T3030 Optional Pre-Quote Conference 1.29.26.pptx

PPTX presentation 2 MB Posted

Attached to
T3030 - Equipment Master Lease Purchasing Financing Facility
Solicitation number
25DPP01105
Issued by
New Jersey

About this file

This document is an optional pre-quote conference presentation for the State of New Jersey's T3030 Equipment Master Lease Purchasing Financing Facility (Bid Solicitation 25DPP01105). The conference addresses procedural questions regarding bid submission requirements, with questions limited to administrative matters rather than scope of work details. Substantive questions about services or products must be submitted electronically through the Q&A tab in NJSTART. The deadline for submitting questions is 2:00 p.m. on February 19, 2026, and quotes are due by 2:00 p.m. on March 17, 2026. Bidders proposing changes to the State Master Equipment Lease Purchase Agreement must submit redlined edits with explanatory comments to T3030EquipmentMasterLease@treas.nj.gov during the Q&A period; any changes proposed in the quote that were not previously submitted during Q&A will result in the quote being deemed non-responsive.

Pricing submissions must complete the State-Supplied Price Sheet in its entirety without modifications, formatting changes, or blank lines. Bidders must quote interest rates as percentages relative to the SOFR Swap Rate (rounded to four decimal places) based on the applicable 3-year, 4-year, or 5-year Bloomberg SOFR Curve (ICVS 490), which the State will post seven to ten business days before the quote opening date. All fees and expenses of the lessor must be included within the quoted interest rates. Bidders should disclose their internal policies regarding financing soft costs such as software, hardware maintenance, programming, design, and training. Mandatory requirements are designated as "shall" and include the Ownership Disclosure Form, Affirmative Action certification, and Business Registration; failure to submit these required documents may result in non-responsive quotes. The presentation emphasizes strict compliance with submission procedures and warns against including additional language, assumptions, or conditions in quotes that could render them non-responsive.

View the file

Other files

File Type Posted
T3030 Appendix 8 - January 2 2025 Executed Master Equipment Lease Purchase Agreement.pdf PDF
T3030 Bid Amendment 4 - Revised Quote Submission Due Date _4.15.26.docx DOCX document
T3030 Revised 490 SOFR Curve 6.2.26.docx DOCX document
T3030 Appendix 1 - Master Equipment Lease Purchase Agreement.1.29.26.docx DOCX document
T3030 Bid Amendment 3 - Revised Quote Submission Due Date _3.31.26.docx DOCX document
T3030 Appendix 5 Form 8038-GC and Form 8038-G Revised as of 10.2021 1.29.26.pdf PDF
490 SOFR Curve 5.18.26.png PNG image
T3030 Revised Attachment 1 - Terms and Conditions for T3030 Equipment Master Lease 5.18.26.docx DOCX document
T3030 Appendix 7 LOC 9 Weekly Payment Amounts 1.29.26.pdf PDF
T3030 Appendix 6 490 SOFR Curve Bloomberg Service SAMPLE 1.29.26.pdf PDF
T3030 Bid Amendment 1 - Revised Quote Submission Due Date _3.6.26.docx DOCX document
T3030 Bid Amendment 5 Answers to Questions and Revised Quote Opening 5.18.26.docx DOCX document
T3030 Attachment 2 - Standard Procurement Forms Packet 1.29.26~1.pdf PDF
T3030 Bid Amendment 2 - Revised Quote Submission Due Date _3.18.26.docx DOCX document
T3030 Revised Appendix 1 - Master Equipment Lease Pruchase Agreement 5.18.26.docx DOCX document
T3030 State-Supplied Price Sheet 1.29.26~1.xlsx XLSX spreadsheet
T3030 Appendix 2 Equipment Master Lease Payment Process-Flow Chart 1.29.26.pdf PDF
T3030 Revised Bid Solicitation 5.18.26~1.docx DOCX document
T3030 Bid Solicitation 1.29.26~3.docx DOCX document
T3030 Appendix 3 Payment Price Sheet LOC 11 1.29.26.pdf PDF
T3030 Attachment 1 - Terms and Conditions for T3030 Equipment Master Lease 1.29.26.docx DOCX document
T3030 Appendix 4 Weekly Payment Schedule For LOC 11 1.29.26.pdf PDF
T3030 Bid Amendment 7 6.2.26.docx DOCX document
Show all 23

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Optional Pre-Quote Conference T3030 Equipment Master Lease Purchasing Financing Facility

25DPP01105

Q&a due by 2pm February 19, 2026 Quotes due by 2pm date March 17, 2026

WELCOME & INTRODUCTIONS

Please sign in by entering your name, company, and email in the Microsoft Teams chat window.

A list of attendees and these slides will be posted to NJSTART.

Please note this conference is being recorded.

Please identify yourself and the firm you represent prior to asking a question.

Please make sure you are registered in NJSTART, and that your contact information remains current.

NJSTART Vendor email support: njstart@treas.nj.gov NJSTART Vendor phone support – (609) 341-3500 Staffed Monday to Friday 8:30 a.m. to 4:30 p.m.

https://www.state.nj.us/treasury/purchase/vendor.shtml

PURPOSE & GENERAL INFORMATION

The purpose of this conference is to address procedural questions only regarding the Bid Solicitation and Quote submission requirements.

No questions relating to the Scope of Work or the services or products required in the Bid Solicitation will be addressed. Vendors should utilize the Q&A Tab of the Bid Solicitation in NJSTART to submit those questions electronically.

The Bid Solicitation will be reviewed section by section with procedural questions being entertained on that basis.

BID SOLICITATION AT A GLANCE

Cover page: Submission dates and set-aside requirements (not applicable) Section 1: Introduction and Summary of the Bid Solicitation Section 2: Pre-Quote Submission Information e-Q&A, exceptions to the SSTC, Bid Amendments) Section 3: Quote Submission Requirements (forms, technical response, State-Supplied Price Sheet Instructions) Section 4: Scope of Work

BID SOLICITATION AT A GLANCE

Section 5: General Contract Terms Section 6: Data Security Requirements Section 7: Modifications to the State of New Jersey Standard Terms and Conditions (SSTC) Section 8: Quote Evaluation and Award Section 9: Glossary Attachment 1: Terms and Conditions for T3030 Equipment Master Lease

SECTION 2.1 QUESTION AND ANSWER PERIOD – GENERAL QUESTIONS

The Division will only accept questions electronically through the Q&A tab in NJSTART.

Questions should be asked in consecutive order, from beginning to end, following the organization of the Bid Solicitation and if applicable, the Master Equipment Lease Purchase Agreement.

SECTION 2.1 QUESTION AND ANSWER PERIOD – MASTER LEASE

Bidders should review Appendix 1 – State Master Equipment Lease Purchase Agreement, including all of its exhibits and MUST provide proposed changes during the Q&A period to email: T3030EquipmentMasterLease@treas.nj.gov.

Proposed edits to the State Master Equipment Lease Purchase Agreement must be submitted in REDLINE on the draft State Master Equipment Lease Purchase Agreement. Any explanation regarding the proposed change should be provided in a comment bubble.

Acceptance or rejection of the proposed edits to the Master Equipment Lease Purchase Agreement is at the sole discretion of the Office of Public Finance.

If a Bidder proposes a change to the State Master Equipment Lease Purchase Agreement in its Quote that was not proposed during the Q&A period, the change will not be accepted, and the Quote may be deemed non-responsive.

Please note: ONLY changes to the Master Equipment Lease Purchase Agreement will be accepted via email. ALL OTHER QUESTIONS MUST BE SUBMITTED ON THE Q&A TAB IN NJSTART.

Section 3: Quote Submission Requirements 3.13.1- Offer and Acceptance – SHOULD

3.13.2 – Ownership Disclosure Form - SHALL (MUST)

3.13.3 – Disclosure of Investment Activities in Iran Form – SHOULD

3.13.4 – Disclosure of Investigations and Other Actions Involving Bidder Form – SHOULD

3.13.5 – Macbride Principles Form – SHOULD

3.13.7 – Confidentiality/Commitment To Defend – SHOULD

3.13.10 – Affirmative Action – SHALL (MUST)

3.13.13 – Business Registration – SHALL (MUST)

3.13.14 – Certification of Non-Involvement in Prohibited Activities Russia or Belarus - SHOULD

Section 3.26 PRICE SHEET INSTRUCTIONS Any fees or expenses of the Lessor shall be included within the interest rates on the State-Supplied Price Sheet for price line numbers 1 through 3. Refer to Sections 4.4 Interest Rate and 4.8 Payment by the State to the Lessor, when completing these price lines.

Seven (7) to ten (10) business days before the Quote Opening Date via Bid Amendment in NJSTART, the State will post a screenshot of the 490 SOFR Curve on the Bloomberg Service. The shortcut code to reach this 490 SOFR Curve is “ICVS 490”. This reference is provided so all Bidders are utilizing the same SOFR Swap Rate when preparing a price quote. Please see Appendix 6 of the Master Lease - 490 SOFR Curve (SAMPLE).

The Bidder must insert the percentage of the appropriate SOFR Swap Rate as a firm fixed price in all price lines on the State-Supplied Price Sheet. This may be done as either a discount or premium to the SOFR Swap Index. The Bidder should make certain that the financing rate is presented as a percentage of the appropriate SOFR Swap Rate and not as an interest rate. Bidders may also submit a spread on the price line provided. The spread should be presented in basis points (bp).

For each interest rate quote provided in the preparation of a price quote, the Bidder must refer to the corresponding bid SOFR Swap Rate as referenced on the 490 SOFR Curve swap rate on Bloomberg Service ICVS 490. That is, the interest rate quote referenced to for the 3-year term must be based off the 3-year bid SOFR Swap Rate; the interest rate quote referenced to for the 4-year term must be based off the 4-year bid SOFR Swap Rate; and the interest rate quote referenced to for the 5-year term must be based off the 5-year bid SOFR Swap Rate. Please round all percentages to four (4) decimal places.

Bidders should disclose their internal policies, including any restrictions, regarding financing Soft Costs. (See Section 4.12 of the Bid Solicitation and State-Supplied Price Sheet). Soft Costs are items such as software/hardware maintenance, programming, design and training, that are usually small additions to the price of the Equipment.

PRICE SHEET PITFALLS

Complete all required price lines on the State-Supplied Price Sheet pursuant to the Bid Solicitation instructions or Quote may be deemed non-responsive. Indicate “no charge” if the cost is $0. Do not leave any price line blank.

The State-Supplied Price Sheet must be completed in its entirety with no lines added or removed, or include additional language, assumptions or fees.

Do not make formatting changes to the State-Supplied Price Sheet. If the price line requires a dollar amount, don’t change it to a percentage, or vice versa. If the price line includes 4 decimal places, don’t change the settings to allow 5 decimals.

Confirm that you have completed all tabs on the State-Supplied Price Sheet.

Confirm you have completed the proper version of the State-Supplied Price Sheet; it may have been revised via Bid Amendment.

Submitting a State-Supplied Price Sheet in a format other than the supplied Excel document can lead to a price sheet being deemed non-responsive when the information in a cell cannot be confirmed by the Bureau.

HELPFUL TIPS & REMINDERS

Review Bid Solicitation in its entirety and submit any questions prior to the deadline including exceptions to the Terms and Conditions for T3030 Equipment Master Lease. Updated documents will be posted in NJSTART and should be reviewed as posted.

Submit Quotes on time addressing all mandatory requirements (designated by “shall”) including forms. Quotes missing mandatory requirements may be deemed non-responsive. Not submitting requested information (“should”) may impact the technical evaluation score.

Be advised that this is NOT a Waiver or Delegated Purchasing Authority (“DPA”) procurement. The Quote may not be emailed, faxed, or hand-delivered. The Quote may only be submitted through NJSTART.

Do not select “No Bid” on the NJSTART “General Tab” unless you are not intending to submit a bid. Your bid will not appear in the Bid Tab if this option is selected.

OTHER HELPFUL TIPS

Examples of additional language that may result in the quote being deemed non-responsive:

Vendor accepts all terms and conditions of this Bid Solicitation with the following additional language: Section X - Agree, as it applies to changes that impact administrative fees as outlined in this provision, provided that Vendor reserves the right to modify Contracted Terms based on changes by the State.

Vendor’s Quote is only valid for XX days.

Vendor reserves the right to charge additional fees for services that require extensive time and effort.

This Quote is a nonbinding expression of interest only and is not intended to create a binding commitment on either party unless and until a definitive agreement has been executed between the parties.

This Quote may include statements regarding plans for future products and services, or future versions of existing products and services. Any such statements are provided solely for your general information and are not part of this Quote unless specifically stated in writing in this Quote.

THANK YOU FOR ATTENDING

Q&A due by 2pm February 19, 2026

Quotes due by 2pm March 17, 2026 image6.tmp image7.png image8.png image9.png image2.png image3.png image4.png image5.png

File details come from the government source that posted it. Updated .