MP RFI 24RMP01 Amend 01 Compliance Matrix Objectives 02032025.xlsx

XLSX spreadsheet 327 KB Posted Mar 13, 2025

Attached to: Manpack Radio Production, Engineering and Sustainment Follow-On Procurement - Request for Information
Solicitation number: W15P7T-24-R-MP01
Issued by: Department of the Army Materiel Command Army Contracting Command Aberdeen Proving Ground

About this file

Written by GovTribe AI · Mar 13, 2025

This file is a Draft Manpack Radio Performance Requirements Document (PRD) detailing comprehensive technical specifications for a multi-channel, multi-waveform tactical radio system for the U.S. Army. The PRD outlines extensive requirements for a software-defined radio capable of operating across multiple frequency bands and communication modes, including SINCGARS, MUOS, WREN, UHF SATCOM, and other tactical waveforms, with robust environmental, electromagnetic, and security specifications. Key requirements include two independent channels supporting simultaneous voice and data communications, NSA Type 1 encryption, ability to operate in dismounted and mounted configurations, compatibility with various vehicle mounts, and performance across extreme environmental conditions from -40°C to +55°C.

The document specifies detailed technical parameters including radio weight (maximum 16 pounds for dismounted configuration), battery life (8-24 hours), transmission ranges (3-40 km depending on configuration), and extensive compatibility with military communication systems and platforms. The PRD supports the Army's Integrated Tactical Network modernization efforts, with manufacturing goals of up to 500 units monthly and a desire for minimal maintenance requirements. The radio must be certified for high-assurance communications at the SECRET level, with contractors required to establish technical data escrow accounts to support long-term sustainment. The current incumbent contractors are L3Harris and Rockwell-Collins, with a follow-on procurement planned for award around September 2026.

View the file

Other files

File	Type	Posted
MP RFI 24RMP01 Amend 01 03132025.docx	DOCX document	Mar 13, 2025
MP RFI 24RMP01 Amend 01 Attach 2 Special Depot Maint and Repair Transition Reqts.docx	DOCX document	Mar 13, 2025
MP RFI 24RMP01 Amend 1 PRD_v8.0_20250312.pdf	PDF	Mar 13, 2025
MP RFI 24RMP01 Amend 01 Attach 1 Special Reqts Escrow Account Data Pkg.docx	DOCX document	Mar 13, 2025
MP Compliance Matrix_PRD v6.0.xlsx	XLSX spreadsheet	Jun 13, 2024
MP PRD_v6.0_20231128_DRAFT.docx	DOCX document	Jun 13, 2024
Manpack Recompete RFI 1_Question__Comment_Matrix.xlsx	XLSX spreadsheet	Jun 13, 2024

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Objectives

PRD Requirements								Objectives	Total Objectives:	327
PRD Reference	Subsection	Specification Section	Req	1. Compliant Upon Contract Award? Y/N	2a. Able to Fix Price at Time of award? Y/N	2b. Deliver within 3 years from Time of Award? Y/N	Comments	Index
This document contains Controlled Unclassified Information (CUI) when filled in.		CONTROLLED BY: USAASC

CONTROLLED BY: PEO C3T PM TR PdM HMS CUI CATEGORY: CTI, EXPORT CONTROL (when filled in)

LIMITED DISSEMINATION CONTROL: FEDCOM, NOFORN

DISTRIBUTION: D (when filled in) POC: Blaise Sceski: (443) 395-2939

3		Manpack Radio Set Requirements
3		The following requirements, except where specified, apply to mounted, dismounted, and TOC configurations of the MP Radio Set for the Universal Variant. Applicability of these requirements to the Lite Variant are provided in Appendix A.
3.1		MP Radio Set Characteristics
3.1.1		Channels and Configurations
3.1.1.1		The MP Radio Set shall consist of one MP Radio with Ancillaries as required to meet threshold requirements in Paragraphs 3 through 9.	(t)
3.1.1.2		The MP Radio Set shall operate two independent channels simultaneously.	(t)
3.1.1.3		The MP Radio Set shall support operations in a Dismounted configuration.	(t)
3.1.1.4		The MP Radio Set shall support operations in a Mounted configuration.	(t)
3.1.1.5		The MP Radio Set shall support operations in a TOC configuration.	(t)
3.1.2		Mission Weight and Battery Life
3.1.2.1		The MP Radio Set Dismounted configuration mission weight shall be no more than 16.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 8 hours under battery power with the following maximum receive/transmit loading conditions of:	(t)
3.1.2.1	a)	WREN TSM: 30-second PLI rate and 10% Push-to-Talk (PTT) Voice Transmit duty cycle in a 18 node net with 2 talk groups,	(t)
3.1.2.1	b)	SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(t)
3.1.2.1	c)	Sufficient transmit power on both channels simultaneously to achieve required ranges.	(t)
3.1.2.2		The MP Radio Set Dismounted configuration mission weight shall be no more than 15.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 8 hours under battery power with the following maximum receive/transmit loading conditions of:	(o)		1
3.1.2.2	a)	WREN TSM: 30-second PLI rate and 10% PTT Voice Transmit duty cycle in a 18 node net with 2 talk groups,	(o)		2
3.1.2.2	b)	SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		3
3.1.2.2	c)	Sufficient transmit power on both channels simultaneously to achieve required ranges.	(o)		4
3.1.2.3		The MP Radio Set Dismounted configuration mission weight shall be no more than 9.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 8 hours under battery power with the following maximum receive/transmit loading conditions of:	(o)		5
3.1.2.3	a)	WREN TSM: 30-second PLI rate and 10% PTT Voice Transmit duty cycle in a 18 node net with 2 talk groups,	(o)		6
3.1.2.3	b)	SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		7
3.1.2.3	c)	Sufficient transmit power on both channels simultaneously to achieve required ranges.	(o)		8
3.1.2.4		The MP Radio Set Dismounted configuration mission weight shall be no more than 16.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 24 hours under battery power with the following maximum receive/transmit loading conditions of:	(o)		9
3.1.2.4	a)	WREN TSM: 30-second PLI rate and 10% PTT Voice Transmit duty cycle in a 18 node net with 2 talk groups,	(o)		10
3.1.2.4	b)	SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		11
3.1.2.4	c)	Sufficient transmit power on both channels simultaneously to achieve required ranges.	(o)		12
3.1.2.5		The MP Radio Set measured mission weight shall increase by no more than 3.5 lbs per channel when operating MUOS and Ultra-High Frequency Satellite Communications (UHF SATCOM) using Dismounted Satellite Communications At-the-Pause Antennas IAW paragraph 5.1.3.1.	(t)
3.1.2.6		The MP Radio Set measured mission weight shall increase by no more than 1.0 lbs per channel when operating MUOS using Dismounted MUOS On-the-Move Antennas IAW paragraph 5.1.3.2.	(t)
3.1.2.7		Reserved
3.1.2.8		The MP Radio Set Dismounted configuration mission weight shall be no more than 16.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 12 hours under battery power with the following maximum receive/transmit loading conditions of:	(o)		13
3.1.2.8	a)	WREN TSM: 30-second PLI rate and 10% PTT Voice Transmit duty cycle in a 18 node net with 2 talk groups,	(o)		14
3.1.2.8	b)	SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		15
3.1.2.8	c)	Sufficient transmit power on both channels simultaneously to achieve required ranges.	(o)		16
3.1.2.9		The MP Radio Set Dismounted configuration mission weight shall be no more than 16.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 16 hours under battery power with the following maximum receive/transmit loading conditions of:	(o)		17
3.1.2.9	a)	WREN TSM: 30-second PLI rate and 10% PTT Voice Transmit duty cycle in a 18 node net with 2 talk groups,	(o)		18
3.1.2.9	b)	SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		19
3.1.2.9	c)	Sufficient transmit power on both channels simultaneously to achieve required ranges.	(o)		20
3.1.2.10		The MP Radio Set Dismounted configuration mission weight shall be no more than 16.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 20 hours under battery power with the following maximum receive/transmit loading conditions of:	(o)		21
3.1.2.10	a)	WREN TSM: 30-second PLI rate and 10% PTT Voice Transmit duty cycle in a 18 node net with 2 talk groups,	(o)		22
3.1.2.10	b)	SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		23
3.1.2.10	c)	Sufficient transmit power on both channels simultaneously to achieve required ranges.	(o)		24
3.1.2.11		The MP Radio Set Dismounted configuration shall operate the waveform combination MUOS/SINCGARS in a 4 node net, for 8 hours under battery power with the following maximum receive/transmit loading conditions of:	(o)		25
3.1.2.11	a)	MUOS Group: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		26
3.1.2.11	b)	SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		27
3.1.2.11	c)	Sufficient transmit power on both channels simultaneously to achieve required ranges.	(o)		28
3.1.2.12		The MP Radio Set Dismounted configuration shall operate the waveform combination MUOS/SINCGARS in a 4 node net, for 12 hours under battery power with the following maximum receive/transmit loading conditions of:	(o)		29
3.1.2.12	a)	MUOS Group: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		30
3.1.2.12	b)	SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		31
3.1.2.12	c)	Sufficient transmit power on both channels simultaneously to achieve required ranges.	(o)		32
3.1.2.13		The MP Radio Set Dismounted configuration shall operate the waveform combination MUOS/SINCGARS in a 4 node net, for 16 hours under battery power with the following maximum receive/transmit loading conditions of:	(o)		33
3.1.2.13	a)	MUOS Group: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		34
3.1.2.13	b)	SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		35
3.1.2.13	c)	Sufficient transmit power on both channels simultaneously to achieve required ranges.	(o)		36
3.1.3		Power
3.1.3.1		The MP Radio Set shall operate using rechargeable batteries, non-rechargeable batteries, and AC Adapter power sources IAW Paragraph 5.3.	(t)
3.1.3.2		The MP Radio Set, when in mounted configuration, shall have the ability to operate using vehicle prime power (IAW MIL-STD-1275E, Paragraphs 5.1.1.1 steady state over the voltage range 20-33 VDC).	(t)
3.1.3.3		The MP Radio Set, when in a mounted configuration, shall operate through cranking voltages as specified in MIL-STD-1275E, during which time the unit may stop transmitting and receiving but will not be damaged or lose any presets.	(t)
3.1.3.4		The MP Radio Set shall provide capability to prevent radio damage caused by battery reverse polarity.	(t)
3.1.3.5		The MP Radio Set shall monitor remaining battery power and provide the status information to the operator on the HMI when operating with smart batteries (e.g., compliant with Smart Battery Data Specification, Rev 1.1.)	(t)
3.1.3.6		The MP Radio Set shall provide capability to use standard army non-rechargeable and rechargeable -90 series batteries.	(t)
3.1.3.7		The peak power consumption of two MP Radio Sets, when installed in a dual vehicle mount, including the mount, but excluding any External High Power Amplifiers, shall not exceed 600W.	(t)
3.1.3.8		The peak power consumption of two MP Radio Sets, when installed in a dual vehicle mount, including the mount, but excluding any External High Power Amplifiers, shall not exceed 500W.	(o)		37
3.1.3.9		The peak power consumption of a MP Radio Set, when installed in a Single vehicle mount, including the mount, but excluding any External High Power Amplifiers, shall not exceed 300W.	(t)
3.1.3.10		The peak power consumption of a MP Radio Set, when installed in a Single vehicle mount, including the mount, but excluding any External High Power Amplifiers, shall not exceed 250W.	(o)		38
3.1.3.11		The MP Radio Set shall provide for the capability to replace prime power batteries without the use of tools.	(t)
3.1.3.12		The MP Radio Set shall provide for the capability to replace all batteries without the use of tools.	(o)		39
3.1.3.13		The MP Radio Set shall provide circuitry to prevent damage from over-voltage, over-current, and over-temperature conditions.	(t)
3.1.3.14		The MP Radio Set, when in mounted configuration, shall have the ability to operate using vehicle prime power (IAW MIL-STD-1275F, Paragraphs 5.1.1.1 steady state over the voltage range 20-33 VDC).	(o)		40
3.1.3.15		The MP Radio Set, when in a mounted configuration, shall operate through cranking voltages as specified in MIL-STD-1275F, during which time the unit may stop transmitting and receiving but will not be damaged or lose any presets.	(o)		41
3.1.4		Connectors and Interfaces
3.1.4.1		The MP Radio Set shall provide connectors compatible with the U-283/U, 6 pin for each channel of audio and the key fill connector.	(t)
3.1.4.2		The MP Radio Set shall provide legacy serial data interface IAW MIL-STD-188-114A as shown Paragraph 8.3 for compatibility with Fires support systems.	(t)
3.1.4.3		The MP Radio Set shall provide electrical interface for headsets, speaker/microphone, and handset IAW MIL-DTL-55116C.	(t)
3.1.4.4		The MP Radio Set shall provide one data interface per channel and a single interface for radio control compatible with Ethernet over Universal Serial Bus (USB) 2.0 or higher compatible with Android.	(t)
3.1.4.5		The MP Radio Set shall provide Electronic Industries Association EIA-232 interface.	(t)
3.1.4.6		The MP Radio Set shall provide interface for 10/100 Mbps, auto-negotiated Ethernet per channel.	(t)
3.1.4.7		The MP Radio Set shall provide interface for 10/100/1000 Mbps, auto-negotiated Ethernet per channel.	(o)		42
3.1.4.8		The MP Radio Set shall provide interface for auto-MDI-X Ethernet per channel.	(o)		43
3.1.4.9		The MP Radio Set shall provide Type N Female RF interfaces for all dismounted antennas specified in Paragraphs 5.1.1 and 5.1.3, either directly or by use of adapters.	(t)
3.1.4.10		The MP Radio Set shall provide Type N Female RF interfaces for all mounted antennas specified in Paragraphs 5.1.2 and 5.1.4, either directly or by use of adapters.	(t)
3.1.4.11		The MP Radio Set shall provide Type TNC Female RF interfaces for GPS antenna specified in Paragraph 5.1.5 for all mounted configurations, either directly or by use of adapters.	(t)
3.1.4.12		The MP Radio Set shall provide an Ethernet and IP over USB interface for SNMPv3 monitoring and control.	(t)
3.1.4.13		The MP Radio Set shall sustain no damage when any Radio Frequency (RF) output port is open or shorted.	(t)
3.1.4.14		The MP Radio Set shall be compliant with Internet Protocol Version 4 (IPv4).	(t)
3.1.4.15		The MP Radio Set shall be compliant with Internet Protocol Version 6 (IPv6).	(o)		44
3.1.5		Victory In-Vehicle Network (IVN)
3.1.5.1		The MP Radio Set, when in a vehicle-mounted configuration, shall provide an interface to an Ethernet-based IVN as specified in section 8.5.1.1 of the VICTORY 1.9 specification.	(td)
3.1.5.2		The MP Radio Set, when in a vehicle-mounted configuration, shall provide a Precision Time Protocol (PTP) client to receive time information via PTPv2 as specified in section 7.1.1.1.2 of the VICTORY 1.9 specification.	(td)
3.1.5.3		The MP Radio Set, when in a vehicle-mounted configuration, shall subscribe to and receive multicast position information from the data interface of a position service as specified in section 7.1.2.1 of the VICTORY 1.9 specification.	(td)
3.1.5.4		Reserved
3.1.6		Waveform and Preset Storage
3.1.6.1		The MP Radio Set shall store all operational parameters required by all waveforms for at least 9 months after loss of primary or main battery power source.	(t)
3.1.6.2		The MP Radio Set shall have the storage capacity to store at least 100 presets, with a minimum of 50 presets per channel.	(t)
3.1.7		Waveform Network Management and Planning
3.1.7.1		The MP Radio Set shall be fully configurable using a J-TNT or Ruggedized Application Platform-Tactical Radio (RAP-TR) laptop.	(t)
3.1.7.2		Reserved
3.1.7.3		Reserved
3.1.7.4		The MP Radio Set shall support loading of all software and mission parameters using J-TNT or RAP-TR laptop.	(t)
3.1.7.5		Reserved
3.1.7.6		The MP Radio Set shall provide the ability for software and mission data to be loaded via USB mass storage device drag and drop method.	(t)
3.1.7.7		The MP Radio Set shall be able to be monitored and controlled via SNMPv3.	(t)
3.1.7.8		The MP Radio Set core SNMP monitoring and control functionality shall include the minimum capabilities as described in Paragraph 9.	(t)
3.1.7.9		The MP Radio Set shall implement the Program Manager for Tactical Radios (PM TR) Common Management Information Base (MIB) Version 2.0.4 for all channels and/or control of the radio. (Note: The PM TR Common MIB Version 2.0.4 specification is available in the PM TR Configuration Control Repository (PM TR CCR)).	(o)		45
3.1.7.10		The MP Radio Set shall be able to be fully configured with key material and mission preset information via the AN/PYQ-10 Simple Key Loader (SKL).	(t)
3.1.7.11		The MP Radio Set shall support fill of SINCGARS loadsets using the SKL.	(t)
3.1.7.12		The MP Radio Set shall allow user to operate multiple hopsets from a single SINCGARS loadset.	(t)
3.1.7.13		The MP Radio Set shall be capable of using the Next Generation Simple Key Loader (SKL) to load COMSEC and presets for all capable waveforms.	(o)		46
3.1.7.14		The MP Radio Set shall support Over the Air transmission and reception of new mission presets IAW the JTNC IR OTAM Application Note Unit Task Re-organization (UTR) Enhancement Enterprise OTAM 1.2 dated September 2017, or later (superseded by paragraph 3.1.7.17).	(t)
3.1.7.15		The MP Radio Set shall be configurable with the WREN defined network management and planning capability for configuring, loading, controlling, and monitoring of the radio for TSM operation, using the TrellisWare TSM Application Programming Interface (API).	(t)
3.1.7.16		The MP Radio Set shall be interoperable with Army network management tools and shall support the network manager capabilities to plan, implement, manage, control, identify, monitor, and configure radio user access and profile parameters of the network to include, but not limited to; voice call groups participation and physical network presets.	(t)
3.1.7.17		The MP Radio Set shall support Over the Air transmission and reception of new mission presets IAW the JTNC IR Over-the-Air Server Service (OSS) Application Note for the eOTAM 2.0, or later (supersedes paragraph 3.1.7.14).	(t)
3.1.7.18		The MP Radio Set shall support Mode 2/3 fill of SINCGARS IAW Drawing A3191133 Revision A, Specification - Interface for Mode 2 and Mode 3 Fill.	(o)		47
3.1.7.19		The MP Radio Set shall implement the PM TR Universal Radio API Version 2.0.0 to provision, configure, and monitor the radio in a way common to other radios in the PM TR portfolio.	(o)		48
3.1.7.20		The MP Radio Set shall support Over the Air transmission and reception of new mission presets IAW the JTNC IR Over-the-Air Server Service (OSS) Application Note for the eOTAM 2.2, or later (supersedes paragraph 3.1.7.17).	(o)
3.1.8		Cold and Warm Start
3.1.8.1		Reserved
3.1.8.2		Reserved
3.1.8.3		The MP Radio Set, when operating WREN and SINCGARS, shall allow operators to load mission data and crypto keys, and place both channels of the radio into operation (enter into network(s)) within 11 minutes, from powering on a zeroized radio, without requiring maintenance personnel.	(t)
3.1.8.4		The MP Radio Set, when operating WREN and SINCGARS, shall allow operators to place both radio channels into operation (enter into network(s)) within 5 minutes or less from power on assuming mission data and crypto keys have been previously loaded, without requiring maintenance personnel.	(t)
3.1.8.5		The MP Radio Set, when operating any waveform, shall allow operators to place both radio channels into operation from power on using mission data and crypto keys which have been previously loaded, without requiring maintenance personnel.	(t)
3.1.8.6		The MP Radio Set, when operating any combination of waveforms, shall allow operators to load mission data and crypto keys, and place both channels of the radio into operation (enter into network(s)) within 11 minutes, from powering on a zeroized radio, without requiring maintenance personnel.	(o)		50
3.1.8.7		The MP Radio Set, when operating any combination of waveforms, shall allow operators to place both radio channels into operation (enter into network(s)) within 5 minutes or less from power on assuming mission data and crypto keys have been previously loaded, without requiring maintenance personnel.	(o)		51
3.1.9		Self Test and Status
3.1.9.1		The MP Radio shall perform Power On Self-Test (POST) to determine operational status.	(t)
3.1.9.2		The MP Radio shall be capable of performing Continuous and User Initiated Built-In-Test (BIT) to detect and locate faults.	(t)
3.1.9.3		The MP Radio shall be capable of detecting at least 95% of all faults.	(t)
3.1.9.4		The MP Radio shall be capable of isolating at least 90% of all detected faults to a Line Replaceable Unit (LRU) level.	(t)
3.1.10		Position, Navigation, and Timing (PNT)
3.1.10.1		The MP Radio Set shall be able to receive precision time and position data via GPS-153 formatted message from an external SAASM Global Positioning System (GPS) device.	(t)
3.1.10.2		The MP Radio Set shall be able to receive precision time and position data via GPS-153 formatted message from an external M-code Global Positioning System (GPS) device.	(t)
3.1.10.3		The MP Radio Set GPS shall incorporate an embedded GPS capability as a secondary means of obtaining PNT data.	(t)
3.1.10.3.1		The MP Radio Set embedded GPS accuracy shall be within 15 meters (95% CEP).	(t)
3.1.10.3.2		The MP Radio Set embedded GPS accuracy shall be within 3 meters (95% CEP).	(o)		52
3.1.10.4		The MP Radio Set GPS shall incorporate an embedded M-code GPS capability.	(o)		53
3.1.10.5		The MP Radio Set, when operating waveforms for transmitting Position Location Information (PLI) over IP data, shall use Variable Message Format (VMF) K5.01 IAW the MIL-STD-6017 and MIL-STD-6017A series with VMF header IAW MIL-STD-2045-47001C.	(t)
3.1.10.6		The MP Radio Set, when operating compatible waveforms, shall transmit Position Location Information (PLI) over IP data waveforms using Variable Message Format (VMF) K5.01 IAW the MIL-STD-6017E series with VMF header IAW MIL-STD-2045-47001C.	(o)		54
3.1.10.7		The MP Radio Set, when operating compatible waveforms, shall transmit PLI configurable by change in time or distance.	(t)
3.1.10.8		Reserved
3.1.10.9		Reserved
3.1.11		Operating Surface Temperature
3.1.11.1		Reserved
3.1.11.2		Reserved
3.1.11.3		Reserved
3.1.11.4		The MP Radio Set, shall not exceed the temperatures exposure limits for prolonged contract or handling and momentary contact IAW MIL-STD-1472H where prolonged contact or handling is defined as continuous physical touching of the radio surface for two seconds or longer and momentary contact is defined as continuous physical touching of the radio surface for less than two seconds. Radio surfaces shall not exceed momentary contact temperature of 60°C and prolonged contact or handling temperature of 49°C under all of the following steady state conditions:	(t)
3.1.11.4	a)	Ambient temperature of 22 ± 1°C,	(t)
3.1.11.4	b)	Exposure to 3 mph breeze,	(t)
3.1.11.4	c)	Radio not in rucksack,	(t)
3.1.11.4	d)	No solar loading contribution,	(t)
3.1.11.4	e)	Each of the waveform combinations WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, under battery power with the following maximum receive/transmit loading conditions of:	(t)
3.1.11.4		1) WREN TSM: 30-second PLI rate and 10% Push-to-Talk (PTT) Voice Transmit duty cycle in a 18 node net with 2 talk groups,	(t)
3.1.11.4		2) SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(t)
3.1.11.4		3) Sufficient transmit power on both channels simultaneously to achieve required ranges.	(t)
3.1.11.5		The MP Radio Set, shall not exceed the temperatures exposure limits for prolonged contract or handling and momentary contact IAW MIL-STD-1472H where prolonged contact or handling is defined as continuous physical touching of the radio surface for two seconds or longer and momentary contact is defined as continuous physical touching of the radio surface for less than two seconds. Radio surfaces shall not exceed momentary contact temperature of 60°C and prolonged contact or handling temperature of 49°C under all of the following steady state conditions:	(o)		55
3.1.11.5	a)	Ambient temperature of 33 ± 1°C,	(o)		56
3.1.11.5	b)	Exposure to 3 mph breeze,	(o)		57
3.1.11.5	c)	Radio not in rucksack,	(o)		58
3.1.11.5	d)	No solar loading contribution,	(o)		59
3.1.11.5	e)	Each of the waveform combinations WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, under battery power with the following maximum receive/transmit loading conditions of:	(o)		60
3.1.11.5		1) WREN TSM: 30-second PLI rate and 10% Push-to-Talk (PTT) Voice Transmit duty cycle in a 18 node net with 2 talk groups,	(o)		61
3.1.11.5		2) SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		62
3.1.11.5		3) Sufficient transmit power on both channels simultaneously to achieve required ranges.	(o)		63
3.1.11.6		The MP Radio Set, shall not exceed the temperatures exposure limits for prolonged contract or handling and momentary contact IAW MIL-STD-1472H where prolonged contact or handling is defined as continuous physical touching of the radio surface for two seconds or longer and momentary contact is defined as continuous physical touching of the radio surface for less than two seconds. Radio surfaces shall not exceed momentary contact temperature of 60°C and prolonged contact or handling temperature of 49°C under all of the following steady state conditions:	(o)		64
3.1.11.6	a)	Ambient temperature of 22 ± 1°C,	(o)		65
3.1.11.6	b)	Exposure to 3 mph breeze,	(o)		66
3.1.11.6	c)	Radio not in rucksack,	(o)		67
3.1.11.6	d)	No solar loading contribution,	(o)		68
3.1.11.6	e)	The waveform combination MUOS/SINCGARS in a 4 node net, under battery power with the following maximum receive/transmit loading conditions of:	(o)		69
3.1.11.6		1) MUOS Group: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		70
3.1.11.6		2) SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		71
3.1.11.6		3) Sufficient transmit power on both channels simultaneously to achieve required ranges.	(o)		72
3.1.11.7		The MP Radio Set, shall not exceed the temperatures exposure limits for prolonged contract or handling and momentary contact IAW MIL-STD-1472H where prolonged contact or handling is defined as continuous physical touching of the radio surface for two seconds or longer and momentary contact is defined as continuous physical touching of the radio surface for less than two seconds. Radio surfaces shall not exceed momentary contact temperature of 60°C and prolonged contact or handling temperature of 49°C under all of the following steady state conditions:	(o)		73
3.1.11.7	a)	Ambient temperature of 33 ± 1°C,	(o)		74
3.1.11.7	b)	Exposure to 3 mph breeze,	(o)		75
3.1.11.7	c)	Radio not in rucksack,	(o)		76
3.1.11.7	d)	No solar loading contribution,	(o)		77
3.1.11.7	e)	The waveform combination MUOS/SINCGARS in a 4 node net, under battery power with the following maximum receive/transmit loading conditions of:	(o)		78
3.1.11.7		1) MUOS Group: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		79
3.1.11.7		2) SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,	(o)		80
3.1.11.7		3) Sufficient transmit power on both channels simultaneously to achieve required ranges.	(o)		81
3.1.12		Reliability
3.1.12.1		The MP Radio Set shall demonstrate with 80% confidence a probability of at least 86% of operating over a 72 hour period without an essential function failure per channel. Essential Function Failures are defined in the United States Army Training and Doctrine Command (TRADOC) certified Failure Definitions and Scoring Criteria (FD/SC).	(t)
3.1.12.2		The MP Radio Set shall demonstrate with 80% confidence a Mean Time Between Essential Function Failure (MTBEFF) of no less than 477 hours per channel.	(t)
3.1.13		Operational Availability
3.1.13.1		The MP Radio Set shall demonstrate an operational availability of 0.96 per channel.	(t)
3.1.13.2		The MP Radio Set shall demonstrate an operational availability of 0.99 per channel.	(o)		82
3.2		Waveform Performance
3.2.1		Counter Radio Controlled Improvised Explosive Devices (RCIED) Electronic Warefare (CREW) Interoperability
3.2.1.1		The MP Radio Set shall be capable of operating in the same vehicle platform with the CREW Duke Family of Systems (FoS) when the MP Radio’s operating frequencies are accounted for (notched out) by the CREW Duke system.	(o)		83
3.2.2		Common Receive/Transmit Characteristics
3.2.2.1		The MP Radio Set shall maintain a spurious response rejection of at least 60 dB for signal bandwidths up to 1.5 MHz and frequency offsets greater than +/- 5% from the carrier.	(t)
3.2.2.2		The MP Radio Set shall provide at least 40 dBm (+/- 2 dB) of RF output power measured at the MP Radio RF output port for all frequencies on both channels simultaneously.	(t)
3.2.2.3		The MP Radio Set shall provide the ability to increase transmit power by at least 3 dB for mounted operation.	(o)		84
3.2.2.4		The MP Radio Set shall provide the ability to set transmit power levels.	(t)
3.2.2.5		The MP Radio Set shall provide networked voice and data exchange (i.e., mission command information) to support timely tactical actions while dispersed across the battlefield.	(t)
3.2.2.6		The MP Radio Set shall provide a voice call completion rate of at least 80% in a route and retrans scenario using any combination of two voice waveforms bridged by a MP Radio Set.	(t)
3.2.2.7		The MP Radio Set shall provide a voice call completion rate of at least 90% for all voice waveforms.	(t)
3.2.2.8		The MP Radio Set transmitted spurious output level shall be attenuated at least 50 dBc below carrier frequency when the operating at maximum power level.	(t)
3.2.2.9		The MP Radio Set shall support a transmit duty cycle of at least 40% for at least 5 minutes on both channels when operating simultaneously at power levels necessary to meet required ranges. The MP Radio Set may temporarily exceed the operating surface temperature limits of 3.1.11 when operating under these conditions.	(t)
3.2.3		Supported Waveforms
3.2.3.1		The MP Radio Set shall operate the following waveforms:	(t)
3.2.3.1.1		Reserved
3.2.3.1.2		Single Channel Ground and Airborne Radio System (SINCGARS) IAW 3.2.6	(t)
3.2.3.1.3		UHF SATCOM Military Tactical (MIL-STD-181B, MIL-STD-182A, MIL-STD-183A)2 IAW 3.2.7	(t)
3.2.3.1.4		MUOS (MIL-STD-188-187A) IAW 3.2.8	(t)
3.2.3.1.5		VHF/UHF Line-of-Sight (LOS) (VULOS) Amplitude Modulation (AM) / Frequency Modulation (FM) (ATC)1 IAW 3.2.11	(t)
3.2.3.1.6		Have Quick II (HQII)1 IAW 3.2.10	(t)
3.2.3.1.7		UHF SATCOM Integrated Waveform (IW) Phase I IAW 3.2.9.1.	(t)
3.2.3.1.8		UHF SATCOM IW Phase II IAW 3.2.9.2.	(t)
3.2.3.1.9		Reserved
3.2.3.1.10		UHF AM / FM / Phase Shift Keying (PSK) Military Tactical1 IAW 3.2.13	(t)
3.2.3.1.11		VHF FM Military Tactical1 IAW 3.2.14	(t)
3.2.3.1.12		High-Frequency (HF) Single Side Band (SSB) with Automatic Link Establishment (ALE) IAW 3.2.12	(o)		85
3.2.3.1.13		Enhanced Position Location Reporting System (EPLRS)	(o)		86
3.2.3.1.14		Mobile Satellite Service	(o)		87
3.2.3.1.15		Cellular Radio & Personal Communication Services (PCS)	(o)		88
3.2.3.1.16		Bowman VHF	(o)		89
3.2.3.1.17		Reserved
3.2.3.1.18		SATURN U.S. Specification ED4 IAW 3.2.15	(t)
3.2.3.1.19		WREN TSM IAW 3.2.4	(t)
3.2.3.1.20		WREN NB IAW 3.2.4	(t)
3.2.3.1.21		SATURN Edition 3 (ED3) IAW 3.2.15	(t)
3.2.3.1.21
3.2.3.1.21
3.2.3.1.21		VHF/UHF, AM/FM/PSK, ATC, and HQII waveforms may be combined as selectable modes under a single V/U-LOS waveform instantiation.	(t)
3.2.3.1.21		o as UHF SATCOM “DAMA” or Military Tactical	(t)
3.2.3.1.21
3.2.3.2		The MP Radio Set shall operate additional Configuration Steering Board approved waveforms not specifically identified in Paragraphs 3.2.3.1.	(o)		90
3.2.3.3		The MP Radio Set shall provide 2 independent channels which operate the following combinations of waveforms included on the radio:	(t)
3.2.3.3.1		Reserved
3.2.3.3.2		SINCGARS / SINCGARS	(t)
3.2.3.3.3		Reserved
3.2.3.3.4		Reserved
3.2.3.3.5		Reserved
3.2.3.3.6		SINCGARS / MUOS	(t)
3.2.3.3.7		VHF AM LOS (ATC) / VHF AM LOS (ATC)	(o)		91
3.2.3.3.8		VHF LOS (ATC) / VHF AM LOS (ATC)	(t)
3.2.3.3.9		HQII / HQII	(t)
3.2.3.3.10		Reserved
3.2.3.3.11		UHF SATCOM “IW” / HQII	(t)
3.2.3.3.12		UHF SATCOM “IW” / SINCGARS	(t)
3.2.3.3.13		UHF SATCOM “IW” / VHF/UHF LOS (VULOS) (ATC)	(t)
3.2.3.3.14		UHF SATCOM “IW” / VHF AM LOS (ATC)	(t)
3.2.3.3.15		VHF FM Military Tactical / VHF FM Military Tactical	(t)
3.2.3.3.16		UHF AM/FM PSK Military Tactical / UHF AM/FM PSK Military Tactical	(t)
3.2.3.3.17		Reserved
3.2.3.3.18		VHF/UHF LOS (VULOS) (ATC) / VHF FM Military Tactical	(t)
3.2.3.3.19		VHF/UHF LOS (VULOS) (ATC) / UHF AM/FM PSK Military Tactical	(t)
3.2.3.3.20		VHF AM LOS (ATC) / VHF FM Military Tactical	(t)
3.2.3.3.21		VHF AM LOS (ATC) / UHF AM/FM PSK Military Tactical	(t)
3.2.3.3.22		UHF AM/FM PSK Military Tactical / VHF FM Military Tactical	(t)
3.2.3.3.23		UHF SATCOM “IW” / VHF FM Military Tactical	(t)
3.2.3.3.24		UHF SATCOM “IW” / UHF AM/FM PSK Military Tactical	(t)
3.2.3.3.25		MUOS / UHF SATCOM “IW”	(o)		92
3.2.3.3.26		MUOS / UHF SATCOM “DAMA”	(o)		93
3.2.3.3.27		SINCGARS / UHF SATCOM “DAMA”	(t)
3.2.3.3.28		UHF LOS (ATC) / VHF AM LOS (ATC)	(t)
3.2.3.3.29		UHF AM/FM LOS (ATC) / VHF AM/FM LOS (ATC)	(t)
3.2.3.3.30		SINCGARS / VHF AM/FM LOS (ATC)	(t)
3.2.3.3.31		SINCGARS / UHF AM/FM LOS (ATC)	(t)
3.2.3.3.32		UHF SATCOM “DAMA” / VHF AM/FM LOS (ATC)	(t)
3.2.3.3.33		UHF SATCOM “DAMA” / UHF AM/FM LOS (ATC)	(t)
3.2.3.3.34		MUOS / VHF AM/FM LOS (ATC)	(t)
3.2.3.3.35		MUOS / UHF AM/FM LOS (ATC)	(t)
3.2.3.3.36		WREN TSM / VHF AM/FM LOS (ATC)	(t)
3.2.3.3.37		WREN TSM / UHF AM/FM LOS (ATC)	(t)
3.2.3.3.38		WREN TSM / WREN TSM	(t)
3.2.3.3.39		WREN TSM / SINCGARS	(t)
3.2.3.3.40		WREN TSM / UHF SATCOM “DAMA”	(t)
3.2.3.3.41		WREN TSM / MUOS	(t)
3.2.3.3.42		WREN TSM / UHF SATCOM “IW”	(t)
3.2.3.3.43		Reserved
3.2.3.3.44		WREN TSM / HF SSB w/ALE	(o)		94
3.2.3.3.45		WREN TSM / WREN NB	(t)
3.2.3.3.46		WREN NB / VHF AM/FM LOS (ATC)	(t)
3.2.3.3.47		WREN NB / UHF AM/FM LOS (ATC)	(t)
3.2.3.3.48		WREN NB / WREN NB	(t)
3.2.3.3.49		WREN NB / SINCGARS	(t)
3.2.3.3.50		WREN NB / UHF SATCOM “DAMA”	(t)
3.2.3.3.51		WREN NB / MUOS	(t)
3.2.3.3.52		WREN NB / UHF SATCOM “IW”	(t)
3.2.3.3.53		Reserved
3.2.3.3.54		WREN NB / HF SSB w/ALE	(o)		95
3.2.3.3.55		HQII / SINCGARS	(t)
3.2.3.3.56		U.S. SATURN ED4 / SINCGARS	(t)
3.2.3.3.57		U.S. SATURN ED4 / HQII	(t)
3.2.3.3.58		U.S. SATURN ED4 / U.S. SATURN ED4	(t)
3.2.3.3.59		U.S. SATURN ED4 / UHF SATCOM “IW”	(t)
3.2.3.3.60		SATURN ED3 / SINCGARS	(t)
3.2.3.3.61		SATURN ED3 / HQII	(t)
3.2.3.3.62		SATURN ED3 / SATURN ED3	(t)
3.2.3.3.63		SATURN ED3 / UHF SATCOM “IW”	(t)
3.2.3.3.63		ands defined in each waveform requirements section below.)	(t)
3.2.3.4		The MP Radio Set shall provide 2 independent channels which operate any combination of waveforms included on the radio.	(o)		96
3.2.3.5		The MP Radio Set shall provide internal route and retransmission capabilities as defined by the threshold combinations in Table 3‑1. (Note: The Route and Retransmit (R&R) capability includes two functions at the same security classification level: the route capability enabling information exchange between two different waveforms; and the retransmit capability enabling information exchange between different radio frequencies using the same waveform.) “Internal” R&R will be performed internally within one (1) two-channel R/T.	(t)
3.2.3.5.1		Internal Route and Retransmission Characteristics
3.2.3.5.1.1		The MP Radio Set shall allow the operator to initiate voice transmissions from either of the channel’s speaker/microphones, to send voice traffic over both channels simultaneously.	(o)		97
3.2.3.5.1.2		The MP Radio Set shall allow the operator to configure via HMI, the ability to mute or unmute the sound produced on speaker/microphones on: channel 1 only, channel 2 only, or both channels.	(o)		98
3.2.3.5.1.3		Route and retransmission for waveform combinations that support simultaneous voice and data, the MP Radio Set shall allow the operator to configure via HMI: voice only, data only, or both voice and data.	(o)		99
3.2.3.5.1.3
3.2.3.6		The MP Radio Set shall provide internal route and retransmission capabilities as defined by the delayed threshold combinations in Table 3‑1.	(td)
3.2.3.6		Table 3-1 is found on the separate TAB labeled "Table 3-1". Please indicate compliance by waveform combination on that TAB.
3.2.3.6			(td)
3.2.3.6
3.2.3.6
3.2.3.6
3.2.3.6
3.2.3.6
3.2.3.6
3.2.3.6
3.2.3.6
3.2.3.6
3.2.3.6
3.2.3.6
3.2.3.6
3.2.3.6		ed Data1,6	(td)
3.2.3.6		ed Data1,6	(td)
3.2.3.6		tched Data1,2	(td)
3.2.3.6		tched Data1,2	(td)
3.2.3.6
3.2.3.6		d Data1	(td)
3.2.3.6		d Data1	(td)
3.2.3.6
3.2.3.6
3.2.3.6		ice	(td)
3.2.3.6		e	(td)
3.2.3.6
3.2.3.6
3.2.3.6		3, Td = U.S. ED4)	(td)
3.2.3.6
3.2.3.6		, Td = U.S. ED4)	(td)
3.2.3.6
3.2.3.6		(ATC) Voice	(td)
3.2.3.6		ce	(td)
3.2.3.6		ical Voice	(td)
3.2.3.6		ry Voice	(td)
3.2.3.6
3.2.3.6
3.2.3.6
3.2.3.6
3.2.3.6		d Td = Delayed Threshold O = Objective To = Objective Threshold R = Reserved	(td)
3.2.3.6		ansmission both channels of the MP Radio shall be at the same security level (i.e., CUI to CUI, SAB to SAB)	(td)
3.2.3.6		net Switched Data to WREN TSM Ethernet Switched Data, limited to multicast traffic.	(td)
3.2.3.6		ticast traffic.	(td)
3.2.3.6		cludes both F1/F2 (different NET IDs) and F1/F1 (same NET IDs), internal redside routing. See Table 7-1, items 32 and 33.	(td)
3.2.3.6		ansmission between WREN CUI Voice and SINCGARS Voice PT modes, platform shall only allow configuration between WREN CUI and applicable SINCGARS PT/FHx modes. Platform shall not allow user configuration of WREN CUI and SINCGARS PT/SC.	(td)
3.2.3.6		outed Data, when in Transit sub-mode, Route and Retransmission is supported between Transit to Edge or Transit to Transit, where the waveform in Edge mode can be either TSM or NB.	(td)
3.2.3.7		Objective Route and Retransmission Capabilities. “External” R&R will utilize external device(s) (e.g., legacy SINCGARS F1/F2 retransmission audio cable for voice; router, etc. for data) to perform routing or retransmission of data or voice between any two (2) channels on two (2) separate two-channel R/Ts).
3.2.3.7.1		The MP Radio Set shall provide external retransmission capabilities between SINCGARS voice / SINCGARS voice.	(o)		100
3.2.3.7.2		The MP Radio Set shall provide external routing capabilities between SINCGARS voice / WREN voice.	(o)		101
3.2.3.7.3		Reserved
3.2.3.7.4		The MP Radio Set shall provide external routing capabilities between SINCGARS Voice / MUOS Voice.	(o)		102
3.2.3.7.5		The MP Radio Set shall provide external retransmission capabilities between WREN voice / WREN voice.	(o)		103
3.2.3.7.6		The MP Radio Set shall provide external routing capabilities between WREN voice / SATCOM DAMA voice.	(o)		104
3.2.3.7.7		The MP Radio Set shall provide external routing capabilities between WREN voice / SATCOM IW voice.	(o)		105
3.2.3.7.8		The MP Radio Set shall provide external routing capabilities between WREN voice / MUOS voice.	(o)		106
3.2.3.7.9		Reserved
3.2.3.7.10		Reserved
3.2.3.7.11		Reserved
3.2.3.7.12		The MP Radio Set shall provide external retransmission capabilities between SINCGARS Data / SINCGARS Data.	(o)		107
3.2.3.7.13		The MP Radio Set shall provide external routing capabilities between SINCGARS Data / MUOS Data.	(o)		108
3.2.3.7.14		The MP Radio Set shall provide external retransmission capabilities between WREN IP data / WREN IP data.	(o)		109
3.2.3.7.15		The MP Radio Set shall provide external routing capabilities between WREN IP data / MUOS IP data.	(o)		110
3.2.3.7.16		Reserved
3.2.3.7.17		Reserved
3.2.3.7.18		Reserved
3.2.3.7.19		Reserved
3.2.3.7.20		The MP Radio Set, when configured with WREN TSM on one channel and MUOS on the other channel shall take multicast packets from the WREN TSM channel and send them to a pre-configured address through the MUOS channel using a point to net MUOS service.	(o)		111
3.2.3.7.21		The MP Radio Set, when configured with WREN TSM on one channel and MUOS on the other channel shall take packets received on MUOS from a pre-configured address and send to the WREN TSM channel as standard multicast packets.	(o)		112
3.2.4		WREN Requirements
3.2.4.1		WREN TSM Operating Bandwidths
3.2.4.1.1		The MP Radio Set shall operate WREN TSM with 1.2 MHz channel bandwidth.	(t)
3.2.4.1.2		The MP Radio Set shall operate WREN TSM with 3.6 MHz channel bandwidth.	(t)
3.2.4.1.3		The MP Radio Set shall operate WREN TSM with 10 MHz channel bandwidth.	(o)		113
3.2.4.1.4		The MP Radio Set shall operate WREN TSM with 20 MHz channel bandwidth.	(o)		114
3.2.4.1.5		The MP Radio Set shall operate WREN TSM with 40 MHz channel bandwidth. This mode shall be supported in frequency bands of operation at or above 450 MHz.	(o)		115
3.2.4.2		WREN TSM Operating Frequency Range
3.2.4.2.1		The MP Radio Set shall operate WREN TSM for threshold bandwidths in frequency range:	(t)
3.2.4.2.1		1) 225-450 MHz	(t)
3.2.4.2.1		2) 1325-1450 MHz	(t)
3.2.4.2.1		3) 1755-1850 MHz	(t)
3.2.4.2.2		Reserved
3.2.4.3		WREN TSM Security
3.2.4.3.1		The MP Radio Set, when operating WREN, shall interoperate with other TSM networks running compatible versions of TSM for Controlled Unclassified Information (CUI) voice and data.	(t)
3.2.4.3.2		The MP Radio Set, when operating WREN, shall interoperate with other TSM networks running compatible versions of TSM for Secret And Below (SAB) voice and data, IAW the C5ISR WREN INFOSEC Design Document.	(t)
3.2.4.3.3		The MP Radio Set, when operating WREN, shall interoperate with other TSM networks running compatible versions of TSM for Top Secret (TS) voice and data.	(o)		116
3.2.4.3.4		The MP Radio Set, when operating WREN shall support “Black” relay of TSM traffic at CUI and SAB levels.	(t)
3.2.4.3.5		The MP Radio Set, when operating WREN shall support “Black” relay of TSM traffic at TS level.	(o)		117
3.2.4.3.6		The MP Radio Set, when operating WREN shall support Multiple Independent Levels of Security (MILS). MILS is a traffic processing environment with high enough assurance to attain approval to operate mixed security domains simultaneously, on the same WREN network and on the same radio platform, up to Secret. WREN shall support MILS IAW the C5ISR WREN OTA Specification Volume I: Layer 3 Networking & Services.	(t)
3.2.4.3.6.1		The MP Radio Set, when operating MILS on WREN shall support simultaneous SAB data and CUI data on each channel.	(t)
3.2.4.3.6.2		The MP Radio Set, when operating MILS on WREN shall support SAB voice or CUI voice on each channel.	(t)
3.2.4.3.7		The MP Radio Set, when operating WREN shall support Multiple Independent Levels of Security (MILS). MILS is a traffic processing environment with high enough assurance to attain approval to operate mixed security domains simultaneously, on the same WREN network and on the same radio platform, up to Top Secret. WREN shall support MILS IAW the C5ISR WREN OTA Specification Volume I: Layer 3 Networking & Services.	(o)		118
3.2.4.3.8		The MP Radio Set, when configured for SAB and operating WREN TSM, shall support monitoring of CUI voice of the respective voice group, when CUI voice has been provisioned and is present on the respective voice group. Shall provide user configurability to turn this feature on/off.	(o)		119
3.2.4.3.9		The MP Radio Set, when operating WREN in SAB, shall support the ability to use any available WREN Traffic Encryption Key (TEK) that is loaded on the MP Radio Set, such that it doesn’t have to be referenced from the mission plan or restrict the user to what is in the mission plan.	(o)	User can change to any TEK filled in the radio.	120
3.2.4.3.10		The MP Radio Set, when operating WREN, shall support the ability to import custom certificates for WREN blackside web application management.	(o)		121
3.2.4.4		WREN TSM Operating Characteristics
3.2.4.4.1		The MP Radio Set, when operating WREN TSM, shall support user configurable 0 through 32 independent digital voice channels. The setting shall be configurable in step sizes of 1.	(t)
3.2.4.4.2		The MP Radio Set, when operating WREN TSM, shall provide unicast data throughput of up to 500 kbps for 1 hop while using 1.2 MHz of bandwidth when the RF level at the receiver is at least −96 dBm and when configured for zero voice channels.	(t)
3.2.4.4.3		The MP Radio Set, when operating WREN TSM, shall provide multicast data throughput of up to 100 kbps for up to 8 hops while using 1.2 MHz of bandwidth when the RF level at the receiver is at least −96 dBm and when configured for zero voice channels.	(t)
3.2.4.4.4		The MP Radio Set, when operating WREN TSM, shall provide unicast data throughput of up to 1 Mbps for 1 hop while using 3.6 MHz of bandwidth when the RF level at the receiver is at least −96 dBm and when configured for zero voice channels.	(t)
3.2.4.4.5		The MP Radio Set, when operating WREN TSM, shall provide multicast data throughput of up to 250 kbps for up to 8 hops while using 3.6 MHz of bandwidth when the RF level at the receiver is at least −96 dBm and when configured for zero voice channels.	(t)
3.2.4.4.6		The MP Radio Set, when operating WREN TSM, shall support network merge time of less than 15 seconds between two networks of 60 nodes with clear line-of-sight voice and data exchanges. (Note: Network merge is defined as ability to pass voice and PLI traffic.)	(t)
3.2.4.4.7		The MP Radio Set, when operating WREN TSM, shall join an existing network in less than 5 seconds. (Note: Join is defined as ability to pass voice and PLI traffic.)	(t)
3.2.4.4.8		The MP Radio Set, when operating WREN TSM, shall undergo an interoperability and conformance assessment, at the WREN Reference Implementation laboratory with Product Manager (PdM) Waveforms oversight (Appointed by DoD Chief Information Officer (CIO) as Lead Service for WREN and TSM waveforms), IAW C5ISR WREN TSM OTA Specifications.	(t)
3.2.4.4.9		The MP Radio Set, when operating WREN TSM, shall support Layer 3 Networking and Services, IAW the C5ISR WREN OTA Specification Volume I: Layer 3 Networking & Services. The Layer 3 Networking and Services mode of operation shall be supported in CUI and SAB configurations.	(t)
3.2.4.4.10		The MP Radio Set, when operating WREN TSM, shall interoperate with other WREN TSM networks running Layer 3 Networking and Services, IAW the C5ISR WREN OTA Specification Volume I: Layer 3 Networking & Services.	(t)
3.2.4.4.11		The MP Radio Set, when operating WREN TSM, shall support Emissions Control (EMCON), IAW the C5ISR WREN OTA Specifications.	(t)
3.2.4.4.11
3.2.4.5		WREN TSM Receive Sensitivity
3.2.4.5.1		The MP Radio Set, when operating WREN TSM using 1.2 MHz of bandwidth, shall have a receive sensitivity of at least -100 dBm with 1% packet loss assuming 520 bytes per packet at a rate of 5 packets per second.	(t)
3.2.4.5.2		The MP Radio Set, when operating WREN TSM using 3.6 MHz of bandwidth, shall have a receive sensitivity of at least -97 dBm with 1% packet loss assuming 520 bytes per packet at a rate of 5 packets per second.	(t)
3.2.4.6		WREN TSM PLI Completion
3.2.4.6.1		The MP Radio Set, when operating WREN TSM, shall provide a PLI message completion rate of at least 90% in a 120 node network of TSM radios in 5 minutes of monitoring.	(t)
3.2.4.6.2		An external message gateway using a single MP radio using a valid route and retransmission WREN to WREN configuration, with each channel operating in a different 60 node WREN TSM network, shall not further degrade the traffic received. The offered load received from the first 60 node network on channel 1 of the MP radio, shall be route and retransmitted to the second 60 node network on channel 2 of the MP radio, the resulting offered load being route and retransmitted (from channel 1 to channel 2), shall result in at least an 80% message completion rate in 5 minutes of monitoring. The performance from channel 2 to channel 1 shall be symmetrical. The network capacity on channel 1 and channel 2 shall be symmetrical.	(t)
3.2.4.7		WREN TSM Transmission Range
3.2.4.7.1		The MP Radio Set, when operating WREN TSM in a Mounted / TOC configuration, shall provide transmission ranges of at least 10 km, point-to-point, RF Line-of-Sight as defined in Appendix C provided a 4 meter antenna placement above flat open terrain.	(t)
3.2.4.7.2		The MP Radio Set, when operating WREN TSM in a Mounted / TOC configuration, shall provide transmission ranges of at least 40 km, point-to-point, RF Line-of-Sight as defined in Appendix C provided any obstruction, including terrain, no greater than 40% across the radius at any point along the ellipsoid as shown in Appendix C, with a 4 meter antenna height.	(o)		122
3.2.4.7.3		The MP Radio Set, when operating WREN TSM in a Dismounted configuration, shall provide transmission ranges of at least 3 km, point-to-point, RF Line-of-Sight as defined in Appendix C provided a 2 meter antenna placement above flat open terrain.	(t)
3.2.4.7.4		The MP Radio Set, when operating WREN TSM in a Dismounted configuration, shall provide point to point transmission ranges of at least 10 km, RF Line-of-Sight as defined in Appendix C provided a 2 meter antenna placement above flat open terrain.	(o)		123
3.2.4.7.5		The MP Radio Set, effective transmissions ranges when operating WREN TSM in the frequency bands of operation is a function of the receive sensitivity, channel condition, transmit power, and overall Path Loss Capability (PLC). In a mounted/vehicular, and TOC configuration the MP Radio Set, shall support at least 50W RF output power. For WREN TSM operation on the MP Radio Set it is assumed that the antenna attaches directly to the radio for dismounted configurations. For installations on mounted/vehicular platforms that require cables, the RF cables that connect the MP Radio Set to the antenna shall have less than 0.06 dB/ft loss between 225-450 MHz and 1250-1850 MHz.	(o)		124
3.2.4.8		WREN TSM Talk Group
3.2.4.8.1		Reserved
3.2.4.8.2		The MP Radio Set, when operating WREN TSM, shall be capable of actively participating (transmit and receive) in one voice call group in half duplex mode while monitoring receive activity on up to 2 additional voice call groups. Voice group being monitored shall be distinguishable from the active voice group.	(t)
3.2.4.9		WREN NB Operating Bandwidths
3.2.4.9.1		The MP Radio Set shall operate WREN NB with 50 kHz instantaneous channel bandwidth.	(t)
3.2.4.10		WREN NB Operating Frequency Range
3.2.4.10.1		The MP Radio Set shall operate WREN NB from:	(t)
3.2.4.10.1		1) 30-88 MHz	(t)
3.2.4.10.1		2) 225-450 MHz	(t)
3.2.4.10.1		3) 1325-1450 MHz	(t)
3.2.4.10.1		4) 1755-1850 MHz	(t)
3.2.4.10.2		Reserved
3.2.4.10.3		The MP Radio Set when operating WREN-NB shall support hopping over, up to 200 MHz or the maximum spectrum bands listed in the WREN NB Operating Frequency Ranges, whichever is lower.	(t)
3.2.4.11		WREN NB Operating Characteristics
3.2.4.11.1		The MP Radio Set shall operate WREN NB IAW the C5ISR WREN OTA Specifications.	(t)

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Mar 13, 2025.