MP Compliance Matrix_PRD v6.0.xlsx

XLSX spreadsheet 311 KB Posted

Attached to
Manpack Radio Production, Engineering and Sustainment Follow-On Procurement - Request for Information
Solicitation number
W15P7T-24-R-MP01
Issued by

About this file

Written by GovTribe AI ·

This document is a Request for Information (RFI) from the Department of the Army Materiel Command Army Contracting Command Aberdeen Proving Ground for the follow-on procurement of the Manpack Radio, the Army's premier software-defined, multi-mode radio with NSA Type 1 encryption capability. The Army is conducting market research to identify potential sources with capabilities for high-rate production and cost-effective sustainment of mounted and dismounted variants of the Manpack Radio. The RFI seeks information on existing products or technologies that can meet performance requirements outlined in the attached Draft Manpack Radio Performance Requirements Document. Responses should include details on corporate capabilities, production capacity, cost estimates, program schedules, and risk mitigation approaches. The RFI requests respondents provide point of contact information, business size status, and any intent to participate as a prime or subcontractor. Responses are due by July 29, 2024, and the Government may engage in one-on-one discussions and capability demonstrations with respondents to aid in market research. The procurement is anticipated to have a September 2, 2026 award date.

View the file

Other files

File Type Posted
MP RFI 24RMP01 Amend 01 03132025.docx DOCX document
MP RFI 24RMP01 Amend 01 Attach 2 Special Depot Maint and Repair Transition Reqts.docx DOCX document
MP RFI 24RMP01 Amend 1 PRD_v8.0_20250312.pdf PDF
MP RFI 24RMP01 Amend 01 Compliance Matrix Objectives 02032025.xlsx XLSX spreadsheet
MP RFI 24RMP01 Amend 01 Attach 1 Special Reqts Escrow Account Data Pkg.docx DOCX document
MP PRD_v6.0_20231128_DRAFT.docx DOCX document
Manpack Recompete RFI 1_Question__Comment_Matrix.xlsx XLSX spreadsheet

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Output

Manpack Radio PRD COMPLIANCE MATRIX
Company NameSignature

Preparer's Name Date

The purpose of the Manpack Radio PRD COMPLIANCE MATRIX is for the responder to self-certify to the PRD requirements that their Mission-Ready Manpack Radio achieves. In response Column “Compliant Y/N” , the responder shall indicate for all thresholds and objectives, compliance with the technical requirement by indicating a "Y" or "N" for the radio identified above by the Nomenclature/Part Number. All items certified in Column 1 shall also be certified in Column 2 and/or 3. In response Column “Included in MP Baseline Radio Y/N”, the responder shall indicate whether or not the technical requirement certified in Column “Compliant Y/N”, is included in the offered baseline radio by indicating a "Y" or "N". Column "Separately Orderable Capability Y/N" identifies additional capabilities that are separately orderable from the baseline radio. For Column "Separately Orderable Capability Y/N", the responder shall certify to the PRD capabilities that shall be provided when the separate PRD paragraphs referencing the capbilities are ordered. In response Column “Other Waveforms Certifications”, the company shall indicate the title of the Waveform(s) the Manpack Radio is capable of. For Columns 1-3, the Offeror shall not provide a response other than "Y" or "N". For all columns, the Offeror shall not leave any PRD threshold requirement blank. All "Y" certified thresholds and objectives are expected to be met or exceeded to be compliant. In the event the Offeror cannot meet a particular threshold, please elaborate, including a timeline to meet threshold, in the "Comments Column".
Response Columns
LinePRD ReferenceSubsectionSpecification SectionReqCompliant Y/NIncluded in MP Baseline Radio Y/NSeparately Orderable Capability Y/NOther Waveforms CertificationComments
0This document contains Controlled Unclassified Information (CUI) when filled in.CONTROLLED BY: USAASC

CONTROLLED BY: PEO C3T PM TR PdM HMS CUI CATEGORY: CTI, EXPORT CONTROL (when filled in)

LIMITED DISSEMINATION CONTROL: FEDCOM, NOFORN

DISTRIBUTION: D (when filled in) POC: Blaise Sceski: (443) 395-2939

13Manpack Radio Set Requirements
23The following requirements, except where specified, apply to mounted, dismounted, and TOC configurations of the MP Radio Set for the Universal Variant. Applicability of these requirements to the Lite Variant are provided in Appendix A.
33.1MP Radio Set Characteristics
43.1.1Channels and Configurations
53.1.1.1The MP Radio Set shall consist of one MP Radio with Ancillaries as required to meet threshold requirements in Paragraphs 3 through 9.(t)
63.1.1.2The MP Radio Set shall operate two independent channels simultaneously.(t)
73.1.1.3The MP Radio Set shall support operations in a Dismounted configuration.(t)
83.1.1.4The MP Radio Set shall support operations in a Mounted configuration.(t)
93.1.1.5The MP Radio Set shall support operations in a TOC configuration.(t)
103.1.2Mission Weight and Battery Life
113.1.2.1The MP Radio Set Dismounted configuration mission weight shall be no more than 16.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 8 hours under battery power with the following maximum receive/transmit loading conditions of:(t)
123.1.2.1a)WREN TSM: 30-second PLI rate and 10% Push-to-Talk (PTT) Voice Transmit duty cycle in a 18 node net with 2 talk groups,(t)
133.1.2.1b)SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(t)
143.1.2.1c)Sufficient transmit power on both channels simultaneously to achieve required ranges.(t)
153.1.2.2The MP Radio Set Dismounted configuration mission weight shall be no more than 15.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 8 hours under battery power with the following maximum receive/transmit loading conditions of:(o)
163.1.2.2a)WREN TSM: 30-second PLI rate and 10% PTT Voice Transmit duty cycle in a 18 node net with 2 talk groups,(o)
173.1.2.2b)SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(o)
183.1.2.2c)Sufficient transmit power on both channels simultaneously to achieve required ranges.(o)
193.1.2.3The MP Radio Set Dismounted configuration mission weight shall be no more than 9.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 8 hours under battery power with the following maximum receive/transmit loading conditions of:(o)
203.1.2.3a)WREN TSM: 30-second PLI rate and 10% PTT Voice Transmit duty cycle in a 18 node net with 2 talk groups,(o)
213.1.2.3b)SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(o)
223.1.2.3c)Sufficient transmit power on both channels simultaneously to achieve required ranges.(o)
233.1.2.4The MP Radio Set Dismounted configuration mission weight shall be no more than 16.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 24 hours under battery power with the following maximum receive/transmit loading conditions of:(o)
243.1.2.4a)WREN TSM: 30-second PLI rate and 10% PTT Voice Transmit duty cycle in a 18 node net with 2 talk groups,(o)
253.1.2.4b)SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(o)
263.1.2.4c)Sufficient transmit power on both channels simultaneously to achieve required ranges.(o)
273.1.2.5The MP Radio Set measured mission weight shall increase by no more than 3.5 lbs per channel when operating MUOS and Ultra-High Frequency Satellite Communications (UHF SATCOM) using Dismounted Satellite Communications At-the-Pause Antennas IAW paragraph 5.1.3.1.(t)
283.1.2.6The MP Radio Set measured mission weight shall increase by no more than 1.0 lbs per channel when operating MUOS using Dismounted MUOS On-the-Move Antennas IAW paragraph 5.1.3.2.(t)
293.1.2.7Reserved
303.1.2.8The MP Radio Set Dismounted configuration mission weight shall be no more than 16.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 12 hours under battery power with the following maximum receive/transmit loading conditions of:(o)
313.1.2.8a)WREN TSM: 30-second PLI rate and 10% PTT Voice Transmit duty cycle in a 18 node net with 2 talk groups,(o)
323.1.2.8b)SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(o)
333.1.2.8c)Sufficient transmit power on both channels simultaneously to achieve required ranges.(o)
343.1.2.9The MP Radio Set Dismounted configuration mission weight shall be no more than 16.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 16 hours under battery power with the following maximum receive/transmit loading conditions of:(o)
353.1.2.9a)WREN TSM: 30-second PLI rate and 10% PTT Voice Transmit duty cycle in a 18 node net with 2 talk groups,(o)
363.1.2.9b)SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(o)
373.1.2.9c)Sufficient transmit power on both channels simultaneously to achieve required ranges.(o)
383.1.2.10The MP Radio Set Dismounted configuration mission weight shall be no more than 16.0 pounds including one MP Radio and all Ancillaries required to operate each of the waveform combinations, WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, for 20 hours under battery power with the following maximum receive/transmit loading conditions of:(o)
393.1.2.10a)WREN TSM: 30-second PLI rate and 10% PTT Voice Transmit duty cycle in a 18 node net with 2 talk groups,(o)
403.1.2.10b)SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(o)
413.1.2.10c)Sufficient transmit power on both channels simultaneously to achieve required ranges.(o)
423.1.2.11The MP Radio Set Dismounted configuration shall operate the waveform combination MUOS/SINCGARS in a 4 node net, for 8 hours under battery power with the following maximum receive/transmit loading conditions of:(o)
433.1.2.11a)MUOS Group: 6:3:1 (listen:receive:transmit) duty cycle,(o)
443.1.2.11b)SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(o)
453.1.2.11c)Sufficient transmit power on both channels simultaneously to achieve required ranges.(o)
463.1.2.12The MP Radio Set Dismounted configuration shall operate the waveform combination MUOS/SINCGARS in a 4 node net, for 12 hours under battery power with the following maximum receive/transmit loading conditions of:(o)
473.1.2.12a)MUOS Group: 6:3:1 (listen:receive:transmit) duty cycle,(o)
483.1.2.12b)SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(o)
493.1.2.12c)Sufficient transmit power on both channels simultaneously to achieve required ranges.(o)
503.1.2.13The MP Radio Set Dismounted configuration shall operate the waveform combination MUOS/SINCGARS in a 4 node net, for 16 hours under battery power with the following maximum receive/transmit loading conditions of:(o)
513.1.2.13a)MUOS Group: 6:3:1 (listen:receive:transmit) duty cycle,(o)
523.1.2.13b)SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(o)
533.1.2.13c)Sufficient transmit power on both channels simultaneously to achieve required ranges.(o)
543.1.3Power
553.1.3.1The MP Radio Set shall operate using rechargeable batteries, non-rechargeable batteries, and AC Adapter power sources IAW Paragraph 5.3.(t)
563.1.3.2The MP Radio Set, when in mounted configuration, shall have the ability to operate using vehicle prime power (IAW MIL-STD-1275E, Paragraphs 5.1.1.1 steady state over the voltage range 20-33 VDC).(t)
573.1.3.3The MP Radio Set, when in a mounted configuration, shall operate through cranking voltages as specified in MIL-STD-1275E, during which time the unit may stop transmitting and receiving but will not be damaged or lose any presets.(t)
583.1.3.4The MP Radio Set shall provide capability to prevent radio damage caused by battery reverse polarity.(t)
593.1.3.5The MP Radio Set shall monitor remaining battery power and provide the status information to the operator on the HMI when operating with smart batteries (e.g., compliant with Smart Battery Data Specification, Rev 1.1.)(t)
603.1.3.6The MP Radio Set shall provide capability to use standard army non-rechargeable and rechargeable -90 series batteries.(t)
613.1.3.7The peak power consumption of two MP Radio Sets, when installed in a dual vehicle mount, including the mount, but excluding any External High Power Amplifiers, shall not exceed 600W.(t)
623.1.3.8The peak power consumption of two MP Radio Sets, when installed in a dual vehicle mount, including the mount, but excluding any External High Power Amplifiers, shall not exceed 500W.(o)
633.1.3.9The peak power consumption of a MP Radio Set, when installed in a Single vehicle mount, including the mount, but excluding any External High Power Amplifiers, shall not exceed 300W.(t)
643.1.3.10The peak power consumption of a MP Radio Set, when installed in a Single vehicle mount, including the mount, but excluding any External High Power Amplifiers, shall not exceed 250W.(o)
653.1.3.11The MP Radio Set shall provide for the capability to replace prime power batteries without the use of tools.(t)
663.1.3.12The MP Radio Set shall provide for the capability to replace all batteries without the use of tools.(o)
673.1.3.13The MP Radio Set shall provide circuitry to prevent damage from over-voltage, over-current, and over-temperature conditions.(t)
683.1.3.14The MP Radio Set, when in mounted configuration, shall have the ability to operate using vehicle prime power (IAW MIL-STD-1275F, Paragraphs 5.1.1.1 steady state over the voltage range 20-33 VDC).(o)
693.1.3.15The MP Radio Set, when in a mounted configuration, shall operate through cranking voltages as specified in MIL-STD-1275F, during which time the unit may stop transmitting and receiving but will not be damaged or lose any presets.(o)
703.1.4Connectors and Interfaces
713.1.4.1The MP Radio Set shall provide connectors compatible with the U-283/U, 6 pin for each channel of audio and the key fill connector.(t)
723.1.4.2The MP Radio Set shall provide legacy serial data interface IAW MIL-STD-188-114A as shown Paragraph 8.3 for compatibility with Fires support systems.(t)
733.1.4.3The MP Radio Set shall provide electrical interface for headsets, speaker/microphone, and handset IAW MIL-DTL-55116C.(t)
743.1.4.4The MP Radio Set shall provide one data interface per channel and a single interface for radio control compatible with Ethernet over Universal Serial Bus (USB) 2.0 or higher compatible with Android.(t)
753.1.4.5The MP Radio Set shall provide Electronic Industries Association EIA-232 interface.(t)
763.1.4.6The MP Radio Set shall provide interface for 10/100 Mbps, auto-negotiated Ethernet per channel.(t)
773.1.4.7The MP Radio Set shall provide interface for 10/100/1000 Mbps, auto-negotiated Ethernet per channel.(o)
783.1.4.8The MP Radio Set shall provide interface for auto-MDI-X Ethernet per channel.(o)
793.1.4.9The MP Radio Set shall provide Type N Female RF interfaces for all dismounted antennas specified in Paragraphs 5.1.1 and 5.1.3, either directly or by use of adapters.(t)
803.1.4.10The MP Radio Set shall provide Type N Female RF interfaces for all mounted antennas specified in Paragraphs 5.1.2 and 5.1.4, either directly or by use of adapters.(t)
813.1.4.11The MP Radio Set shall provide Type TNC Female RF interfaces for GPS antenna specified in Paragraph 5.1.5 for all mounted configurations, either directly or by use of adapters.(t)
823.1.4.12The MP Radio Set shall provide an Ethernet and IP over USB interface for SNMPv3 monitoring and control.(t)
833.1.4.13The MP Radio Set shall sustain no damage when any Radio Frequency (RF) output port is open or shorted.(t)
843.1.4.14The MP Radio Set shall be compliant with Internet Protocol Version 4 (IPv4).(t)
853.1.4.15The MP Radio Set shall be compliant with Internet Protocol Version 6 (IPv6).(o)
863.1.5Victory In-Vehicle Network (IVN)
873.1.5.1The MP Radio Set, when in a vehicle-mounted configuration, shall provide an interface to an Ethernet-based IVN as specified in section 8.5.1.1 of the VICTORY 1.9 specification.(o)
883.1.5.2The MP Radio Set, when in a vehicle-mounted configuration, shall provide a Precision Time Protocol (PTP) client to receive time information via PTPv2 as specified in section 7.1.1.1.2 of the VICTORY 1.9 specification.(o)
893.1.5.3The MP Radio Set, when in a vehicle-mounted configuration, shall subscribe to and receive multicast position information from the data interface of a position service as specified in section 7.1.2.1 of the VICTORY 1.9 specification.(o)
903.1.5.4Reserved
913.1.6Waveform and Preset Storage
923.1.6.1The MP Radio Set shall store all operational parameters required by all waveforms for at least 9 months after loss of primary or main battery power source.(t)
933.1.6.2The MP Radio Set shall have the storage capacity to store at least 100 presets, with a minimum of 50 presets per channel.(t)
943.1.7Waveform Network Management and Planning
953.1.7.1The MP Radio Set shall be fully configurable using a J-TNT or Ruggedized Application Platform-Tactical Radio (RAP-TR) laptop.(t)
963.1.7.2Reserved
973.1.7.3Reserved
983.1.7.4The MP Radio Set shall support loading of all software and mission parameters using J-TNT or RAP-TR laptop.(t)
993.1.7.5Reserved
1003.1.7.6The MP Radio Set shall provide the ability for software and mission data to be loaded via USB mass storage device drag and drop method.(t)
1013.1.7.7The MP Radio Set shall be able to be monitored and controlled via SNMPv3.(t)
1023.1.7.8The MP Radio Set core SNMP monitoring and control functionality shall include the minimum capabilities as described in Paragraph 9.(t)
1033.1.7.9The MP Radio Set shall implement the Program Manager for Tactical Radios (PM TR) Common Management Information Base (MIB) Version 2.0.4 for all channels and/or control of the radio. (Note: The PM TR Common MIB Version 2.0.4 specification is available in the PM TR Configuration Control Repository (PM TR CCR)).(o)
1043.1.7.10The MP Radio Set shall be able to be fully configured with key material and mission preset information via the AN/PYQ-10 Simple Key Loader (SKL).(t)
1053.1.7.11The MP Radio Set shall support fill of SINCGARS loadsets using the SKL.(t)
1063.1.7.12The MP Radio Set shall allow user to operate multiple hopsets from a single SINCGARS loadset.(t)
1073.1.7.13The MP Radio Set shall be capable of using the Next Generation Simple Key Loader (SKL) to load COMSEC and presets for all capable waveforms.(o)
1083.1.7.14The MP Radio Set shall support Over the Air transmission and reception of new mission presets IAW the JTNC IR OTAM Application Note Unit Task Re-organization (UTR) Enhancement Enterprise OTAM 1.2 dated September 2017, or later (superseded by paragraph 3.1.7.17).(t)
1093.1.7.15The MP Radio Set shall be configurable with the WREN defined network management and planning capability for configuring, loading, controlling, and monitoring of the radio for TSM operation, using the TrellisWare TSM Application Programming Interface (API).(t)
1103.1.7.16The MP Radio Set shall be interoperable with Army network management tools and shall support the network manager capabilities to plan, implement, manage, control, identify, monitor, and configure radio user access and profile parameters of the network to include, but not limited to; voice call groups participation and physical network presets.(t)
1113.1.7.17The MP Radio Set shall support Over the Air transmission and reception of new mission presets IAW the JTNC IR Over-the-Air Server Service (OSS) Application Note for the eOTAM 2.0, or later (supersedes paragraph 3.1.7.14).(td)
1123.1.7.18The MP Radio Set shall support Mode 2/3 fill of SINCGARS IAW Drawing A3191133 Revision A, Specification - Interface for Mode 2 and Mode 3 Fill.(o)
1133.1.7.19The MP Radio Set shall implement the PM TR Universal Radio API Version 2.0.0 to provision, configure, and monitor the radio in a way common to other radios in the PM TR portfolio.(o)
1143.1.8Cold and Warm Start
1153.1.8.1Reserved
1163.1.8.2Reserved
1173.1.8.3The MP Radio Set, when operating WREN and SINCGARS, shall allow operators to load mission data and crypto keys, and place both channels of the radio into operation (enter into network(s)) within 11 minutes, from powering on a zeroized radio, without requiring maintenance personnel.(t)
1183.1.8.4The MP Radio Set, when operating WREN and SINCGARS, shall allow operators to place both radio channels into operation (enter into network(s)) within 5 minutes or less from power on assuming mission data and crypto keys have been previously loaded, without requiring maintenance personnel.(t)
1193.1.8.5The MP Radio Set, when operating any waveform, shall allow operators to place both radio channels into operation from power on using mission data and crypto keys which have been previously loaded, without requiring maintenance personnel.(t)
1203.1.8.6The MP Radio Set, when operating any combination of waveforms, shall allow operators to load mission data and crypto keys, and place both channels of the radio into operation (enter into network(s)) within 11 minutes, from powering on a zeroized radio, without requiring maintenance personnel.(o)
1213.1.8.7The MP Radio Set, when operating any combination of waveforms, shall allow operators to place both radio channels into operation (enter into network(s)) within 5 minutes or less from power on assuming mission data and crypto keys have been previously loaded, without requiring maintenance personnel.(o)
1223.1.9Self Test and Status
1233.1.9.1The MP Radio shall perform Power On Self-Test (POST) to determine operational status.(t)
1243.1.9.2The MP Radio shall be capable of performing Continuous and User Initiated Built-In-Test (BIT) to detect and locate faults.(t)
1253.1.9.3The MP Radio shall be capable of detecting at least 95% of all faults.(t)
1263.1.9.4The MP Radio shall be capable of isolating at least 90% of all detected faults to a Line Replaceable Unit (LRU) level.(t)
1273.1.10Position, Navigation, and Timing (PNT)
1283.1.10.1The MP Radio Set shall be able to receive precision time and position data via GPS-153 formatted message from an external SAASM Global Positioning System (GPS) device.(t)
1293.1.10.2The MP Radio Set shall be able to receive precision time and position data via GPS-153 formatted message from an external M-code Global Positioning System (GPS) device.(t)
1303.1.10.3The MP Radio Set GPS shall incorporate an embedded GPS capability as a secondary means of obtaining PNT data.(t)
1313.1.10.3.1The MP Radio Set embedded GPS accuracy shall be within 15 meters (95% CEP).(t)
1323.1.10.3.2The MP Radio Set embedded GPS accuracy shall be within 3 meters (95% CEP).(o)
1333.1.10.4The MP Radio Set GPS shall incorporate an embedded M-code GPS capability.(o)
1343.1.10.5The MP Radio Set, when operating waveforms for transmitting Position Location Information (PLI) over IP data, shall use Variable Message Format (VMF) K5.01 IAW the MIL-STD-6017 and MIL-STD-6017A series with VMF header IAW MIL-STD-2045-47001C.(t)
1353.1.10.6The MP Radio Set, when operating compatible waveforms, shall transmit Position Location Information (PLI) over IP data waveforms using Variable Message Format (VMF) K5.01 IAW the MIL-STD-6017E series with VMF header IAW MIL-STD-2045-47001C.(o)
1363.1.10.7The MP Radio Set, when operating compatible waveforms, shall transmit PLI configurable by change in time or distance.(t)
1373.1.10.8Reserved
1383.1.10.9Reserved
1393.1.11Operating Surface Temperature
1403.1.11.1Reserved
1413.1.11.2Reserved
1423.1.11.3Reserved
1433.1.11.4The MP Radio Set, shall not exceed the temperatures exposure limits for prolonged contract or handling and momentary contact IAW MIL-STD-1472H where prolonged contact or handling is defined as continuous physical touching of the radio surface for two seconds or longer and momentary contact is defined as continuous physical touching of the radio surface for less than two seconds. Radio surfaces shall not exceed momentary contact temperature of 60°C and prolonged contact or handling temperature of 49°C under all of the following steady state conditions:(t)
1443.1.11.4a)Ambient temperature of 22 ± 1°C,(t)
1453.1.11.4b)Exposure to 3 mph breeze,(t)
1463.1.11.4c)Radio not in rucksack,(t)
1473.1.11.4d)No solar loading contribution,(t)
1483.1.11.4e)Each of the waveform combinations WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, under battery power with the following maximum receive/transmit loading conditions of:(t)
1493.1.11.41) WREN TSM: 30-second PLI rate and 10% Push-to-Talk (PTT) Voice Transmit duty cycle in a 18 node net with 2 talk groups,(t)
1503.1.11.42) SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(t)
1513.1.11.43) Sufficient transmit power on both channels simultaneously to achieve required ranges.(t)
1523.1.11.5The MP Radio Set, shall not exceed the temperatures exposure limits for prolonged contract or handling and momentary contact IAW MIL-STD-1472H where prolonged contact or handling is defined as continuous physical touching of the radio surface for two seconds or longer and momentary contact is defined as continuous physical touching of the radio surface for less than two seconds. Radio surfaces shall not exceed momentary contact temperature of 60°C and prolonged contact or handling temperature of 49°C under all of the following steady state conditions:(o)
1533.1.11.5a)Ambient temperature of 33 ± 1°C,(o)
1543.1.11.5b)Exposure to 3 mph breeze,(o)
1553.1.11.5c)Radio not in rucksack,(o)
1563.1.11.5d)No solar loading contribution,(o)
1573.1.11.5e)Each of the waveform combinations WREN/WREN, WREN/SINCGARS, and SINCGARS/SINCGARS, under battery power with the following maximum receive/transmit loading conditions of:(o)
1583.1.11.51) WREN TSM: 30-second PLI rate and 10% Push-to-Talk (PTT) Voice Transmit duty cycle in a 18 node net with 2 talk groups,(o)
1593.1.11.52) SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(o)
1603.1.11.53) Sufficient transmit power on both channels simultaneously to achieve required ranges.(o)
1613.1.11.6The MP Radio Set, shall not exceed the temperatures exposure limits for prolonged contract or handling and momentary contact IAW MIL-STD-1472H where prolonged contact or handling is defined as continuous physical touching of the radio surface for two seconds or longer and momentary contact is defined as continuous physical touching of the radio surface for less than two seconds. Radio surfaces shall not exceed momentary contact temperature of 60°C and prolonged contact or handling temperature of 49°C under all of the following steady state conditions:(o)
1623.1.11.6a)Ambient temperature of 22 ± 1°C,(o)
1633.1.11.6b)Exposure to 3 mph breeze,(o)
1643.1.11.6c)Radio not in rucksack,(o)
1653.1.11.6d)No solar loading contribution,(o)
1663.1.11.6e)The waveform combination MUOS/SINCGARS in a 4 node net, under battery power with the following maximum receive/transmit loading conditions of:(o)
1673.1.11.61) MUOS Group: 6:3:1 (listen:receive:transmit) duty cycle,(o)
1683.1.11.62) SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(o)
1693.1.11.63) Sufficient transmit power on both channels simultaneously to achieve required ranges.(o)
1703.1.11.7The MP Radio Set, shall not exceed the temperatures exposure limits for prolonged contract or handling and momentary contact IAW MIL-STD-1472H where prolonged contact or handling is defined as continuous physical touching of the radio surface for two seconds or longer and momentary contact is defined as continuous physical touching of the radio surface for less than two seconds. Radio surfaces shall not exceed momentary contact temperature of 60°C and prolonged contact or handling temperature of 49°C under all of the following steady state conditions:(o)
1713.1.11.7a)Ambient temperature of 33 ± 1°C,(o)
1723.1.11.7b)Exposure to 3 mph breeze,(o)
1733.1.11.7c)Radio not in rucksack,(o)
1743.1.11.7d)No solar loading contribution,(o)
1753.1.11.7e)The waveform combination MUOS/SINCGARS in a 4 node net, under battery power with the following maximum receive/transmit loading conditions of:(o)
1763.1.11.71) MUOS Group: 6:3:1 (listen:receive:transmit) duty cycle,(o)
1773.1.11.72) SINCGARS: 6:3:1 (listen:receive:transmit) duty cycle,(o)
1783.1.11.73) Sufficient transmit power on both channels simultaneously to achieve required ranges.(o)
1793.1.12Reliability
1803.1.12.1The MP Radio Set shall demonstrate with 80% confidence a probability of at least 86% of operating over a 72 hour period without an essential function failure per channel. Essential Function Failures are defined in the United States Army Training and Doctrine Command (TRADOC) certified Failure Definitions and Scoring Criteria (FD/SC).(t)
1813.1.12.2The MP Radio Set shall demonstrate with 80% confidence a Mean Time Between Essential Function Failure (MTBEFF) of no less than 477 hours per channel.(t)
1823.1.13Operational Availability
1833.1.13.1The MP Radio Set shall demonstrate an operational availability of 0.96 per channel.(t)
1843.1.13.2The MP Radio Set shall demonstrate an operational availability of 0.99 per channel.(o)
1853.2Waveform Performance
1863.2.1Counter Radio Controlled Improvised Explosive Devices (RCIED) Electronic Warefare (CREW) Interoperability
1873.2.1.1The MP Radio Set shall be capable of operating in the same vehicle platform with the CREW Duke Family of Systems (FoS) when the MP Radio’s operating frequencies are accounted for (notched out) by the CREW Duke system.(o)
1883.2.2Common Receive/Transmit Characteristics
1893.2.2.1The MP Radio Set shall maintain a spurious response rejection of at least 60 dB for signal bandwidths up to 1.5 MHz and frequency offsets greater than +/- 5% from the carrier.(t)
1903.2.2.2The MP Radio Set shall provide at least 40 dBm (+/- 2 dB) of RF output power measured at the MP Radio RF output port for all frequencies on both channels simultaneously.(t)
1913.2.2.3The MP Radio Set shall provide the ability to increase transmit power by at least 3 dB for mounted operation.(o)
1923.2.2.4The MP Radio Set shall provide the ability to set transmit power levels.(t)
1933.2.2.5The MP Radio Set shall provide networked voice and data exchange (i.e., mission command information) to support timely tactical actions while dispersed across the battlefield.(t)
1943.2.2.6The MP Radio Set shall provide a voice call completion rate of at least 80% in a route and retrans scenario using any combination of two voice waveforms bridged by a MP Radio Set.(t)
1953.2.2.7The MP Radio Set shall provide a voice call completion rate of at least 90% for all voice waveforms.(t)
1963.2.2.8The MP Radio Set transmitted spurious output level shall be attenuated at least 50 dBc below carrier frequency when the operating at maximum power level.(t)
1973.2.2.9The MP Radio Set shall support a transmit duty cycle of at least 40% for at least 5 minutes on both channels when operating simultaneously at power levels necessary to meet required ranges. The MP Radio Set may temporarily exceed the operating surface temperature limits of 3.1.11 when operating under these conditions.(t)
1983.2.3Supported Waveforms
1993.2.3.1The MP Radio Set shall operate the following waveforms:(t)
2003.2.3.1.1Reserved
2013.2.3.1.2Single Channel Ground and Airborne Radio System (SINCGARS) IAW 3.2.6(t)
2023.2.3.1.3UHF SATCOM Military Tactical (MIL-STD-181B, MIL-STD-182A, MIL-STD-183A)2 IAW 3.2.7(t)
2033.2.3.1.4MUOS (MIL-STD-188-187A) IAW 3.2.8(t)
2043.2.3.1.5VHF/UHF Line-of-Sight (LOS) (VULOS) Amplitude Modulation (AM) / Frequency Modulation (FM) (ATC)1 IAW 3.2.11(t)
2053.2.3.1.6Have Quick II (HQII)1 IAW 3.2.10(t)
2063.2.3.1.7UHF SATCOM Integrated Waveform (IW) Phase I IAW 3.2.9.1.(t)
2073.2.3.1.8UHF SATCOM IW Phase II IAW 3.2.9.2.(t)
2083.2.3.1.9Reserved
2093.2.3.1.10UHF AM / FM / Phase Shift Keying (PSK) Military Tactical1 IAW 3.2.13(t)
2103.2.3.1.11VHF FM Military Tactical1 IAW 3.2.14(t)
2113.2.3.1.12High-Frequency (HF) Single Side Band (SSB) with Automatic Link Establishment (ALE) IAW 3.2.12(o)
2123.2.3.1.13Enhanced Position Location Reporting System (EPLRS)(o)
2133.2.3.1.14Mobile Satellite Service(o)
2143.2.3.1.15Cellular Radio & Personal Communication Services (PCS)(o)
2153.2.3.1.16Bowman VHF(o)
2163.2.3.1.17Reserved
2173.2.3.1.18SATURN U.S. Specification ED4 IAW 3.2.15(td)
2183.2.3.1.19WREN TSM IAW 3.2.4(t)
2193.2.3.1.20WREN NB IAW 3.2.4(t)
2203.2.3.1.21SATURN Edition 3 (ED3) IAW 3.2.15(t)
2213.2.3.1.21
2223.2.3.1.21
2233.2.3.1.21VHF/UHF, AM/FM/PSK, ATC, and HQII waveforms may be combined as selectable modes under a single V/U-LOS waveform instantiation.(t)
2243.2.3.1.21o as UHF SATCOM “DAMA” or Military Tactical(t)
2253.2.3.1.21
2263.2.3.2The MP Radio Set shall operate additional Configuration Steering Board approved waveforms not specifically identified in Paragraphs 3.2.3.1.(o)
2273.2.3.3The MP Radio Set shall provide 2 independent channels which operate the following combinations of waveforms included on the radio:(t)
2283.2.3.3.1Reserved
2293.2.3.3.2SINCGARS / SINCGARS(t)
2303.2.3.3.3Reserved
2313.2.3.3.4Reserved
2323.2.3.3.5Reserved
2333.2.3.3.6SINCGARS / MUOS(t)
2343.2.3.3.7VHF AM LOS (ATC) / VHF AM LOS (ATC)(o)
2353.2.3.3.8VHF LOS (ATC) / VHF AM LOS (ATC)(t)
2363.2.3.3.9HQII / HQII(t)
2373.2.3.3.10Reserved
2383.2.3.3.11UHF SATCOM “IW” / HQII(t)
2393.2.3.3.12UHF SATCOM “IW” / SINCGARS(t)
2403.2.3.3.13UHF SATCOM “IW” / VHF/UHF LOS (VULOS) (ATC)(t)
2413.2.3.3.14UHF SATCOM “IW” / VHF AM LOS (ATC)(t)
2423.2.3.3.15VHF FM Military Tactical / VHF FM Military Tactical(t)
2433.2.3.3.16UHF AM/FM PSK Military Tactical / UHF AM/FM PSK Military Tactical(t)
2443.2.3.3.17Reserved
2453.2.3.3.18VHF/UHF LOS (VULOS) (ATC) / VHF FM Military Tactical(t)
2463.2.3.3.19VHF/UHF LOS (VULOS) (ATC) / UHF AM/FM PSK Military Tactical(t)
2473.2.3.3.20VHF AM LOS (ATC) / VHF FM Military Tactical(t)
2483.2.3.3.21VHF AM LOS (ATC) / UHF AM/FM PSK Military Tactical(t)
2493.2.3.3.22UHF AM/FM PSK Military Tactical / VHF FM Military Tactical(t)
2503.2.3.3.23UHF SATCOM “IW” / VHF FM Military Tactical(t)
2513.2.3.3.24UHF SATCOM “IW” / UHF AM/FM PSK Military Tactical(t)
2523.2.3.3.25MUOS / UHF SATCOM “IW”(o)
2533.2.3.3.26MUOS / UHF SATCOM “DAMA”(o)
2543.2.3.3.27SINCGARS / UHF SATCOM “DAMA”(t)
2553.2.3.3.28UHF LOS (ATC) / VHF AM LOS (ATC)(t)
2563.2.3.3.29UHF AM/FM LOS (ATC) / VHF AM/FM LOS (ATC)(t)
2573.2.3.3.30SINCGARS / VHF AM/FM LOS (ATC)(t)
2583.2.3.3.31SINCGARS / UHF AM/FM LOS (ATC)(t)
2593.2.3.3.32UHF SATCOM “DAMA” / VHF AM/FM LOS (ATC)(t)
2603.2.3.3.33UHF SATCOM “DAMA” / UHF AM/FM LOS (ATC)(t)
2613.2.3.3.34MUOS / VHF AM/FM LOS (ATC)(t)
2623.2.3.3.35MUOS / UHF AM/FM LOS (ATC)(t)
2633.2.3.3.36WREN TSM / VHF AM/FM LOS (ATC)(t)
2643.2.3.3.37WREN TSM / UHF AM/FM LOS (ATC)(t)
2653.2.3.3.38WREN TSM / WREN TSM(t)
2663.2.3.3.39WREN TSM / SINCGARS(t)
2673.2.3.3.40WREN TSM / UHF SATCOM “DAMA”(t)
2683.2.3.3.41WREN TSM / MUOS(t)
2693.2.3.3.42WREN TSM / UHF SATCOM “IW”(t)
2703.2.3.3.43Reserved
2713.2.3.3.44WREN TSM / HF SSB w/ALE(o)
2723.2.3.3.45WREN TSM / WREN NB(t)
2733.2.3.3.46WREN NB / VHF AM/FM LOS (ATC)(t)
2743.2.3.3.47WREN NB / UHF AM/FM LOS (ATC)(t)
2753.2.3.3.48WREN NB / WREN NB(t)
2763.2.3.3.49WREN NB / SINCGARS(t)
2773.2.3.3.50WREN NB / UHF SATCOM “DAMA”(t)
2783.2.3.3.51WREN NB / MUOS(t)
2793.2.3.3.52WREN NB / UHF SATCOM “IW”(t)
2803.2.3.3.53Reserved
2813.2.3.3.54WREN NB / HF SSB w/ALE(o)
2823.2.3.3.55HQII / SINCGARS(t)
2833.2.3.3.56U.S. SATURN ED4 / SINCGARS(td)
2843.2.3.3.57U.S. SATURN ED4 / HQII(td)
2853.2.3.3.58U.S. SATURN ED4 / U.S. SATURN ED4(td)
2863.2.3.3.59U.S. SATURN ED4 / UHF SATCOM “IW”(td)
2873.2.3.3.60SATURN ED3 / SINCGARS(t)
2883.2.3.3.61SATURN ED3 / HQII(t)
2893.2.3.3.62SATURN ED3 / SATURN ED3(t)
2903.2.3.3.63SATURN ED3 / UHF SATCOM “IW”(t)
2913.2.3.3.63ands defined in each waveform requirements section below.)(t)
2923.2.3.4The MP Radio Set shall provide 2 independent channels which operate any combination of waveforms included on the radio.(o)
2933.2.3.5The MP Radio Set shall provide internal route and retransmission capabilities as defined by the threshold combinations in Table 3‑1. (Note: The Route and Retransmit (R&R) capability includes two functions at the same security classification level: the route capability enabling information exchange between two different waveforms; and the retransmit capability enabling information exchange between different radio frequencies using the same waveform.) “Internal” R&R will be performed internally within one (1) two-channel R/T.(t)
2943.2.3.5.1Internal Route and Retransmission Characteristics
2953.2.3.5.1.1The MP Radio Set shall allow the operator to initiate voice transmissions from either of the channel’s speaker/microphones, to send voice traffic over both channels simultaneously.(o)
2963.2.3.5.1.2The MP Radio Set shall allow the operator to configure via HMI, the ability to mute or unmute the sound produced on speaker/microphones on: channel 1 only, channel 2 only, or both channels.(o)
2973.2.3.5.1.3Route and retransmission for waveform combinations that support simultaneous voice and data, the MP Radio Set shall allow the operator to configure via HMI: voice only, data only, or both voice and data.(o)
2983.2.3.5.1.3
2993.2.3.6The MP Radio Set shall provide internal route and retransmission capabilities as defined by the delayed threshold combinations in Table 3‑1.(td)
3003.2.3.6Table 3-1 is found on the separate TAB labeled "Table 3-1". Please indicate compliance by waveform combination on that TAB.
3013.2.3.6(td)
3023.2.3.6
3033.2.3.6
3043.2.3.6
3053.2.3.6
3063.2.3.6
3073.2.3.6
3083.2.3.6
3093.2.3.6
3103.2.3.6
3113.2.3.6
3123.2.3.6
3133.2.3.6
3143.2.3.6ed Data1,6(td)
3153.2.3.6ed Data1,6(td)
3163.2.3.6tched Data1,2(td)
3173.2.3.6tched Data1,2(td)
3183.2.3.6
3193.2.3.6d Data1(td)
3203.2.3.6d Data1(td)
3213.2.3.6
3223.2.3.6
3233.2.3.6ice(td)
3243.2.3.6e(td)
3253.2.3.6
3263.2.3.6
3273.2.3.63, Td = U.S. ED4)(td)
3283.2.3.6
3293.2.3.6, Td = U.S. ED4)(td)
3303.2.3.6
3313.2.3.6(ATC) Voice(td)
3323.2.3.6ce(td)
3333.2.3.6ical Voice(td)
3343.2.3.6ry Voice(td)
3353.2.3.6
3363.2.3.6
3373.2.3.6
3383.2.3.6
3393.2.3.6d Td = Delayed Threshold O = Objective To = Objective Threshold R = Reserved(td)
3403.2.3.6ansmission both channels of the MP Radio shall be at the same security level (i.e., CUI to CUI, SAB to SAB)(td)
3413.2.3.6net Switched Data to WREN TSM Ethernet Switched Data, limited to multicast traffic.(td)
3423.2.3.6ticast traffic.(td)
3433.2.3.6cludes both F1/F2 (different NET IDs) and F1/F1 (same NET IDs), internal redside routing. See Table 7-1, items 32 and 33.(td)
3443.2.3.6ansmission between WREN CUI Voice and SINCGARS Voice PT modes, platform shall only allow configuration between WREN CUI and applicable SINCGARS PT/FHx modes. Platform shall not allow user configuration of WREN CUI and SINCGARS PT/SC.(td)
3453.2.3.6outed Data, when in Transit sub-mode, Route and Retransmission is supported between Transit to Edge or Transit to Transit, where the waveform in Edge mode can be either TSM or NB.(td)
3463.2.3.7Objective Route and Retransmission Capabilities. “External” R&R will utilize external device(s) (e.g., legacy SINCGARS F1/F2 retransmission audio cable for voice; router, etc. for data) to perform routing or retransmission of data or voice between any two (2) channels on two (2) separate two-channel R/Ts).
3473.2.3.7.1The MP Radio Set shall provide external retransmission capabilities between SINCGARS voice / SINCGARS voice.(o)
3483.2.3.7.2The MP Radio Set shall provide external routing capabilities between SINCGARS voice / WREN voice.(o)
3493.2.3.7.3Reserved
3503.2.3.7.4The MP Radio Set shall provide external routing capabilities between SINCGARS Voice / MUOS Voice.(o)
3513.2.3.7.5The MP Radio Set shall provide external retransmission capabilities between WREN voice / WREN voice.(o)
3523.2.3.7.6The MP Radio Set shall provide external routing capabilities between WREN voice / SATCOM DAMA voice.(o)
3533.2.3.7.7The MP Radio Set shall provide external routing capabilities between WREN voice / SATCOM IW voice.(o)
3543.2.3.7.8The MP Radio Set shall provide external routing capabilities between WREN voice / MUOS voice.(o)
3553.2.3.7.9Reserved
3563.2.3.7.10Reserved
3573.2.3.7.11Reserved
3583.2.3.7.12The MP Radio Set shall provide external retransmission capabilities between SINCGARS Data / SINCGARS Data.(o)
3593.2.3.7.13The MP Radio Set shall provide external routing capabilities between SINCGARS Data / MUOS Data.(o)
3603.2.3.7.14The MP Radio Set shall provide external retransmission capabilities between WREN IP data / WREN IP data.(o)
3613.2.3.7.15The MP Radio Set shall provide external routing capabilities between WREN IP data / MUOS IP data.(o)
3623.2.3.7.16Reserved
3633.2.3.7.17Reserved
3643.2.3.7.18Reserved
3653.2.3.7.19Reserved
3663.2.3.7.20The MP Radio Set, when configured with WREN TSM on one channel and MUOS on the other channel shall take multicast packets from the WREN TSM channel and send them to a pre-configured address through the MUOS channel using a point to net MUOS service.(o)
3673.2.3.7.21The MP Radio Set, when configured with WREN TSM on one channel and MUOS on the other channel shall take packets received on MUOS from a pre-configured address and send to the WREN TSM channel as standard multicast packets.(o)
3683.2.4WREN Requirements
3693.2.4.1WREN TSM Operating Bandwidths
3703.2.4.1.1The MP Radio Set shall operate WREN TSM with 1.2 MHz channel bandwidth.(t)
3713.2.4.1.2The MP Radio Set shall operate WREN TSM with 3.6 MHz channel bandwidth.(t)
3723.2.4.1.3The MP Radio Set shall operate WREN TSM with 10 MHz channel bandwidth.(o)
3733.2.4.1.4The MP Radio Set shall operate WREN TSM with 20 MHz channel bandwidth.(o)
3743.2.4.1.5The MP Radio Set shall operate WREN TSM with 40 MHz channel bandwidth. This mode shall be supported in frequency bands of operation at or above 450 MHz.(o)
3753.2.4.2WREN TSM Operating Frequency Range
3763.2.4.2.1The MP Radio Set shall operate WREN TSM for threshold bandwidths in frequency range:(t)
3773.2.4.2.11) 225-450 MHz(t)
3783.2.4.2.12) 1325-1450 MHz(t)
3793.2.4.2.13) 1755-1850 MHz(t)
3803.2.4.2.2Reserved
3813.2.4.3WREN TSM Security
3823.2.4.3.1The MP Radio Set, when operating WREN, shall interoperate with other TSM networks running compatible versions of TSM for Controlled Unclassified Information (CUI) voice and data.(t)
3833.2.4.3.2The MP Radio Set, when operating WREN, shall interoperate with other TSM networks running compatible versions of TSM for Secret And Below (SAB) voice and data, IAW the C5ISR WREN INFOSEC Design Document.(t)
3843.2.4.3.3The MP Radio Set, when operating WREN, shall interoperate with other TSM networks running compatible versions of TSM for Top Secret (TS) voice and data.(o)
3853.2.4.3.4The MP Radio Set, when operating WREN shall support “Black” relay of TSM traffic at CUI and SAB levels.(t)
3863.2.4.3.5The MP Radio Set, when operating WREN shall support “Black” relay of TSM traffic at TS level.(o)
3873.2.4.3.6The MP Radio Set, when operating WREN shall support Multiple Independent Levels of Security (MILS). MILS is a traffic processing environment with high enough assurance to attain approval to operate mixed security domains simultaneously, on the same WREN network and on the same radio platform, up to Secret. WREN shall support MILS IAW the C5ISR WREN OTA Specification Volume I: Layer 3 Networking & Services.(t)
3883.2.4.3.6.1The MP Radio Set, when operating MILS on WREN shall support simultaneous SAB data and CUI data on each channel.(t)
3893.2.4.3.6.2The MP Radio Set, when operating MILS on WREN shall support SAB voice or CUI voice on each channel.(t)
3903.2.4.3.7The MP Radio Set, when operating WREN shall support Multiple Independent Levels of Security (MILS). MILS is a traffic processing environment with high enough assurance to attain approval to operate mixed security domains simultaneously, on the same WREN network and on the same radio platform, up to Top Secret. WREN shall support MILS IAW the C5ISR WREN OTA Specification Volume I: Layer 3 Networking & Services.(o)
3913.2.4.3.8The MP Radio Set, when configured for SAB and operating WREN TSM, shall support monitoring of CUI voice of the respective voice group, when CUI voice has been provisioned and is present on the respective voice group. Shall provide user configurability to turn this feature on/off.(o)
3923.2.4.3.9The MP Radio Set, when operating WREN in SAB, shall support the ability to use any available WREN Traffic Encryption Key (TEK) that is loaded on the MP Radio Set, such that it doesn’t have to be referenced from the mission plan or restrict the user to what is in the mission plan.(o)
3933.2.4.3.10The MP Radio Set, when operating WREN, shall support the ability to import custom certificates for WREN blackside web application management.(o)
3943.2.4.4WREN TSM Operating Characteristics
3953.2.4.4.1The MP Radio Set, when operating WREN TSM, shall support user configurable 0 through 32 independent digital voice channels. The setting shall be configurable in step sizes of 1.(t)
3963.2.4.4.2The MP Radio Set, when operating WREN TSM, shall provide unicast data throughput of up to 500 kbps for 1 hop while using 1.2 MHz of bandwidth when the RF level at the receiver is at least −96 dBm and when configured for zero voice channels.(t)
3973.2.4.4.3The MP Radio Set, when operating WREN TSM, shall provide multicast data throughput of up to 100 kbps for up to 8 hops while using 1.2 MHz of bandwidth when the RF level at the receiver is at least −96 dBm and when configured for zero voice channels.(t)
3983.2.4.4.4The MP Radio Set, when operating WREN TSM, shall provide unicast data throughput of up to 1 Mbps for 1 hop while using 3.6 MHz of bandwidth when the RF level at the receiver is at least −96 dBm and when configured for zero voice channels.(t)
3993.2.4.4.5The MP Radio Set, when operating WREN TSM, shall provide multicast data throughput of up to 250 kbps for up to 8 hops while using 3.6 MHz of bandwidth when the RF level at the receiver is at least −96 dBm and when configured for zero voice channels.(t)
4003.2.4.4.6The MP Radio Set, when operating WREN TSM, shall support network merge time of less than 15 seconds between two networks of 60 nodes with clear line-of-sight voice and data exchanges. (Note: Network merge is defined as ability to pass voice and PLI traffic.)(t)
4013.2.4.4.7The MP Radio Set, when operating WREN TSM, shall join an existing network in less than 5 seconds. (Note: Join is defined as ability to pass voice and PLI traffic.)(t)
4023.2.4.4.8The MP Radio Set, when operating WREN TSM, shall undergo an interoperability and conformance assessment, at the WREN Reference Implementation laboratory with Product Manager (PdM) Waveforms oversight (Appointed by DoD Chief Information Officer (CIO) as Lead Service for WREN and TSM waveforms), IAW C5ISR WREN TSM OTA Specifications.(t)
4033.2.4.4.9The MP Radio Set, when operating WREN TSM, shall support Layer 3 Networking and Services, IAW the C5ISR WREN OTA Specification Volume I: Layer 3 Networking & Services. The Layer 3 Networking and Services mode of operation shall be supported in CUI and SAB configurations.(t)
4043.2.4.4.10The MP Radio Set, when operating WREN TSM, shall interoperate with other WREN TSM networks running Layer 3 Networking and Services, IAW the C5ISR WREN OTA Specification Volume I: Layer 3 Networking & Services.(t)
4053.2.4.4.11The MP Radio Set, when operating WREN TSM, shall support Emissions Control (EMCON), IAW the C5ISR WREN OTA Specifications.(t)
4063.2.4.4.11
4073.2.4.5WREN TSM Receive Sensitivity
4083.2.4.5.1The MP Radio Set, when operating WREN TSM using 1.2 MHz of bandwidth, shall have a receive sensitivity of at least -100 dBm with 1% packet loss assuming 520 bytes per packet at a rate of 5 packets per second.(t)
4093.2.4.5.2The MP Radio Set, when operating WREN TSM using 3.6 MHz of bandwidth, shall have a receive sensitivity of at least -97 dBm with 1% packet loss assuming 520 bytes per packet at a rate of 5 packets per second.(t)
4103.2.4.6WREN TSM PLI Completion
4113.2.4.6.1The MP Radio Set, when operating WREN TSM, shall provide a PLI message completion rate of at least 90% in a 120 node network of TSM radios in 5 minutes of monitoring.(t)
4123.2.4.6.2An external message gateway using a single MP radio using a valid route and retransmission WREN to WREN configuration, with each channel operating in a different 60 node WREN TSM network, shall not further degrade the traffic received. The offered load received from the first 60 node network on channel 1 of the MP radio, shall be route and retransmitted to the second 60 node network on channel 2 of the MP radio, the resulting offered load being route and retransmitted (from channel 1 to channel 2), shall result in at least an 80% message completion rate in 5 minutes of monitoring. The performance from channel 2 to channel 1 shall be symmetrical. The network capacity on channel 1 and channel 2 shall be symmetrical.(t)
4133.2.4.7WREN TSM Transmission Range
4143.2.4.7.1The MP Radio Set, when operating WREN TSM in a Mounted / TOC configuration, shall provide transmission ranges of at least 10 km, point-to-point, RF Line-of-Sight as defined in Appendix C provided a 4 meter antenna placement above flat open terrain.(t)
4153.2.4.7.2The MP Radio Set, when operating WREN TSM in a Mounted / TOC configuration, shall provide transmission ranges of at least 40 km, point-to-point, RF Line-of-Sight as defined in Appendix C provided any obstruction, including terrain, no greater than 40% across the radius at any point along the ellipsoid as shown in Appendix C, with a 4 meter antenna height.(o)
4163.2.4.7.3The MP Radio Set, when operating WREN TSM in a Dismounted configuration, shall provide transmission ranges of at least 3 km, point-to-point, RF Line-of-Sight as defined in Appendix C provided a 2 meter antenna placement above flat open terrain.(t)
4173.2.4.7.4The MP Radio Set, when operating WREN TSM in a Dismounted configuration, shall provide point to point transmission ranges of at least 10 km, RF Line-of-Sight as defined in Appendix C provided a 2 meter antenna placement above flat open terrain.(o)

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .