Attachment 0017 - NMWR candidate.docx

ATTACHMENT 0017

NMWR CANDIDATE LIST

SUMMARY TITLE: National Maintenance Work Requirement (NMWR) Data Summary

SPECIFIC INSTRUCTIONS: The contractor shall document a NMWR Data Summary for each component on the government approved NMWR candidate list. The summary will be in the contractor’s format, in end item hardware breakdown sequence. Functional Group Codes WILL be used. The final Summary will provide source data for the government to analyze and identify which components (parts) will have a NMWR prepared. The following data elements are required. The contractor may add additional data elements as desired.

DATA IN LMI SPECIFICATION :

LMI 0140 COMMERCIAL GOVERNMENT ENTITY(CAGE) CODE

LMI 0480 ITEM NAME

LMI 0630 MEAN TIME BETWEEN FAILURES (MTBF) *

LMI 1050 REFERENCE NUMBER (Part Number)

LMI 1220 SOURCE, MAINTENANCE AND RECOVERABILITY (SMR) CODE

DATA NOT IN LMI SPECIFICATION:

1. LSA Control Number (LCN).

2. Level of Maintenance, they are: Field (which includes: C-Crew, O-Service and F-Field) and Sustainment (which includes H-Below depot, L-Special Repair activity and D-Depot).

3. Component Cost (US Dollars, Based on a Lot of 100 Pieces).

4. Government cost to buy rebuilt/remanufactured (US Dollars, Based on a Lot of 100 Pieces).

5. Contractor cost to rebuild/remanufacture broken down as follows (US Dollars, Based on a Lot of 100 Units):

1. Labor hours to; tear down, remove/replace parts, any machining, rebuild, inspection, and testing.

1. Packing, shipping and any storage requirements.

1. Cost of any mandatory replacement parts and parts that will most likely be replaced.

1. Listing of any special tools or test equipment required to perform this work and cost of this equipment.

6. Identify whether it is directly available from the contractor through the same supply and distribution channels as all other parts/components.

7. Identify the standard to which the component will be remanufactured, rebuilt or otherwise refurbished:

1. like-new condition, using only new components,

1. Using nonstandard (oversize/undersize) bearings or other components which may vary from the original component configuration.

8. Describe the length and type of warranty, if different from a new component

9. Identify the method used to distinguish between new vs. rebuilt/remanufactured component, such as part number difference, etc.

10. Identify whether a commercial reusable container is available for the NMWR component candidate(s), and whether the container has a long life (20+ trips) or a short life (10 trips).

Format: Contractor’s format using Microsoft Excel *Projected annual demand rate for one machine based on 850 hours of operation can be used if MTBF is not known.

SUMMARY LAYOUT Contractor Provided

DISTRIBUTION STATEMENT D: Distribution authorized to the Department of Defense and their contractors only for Administrative or Operational Use (03 August 2021). Other requests for this document shall be referred to Product Manager Heavy Tactical Vehicles (PdM HTV) ATTN: SFAE-CSS-TS-H, 6501 East Eleven Mile Road, Detroit Arsenal, MI 48397-5000.