six (6) years of direct experience in a relevant engineering activity is required. Desired: Lean Six Sigma experience

Engineer, General Level 3 (Senior / Lead Engineer) ENGINEERING Must have progressive experience in engineering management of militarysystems/sub-systems. Proven expertise is required in technology transfer, technology insertion, information systems, system upgrade/replacement, and application of emerging technologies. Must have extensive knowledge of military specifications and standards pertaining to military systems and sub-systems. Must have the capability to manage and integrate complicated sub-systems into higher level systems. Specialized experience is required to demonstrate understanding of engineering project development from inception to deployment and sustainment. Responsible for technical aspects of each project or program. Serves as technical point of contact with client on program activities. Ensures required resources including manpower, production standards, computer time and facilities are available for program implementation. Master of Science degree in engineering OR mathematics/physical science degree. Desired: Lean Six Sigma Training Ten (10) years of direct experience in a relevant engineering activity is required. Desired: Lean Six Sigma experience

Engineer, General Level 1 (Entry) ENGINEERING Must have progressive experience in engineering management of militarysystems/sub-systems. Proven expertise is required in technology transfer, technology insertion, information systems, system upgrade/replacement, and application of emerging technologies. Must have extensive knowledge of military specifications and standards pertaining to military systems and sub-systems. Must have the capability to manage and integrate complicated sub-systems into higher level systems. Specialized experience is required to demonstrate understanding of engineering project development from inception to deployment and sustainment. Responsible for technical aspects of each project or program. Serves as technical point of contact with client on program activities. Ensures required resources including manpower, production standards, computer time and facilities are available for program implementation. Bachelor of Science in an engineering discipline is required. Desired: Lean Six Sigma Training Two (2) years of direct experience in a relevant engineering activity is required. Desired: Lean Six Sigma experience

Engineer, Mechanical Level 1 (Entry) ENGINEERING Provides engineering support on systems, system elements, and/or interfacing systems, components, devices and/or processes. Possesses basic knowledge of industry practices, standards and technology areas. Works under close supervision and assists with solving routine problems in an engineering discipline. Assists in definition, trade-off and design activity. Reviews, evaluates, and analyzes design interfaces. Prepares, reviews, and evaluates interface documentation, specifications, test plans and procedures. Assists in definition, analysis and allocation of requirements. Supports test programs and analyzes testing. Conducts installation and maintenance of systems/equipment, and provides associated training to customer personnel. Diagnoses, isolates, and corrects problems to component level to restore system's functions. Required-Bachelor of Science in Mechanical Engineering required. Desired: Lean Six Sigma Training Two (2)Years of experience in Engineering. Desired: Lean Six Sigma experience

Engineer, Mechanical Level 2 (Journeyman) ENGINEERING Provides engineering support on systems, system elements, and/or interfacing systems, components, devices and/or processes. Possesses general working knowledge of industry practices, standards and technology areas. Works under general supervision, follows established procedures, and solves routine problems in the engineering discipline. Applies engineering disciplines to support design, development, implementation and operation activities. Assists in definition, trade-off and design activity. Reviews, evaluates, and analyzes designs. Prepares, reviews, and evaluates documentation, specifications, test plans and procedures. Assists in definition, analysis and allocation of requirements. Supports test programs and analyzes testing. Conducts analysis of requirements and components and supports audits conducted to ensure intended functionality and performance is achieved. Conducts installation and maintenance of systems/equipment, and provides associated training to customer personnel. Diagnoses, isolates, and corrects problems to component level to restore system's functions. Required- Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree Six (6) Years of experience in Mechanical Engineering Required 1 Year of Aviation Experience. Desired: Lean Six Sigma experience

Engineer, Mechanical Level 3 (Senior / Lead Engineer) ENGINEERING Provides discipline-specific or system-specific engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses in-depth technical and theoretical knowledge in specific discipline. Works independently or on a team and solves engineering-related problems. Supports entire system life cycle. Develops system architecture and design including software, hardware, communications and interface requirements. Leads definition, trade-off and design activities. Prepares, reviews, and evaluates system documentation, specifications, test plans and procedures. Conducts analysis to define, analyze and allocate requirements. Supports test programs and analyzes testing. Conducts analysis of requirements and components and performs audits to ensure functionality, operations and performance requirements are achieved. May provide daily supervision and direction to staff. Required-Master of Science degree in engineering OR mathematics/physical science degree. Desired: Lean Six Sigma Training Ten (10)Years - Required Experience must be related to complex weapon system engineering, design, analysis, performance or test and evaluation and include at least 2 years of managerial/ supervisory experience sufficient to ensure positive direction of subordinates. 4 Years desired in military aviation

Engineer, System Level 1 (Entry) ENGINEERING Must be able to develop and integrate concepts that involve requirements, design, prototyping, production, testing, training and logistics support in all phases of the weapon system life cycle. Includes all aspects of technical program that involve trade-off of performance, life-cycle cost, risk, producibility, supportability, testability and other engineering requirements. Performs reviews of requirements and translates them into technical specifications of equipment, software, facilities, data and personnel. Provides technical direction and guidance to lower level technical personnel as necessary. Experience includes technical involvement as applicable in one or more of the following: research; design; development; production; testing; and performance of theoretical studies, analysis of system design, recommendations to expand performance and enhance design of applicable system. In addition, must have a minimum of two (2) years of supervising system design, integration, and/or analytical projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware/software analysis, evaluations, development, and integration/implementation; 3) develop standards and guidelines for tasks being performed; 4) develop system specifications and system interface specifications; and 5) interface with Government personnel. Bachelor of Science in electronics/electrical engineering or physics. Desired: Lean Six Sigma Training Two (2) years of direct experience in a relevant engineering activity is required. Desired: Lean Six Sigma experience

Engineer, System Level 2 (Journeyman) ENGINEERING Must be able to develop and integrate concepts that involve requirements, design, prototyping, production, testing, training and logistics support in all phases of the weapon system life cycle. Includes all aspects of technical program that involve trade-off of performance, life-cycle cost, risk, producibility, supportability, testability and other engineering requirements. Performs reviews of requirements and translates them into technical specifications of equipment, software, facilities, data and personnel. Provides technical direction and guidance to lower level technical personnel as necessary. Experience includes technical involvement as applicable in one or more of the following: research; design; development; production; testing; and performance of theoretical studies, analysis of system design, recommendations to expand performance and enhance design of applicable system. In addition, must have a minimum of two (2) years of supervising system design, integration, and/or analytical projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware/software analysis, evaluations, development, and integration/implementation; 3) develop standards and guidelines for tasks being performed; 4) develop system specifications and system interface specifications; and 5) interface with Government personnel. Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree. Desired: Lean Six Sigma Training Six (6) years of direct experience in a relevant engineering activity is required. Desired: Lean Six Sigma experience

Engineer, System Level 3 (Senior / Lead Engineer) ENGINEERING Must be able to develop and integrate concepts that involve requirements, design, prototyping, production, testing, training and logistics support in all phases of the weapon system life cycle. Includes all aspects of technical program that involve trade-off of performance, life-cycle cost, risk, producibility, supportability, testability and other engineering requirements. Performs reviews of requirements and translates them into technical specifications of equipment, software, facilities, data and personnel. Provides technical direction and guidance to lower level technical personnel as necessary. Experience includes technical involvement as applicable in one or more of the following: research; design; development; production; testing; and performance of theoretical studies, analysis of system design, recommendations to expand performance and enhance design of applicable system. In addition, must have a minimum of two (2) years of supervising system design, integration, and/or analytical projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware/software analysis, evaluations, development, and integration/implementation; 3) develop standards and guidelines for tasks being performed; 4) develop system specifications and system interface specifications; and 5) interface with Government personnel. Master of Science degree in engineering OR mathematics/physical science degree. Desired: Lean Six Sigma Training Ten (10) years of direct experience in a relevant engineering activity is required. Desired: Lean Six Sigma experience

Engineering Manager ENGINEERING Plans and coordinates scheduling activities involving systems, projects or tasks. Analyzes interdependencies between related projects. Develops work breakdown structures. Performs business and administrative activities, such as budgeting, manpower and resource planning, and financial reporting. May perform configuration management functions and other engineering support functions. Produces management plans, technical documents, and presentation graphics. Integrates graphics. Organizes, maintains and uses project library. May provide daily supervision and direction to staff. BS - Required MS - Desired Degree in Business, Management, Engineering or other related field. Desired: Lean Six Sigma Training 10 Years with 4 Years Desired in military Aviation. Desired: Lean Six Sigma experience

SME ENGINEERING A Subject Matter Expert is a highly skilled individual who has an acknowledged specialized acquisition, logistics, and/or technological expertise in the specific functional tasks required for performance in an individual task order. Such individual should possess unique capability or experience not available under basic labor categories set forth in Section B of the contract. Such individual possess an advanced degree (Master) in either a technical, business, or management area, from an accredited college or university; or a BS degree in an engineering or technical field from an accredited college or university; or *15 or more years of defense/industrial or acquisition experience in the field of expertise. BS/BA in logistics, engineering, computer science, information systems, math or business. MS desired 10 Years Experience

Aerospace Structural Welder MAINTENANCE Performs fusion welding on aircraft and ground support equipment to a qualified Welding Procedures Specification (WPS), performs structural fusion welding on aerospace parts and components per the requirements of specifications as prescribed by Engineering Drawings and Work Orders. The incumbent is required to read and understand engineering drawings and welding symbols, fabricates manufacture-welded parts from engineering drawing without direct supervision, performs fusion welding and torch brazing for ground support equipment, ensuring the procedure is completed per the requirements of the national welding and brazing codes and specifications. This welder welds a wide variety of materials such as aluminum, magnesium, alloyed and low alloy steel, stainless steel and nickel alloy steels. The incumbent is required to have knowledge of the materials to select the correct filler materials and shielding gas when generating the Weld Procedure Specification (WPS), and produce flight critical welds and assist in the development process of generating Weld Procedure Specifications as mandated by welding codes and specifications. The Aerospace Structural Welder determines the sequence of welding in order to prevent or reduce the amount of warp to the weld, designs and fabricates weld holding fixtures as necessary to perform individual welding projects, performs pre-heat and post weld stress relief operations, maintains weld records. The incumbent may perform duties as a Qualified Weld Inspector by inspecting own welds and those of less qualified welders, and may perform duties such as training and re-certification in the various welding processes. HS - Required Desired:Technical or Military School Training 2 Years related experience in Welding

Aircraft Avionics Technician MAINTENANCE Aircraft avionics technician troubleshoots, inspects, repairs, and tests aircraft avionics systems that perform communications, navigation, radar systems, collision avoidance, and flight control functions. Removes or relocates electrical and electronic components and wiring to facilitate the installation of new electric/electronic equipment. Research, provide bill of material, fabricate/modify and install wire harness assemblies to support aging aircraft inspection and refurbishment program. The incumbent performs and/or assists with some duties associated with other trades. The level of skill, knowledge, and responsibility associated with other trades varies but is not intended to surpass the grade assigned to the positions. Must have ability to read, understand, and apply trade or administrative guides such as technical manuals, technical orders, standard repairs, blueprints, wiring, diagrams, sketches, and other related documentation. Verifiable certificates/education should be noted on resume. High school diploma or GED and appropriate EASA/ICAO or FAA license/certification. Two (2) years of experience in aircraft electronics installation, troubleshooting and repair.

Aircraft Avionics Technician Lead MAINTENANCE Aircraft avionics technician troubleshoots, inspects, repairs, and tests aircraft avionics systems that perform communications, navigation, radar systems, collision avoidance, and flight control functions. Removes or relocates electrical and electronic components and wiring to facilitate the installation of new electric/electronic equipment. Research, provide bill of material, fabricate/modify and install wire harness assemblies to support aging aircraft inspection and refurbishment program. The incumbent performs and/or assists with some duties associated with other trades. The level of skill, knowledge, and responsibility associated with other trades varies but is not intended to surpass the grade assigned to the positions. Must have ability to read, understand, and apply trade or administrative guides such as technical manuals, technical orders, standard repairs, blueprints, wiring, diagrams, sketches, and other related documentation. Verifiable certificates/education should be noted on resume. High school diploma or GED and appropriate EASA/ICAO or FAA license/certification. Eight (8) years of experience in aircraft electronics installation, troubleshooting and repair.

Aircraft Mechanic Level 2 (Journeyman) MAINTENANCE Removes and installs aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Services and lubricates aircraft and subsystems. Safely prepares aircraft for inspections and maintenance checks and services. Performs scheduled inspections and assists in performing special inspections. Performs limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Uses and performs operator maintenance on tools, special tools and aircraft ground support equipment. Mechanic applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Individuals must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Individual must have basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires a working knowledge of technical publications. Individual must be able to prioritize workloads and is required to lead teams through more complex aircraft relevant tasks. Must be capable of qualifying to perform Hazardous Flight duties as Crewmembers/Non-Crewmembers. Personnel filling these positions are required to meet the qualifications in AR 95-20. HS - Required Desired:Technical or Military School Training 4 Years direct experience in aircraft maintenance; military technical school or an Airframe & Power plant (A&P) License.

Aircraft Mechanic Level 3 (Senior/Lead) MAINTENANCE Must possess a level of experience necessary to inspect all aircraft assigned. Will also be proficient in the use of the current maintenance management system utilized to maintain Army aircraft forms and records. Plans, conducts, and supervises aircraft technical inspections. Computes basic weight and balance records. Participates in maintenance test flights and operation checks as required. Ensures compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration. Provides lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies. Prepares evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities. Must be capable of qualifying to perform Hazardous Flight duties as Crewmembers/Non-Crewmembers. Personnel filling these positions are required to meet the qualifications in AR 95-20. HS - Required Desired:Technical or Military School Training FAA license/certification/EASA/ICAO equivalent 8 Years direct experience in aircraft maintenance; military technical school or an Airframe & Power plant (A&P) License.

Aircraft Painter MAINTENANCE Coats surfaces of aircraft with paint, lacquer, epoxy, resin or other material, using brushes, rollers, spray guns and other devices, removes old paint from aircraft, using liquid paint remover and scraper. HS - Required Desired:Technical or Military School Training 1 Year general experience

Ground Support Equipment Mechanic MAINTENANCE Diagnoses malfunctions and repairs Ground Support Equipment (GSE), advises and trains lower grade workers on diagnosis and repair of less complex repair/maintenance problems, inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications; uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, maintain equipment records, and document maintenance actions, and analyzes, diagnosis, and repairs GSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. This mechanic maintains external fuel and grounding systems, performs scheduled and unscheduled maintenance on GSE, inspects, tests, and operates GSE to determine equipment serviceability and proper operation, services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications. This work also does the following: disassembles and assembles malfunctioning GSE accessories and components, removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories, stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations. This mechanic prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles. In addition to maintaining vehicle records, this mechanic maintains and updates paper and electronic equipment records, provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations, practices good housekeeping, tool control, Foreign Object Damage prevention, and safety at all times. HS - Required Technical or Military School Training; Completion of initial and annual Part 139 training (or EASA/ICAO equivalent) 2 Years general experience

Machinist MAINTENANCE Produces replacement parts and new parts in making repairs of metal parts of mechanical equipment. Work involves most of the following: interpreting written instructions and specifications, planning and laying out of work, using a variety of machinist's hand tools and precision measuring instruments, setting up and operating standard machine tools. This incumbent is responsible for the shaping of metal parts to close tolerances, making standard shop computations relating to dimensions of work, tooling, feeds, and speeds of machining; knowledge of the working properties of the common metals, selecting standard materials, parts, and equipment required for this work; and fitting and assembling parts into mechanical equipment. In general, the machinist's work normally requires a rounded training in machine-shop practice, usually acquired through a formal apprenticeship or equivalent training and experience. HS - Required Desired:Technical or Military School Training 2 Years related experience.

NDI Technician MAINTENANCE Inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Have the skills and knowledge to process parts and perform equipment standardization and to carry out any necessary preparation of parts before or after inspection. Be able to follow written instructions in the techniques/methods for which certified. Receive guidance or supervision from a Level II or III in that method when necessary. Completed initial Non Destructive Inspection Training Course and maintains basic qualification. HS - Required. Technical or Military School Training preferred & FAA license/certificate (or ICAO/EASA equivalent) 2 Years related experience in NDI

NDI Technician Level II MAINTENANCE Inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. NDI Level II shall have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document. Be thoroughly familiar with the scope and limitations of the technique/method in which they are certified. Be capable of providing the necessary guidance and/or supervision to trainers and Level I personnel in the technique/method in which they are certified. Be familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer. When specified in the written practice, be capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III. Determines test method, and prepares fluids and parts for nondestructive inspection. Interprets nondestructive inspection test results, and provides information about defects to repair center. Analyzes wear metal content on engine lubricating oil and other fluids, and recommends corrective action. Establishes radiation areas for radiographic operations. Computes and monitors personal exposure areas for radiographic operations, and monitors personnel exposure data. Performs nondestructive inspection on structures, components, and systems. Detects flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determines metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operates, maintains, and inspects nondestructive equipment. Performs operator maintenance and service inspections on shop equipment and tools. Ensures lock out and tag out procedures are accomplished prior to maintenance on equipment. Performs silver recovery functions. Handles and disposes of hazardous waste and materials. Completed initial Non Destructive Inspection training Course and maintains basic qualification. HS - Required Desired:Technical or Military School Training FAA Part 121 Dispatch certificate or EASA/ICAO equivalent. 4 Years related experience in NDI. Possesses current (American Society for Nondestructive Testing (ASNT) certification. (ASNT NDT Level II, III, ASNT NDT Level II, or ACCP Level II, Level III.)

Production Control Clerk MAINTENANCE Compiles and records production data for industrial establishments to compare records and reports on volume of production. HS - Required 1 Year general experience

Production Planner MAINTENANCE Plans and prepares production schedules. Draws up master schedule to establish sequence and lead time of each operation to meet schedules. Analyzes specifications and performs determines processes, tools, and human resource requirements. Plans and schedules workflow for and operation according to previously established manufacturing sequences and lead times. Plans sequence of fabrication, assembly, installation, and other manufacturing operations for guidance of production workers. Confers with department supervisors to determine status of assigned projects. Expedites operations that delay schedules and alters schedules to meet unforeseen conditions. Prepares production reports. Prepares lists of required materials, tools, and equipment. HS or Equivalent 2 Years production related experience

Structural Mechanic/ Installer MAINTENANCE Installs units, parts, equipment, and components in structural assembly, according to drawings and specifications, using hand tools and power tools. HS or equivalent. FAA "A" or appropriate military occupational specialty training. 5 years experience

Structural Mechanic/Installer Lead MAINTENANCE Assembles aircraft sections from parts, subassemblies, and components. Installs units, parts, equipment, and components in structural assembly, according to drawings and specifications, using hand tools and power tools. Inspects and tests installed units, parts, and equipment for fit, performance, and compliance with standards, using measuring instruments and test equipment. HS or equivalent. FAA "A" or appropriate military occupational specialty training. 10 years experience

Admin/Clerk PROGRAM MANAGEMENT Good written communications skills, working knowledge of word processing and integrated software applications, organizational skills and ability to perform detail-oriented work are required. Position may require the ability to pass and maintain a security clearance. Applies working knowledge of technical literature and various style guides, including customer specifications, to documentation and publication standards. Participates in maintaining technical manuals. Assists in validating/verifying, resolving discrepancies/ deficiencies and assessing accuracy/ adequacy of technical manual requirements. Edits reports, publications, proposals and correspondence to ensure clarity of content, consistency of format and accuracy of grammar. Interfaces with engineers and technical professionals in writing, editing and publishing various types of customer documents such as training manuals, concepts of operations and contract deliverables. Uses appropriate computer software application for document text production. Establishes and maintains electronic and/or hardcopy data library of documents and work order files for documents received for processing.