Solicitation - Attachment 4 - BACnet_AutomatedLogic_Control_Module-SE6104CS-SPEC_Sheet.pdf

CONTROLLERS FOR THE WEBCTRL® BUILDING AUTOMATION SYSTEM

The Automated Logic® SE controllers are an integral component of the WebCTRL building automation system. The SE controllers are fully programmable, native BACnet advanced application controllers that provide a rugged solution for single-equipment applications. Designed to operate in a wide range of environmental conditions, SE controllers can be used inside rooftop units, mechanical rooms, equipment closets, or almost any other weather-tight location.

Part Number Part# EQT2

KEY FEATURES AND BENEFITS

Versatile controller suitable for a variety of applications, including rooftop units and lighting

Standard library of control programs available for most applications

Supports EIKON® graphical programming software, an object oriented tool that provides complete flexibility for any custom control sequence that you need

Supports Automated Logic communicating ZS sensors, which are available in a variety of zone and equipment sensing combinations, and support setpoint adjustment and occupancy overrides

Supports OptiPoint™ touchscreen interfaces for managing and troubleshooting the connected equipment easily and for occupant engagement

Supports live, visual displays of control logic, helping operators troubleshoot and optimize system operations

Hardware Features

Controls up to 20 points (6 binary outputs, 10 universal inputs, and 4 analog outputs)

High-speed, native BACnet over over ARC156 communications delivers high speed response when you need it. BACnet over MS/TP communication is also supported

Fast, powerful, and fully distributed control allows complete independence from any other devices in the system

Firmware upgrades can be performed remotely

Easy start-up and commissioning using the WebCTRL system user interface

24 Vac Models: TBPL-24-H-A, TBPL-24-HM-A

SE6104A AND

SE6104SP

SINGLE EQUIPMENT CONTROLLERS

Application Features

The WebCTRL building automation system gives you the ability to understand your building operations and analyze the results. Integrate environmental, energy, security and safety systems into one powerful management tool that helps you reduce energy consumption, increase occupant comfort, and achieve sustainable building operations.

https://twitter.com/AutomatedLogic

1150 Roberts Boulevard, Kennesaw, Georgia 30144 770-429-3000 • Fax 770-429-3001 | automatedlogic.com | A Carrier Company

Assembled in the United States

Part # SE6104a and SE6104sp SIngle Equipment Controllers

BACnet Conformance Conforms to the BACnet Advanced Application Controller (B-AAC) Standard Device Profile as defined in ANSI/ASHRAE Standard 135-2012 (BACnet) Annex L, Protocol Revision 9

Power 24 Vac +/- 10%, 50 - 60 Hz, 20 VA (38.4 VA with a BACview® device attached) single Class 2 source only, 100 VA or less

Communication

BACnet Port Communication with the controller network using ARC156 or MS/TP at 9,600 bps to 76.8 kbps

Local Access Port For system start-up and troubleshooting

Rnet Port 12 VDC @ 210 mA supporting:

-Up to 15 ZS wireless and/or ZS sensors (SE6104a); Up to 5 ZS wireless and/or ZS sensors (SE6104sp) -One Equipment Touch or OptiPoint equipment interfaces

LogiStat Port Supports LogiStat and LogiStat Plus zone sensors and uses 2 universal inputs

Inputs

Resolution 12 bit A/D

Pulse Frequency 40 pulses per second. Minimum pulse width required for each pulse is 12.5 msec

Outputs

Resolution 8 bit A/D

Analog Output 4 analog outputs, 0-10 Vdc or 0-20 mA selectable

Digital Output 6 digital outputs, relay contacts rated at 3 A max @ 24 Vac. Configured normally open

Program Capabilities SE6104a: Driver - DRV_SE; BACnet Objects - up to 600; Programs - up to 5 SE6104sp: Driver - DRV_SESP; BACnet Objects - up to 400; Programs - 1

Status Indicators LED’s indicate status of communications, running, errors, power, and digital outputs

Microprocessor High-speed 16-bit microprocessor

Environmental Range -20 to 140°F (-29 to 60°C), 10–90% relative humidity, non-condensing. Should be mounted in a protective enclosure.

Physical Rugged aluminum cover, removable screw type terminal blocks

Memory 1 MB non-volatile battery-backed RAM, 1 MB flash memory, 16-bit memory bus

Battery 10-year Lithium CR2032 battery retains: time, control programs, editable properties, schedules and trends for a maximum of 10,000 hours

Real Time Clock Battery-backed real-time clock keeps track of time in the event of a power failure

Compliance

United States: FCC compliant to Title CFR47, Part 15, Subpart B, Class A. UL Listed, File E143900; CCN PAZX, UL916, Energy Management Equipment; AS/NZS: RCM Mark, IEC 61000-6-3; Canada: UL Listed File E143900, CCN PAZX7, CAN/CSA C22.2 No. 205 Signal Equip., Industry Canada Compliant, ICES-003, Class A; CE Mark Compliant with 2014/30/EU, and RoHS Com-pliant: 2015/863/EU; UKCA Mark compliant with Electromagnetic Compatibility Regulations 2016 – Gov.UK and RoHS for Electrical and Electronic Equipment 2012, REACH compliant.

Protection Built-in surge and transient protection for power and communications in compliance with EN-61000-6-1

BT485 Connector Attach a BT485 (not included) to a controller at the beginning and end of a network segment to add bias and to terminate a network segment

SPECIFICATIONS

Figure 1: Physical Dimensions

©2023 Carrier. All Rights Reserved. All trademarks and service marks referred herein are the property of their respective owners. 8-18-2023

in. cm

Width: 8.32 21.1

Height: 7.0 17.8

Depth: 1.5 3.8

Weight: 1.05 lbs 0.48 kg