4326-50A_Rev_4_M232_Unit.pdf

U.S. ARMY DEFENSE AMMUNITION CENTER

REV.

TESTED

ENGINEER

OR

TECHNICIAN

BASIC

ENGINEERING

DIVISON

TEST

ENGINEER

EXPLOSIVE

SAFETY

DIRECTORATE

CLASS DIVISION DRAWING FILE

APPROVED BY ORDER OF COMMANDING

GENERAL, U.S. ARMY MATERIEL COMMAND

APPROVED, U.S. ARMY RESEARCH, DEVELOPMENT

AND ENGINEERING COMMAND

U.S. ARMY MATERIEL COMMAND DRAWING

DO NOT SCALE

PROJECT CA 345/50A-00

NOTICE: THIS APPENDIX CANNOT STAND ALONE BUT MUST BE USED IN CONJUNCTION WITH THE BASIC UNITIZATION

PROCEDURES DRAWING 19-48-4326-20PM1012.

*SEE GENERAL NOTE "J" ON PAGE 3.

19 48

DISTRIBUTION STATEMENT A:

APPROVED FOR PUBLIC RELEASE

DISTRIBUTION IS UNLIMITED.

RDAR-EIL-TP

AMSJM-LIT

APPROVED, U.S. ARMY JOINT MUNITIONS COMMAND

PATRICK DOUGHERTY

20PM10124326/50A

CAUTION: VERIFY PRIOR TO USE AT HTTPS://MHP.REDSTONE.ARMY.MIL THAT THIS IS

THE MOST CURRENT VERSION OF THIS DOCUMENT. THIS IS PAGE 1 OF 6.

JUNE 2000

MADELINE BANKS FEBRUARY 2014REVISION NO. 4

SEE THE REVISION LISTING ON PAGE 2

APPENDIX 50A

UNITIZATION PROCEDURES FOR

AMMUNITION AND COMPONENTS

PACKED IN CYLINDRICAL METAL

OR PLASTIC CONTAINERS ON 4-

WAY ENTRY WOODEN PALLETS*

WITH METAL TOP LIFT

MODULAR ARTILLERY CHARGE SYSTEMS (MACS),

M232 OR M232A1, PACKED 5 PER PA103A2 CYLIN-

DRICAL METAL CONTAINER, UNITIZED 30 PER 38” X

46-1/2” PALLET*; APPROX CONTAINER SIZE 38” L X

7-1/2” W X 7-1/2” H

Test Rpt 09-10

REHMSTEDT.MA

RK.J.1230548400

Digitally signed by

REHMSTEDT.MARK.J.1230548400

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=REHMSTEDT.MARK.J.1230548400 Date: 2014.01.14 07:02:14 -06'00'

CASILLAS.GILBE

RT.J.1230393644

Digitally signed by

CASILLAS.GILBERT.J.1230393644

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=CASILLAS.GILBERT.J.1230393644 Date: 2014.01.22 09:58:50 -06'00'

FIEFFER.LAURA

.A.1230375727

Digitally signed by

FIEFFER.LAURA.A.1230375727

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=FIEFFER.LAURA.A.1230375727 Date: 2013.04.01 08:05:56 -05'00'

GORDON.WA

LTER.G.1239

583268

Digitally signed by

GORDON.WALTER.G.1239583268

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=GORDON.WALTER.G.1239583268 Date: 2013.04.01 07:56:12 -05'00'

SHIMP.UPTON

.R.1231257183

Digitally signed by

SHIMP.UPTON.R.1231257183

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=SHIMP.UPTON.R.1231257183 Date: 2014.02.24 08:39:33 -06'00'

WILLIAMS.KENY

ON.L.1231212392

Digitally signed by

WILLIAMS.KENYON.L.1231212392

DN: c=US, o=U.S. Government, ou=DoD, ou=PKI, ou=USA, cn=WILLIAMS.KENYON.L.1231212392 Date: 2013.04.29 12:51:50 -05'00'

PROJECT CA 345/50A-00 DRAWING 19-48-4326/50A

PALLET UNIT DATA

ITEMS INCLUDED

*HAZARD

CLASS

AND

DIVISION

*COMPATI-

BILITY

GROUP

APPROX

WEIGHT

(LBS)

NSN DODIC

1320- 01-457-4063 01-526-6523

DA13

DA13

1.3 1.3

C C

1,820 1,820

01-485-4370 DA24 -----INERT----- 1,820

*HAZARD CLASSIFICATION DATA CONTAINED IN THE ABOVE CHART IS FOR GUIDANCE AND INFORMATIONAL PUR-

POSES ONLY. VERIFICATION OF THE SPECIFIED DATA SHOULD BE MADE BY CONSULTING THE MOST RECENT

JOINT HAZARD CLASSIFICATION SYSTEM LISTING OR OTHER APPROVED LISTING(S).

REVISIONS

REVISION NO. 1, DATED MARCH 2001, CONSISTS OF:

1. REPLACING NSN AND DODIC.

2. CHANGING PALLET UNIT WEIGHT.

3. ADDING SPECIAL NOTE AND KEY LETTER “F” ON PAGE 5.

4. CHANGING DIMENSION OF DECK BOARD, KEY LETTER “G”.

5. REPLACING VIEW A-A.

REVISION NO. 2, DATED MAY 2003, CONSISTS OF:

1. REMOVING ONE LAYER FROM THE PALLET UNIT.

2. UPDATING GROSS WEIGHT AND HAZARD CLASS.

3. ADDING ITEM BY NATIONAL STOCK NUMBER TO THE “PALLET UNIT DATA” CHART.

4. CHANGING THE PALLET UNIT DATA TO REFLECT TOTAL CONTAINER AND WEIGHT CHANGE.

5. UPDATING GENERAL NOTE “H” AND SPECIAL NOTE TO INCLUDE PALLET HEAT TREATMENT RE-

QUIREMENTS.

REVISION NO. 3, DATED JANUARY 2006, CONSISTS OF:

UPDATING DRAWING DIMENSIONS

REVISION NO. 4, DATED FEBRUARY 2014, CONSISTS OF CHANGES PER ECP R11K3026 INCLUDING:

1. ADDING M232A1 CHARGE REFERENCE IN TITLE.

2. ADDING ITEM BY NATIONAL STOCK NUMBER TO THE “PALLET UNIT DATA” CHART.

3. UPDATING THE PALLET UNIT DATA TO REFLECT TOTAL CONTAINER AND WEIGHT CHANGE.

4. ADDING ADDITIONAL NAILING TO PALLET DUNNAGE LOCATION.

5. UPDATING CALLOUTS TO REFERENCE .029” STRAPPING THICKNESSES.

PROJECT CA 345/50A-00DRAWING 19-48-4326/50A

PALLET UNIT

SEE GENERAL NOTE "B" AT RIGHT.

30 CONTAINERS OF MACS (5 PER CNTR) @ 54.5 LBS - - - - - 1,635 LBS

DUNNAGE - - - - - - - - - - - - - - - - - - - - - - - - 110 LBS

PALLET - - - - - - - - - - - - - - - - - - - - - - - - 75 LBS

TOTAL WEIGHT - - - - - - - - - - - 1,820 LBS (APPROX)

CUBE - - - - - - - - - - - - - - - 44.6 CU FT (APPROX)

BILL OF MATERIAL

NAILS NO. REQD POUNDS

6d (2”) 48 0.28

SPECIAL PALLET, 38” X 46-1/2” - 1 REQD - 75 LBS

STEEL STRAPPING, 3/4” - 47.08’ REQD - 4.20 LBS

SEAL FOR 3/4” STRAPPING - - - 5 REQD - - - - NIL

STEEL STRAPPING, 1-1/4”- 45.75’ REQD - 6.54 LBS

SEAL FOR 1-1/4” STRAPPING - - 3 REQD - - - - NIL

STAPLE, 1-17/32” X 3/4” - - 12 REQD - - - - NIL

PLYWOOD, 3/8” - - 12.29 SQ FT REQD - 5.13 LBS

PLYWOOD, 3/4” - - - 3.17 SQ FT REQD - 6.53 LBS

METAL LIFTING FRAME - - - - - 1 REQD - - 80 LBS

GENERAL NOTES

A. THIS APPENDIX CANNOT STAND ALONE BUT MUST BE USED

IN CONJUNCTION WITH THE BASIC UNITIZATION PROCE-

DURES DRAWING 19-48-4326-20PM1012. TO PRODUCE AN

APPROVED UNIT LOAD, ALL PERTINENT PROCEDURES,

SPECIFICATIONS AND CRITERIA SET FORTH WITHIN THE

BASIC DRAWING WILL APPLY TO THE PROCEDURES DELIN-

EATED IN THIS APPENDIX. ANY EXCEPTIONS TO THE BASIC

PROCEDURES ARE SPECIFIED IN THIS APPENDIX.

B. DIMENSIONS, CUBE AND WEIGHT OF A PALLET UNIT WILL

VARY SLIGHTLY DEPENDING UPON THE ACTUAL DIMEN-

SIONS OF THE BOXES AND THE WEIGHT OF THE SPECIFIC

ITEM BEING UNITIZED.

C. BUNDLING AND STABILIZING STRAPS MUST BE TENSIONED

AND SEALED PRIOR TO THE APPLICATION OF THE TIEDOWN

STRAPS. TWO BUNDLING STRAPS MUST SURROUND ALL

CONTAINERS IN THE SECOND AND THIRD LAYERS AND TWO

BUNDLING STRAPS MUST SURROUND ALL CONTAINERS IN

THE THIRD AND FOURTH LAYERS. BUNDLING STRAPS

SHALL BE APPLIED AS CLOSE TO THE OUTER CONTAINER

RINGS AS POSSIBLE. STABILIZING STRAP MUST SURROUND

ALL CONTAINERS IN LAYERS ONE AND TWO WITH THE

STRAP LOCATED AS CLOSE TO THE CENTER RING AS POS-

SIBLE. CAUTION: STRAPS MUST NOT BE ALLOWED TO

OVERLAP.

D. ALTHOUGH THE CONTAINER DEPICTED IN THE UNIT LOAD

AT LEFT ARE CONSTRUCTED WITH INTERLOCKING DEVICES,

THE INTERLOCKS WILL NOT FUNCTION PROPERLY UNLESS

THE CONTAINERS ARE POSITIONED SO THAT THE “PINS” OF

THE INTERLOCKS ARE FACING UPWARD. THIS ORIENTA-

TION WILL AID IN THE PREVENTION OF CONTAINER MOVE-

MENT, BOTH LATERALLY AND LONGITUDINALLY, DURING

SHIPMENT OF THE UNIT LOAD.

E. THE FOLLOWING AMC DRAWINGS ARE APPLICABLE FOR

OUTLOADING AND STORAGE OF THE ITEMS COVERED BY

THIS APPENDIX.

CARLOADING - - - - 19-48-4330/50A-5PM1007

TRUCKLOADING - - - 19-48-4331/50A-11PM1007

STORAGE - - - - - 19-48-4335/50A-1-3-4-14-

22PM1007

END OPENING ISO

CONTAINER - - - - 19-48-4333/50A-15PM1024

MILVAN - - - - - - 19-48-4332/50A-15PM1023

SIDE OPENING ISO

CONTAINER - - - - 19-48-4334/50A-15PM1025

F. IF ITEMS COVERED HEREIN ARE UNITIZED PRIOR TO ISSU-

ANCE OF THIS REVISION TO THIS APPENDIX, THE CONTAIN-

ERS NEED NOT BE REUNITIZED SOLELY TO CONFORM TO

THIS REVISION.

G. THE UNITIZATION PROCEDURES DEPICTED HEREIN MAY

ALSO BE USED FOR UNITIZING MODULAR ARTILLERY

CHARGE SYSTEM (MACS) WHEN IDENTIFIED BY DIFFERENT

NATIONAL STOCK NUMBERS (NSN) THAN WHAT IS SHOWN

ON PAGE 2, PROVIDED THE CONTAINER PACK DOES NOT

VARY FROM WHAT IS DELINEATED HEREIN. THE EXPLOSIVE

CLASSIFICATION OF OTHER ITEMS MAY BE DIFFERENT

THAN WHAT IS SHOWN.

H. DIMENSIONS GIVEN FOR DUNNAGE PIECES WILL BE FIELD

CHECKED PRIOR TO THEIR ASSEMBLY TO THE PALLET UNIT.

CONTAINERS MUST FIT SNUGLY IN THE DUNNAGE ASSEM-

BLIES. ALSO, DUE TO THE VARIATION OF CONTAINER DI-

MENSIONS, ADJUSTMENTS MAY BE REQUIRED AS TO THE

LOCATION OF CERTAIN PIECES OF DUNNAGE IN A DUNNAGE

ASSEMBLY.

J. THE SPECIAL PALLET WILL BE CONSTRUCTED AND ASSEM-

BLED IN ACCORDANCE WITH MILITARY SPECIFICATION MIL-

DTL-15011, STYLE 1A, TYPE 1, CLASS 1, PRESERVATIVE

TREATED AND HEAT TREATED PALLET AND THE INSTRUC-

TIONS PROVIDED ON PAGES 5 AND 6.

K. THE THICKNESS OF THE PLYWOOD BUFFER PIECES DE-

PICTED IN THE BUFFER ASSEMBLY ON PAGE 4 MUST BE AD-

JUSTED AS REQUIRED TO COMPLY WITH THE DIMENSIONAL

VARIANCE OF THE PA103A2 CONTAINERS, SO AS TO COM-

PLETELY FILL OUT THE PALLET. NOTE: NOMINAL 1” X 6”

MATERIAL MAY BE SUBSTITUTED FOR THE 3/4” THICK PLY-

WOOD IF IT WILL CAUSE THE PALLET UNIT DIMENSIONS TO

BE EQUAL TO OR GREATER THAN 46-1/2”.

L. FOR DETAILS OF THE METAL LIFTING FRAME, SEE DAC

DRAWING NO. ACV00068 AND MILITARY SPECIFICATION MIL-

A-70788.

M. ALL DUNNAGE SHALL BE PRESERVATIVE TREATED IN AC-

CORDANCE WITH GENERAL NOTE “X” IN THE BASIC PROCE-

DURE.

(CONTINUED ON PAGE 4)

46 1/2" 38"

43 5/8"

TOP LIFTING RINGS

NOT AUTHORIZED

FOR NAVY USE.

METAL LIFTING

FRAME (1 REQD).

SEE GENERAL NOTE

"L" AT RIGHT.

38" X 46-1/2" SPECIAL

PALLET. SEE GENERAL

NOTE "J" AT RIGHT.

SEAL FOR 3/4" STRAPPING

(5 REQD, 1 PER STRAP).

CRIMP EACH SEAL WITH

TWO PAIR OF NOTCHES.

BUNDLING STRAP, 3/4" X .035" OR

.031" OR .029" X 9'-5" LONG STEEL

STRAPPING (4 REQD). SEE GENERAL

NOTE "C" AT RIGHT.

INDICATES PA103A2 SERIES

CONTAINER. BELL END OF

CONTAINER ORIENTED ON

THIS SIDE OF PALLET.

BUFFER ASSEMBLY

(2 REQD). SEE THE

DETAIL ON PAGE 4

AND GENERAL NOTE

"K" AT RIGHT.

PALLET DUNNAGE.

SEE THE DETAIL

ON PAGE 4.

STAPLE, 1-17/32"

WIDTH BY 3/4"

LEG LENGTH

(12 REQD, 4 PER

TIEDOWN STRAP).

SEAL FOR 1-1/4" STRAPPING

(3 REQD, 1 PER STRAP).

CRIMP EACH SEAL WITH

TWO PAIR OF NOTCHES.

TIEDOWN STRAP, 1-1/4" X .035" OR .031" OR .029"

X 15'-3" LONG STEEL STRAPPING (3 REQD).

TIEDOWN STRAPS WILL BE INSTALLED THROUGH

THE PALLET STRAP SLOTS. STAPLE STRAP TO

BUFFER ASSEMBLIES WITH TWO STAPLES

ON EACH ASSEMBLY.

STABILIZING STRAP, 3/4" X .035"

OR .031" OR .029" X 9'-5" LONG

STEEL STRAPPING (1 REQD).

SEE GENERAL NOTE "C" AT RIGHT.

BUFFER ASSEMBLY

A LEFT HAND PIECE IS DEPICTED. A

RIGHT HAND PIECE IS ALSO REQUIRED.

SEE GENERAL NOTE "K" ON PAGE 3

BUFFER DUNNAGE, PLYWOOD,

3/8" X 6" X15" (1 REQD). NAIL

THROUGH THE BUFFER PIECES

W/4-6d NAILS AND CLINCH.

INDICATES PLYWOOD

PALLET DUNNAGE

BUFFER PIECE, PLYWOOD

3/4" X 6" X 38" (1 REQD).

(GENERAL NOTES CONTINUED FROM PAGE 3)

N. CONVERSION TO METRIC EQUIVALENTS: DIMENSIONS WITHIN THIS DOCUMENT

ARE EXPRESSED IN INCHES, AND WEIGHTS ARE EXPRESSED IN POUNDS.

WHEN NECESSARY, THE METRIC EQUIVALENTS MAY BE COMPUTED ON THE

BASIS OF ONE INCH EQUALS 25.4MM AND ONE POUND EQUALS 0.454 KG.

O. EMPTY OR REJECT PA103A2 CONTAINERS WILL BE USED AS FILLER CONTAINERS

AS NECESSARY. FILLER CONTAINERS MUST BE INSTALLED IN THE MIDDLE OF

THE TOP LAYER(S) OF CONTAINERS. IF SIX FULL CONTAINERS ARE TO BE OMIT-

TED, ONE FULL LAYER OF CONTAINERS WILL BE OMITTED. WHEN (EMPTY) FILL-

ER CONTAINERS ARE USED IN PLACE OF OMITTED CONTAINERS TO COMPLETELY

FILL OUT A LAYER ON A PALLET, THEY WILL BE MARKED AS SPECIFIED IN ARDEC

DRAWING NO. 12982865.

P. WHEN ONE OR MORE LAYERS ARE OMITTED, THE BUNDLING STRAP REQUIRE-

MENT WILL CHANGE. A FOUR LAYER UNIT WILL OMIT THE TWO BUNDLING

STRAPS THAT SURROUND THE THIRD AND FOURTH LAYERS. THE REMAINING

BUNDLING STRAPS WILL SURROUND THE SECOND AND THIRD LAYERS. A UNIT

WITH THREE OR LESS LAYERS DOES NOT REQUIRE BUNDLING STRAPS.

Q. FOR DETAILS OF THE PA103A2 SERIES CONTAINER SEE ARDEC DRAWING NO.

12961080.

BUFFER DUNNAGE, PLYWOOD,

3/8" X 6" X15-1/4" (1 REQD). NAIL

THROUGH THE BUFFER PIECES

W/4-6d NAILS AND CLINCH.

INDICATES PA103A2

SERIES CONTAINER

INDICATES BUFFER

ASSEMBLY

INDICATES SPECIAL

PALLET

DECK DUNNAGE, PLYWOOD, 3/8" X 15

X 46-1/2" (1 REQD). NAIL AT OUTER

EDGES THROUGH DUNNAGE, DECK

BOARDS AND STRINGERS, WHERE

APPLICABLE W/8-6d NAILS AND CLINCH.

SEE ALSO SPECIAL NAILING BELOW.

SPECIAL 38" X 46-1/2"

PALLET. SEE GENERAL

NOTE "J" ON PAGE 3.

BELL END OF CON-

TAINER ORIENTED ON

THIS SIDE OF PALLET.

PARTIAL VIEW

PALLET DUNNAGE LOCATION

NOTE: CARE MUST BE TAKEN WHEN APPLYING PALLET

DUNNAGE, AVOID NAILING THRU STRAP SLOTS, SPLITTING

PALLET DECK OR STRINGER BOARDS WITH DECK DUNNAGE

NAILS, OR APPLYING NAILS ON TOP OF EXISTING PALLET NAILS.

3" 20 1/4"

DECK DUNNAGE, PLYWOOD,

3/8" X 15-1/4" X 46-1/2" (1 REQD).

NAIL THROUGH DECK BOARDS

W/20-6d NAILS AND CLINCH.

3"

20 1/4"

PA

46 1/2"

38"

SPECIAL NAILING, NAIL

THROUGH DECK DUNNAGE,

DECK BOARDS, AND STRINGERS

W/6-7d NAILS AT EACH OF THE

FOUR LOCATIONS.

2 1/4" 2 5/8"

3/4"1"

1"

PROJECT CA 345/50A-00DRAWING 19-48-4326/50A

SPECIAL NOTE:

THE SPECIAL PALLET DEPICTED ABOVE WILL BE CONSTRUCTED AND AS-

SEMBLED IN ACCORDANCE WITH A MILITARY SPECIFICATION MIL-P-15011,

STYLE 1A, TYPE I, CLASS 1, PRESERVATIVE TREATED AND HEAT TREATED

PALLET, EXCEPT FOR THE DIMENSION VARIANCES AND COMPONENT QUAN-

TITIES SHOWN IN THE KEY LETTERS AND DETAIL BELOW. REFER TO MILI-

TARY SPECIFICATION MIL-DTL-15011 FOR DETAILS AS TO MATERIAL SPECIFI-

CATIONS, PRESERVATIVE TREATMENT, HEAT TREATMENT, TOLERANCES, IN-

SPECTION CRITERIA, ETC. NOTE THAT CHAMFERS ARE NOT REQUIRED FOR

THE PALLET DEPICTED HEREIN. NOTE: AVOID NAILING THROUGH STRAP

SLOTS.

KEY LETTERS

○A POST, 3-5/8” + 1/8” X 5-1/2” + 1/8” X 2-3/4” + 1/8” HIGH (6 REQD)..

○B POST, CENTER, 3-5/8” + 1/8” X 7-1/2” + 1/8” X 2-3/4” + 1/8” HIGH (3 REQD).

○C OUTER STRINGER, 13/16” + 1/16” X 7-1/4” ± 1/8” X 46-1/2” ± 1/8” (2 REQD).

○D INNER STRINGER, 13/16” + 1/16” X 3-5/8” + 1/8” X 46-1/2” ± 1/8” (1 REQD).

○E TOP DECK BOARD, OUTER, 13/16” + 1/16” X 5-1/2” ± 1/8” X 46-1/2” ± 1/8” (2

REQD). NAIL DECK BOARDS TO THE STRINGERS W/3 NAILS (1.5” LONG X

0.120” DIAMETER) AT EACH LOCATION. NAIL THRU THE STRINGERS INTO

THE POSTS W/3 NAILS (3.25” LONG X 0.135” DIAMETER) AT EACH LOCATION.

○F TOP DECK BOARD, INNER, 13/16” + 1/16” X 7-1/2” ± 1/8” X 46-1/2” ± 1/8” (2

REQD). NAIL DECK BOARDS TO THE STRINGERS W/4 NAILS (1.5” LONG X

0.120” DIAMETER) AT EACH LOCATION. NOTE: AVOID NAILING THRU STRAP

SLOTS.

○G TOP DECK BOARD, CENTER, 13/16” + 1/16” X 7-1/2” ± 1/8” X 46-1/2” ± 1/8” (1

REQD). NAIL DECK BOARD TO THE STRINGERS W/4 NAILS (1.5” LONG X 0.120”

DIAMETER) AT EACH LOCATION. NAIL THRU THE STRINGERS INTO THE

POSTS W/4 NAILS (3.25” LONG X 0.135” DIAMETER) AT EACH LOCATION.

NOTE: AVOID NAILING THRU STRAP SLOTS.

○H BOTTOM DECK BOARD, OUTER, 13/16” + 1/16” X 5-1/2” ± 1/8” X 46-1/2” ± 1/8” (2

REQD). NAIL TO THE POSTS W/3 NAILS (2.25” LONG X 0.120” DIAMETER) AT

EACH JOINT.

○J BOTTOM DECK BOARD, CENTER, 13/16” + 1/16” X 7-1/2” ± 1/8” X 46-1/2” ± 1/8” (1

REQD). NAIL TO THE POSTS W/4 NAILS (2.25” LONG X 0.120” DIAMETER) AT

EACH JOINT.

F

G

C

D

A

E

B

J

H

SEE MIL-P-15011 PARAGRAPH 3.4.1

PA

46 1/2" ±1/4

38" ±1/4

3/4" MIN

1-3/16" MAX

5 1/2" (APPROX)

21 3/8"

SEE "PALLET END DETAIL"

AND "STRAP SLOT DETAIL"

ON PAGE 6.

STRAP SLOT DETAIL

SHOWING STRAP SLOT DIMENSIONS

(TYPICAL, 3 PLACES). SEE LOCATION

IN "END VIEW DETAIL" BELOW.

END VIEW DETAIL

(KEY LETTERS REFER TO KEY LETTERS

ON PAGE 5.)

CL CL CL

DECKBOARD, 13/16" +1/16"

1 3/8" + 1/8"

3/16" + 1/16"

1 15/16"3 3/4" u 1/16"1 15/16"

38" ±1/4

SPECIAL PALLET

38" X 46-1/2"

STRAP SLOT

FGF