102800 - TOILET_ BATH_ AND LAUNDRY ACCESSORIES.pdf

NGBJV/ILL-RENOVATE BUILDING P-17 183dWing-Illinois Air National Guard Springfield, IL.

Addendum #03 04/07/2021

TOILET, BATH, AND LAUNDRY ACCESSORIES

102800 - 1

SECTION 102800 - TOILET, BATH, AND LAUNDRY ACCESSORIES (Addendum #03)

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes:

1. Public-use washroom accessories.

2. Public-use shower room accessories.

B. Related Requirements:

1. Section 093013 "Ceramic Tiling" for ceramic toilet and bath accessories.

C. Limited List of Products: Where Specifications include a list of names of both manufacturers and Products, provide one of the Products listed that comply with the requirements.

1. All Products should comply with the requirements identified in Unified Facilities Criteria (UFC) 1-200-02 - High Performance and Sustainable Building Requirements. Product compliance will be evaluated by the Design Team based on the latest version of the UFC at the date of Bidding.

D. Submittal with an "S" are for inclusion in the Sustainability eNotebook, in conformance with Section 013329 Sustainability Reporting. Refer also to 013300 PFOIL Form (submittal register).

1.2 COORDINATION

A. Coordinate accessory locations with other work to prevent interference with clearances required for access by people with disabilities, and for proper installation, adjustment, operation, cleaning, and servicing of accessories.

B. Deliver inserts and anchoring devices set into concrete or masonry as required to prevent delaying the Work.

102800 - 2

1.3 ACTION SUBMITTALS

A. Product Data: For each type of product.

1. Include construction details, material descriptions, dimensions of individual components and profiles, and finishes.

2. Include anchoring and mounting requirements, including requirements for cutouts in other work and substrate preparation.

3. Include electrical characteristics.

B. Product Schedule: Indicating types, quantities, sizes, and installation locations by room of each accessory required.

1. Identify locations using room designations indicated.

2. Identify accessories using designations indicated.

1.4 CLOSEOUT SUBMITTALS

A. Maintenance Data: For accessories to include in maintenance manuals.

1.5 WARRANTY

A. Manufacturer's Special Warranty for Mirrors: Manufacturer agrees to repair or replace mirrors that fail in materials or workmanship within specified warranty period.

1. Failures include, but are not limited to, visible silver spoilage defects.

2. Warranty Period: 15 years from date of Substantial Completion.

PART 2 - PRODUCTS

2.1 PERFORMANCE REQUIREMENTS

A. Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70, by a qualified testing agency, and marked for intended location and application.

B. Structural Performance: Design accessories and fasteners to comply with the following requirements:

102800 - 3

1. Grab Bars: Installed units are able to resist 250 lbf concentrated load applied in any direction and at any point, tested in accordance with ASTM F 446.

2. Shower Seats: Installed units are able to resist 250 lbf applied in any direction and at any point, tested in accordance with ASTM F 446.

2.2 PUBLIC-USE WASHROOM ACCESSORIES

A. Source Limitations: Obtain public-use washroom accessories from single source from single manufacturer.

B. Toilet Tissue (Roll) Dispenser :

1. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following:

a. A&J Washroom Accessories, Inc.

b. American Specialties, Inc.; ASI Group.

c. Bobrick Washroom Equipment, Inc. (B-6977)

d. Bradley Corporation.

2. Description: Double-roll dispenser.

3. Mounting: Recessed.

4. Operation: Noncontrol delivery with standard spindle.

5. Capacity: Designed for 5-inch- diameter tissue rolls.

6. Material and Finish: Stainless steel, No. 4 finish (satin).

C. Paper Towel (Folded) Dispenser :

1. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following:

a. A&J Washroom Accessories, Inc.

b. American Specialties, Inc.; ASI Group.

c. Bobrick Washroom Equipment, Inc. (B-262)

d. Bradley Corporation.

2. Mounting: Surface mounted.

3. Minimum Capacity: 400 C-fold or 525 multifold towels.

102800 - 4

4. Material and Finish: Stainless steel, No. 4 finish (satin).

5. Lockset: Tumbler type.

6. Refill Indicator: Pierced slots at sides or front.

D. Waste Receptacle :

1. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following:

a. A&J Washroom Accessories, Inc.

b. American Specialties, Inc.; ASI Group.

c. Bobrick Washroom Equipment, Inc. (B-279)

d. Bradley Corporation.

2. Mounting: Surface mounted.

3. Minimum Capacity: 6.4 gal. .

4. Material and Finish: Stainless steel, No. 4 finish (satin).

5. Liner: Reusable vinyl liner.

6. Lockset: Tumbler type for waste receptacle.

E. Liquid-Soap Dispenser :

1. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following:

a. A&J Washroom Accessories, Inc.

b. American Specialties, Inc.; ASI Group.

c. Bobrick Washroom Equipment, Inc. (B-2111)

d. Bradley Corporation.

2. Description: Designed for dispensing antibacterial soap in liquid or lotion lather form.

3. Mounting: Vertically oriented, surface mounted.

4. Capacity: 40 oz.

5. Materials: Satin Stainless Steel.

6. Lockset: Tumbler type.

7. Refill Indicator: Window type.

F. Grab Bar :

102800 - 5

1. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following:

a. A&J Washroom Accessories, Inc.

b. American Specialties, Inc.; ASI Group.

c. Bobrick Washroom Equipment, Inc.

1) Rear Wall: B-5806.99 x 36

2) Side Wall: B-5806.99 x 42

3) Vertical Bar: B-5806.99 x 18

d. Bradley Corporation.

2. Mounting: Flanges with concealed fasteners.

3. Material: Stainless steel, 0.05 inch thick.

a. Finish: Smooth, No. 4 finish (satin) on ends and slip-resistant texture in grip area.

4. Outside Diameter: 1-1/4 inches.

5. Configuration and Length: As indicated on Drawings.

G. Sanitary-Napkin Disposal Unit :

1. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following:

a. A&J Washroom Accessories, Inc.

b. American Specialties, Inc.; ASI Group.

c. Bobrick Washroom Equipment, Inc. (B-254)

d. Bradley Corporation.

2. Mounting: Surface mounted.

3. Door or Cover: Self-closing, disposal-opening cover and hinged face panel with tumbler lockset.

4. Receptacle: Removable.

5. Material and Finish: Stainless steel, No. 4 finish (satin).

H. Seat-Cover Dispenser :

102800 - 6 the following:

a. A&J Washroom Accessories, Inc.

b. American Specialties, Inc.; ASI Group.

c. Bobrick Washroom Equipment, Inc. (B-221)

d. Bradley Corporation.

2. Mounting: Surface mounted.

3. Minimum Capacity: 250 seat covers.

4. Exposed Material and Finish: Stainless steel, No. 4 finish (satin).

5. Lockset: Tumbler type.

I. Mirror Unit :

1. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following:

a. A&J Washroom Accessories, Inc.

b. American Specialties, Inc.; ASI Group.

c. Bobrick Washroom Equipment, Inc. (B-165 2436)

d. Bradley Corporation.

2. Frame: Stainless steel channel.

a. Corners: Mitered and mechanically interlocked.

3. Hangars: Produce rigid, tamper and theft resistant installation, using method indicated below.

a. One-piece, galvanized-steel, wall-hanger device with spring-action locking mechanism to hold mirror unit in position with no exposed screws or bolts.

b. Wall bracket of galvanized steel, equipped with concealed locking devices requiring a special tool to remove.

4. Size: As indicated on Drawings.

102800 - 7

2.3 PUBLIC-USE SHOWER ROOM ACCESSORIES

A. Source Limitations: Obtain public-use shower room accessories from single source from single manufacturer.

B. Shower Curtain Rod :

1. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following:

a. A&J Washroom Accessories, Inc.

b. American Specialties, Inc.; ASI Group.

c. Bobrick Washroom Equipment, Inc.

d. Bradley Corporation.

2. Description: 1-1/4-inch- outside diameter, straight rod.

3. Configuration: As indicated on Drawings

4. Mounting Flanges: Concealed fasteners; in material and finish matching rod.

5. Rod Material and Finish: Stainless steel, No. 4 finish (satin).

C. Shower Curtain :

1. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following:

a. A&J Washroom Accessories, Inc.

b. American Specialties, Inc.; ASI Group.

c. Bobrick Washroom Equipment, Inc.

d. Bradley Corporation.

2. Size: Minimum 12 inches wider than opening by 72 inches high.

3. Color: White.

4. Grommets: Corrosion resistant at minimum 6 inches o.c. through top hem.

5. Shower Curtain Hooks: Chrome-plated or stainless steel, spring wire curtain hooks with snap fasteners, sized to accommodate specified curtain rod. Provide one hook per curtain grommet.

D. Folding Shower Seat :

102800 - 8 the following:

a. A&J Washroom Accessories, Inc.

b. American Specialties, Inc.; ASI Group.

c. Bobrick Washroom Equipment, Inc. (B-5181)

d. Bradley Corporation.

2. Configuration: L-shaped seat, designed for wheelchair access.

3. Mounting Mechanism: Stainless steel, No. 4 finish (satin).

2.4 MATERIALS

A. Stainless Steel:ASTM A666, Type 304, 0.031-inch- minimum nominal thickness unless otherwise indicated.

B. Galvanized-Steel Sheet: ASTM A653/A653M, with G60 hot-dip zinc coating.

C. Galvanized-Steel Mounting Devices: ASTM A153/A153M, hot-dip galvanized after fabrication.

D. Fasteners: Screws, bolts, and other devices of same material as accessory unit, unless otherwise recommended by manufacturer or specified in this Section, and tamper and theft resistant where exposed, and of stainless or galvanized steel where concealed.

E. Mirrors: ASTM C1503, Mirror Glazing Quality, clear-glass mirrors, nominal 6.0 mm thick.

2.5 FABRICATION

A. General: Fabricate units with tight seams and joints, and exposed edges rolled. Hang doors and access panels with full-length, continuous hinges. Equip units for concealed anchorage and with corrosion-resistant backing plates.

B. Keys: Provide universal keys for internal access to accessories for servicing and resupplying.

Provide minimum of six keys to Owner's representative.

102800 - 9

PART 3 - EXECUTION

3.1 INSTALLATION

A. Install accessories according to manufacturers' written instructions, using fasteners appropriate to substrate indicated and recommended by unit manufacturer. Install units level, plumb, and firmly anchored in locations and at heights indicated.

1. Remove temporary labels and protective coatings.

B. Grab Bars: Install to comply with specified structural-performance requirements.

C. Shower Seats: Install to comply with specified structural-performance requirements.

3.2 ADJUSTING AND CLEANING

A. Adjust accessories for unencumbered, smooth operation. Replace damaged or defective items.

B. Clean and polish exposed surfaces according to manufacturer's written instructions.

END OF SECTION 102800