Attachment_0008-_S&SI.pdf

DRS SUSTAINMENT SYSTEMS, INC. Page 1 of 81 Contract: W56HZV-11-C-0092

MODULAR FUEL SYSTEM (MFS) PUMP RACK

MODULE (PRM) PROGRAM

CONTRACT: W56HZV-11-C-0092

NSN: 4930-01-517-6942

STORAGE AND SHIPPING INSTRUCTIONS

FINAL

19 February 2015

Prepared By:

DRS TECHNOLOGIES, SUSTAINMENT SYSTEMS, INC.

ST. LOUIS, MO 63121

Cage Code: 98255

Prepared For:

U.S. ARMY TANK-AUTOMOTIVE AND ARMAMENTS COMMAND

PRODUCT MANAGER, PETROLEUM AND WATER SYSTEMS

WARREN, MI 48397

Distribution Statement A: Approved for public release; distribution is unlimited.

DRS SUSTAINMENT SYSTEMS, INC. Page 2 of 81

Table Of Contents X=Required

Blank=Not Applicable Applicable Length of Storage Note Long Term Short Term General Information System Description 1 Purpose 2 Scope 3 Objectives 4

Requirements Definitions 5 X X Specifications and Standards 6 X X Containerization 7 X X Hazardous Materials 8 X X Markings 9 X X Cleaning and Drying 10 X X Componests of End Item (COEI) 11 X X Basic Issue Items (BII) 12 X X Preservation 13 X X Storage Cabinet 13.1 X X Engine, Diesel Preservation 13.2 X X Coolant System 13.2.1 X Crank Case 13.2.2 X X Engine Fuel System 13.2.3 X Serpentine Belt 13.2.4 X Air Intake 13.2.5 X Engine Openings 13.2.6 X X Exhaust 13.2.7 X Fuel and Bleed Tanks 13.3 X X Batteries 13.4 X X Filter/Separator 13.5 X X Water Cans 13.6 X X 600 GPM Pump 13.7 X X Miscellaneous Preservation 14 X X Cyclic Maintenance Inspection and Preparation for Shipment 15 X X Inspection and Maintenance Rates 15.1 X X Storage Plan Data 15.2 X X Storage Serviceability Standards 15.3 X X Schedules, Records, and Forms 15.4 X X Preparation for Shipment 16 X X Tiedowns 17 X X Lubricants, Fluids and Materials 18 X X Shipping Weights and Dimensions 19 X X Forms 20 X X

DRS SUSTAINMENT SYSTEMS, INC. Page 3 of 81

1) System Description The Pump Rack Module (PRM) is one component of the Modular Fuel System (MFS), which is the primary system for storing and issuing fuel in selected units at division level and below. The PRM is capable of filtering and issuing kerosene based fuels (i.e. JP-5, JP-8, Jet-A, Jet-A1) and diesel fuel. The initial use of the PRM will be to provide a mobile fuel issuing capability for the Expeditionary Brigade Combat Team (EBCT). The PRM fielded to the EBCT will be transported on Palletized Load System (PLS) trailers and towed by Heavy Expanded Mobility Tactical Truck (HEMTT) tankers or Heavy Expanded Mobility Tactical Truck-Load Handling System (HEMTT-LHS) trucks. The PRM can be used to support relocation of forces by providing a refuel on the move (ROM) capability. The units requiring the PRM must possess the ability to rapidly change operational locations and be ready to provide petroleum product in a very short time without the use of large numbers of support assets. The flexibility of the system allows the capacity and layout to be tailored to the tactical situation. The PRM provides the ability to rapidly establish a fuel distribution capability at any location regardless of the availability of construction equipment or material handling equipment. A HEMTT-LHS and PLS can recover the PRM, transport it to the new location, and emplace the system.

The PRM can be used with as many manifold sources as feasible or with a collapsible storage tank. The collapsible tank provides a way to increase capacity for operations that are expected to last for extended periods. The selected site does not require any preparation prior to deployment. The use of the HEMTT-LHS as the prime mover results in increased cross-country mobility. This increased capability is critical to uninterrupted resupply of fuel to maneuver forces.

2) Purpose

The purpose of the Shipping and Storage Instruction (S&SI) is to standardize the requirements for preservation, packaging, packing, marking and maintenance in storage of the US Army’s MFS PRM. These Instructions define the procedures necessary to pack, store, and maintain PRM components in a fully mission capable state. It describes efficient and economical methods for achieving optimal shelf life, utility, and protection of parts and equipment from the point of receipt, at the point of installation, to the return of items for storage and future service.

It is intended as a guide in re-packing the components of the PRM for US Army units having it as assigned equipment or involved in its deployment, use, and recovery.

3) Scope

The S&SI encompasses the preservation, packaging, packing, marking, and cyclic maintenance procedures of the PRM. The S&SI procedures are structured as a step-by-step set of instructions. Details of preservation and complete descriptions for packaging, tailored to the capabilities of user units, are provided. Required blocking, bracing, and tiedown procedures are included, as applicable. Module diagrams are provided for detailing placement of items. Packing lists, which serve as an inventory of material, list the contents of each Module.

4) Objectives

a. To provide preservation packaging, packing, and packaging methods for optimum life, utility, and performance of the PRM, through protection from deterioration and damage.

b. To comply with requirements of Military Standards and Specifications, and laws and regulations that governs the methods and materials used in preservation, storage, transport, and issue of the PRM.

c. To prescribe techniques and materials that provides the necessary protection against corrosion and damage, and adequate identification of PRM components.

d. To provide marking requirements for effective identification, placards, and handling of PRM components, while conforming to military/regulatory standards.

e. To provide cyclic maintenance procedures for PRM components during periods of short and long term storage.

DRS SUSTAINMENT SYSTEMS, INC. Page 4 of 81

5) Definitions Short term and long term storage is defined as follows:

• Short term storage (180 days maximum in an unheated warehouse) – for application when items are in transit. Short term S&S processing is acceptable when the item is intended for immediate use.

• Long term storage – for application when items will be stored 180 days to 2 years in open storage before use.

6) Specifications and Standards

Packaging techniques in this plan are based on MIL-STD-2073-1. OEM packaging and industry standard packs for worldwide shipment are permitted when they meet or exceed this requirement. MIL-STD-129 is used in determining requisite marking, supplemented by MIL-STD-130. Military, federal, and commercial specifications that are referenced or mandated by these Instructions are listed in Section 2.

7) Containerization

The PRM components are installed on specialized ISO 1496-5 and 1496-3 Containers. These have the same handling characteristics as a standard International Standard Organization (ISO) 20’ ISO-1CX Container.

8) Hazardous Materials

Hazardous materials shipped in, on, or with the PRM shall be packaged, packed, and marked, in accordance with the applicable requirements of the CFR Title 29, Title 40 and Title 49, the International Maritime Dangerous Goods Code, or the International Civil Aviation Organization Technical Instructions for the applicable mode of transport.

Special precautions may be necessary for hazardous materials stored with a vehicle for periods of long term storage. All military air shipments containing hazardous materials shall comply with the Joint Service Manual, AFJMAN24-204/TM-38-250/NAVSUP PUB 505/MCO P4030.19F/DLAM 4145.3. As a general rule, Hazardous Materials should not be stored nor shipped with the PRM. When hazardous materials are shipped on the vehicle, increased transportation costs should be anticipated.

Hazardous Material Packaging: All hazardous material shall be shipped in packaging which meets the performance requirements specified in the applicable packaging specification and the mode of transportation regulations cited above.

Hazardous Material Shipment Documentation: All hazardous material shipments shall be supported by documentation certifying that the packaging meets the performance requirements specified in the applicable packaging specifications and the mode of transportation regulations cited above. The shipper, if not a self-certifier, shall be responsible for assuring that third party providers of hazardous material packaging services are, in fact, registered with the Department of Transportation (DOT). The shipper’s signed certification that the packaged configuration meets applicable requirements shall be incorporated on the DD Form 250, Material Inspection and Receiving Report, or other related acceptance document if the DD Form 250 is not used. All certificates and reports shall be available for inspection by authorized Government representatives for a period of three years.

Safety and Health: Processing for shipment and storage and subsequent deprocessing of equipment may involve the use of substances requiring personal protection or exposure precautions. Appropriate safety and health information shall be available to all personnel involved and any data for processing the equipment for shipment and storage for deprocessing shall include all necessary warnings, MSDSs, cautionary markings, etc. Documentation shall accompany the vehicle and insure communication of safety and health issues.

DRS SUSTAINMENT SYSTEMS, INC. Page 5 of 81

9) Marking

All marking identifications and operating data plates applied to the PRM are in accordance with MIL-STD-129 and MIL-STD-130. Markings in black lusterless paint are applied to the PRM module:

“USE 8 FOOT TINES ONLY” -2” letters adjacent to the fork lift pockets on the PRM.

The MFS containers platform for the PRM is marked in accordance with ISO standard 6346, Freight Containers- Coding, Identification and Marking.

Placard requirements are in accordance with 49 CFR 172.504. Data plates are provided for Helicopter Sling Lift (HSL). Each PRM is inspected, tested and marked in accordance with the requirements of DOT 49 CFR 180.415.

The ISO container frames have been certified to the Convention for Safe Containers (CSC) and display a CSC Safety Approval Plate.

10) Cleaning and Drying

Prior to preserving any materiel or equipment an Equipment Inspection and Maintenance Worksheet will be initiated. PRM components will be cleaned of all dirt, debris and corrosion, both internally and externally.

Equipment should be washed on a sloped surface to facilitate water run-off and to speed the overall drying process.

Immediately after cleaning, surfaces shall be thoroughly dried. Drying shall be accomplished by any process that will not harm the vehicle or its components. All cleaning materials should be selected and used in accordance with the applicable Environmental Protection Agency (EPA) Regulations, Occupational Safety and Health Act (OSHA) Standards and Code of Federal Regulations (CFR), Title 29 - General Industry and Air Pollution Control Statutes and Regulations in force for the geographic and industrial area where the cleaning is performed.

CAUTION:

Disassembly of equipment for cleaning and preservation should be kept to a minimum degree necessary. Failure to comply could result in damage to equipment and void the manufacturer’s warranty.

CAUTION

All dust plugs, caps, and covers should be installed prior to cleaning or preserving equipment. Failure to comply could cause internal contamination of equipment.

• Items should be cleaned by any process or combination of processes that will accomplish a thorough cleaning and drying without damaging equipment.

• Loose dirt and debris should be removed, brushed, swept, vacuumed or blown off the equipment.

• Surfaces should be cleaned to ensure complete removal of dirt, soil, corrosion, grease, fingerprints, perspiration and all other acid and alkali residues. Oil, grease, or graphite packed or impregnated items should be cleaned externally by wiping with a clean, dry, lint-free cloth.

• Remove any grease, oil or fuel contamination remaining after initial cleaning, using an approved cleaning solvent prior to preserving the equipment. Entrapped cleaning solvents or other liquids should be drained and the area thoroughly rinsed and dried.

WARNING:

Do not use petroleum based solvents in oxygen, air intake, vacuum or hydraulic systems, except internal combustion engine intake manifolds. Failure to comply could result in serious injury or death to personnel and/or damage to equipment.

• When required, remove surface dirt from equipment using a pressure washer.

DRS SUSTAINMENT SYSTEMS, INC. Page 6 of 81

WARNING:

Do not exceed 1500 PSI water pressure when pressure washing equipment. Failure to comply could result in serious injury or death to personnel and/or damage to equipment.

11) Components of End Item (COEI)

The following items shall be cleaned, preserved, and packaged in accordance with MIL-STD-2073-1D and the following instructions. All packaged items are to be stowed in there assigned stowage location in the PRM, see figures 3 – 8 for item locations.

Note: Sizes of wraps, cushioning, cartons, etc. are listed as approximates only. Variances to sizes are allowable if protection is maintained.

Note: All package materials listed are required for one (1) item.

SEGREGATED

PACK

NUMBER

NATIONAL

STOCK NUMBER PART NUMBER (CAGE) DESCRIPTION QUANTITY

1 N/A 810682-301 (98255) ADAPTOR, 4 in. female X 4 in. female camlock 1

2 N/A 810680-301 (98255) ADAPTOR, COUPLING, 3in. unisex valve X 2 in. unisex valve 6

3 N/A 410-300300-130 (D2274) ADAPTOR, HOSE COUPLING, NATO 1

4 N/A

RN300/3-8 (NPSH)

(D9779) ADAPTOR, NATO (NPSH) G3A X 3-8 1

5 4730-01-543-4019 90007 (33813) ADAPTOR, NATO (NPT) 1

6 6150-01-022-6004 11682336-1 (19207)

CABLE ASSEMBLY, ELECTRICAL

POWER, NATO, intervehicular, 20 ft 1

7 7240-00-089-3827 3819249 (45152) CAN, MILITARY 8

8 N/A 853-300300-130 (D2274) COUPLING HALF, NATO, 3 in. female 1

9 4730-01-298-0151 6432070Q (0DT23)

COUPLING, 2 in. female camlock X 2 in.

unisex valve 2

10 4730-01-298-0150 6432061Q (0DT23)

COUPLING, 2 in male camlock X 2 in.

unisex valve 2

11 N/A 6432071Q (0DT23)

COUPLING, 3 in. female camlock X 2 in.

unisex valve 1

12 N/A 6432062Q (0DT23)

COUPLING, 3 in. male camlock X 2 in.

unisex valve 1

13 4730-01-474-2863 64031MQ (0DT23)

COUPLING, 4 in. female camlock X 3 in.

unisex valve 2

14 4730-01-548-3573 602630401 (33813) COUPLING, 4 in. male camlock X 3 in.

female camlock 1

15 4730-01-543-5141 64031PQ (0DT23)

COUPLING, 4 in. male camlock X 3 in.

unisex valve 1

16 N/A 850-300300-130 (D2274) COUPLING HALF, NATO, 3 in. male 1

17 N/A 832-300300-133 (D2274)

COUPLING HALF, NATO, TANK

TRUCK, female 1

18 N/A 833-300300-130 (D2274)

COUPLING HALF, NATO, TANK

TRUCK, male 1

19 3835-01-414-0464 UK-3 (D1097)

COUPLING, NATO, RAIL TANKER,

ADAPTOR 1

20 4730-01-376-1027 64023D (0DT23) ELBOW, ADAPTOR, 2 in. unsex valves 2 21 4210-01-608-3387 429011 (03670) FIRE EXTINGUISHER, Model PK20 10

DRS SUSTAINMENT SYSTEMS, INC. Page 7 of 81

22 4720-01-610-2495 84006 (0DT23)

HOSE ASSEMBLY, 2 in. X 50 ft with 2 in.

unisex valve with hose end pressure regulator 8

SEGREGATED

PACK

NUMBER

NATIONAL

STOCK NUMBER PART NUMBER (CAGE) DESCRIPTION QUANTITY

23 4720-01-609-2299 84003 (0DT23)

HOSE ASSEMBLY, 3 in. X 50 ft with 2 in.

and 3 in. unisex valve with hose end pressure regulator 4

24 4720-01-609-1447 84004 (0DT23)

HOSE ASSEMBLY, 3 in. X 50 ft with 3in.

unisex valve 11

25 4720-01-609-3551 84008 (0DT23)

HOSE ASSEMBLY, 3 in. X 50 ft with 3 in.

unisex valve and 3 in. male camlocks 11

26 4720-01-610-2605 84002-2 (0DT23)

HOSE ASSEMBLY, 3 in. X 50 ft with 2 in.

and 3 in. unisex valve with hose end pressure regulator ( HEPR) 1

27 N/A 84005 (0DT23)

HOSE ASSEMBLY, RIGID, 4 in. X 15 ft with 4 in.camlock fittings 4

28 4720-01-609-1725 84001-2 (0DT23)

HOSE ASSEMBLY, 2in. x 50 ft with 2 in.

unisex valves 4

29 N/A 13-65SEI (0N54W) KIT, FUEL SPILL CONTROL 1

30 4930-01-630-4798 64211 (0DT23)

NOZZLE, AUTOMATIC SHUT-OFF, 1 in., with 2 in. unisex valve 4

31 4930-01-630-4786 64199 (0DT23)

NOZZLE, AUTOMATIC SHUT-OFF, 1.5

in. with 2 in. unisex valve 8

32 4820-01-631-2979 64017E (0DT23) NOZZLE, CCR, with 2 in. unisex valve 2

33 4930-01-630-4817 64201CHV5 (0DT23)

NOZZLE, D-1 with 2 in. unisex valve, 100 mesh strainer 8

34 4901-01-301-9125 4204T4 (39428) PAN, DRAIN 2

35 4940-01-504-5273 PB6C10 (4N5U7) PAN, DRIP 10

36 4730-01-548-2611 602640201 (33813) REDUCER, 4 in. female camlock X 2 in.

male camlock 2

37 N/A 602840-301 (33813) REDUCER, 4 in. male camlock X 3 in.

male camlock 1

38 N/A 602640601 (33813) REDUCER, 6 in male camlock X 4in.

female camlock 1

39 4730-01-548-0899 602640301 (33813) REDUCER, 4in. female camlock x 3 in.

male camlock 1

40 5975-01-050-5707 13219E0462 (19207) ROD, GROUNDING 9

41 N/A 8105070-301 STRAP ASSEMBLY 8

42 N/A 810571-301 STRAP ASSEMBLY 8

43 N/A 810595-301 STRAP ASSEMBLY, hose coil 29 44 4730-01-631-4618 64190 (0DT23) TEE, 3in., unisex valve 5

45 N/A 810117-301 (33813) TEE ASSY, 4 in. female camlock X 4 in.

male camlock X 4 in. female camlock 2

46 4730-01-297-6812 64022D (0DT23) TEE, 2 in. unisex valve 2

47 6630-01-558-5109 57K6311 (19207) TESTING KIT, FUEL 1

ON-BOARD SPARES

For 3 In. Unisex Coupling:

48 2910-01-456-2274 220468 (0DT23) CAP, BUMPER 6

49 5330-01-460-8998 220467 (0DT23) SEAL, PLAIN 12

DRS SUSTAINMENT SYSTEMS, INC. Page 8 of 81

For 2 In. Unisex

50 2510-01-456-7850 220161 (0DT23) CAP, BUMPER 4

51 5330-01-433-9203 220146 (0DT23) SEAL, PLAIN 14

SEGREGATED

PACK

NUMBER

NATIONAL

STOCK NUMBER PART NUMBER (CAGE) DESCRIPTION QUANTITY

For 4 In. Camlock

52 4730-00-623-7537 AA59326/10-9 (58536) CAP, DUST 2

53 5330-01-557-1178 AA59326-9 (58536) GASKET 5

54 4730-00-640-6188 AA59326/11-9-A (58536) PLUG,DUST 2

For 3 In. Camlock

55 N/A GF27029-15-TN (0DT23) CAP,DUST 1

56 5330-00-088-9466 AA59326-G8 (58536) GASKET 2

57 N/A GF27028-15-TN (0DT23) PLUG, DUST 1

For 2 In. Camlock

58 N/A GF27029-11-TN (0DT23) CAP, DUST 1

59 5330-00-612-2414 AA59326-G6 (58536) GASKET 2

60 N/A GF27028-11-TN (0DT23) PLUG, DUST 1

For 2 In. Unisex Coupling

(CAGE 61125):

61 N/A RJ0001 (61125) CAP, BUMPER 1

62 N/A RJ0009 (61125) SEAL, PLAIN 2

For 2 In. Unisex Coupling

(CAGE 61125):

63 N/A RJ0131 (61125) CAP, BUMPER 1

64 N/A RJ0139 (61125) SEAL, PLAIN 2

A. Prepare Segregated Pack Number 1, Part Number 810682-301 (98255), ADAPTOR, 4 in. female X 4 in.

female camlock, Quantity: 1, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 30 X 16 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 24 X 26. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

B. Prepare Segregated Pack Number 2, Part Number 810680-301 (98255), ADAPTOR, COUPLING, 3in.

unisex valve X 2 in. unisex valve, Quantity: 6, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 24 X 16 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 24 X 26. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

C. Prepare Segregated Pack Number 3, Part Number 410-300300-130 (D2274), ADAPTOR, HOSE COUPLING, NATO, Quantity: 3, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 24 X 16 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 24 X 26. Close bag by heat seal.

DRS SUSTAINMENT SYSTEMS, INC. Page 9 of 81

3. Identification: Identify item with part number, quantity and segregated pack number as shown in COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

D. Prepare Segregated Pack Number 4, Part Number RN300/3-8 (NPSH) (D9779), ADAPTOR, NATO (NPSH) G3A X 3-8, Quantity: 1, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 18 X 12 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 12 X 14. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

E. Prepare Segregated Pack Number 5, Part Number 90007 (33813), ADAPTOR, NATO (NPT), Quantity: 1, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 24 X 16 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 24 X 26. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

F. Prepare Segregated Pack Number 6, Part Number 11682336-1 (19207), CABLE ASSEMBLY, ELECTRICAL POWER, NATO, intervehicular, 20 ft, Quantity: 1, as follows:

1. Item Preparation: Coil item to 21 X 21 X 6 inch dimensions.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 30 X 30. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

G. Prepare Segregated Pack Number 7, Part Number 3819249 (45152), CAN, MILITARY, Quantity: 8, as follows:

1. Place item in designated holder on PRM.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list. Identification must be in an environmental proof method.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 10.

H. Prepare Segregated Pack Number 8, Part Number 853-300300-130 (D2274), COUPLING HALF, NATO, 3 in.

female, Quantity: 1, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 30 X 16 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 24 X 26. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

I. Prepare Segregated Pack Number 9, Part Number 6432070Q (0DT23), COUPLING, 2 in. female camlock X 2 in. unisex valve, Quantity: 2, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 30 X 16 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 24 X 26. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

J. Prepare Segregated Pack Number 10, Part Number 6432061Q (0DT23), COUPLING, 2 in male camlock X 2

in. unisex valve, Quantity: 2, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 30 X 16 X 1/4” Thickness, Wrap item in foam, secure with tape.

DRS SUSTAINMENT SYSTEMS, INC. Page 10 of 81

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 24 X 26. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

K. Prepare Segregated Pack Number 11, Part Number 6432071Q (0DT23), COUPLING, 3 in. female camlock X 2 in. unisex valve, Quantity: 1, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 24 X 17 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 14 X 20. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

L. Prepare Segregated Pack Number 12, Part Number 6432062Q (0DT23), COUPLING, 3 in. male camlock X 2

in. unisex valve, Quantity: 1, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 24 X 18 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 14 X 20. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

M. Prepare Segregated Pack Number 13, Part Number 64031MQ (0DT23), COUPLING, 4 in. female camlock X 3 in. unisex valve, Quantity: 2, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 28 X 20 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 16 X 22. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

N. Prepare Segregated Pack Number 14, Part Number 64031MQ (0DT23), COUPLING, 4 in. male camlock X 3

in. female camlock, Quantity: 1, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 28 X 20 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 16 X 22. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

O. Prepare Segregated Pack Number 15, Part Number 64031PQ (0DT23), COUPLING, 4 in. male camlock X 3

in. unisex valve, Quantity: 1, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 28 X 18 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 16 X 20. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

P. Prepare Segregated Pack Number 16, Part Number 64031MQ (0DT23), COUPLING HALF, NATO, 3 in.

male, Quantity: 1, as follows:

1. Wrap: MIL-PRF-131, CL 1, Size: 26 X 16, Wrap item entirely with paper, secure with tape.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 10.

Q. Prepare Segregated Pack Number 17, Part Number 832-300300-133 (D2274), COUPLING HALF, NATO, TANK TRUCK, female, Quantity: 1, as follows:

DRS SUSTAINMENT SYSTEMS, INC. Page 11 of 81

1. Wrap: MIL-PRF-131, CL 1, Size: 12 X 20, Wrap item entirely with paper, secure with tape.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 10.

R. Prepare Segregated Pack Number 18, Part Number 832-300300-133 (D2274), COUPLING HALF, NATO, TANK TRUCK, female, Quantity: 1, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 30 X 16, X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 18 X 18. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

S. Prepare Segregated Pack Number 19, Part Number UK-3 (D1097), COUPLING, NATO, RAIL TANKER, ADAPTOR, Quantity: 1, as follows:

1. Wrap: MIL-PRF-131, CL 1, Size: 40 X 22, Wrap item entirely with paper, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 26 X 26. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

T. Prepare Segregated Pack Number 20, 64023D (0DT23), ELBOW, ADAPTOR, 2 in. unsex valves Quantity: 2, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 30 X 18, X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 18 X 20. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

U. Prepare Segregated Pack Number 21, 429011 (03670), FIRE EXTINGUISHER, Model PK20, Quantity: 10, as follows:

For fire extinguishers located inside of storage unit (Quantity 8):

1. Cushioning: A-A-59135, CL 1, GR A, Size: 30 X 18, X 1/8” Thickness, Wrap item in foam, secure with tape.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 10.

For fire extinguishers located outside of the storage unit (Quantity 2):

1. Cushioning: ASTM-D4727, TY CF, CL WR, GR W5c, VR SW, See Figures 1 & 2 for sizes and locations.

2. Container: ASTM-D5118, TY CF, ST RSC, CL WR, GR W5c, VR SW, Size: 10-1/4 X 8-1/2 X 24-

1/4, Close container in accordance with ASTM-D1974, Method 2B1.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list. Additional markings will be included for the fire extinguisher denoting item as hazardous class 2.2 in accordance with CFR Titel 29, 40, and 49.

4. Placement: Packaged fire extinguishers are to be placed inside the storage cabinet between the spill kit and hoses, see Figure 8.

5. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 10.

DRS SUSTAINMENT SYSTEMS, INC. Page 12 of 81

FIGURE 1 – SPN 21 Cushioning

1) CORRUGATED PADS SHALL CONFORM TO ASTM-D ASTM-D5118,

TY CF, CL WR, GR V11c, VR DW SIZE: 19-1/4 X 7-7/8, QUANTITY 5.

2) CORRUGATED INSERT SHALL CONFORM TO ASTM-D ASTM-D5118,

TY CF, CL WR, GR V11c, VR DW, QUANTITY 1.

3) TOP CORRUGATED COLLAR SHALL CONFORM TO ASTM-D ASTM-

D5118, TY CF, CL WR, GR V11c, VR DW SIZE: 36-3/4 X 4-3/8 (FLAT

LAYOUT), QUANTITY 1.

4) BOTTOM CORRUGATED COLLAR SHALL CONFORM TO ASTM-D

ASTM-D5118, TY CF, CL WR, GR V11c, VR DW SIZE: 36-3/4 X 19-1/4

(FLAT LAYOUT), QUANTITY 1.

NOTE: BUNDLES OF PADS ARE TO BE SECURED TOGETHER USING GLUE

OR TAPE; QUANTITIES SHOWN ARE REQUIRED FOR EACH FIRE

EXTINGUISHER.

DRS SUSTAINMENT SYSTEMS, INC. Page 13 of 81

FIGURE 2 – SPN 21 Item 3 & 4 Dimensions

TOP CORRUGATED COLLAR (FLAT LAYOUT)

BOTTOM CORRUGATED COLLAR (FLAT LAYOUT)

FLUTE

DIRECTION

DRS SUSTAINMENT SYSTEMS, INC. Page 14 of 81

V. Prepare Segregated Pack Number 22, Part Number 84006 (0DT23), HOSE ASSEMBLY, 2 in. X 50 ft with 2

in. unisex valve with hose end pressure regulator, Quantity: 8, as follows:

1. Item Preparation: Coil hose assembly to 29 X 23 X 6 inch dimensions.

2. Cushioning: A-A-59135, CL 1, GR A, Size: 24 X 24 X 1/4” Thickness, Quantity 2, Wrap item ends in foam, secure with tape.

3. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 42 X 36, Close bag by heat seal.

4. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

5. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 33.

W. Prepare Segregated Pack Number 23, Part Number 84003 (0DT23), COUPLING HALF, NATO, TANK TRUCK, female, Quantity: 4, as follows:

1. Item Preparation: Coil hose assembly to 29 X 23 X 7 inch dimensions.

2. Cushioning: A-A-59135, CL 1, GR A, Size: 24 X 24 X 1/4” Thickness, Quantity 2, Wrap item ends in foam, secure with tape.

3. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 42 X 36, Close bag by heat seal.

4. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

5. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 33.

X. Prepare Segregated Pack Number 24, Part Number 84004 (0DT23), HOSE ASSEMBLY, 3 in. X 50 ft with 3in. unisex valve, Quantity: 11, as follows:

1. Item Preparation: Coil hose assembly to 29 X 23 X 7 inch dimensions.

2. Cushioning: A-A-59135, CL 1, GR A, Size: 24 X 24 X 1/4” Thickness, Quantity 2, Wrap item ends in foam, secure with tape.

3. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 42 X 36, Close bag by heat seal.

4. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

5. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 33.

Y. Prepare Segregated Pack Number 25, Part Number 84008 (0DT23), HOSE ASSEMBLY, 3 in. X 50 ft with 3

in. unisex valve and 3 in. male camlocks, Quantity: 11, as follows:

1. Item Preparation: Coil hose assembly to 29 X 23 X 7 inch dimensions.

2. Cushioning: A-A-59135, CL 1, GR A, Size: 24 X 24 X 1/4” Thickness, Wrap item ends in foam, secure with tape.

3. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 42 X 36, Close bag by heat seal.

4. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

5. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 33.

Z. Prepare Segregated Pack Number 26, Part Number 84002-2 (0DT23), HOSE ASSEMBLY, 3 in. X 50 ft with 2

in. and 3 in. unisex valve with hose end pressure regulator ( HEPR), Quantity: 1, as follows:

1. Item Preparation: Coil hose assembly to 22 X 19 X 7-1/2 inch dimensions.

2. Cushioning: A-A-59135, CL 1, GR A, Size: 24 X 24 X 1/4” Thickness, Wrap item ends in foam, secure with tape.

3. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 28 X 27, Close bag by heat seal.

4. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

5. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 33.

DRS SUSTAINMENT SYSTEMS, INC. Page 15 of 81

AA. Prepare Segregated Pack Number 27, Part Number 84005 (0DT23), HOSE ASSEMBLY, RIGID, 4 in. X 15 ft with 4 in.camlock fittings, Quantity: 4, as follows:

1. Wrap: MIL-PRF-131, CL 1, Size: 190 X 34, Wrap item entirely with paper, secure with tape.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 10.

BB. Prepare Segregated Pack Number 28, Part Number 84001-2 (0DT23), HOSE ASSEMBLY, 2 in. X 50 ft with 2

in. unisex valves, Quantity: 4, as follows:

1. Item Preparation: Coil hose assembly to 29 X 23 X 6 inch dimensions.

2. Cushioning: A-A-59135, CL 1, GR A, Size: 24 X 24 X 1/4” Thickness, Quantity 2, Wrap item ends in foam, secure with tape.

3. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 42 X 36, Close bag by heat seal.

4. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

5. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 33.

CC. Prepare Segregated Pack Number 29, Part Number 13-65SEI (0N54W), KIT, FUEL SPILL CONTROL, Quantity: 1, as follows:

1. Identification: Identify item with part number, quantity and segregated pack number as shown in COEI list.

2. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 10.

DD. Prepare Segregated Pack Number 30, Part Number 64211 (0DT23), NOZZLE, AUTOMATIC SHUT-OFF, 1 in., with 2 in. unisex valve, Quantity: 4, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 48 X 26 X 1/4” Thickness, Double wrap item with foam, secure with tape.

2. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 18 X 28, Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

EE. Prepare Segregated Pack Number 31, Part Number 64199 (0DT23), NOZZLE, AUTOMATIC SHUT-OFF, 1.5

in. with 2 in. unisex valve, Quantity: 8, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 48 X 24 X 1/4” Thickness, Double wrap item with foam, secure with tape.

2. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 26 X 26, Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

FF. Prepare Segregated Pack Number 32, Part Number 64017E (0DT23), NOZZLE, CCR, with 2 in. unisex valve, Quantity: 2, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 48 X 26 X 1/4” Thickness, Double wrap item with foam, secure with tape.

2. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 20 X 26, Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

DRS SUSTAINMENT SYSTEMS, INC. Page 16 of 81

GG. Prepare Segregated Pack Number 33, Part Number 64201CHV5 (0DT23), NOZZLE, D-1 with 2 in. unisex valve, 100 mesh strainer, Quantity: 8, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 48 X 30 X 1/4” Thickness, Double wrap item with foam, secure with tape.

2. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 24 X 34, Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

HH. Prepare Segregated Pack Number 34, Part Number 4204T4 (39428), PAN, DRAIN, Quantity: 2, as follows:

1. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

2. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

II. Prepare Segregated Pack Number 35, Part Number PB6C10 (4N5U7), PAN, DRIP, Quantity: 2, as follows:

1. Identification: Identify item with part number, quantity and segregated pack number as shown in

2. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

JJ. Prepare Segregated Pack Number 36, Part Number 602640201 (33813), REDUCER, 4 in. female camlock X 2 in. male camlock, Quantity 2 as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 16 X 28 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 18 X 18, Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

KK. Prepare Segregated Pack Number 37, Part Number 602840-301 (33813), REDUCER, 4 in. male camlock X 3

in. male camlock, Quantity 1 as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 16 X 28 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 18 X 18, Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

LL. Prepare Segregated Pack Number 38, Part Number 602640601 (33813), REDUCER, 6 in male camlock X 4in. female camlock, Quantity 1 as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 20 X 36 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 24 X 24, Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

MM. Prepare Segregated Pack Number 39, Part Number 602640301 (33813), REDUCER, 4 in. female camlock

X 3 in. male camlock, Quantity 1 as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 16 X 28 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY II, CL C, ST 1, Size 18 X 18, Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

DRS SUSTAINMENT SYSTEMS, INC. Page 17 of 81

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

NN. Prepare Segregated Pack Number 40, Part Number 13219E0462 (19207) ROD,GROUNDING Quantity: 9, as follows:

1. Wrap: MIL-PRF-131, CL 1, Size: 18 X 72, Wrap item entirely with paper, secure with tape.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 10.

OO. Prepare Segregated Pack Number 41, Part Number 8105070-301, STRAP ASSEMBLY, Quantity: 8, as follows:

1. Item Preparation: Coil item to 8 X 6 X 4 inch dimensions.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 14 X 16. Close bag by heat seal or tape.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 10.

PP. Prepare Segregated Pack Number 42, Part Number 810571-301, STRAP ASSEMBLY, Quantity: 8, as follows:

1. Item Preparation: Coil item to 10 X 8 X 5 inch dimensions.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 16 X 20. Close bag by heat seal or tape.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 10.

QQ. Prepare Segregated Pack Number 43, Part Number 810595-301, STRAP ASSEMBLY, hose coil, Quantity:

29, as follows:

1. Item Preparation: Coil item to 12 X 10 X 6 inch dimensions.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 18 X 24. Close bag by heat seal or tape.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 10.

RR. Prepare Segregated Pack Number 44, Part Number 64190 (0DT23), TEE, 3in., unisex valve, Quantity: 5, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 24 X 36 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 22 X 28. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

4. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

SS. Prepare Segregated Pack Number 45, Part Number 810117-301 (33813), TEE ASSY, 4 in. female camlock X 4 in. male camlock X 4 in. female camlock, Quantity: 2, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 26 X 40 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 44 X 30. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

DRS SUSTAINMENT SYSTEMS, INC. Page 18 of 81

TT. Prepare Segregated Pack Number 46, Part Number 64022D (0DT23), TEE, 2 in., unisex valve, Quantity: 2, as follows:

1. Cushioning: A-A-59135, CL 1, GR A, Size: 24 X 36 X 1/4” Thickness, Wrap item in foam, secure with tape.

2. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 22 X 28. Close bag by heat seal.

3. Identification: Identify item with part number, quantity and segregated pack number as shown in

UU. Prepare Segregated Pack Number 47, Part Number 57K6311 (19207), TESTING KIT, FUEL, Quantity: 1, as

1. Identification: Identify item with part number, quantity and segregated pack number as shown in COEI list.

2. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 10.

VV. Prepare Segregated Pack Number 48, Part Number 220468 (0DT23), CAP, BUMPER, Quantity: 6, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 10 X 24. Place all items in bag, close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

WW. Prepare Segregated Pack Number 49, Part Number 220467 (0DT23), SEAL, PLAIN, Quantity: 12, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 12 X 12. Place all items in bag, close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

XX. Prepare Segregated Pack Number 50, Part Number 220161 (0DT23), CAP, BUMPER, Quantity: 4 as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 8 X 18. Place all items in bag, close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

YY. Prepare Segregated Pack Number 51, Part Number 220146 (0DT23), SEAL, PLAIN, Quantity: 14, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 12 X 12. Place all items in bag, close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

ZZ. Prepare Segregated Pack Number 52, Part Number AA59326/10-9 (58536), CAP, DUST Quantity: 2, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 10 X 12. Place all items in bag, close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

AAA. Prepare Segregated Pack Number 53, Part Number AA59326-9 (58536),GASKET, Quantity: 5, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 8 X 10. Place all items in bag, close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

DRS SUSTAINMENT SYSTEMS, INC. Page 19 of 81

BBB. Prepare Segregated Pack Number 54, Part Number AA59326/11-9-A (58536), PLUG, DUST, Quantity: 2, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 10 X 12. Place all items in bag, close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

CCC. Prepare Segregated Pack Number 55, Part Number GF27029-15-TN (0DT23), CAP, DUST, Quantity: 1, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 10 X 12. Place all items in bag, close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

DDD. Prepare Segregated Pack Number 56, Part Number AA59326-G8 (58536), GASKET, Quantity: 2, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 10 X 12. Place all items in bag, close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

EEE. Prepare Segregated Pack Number 57, Part Number GF27028-15-TN (0DT23), PLUG, DUST, Quantity: 1, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 10 X 12. Place all items in bag, close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

FFF. Prepare Segregated Pack Number 58, Part Number GF27029-11-TN (0DT23),PLUG, DUST, Quantity: 1, as

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 6 X 8. Close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

GGG. Prepare Segregated Pack Number 59, Part Number AA59326-G6 (58536), GASKET, Quantity: 2, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 6 X 8. Place all items in bag, close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

HHH. Prepare Segregated Pack Number 60, Part Number GF27028-11-TN (0DT23), PLUG, DUST, Quantity: 1, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 6 X 8. Close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

DRS SUSTAINMENT SYSTEMS, INC. Page 20 of 81

III. Prepare Segregated Pack Number 61, Part Number RJ0001 (61125), CAP, BUMPER, Quantity: 1, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 6 X 8. Close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

JJJ. Prepare Segregated Pack Number 62, Part Number RJ0009 (61125), SEAL, PLAIN, Quantity: 2, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 5 X 7. Place all items into bag, close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

KKK. Prepare Segregated Pack Number 63, Part Number RJ0131 (61125), CAP, BUMPER, Quantity: 1, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 6 X 8. Close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

COEI list.

3. Inspection: Inspect in accordance with MIL-STD-2073-1D, criteria for preservation, Method 31.

LLL. Prepare Segregated Pack Number 64, Part Number RJ0131 (61125), SEAL PLAIN, Quantity: 2, as follows:

1. Bag: MIL-DTL-117, TY III, CL B, ST 2, Size: 5 X 7. Place all items into bag, close bag by heat seal.

2. Identification: Identify item with part number, quantity and segregated pack number as shown in

12) Basic Issue Items (BII)

The following items shall be cleaned, preserved, and packaged in accordance with MIL-STD-2073-1D and the following instructions. All packaged items are to be stowed in there assigned stowage location in the PRM, see figures 3 – 8 for item locations.

Note: Sizes of wraps, cushioning, cartons, etc.