T0121 25DPP01157 Revised State-Supplied Price Sheet 6.19.2025.xlsx

26 KB Posted

Attached to
T0121 - Breakaway U-Post Sign Supports - Statewide
Solicitation number
25DPP01157
Issued by
New Jersey

About this file

Written by GovTribe AI ·

This is a State-Supplied Price Sheet from the New Jersey Department of the Treasury's Division of Purchase and Property for Breakaway U-Post Sign Supports, issued under Bid Solicitation Number 25DPP01157. The procurement is structured into three groups: Group 1 covers steel U-posts and sign posts, Group 2 involves omnidirectional breakaway brackets and hardware, and Group 3 includes upright beam posts for highway signs. The bid is scheduled for quote opening on June 10, 2025, at 2:00 PM Eastern Time, with electronic questions accepted until May 15, 2025. The contract will have a base term of four years with potential extensions up to three additional years, serving the New Jersey Department of Transportation (NJDOT) and Statewide Using Agencies.

Bidders must submit firm, fixed-price unit pricing for all line items within their selected group(s), with mandatory compliance to material standards such as ASTM A1075, ASTM A499, and ASTM A1011. The procurement is not designated as a small business or disabled veteran-owned business set-aside, allowing broad participation from qualified vendors. Contractors must maintain appropriate insurance coverage with minimum liability limits of $1,000,000 and submit comprehensive documentation, including the Bidder Data Form, Ownership Disclosure Form, Disclosure of Investment Activities in Iran Form, and Specification Conformance Certification. The state intends to make one contract award per group, with evaluation based on the sum of unit prices for each group, potentially supporting significant infrastructure support and replacement across New Jersey's transportation network.

View the file

Other files

File Type Posted
T0121 25DPP01157 Revised Bid Solicitation 6.19.2025.docx DOCX document
T0121 25DPP01157 Attachment 3 Bidder Data Form.pdf PDF
T0121 Attachment 5 NJDOT Sketches.pdf PDF
T0121 25DPP01157 State-Supplied Price Sheet.xlsx XLSX spreadsheet
T0121 Bid Amendment 1~3.docx DOCX document
T0121 25DPP01157 Attachment 2 Standard Procurement Forms Packet~1.pdf PDF
T0121 ATTACHMENT 4 Specification Conformance Form 4.10.25.docx DOCX document
T0121 25DPP01157 Bid Solicitation.docx DOCX document
T0121 25DPP01157 Revised Bid Solicitation 5.23.2025.docx DOCX document
Revised Attachment 1 Combined State of New Jersey Standard Terms and Conditions 6.3.2025.pdf PDF
Attachment 5 -NJDOT Sketches Revised 6.19.2025.pdf PDF
T0121 Bid Amendment 2 QA Final 6.23.2025.docx DOCX document
T0121 25DPP01157 Attachment 1 State of New Jersey Standard Terms and Conditions.pdf PDF
Show all 13

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Sheet1 State of New Jersey

DEPARTMENT OF THE TREASURY

DIVISION OF PURCHASE AND PROPERTY

PROCUREMENT BUREAU

33 WEST STATE STREET

P. O. BOX 230

TRENTON, NEW JERSEY 08625-0230

STATE-SUPPLIED PRICE SHEET
BID SOLICITATION NUMBER:25DPP01157
BID SOLICITATION TITLE:T0121 Breakaway U-Post Sign Supports - Statewide
Date: 6/19/2025 REVISED
Bidders Name:
Cash Discount for Expedited Payment (Refer to Bid Solicitation Section 3.36.2):
Price Line NumberItem DescriptionQty.Unit of MeasureUnit PriceManufacturer/ Supplier Name
(Required)Product Name or Model Number
(Required)Delivery Days After Receipt of Order
GROUP 1 (Price Lines 1 and 2)
Group 1 - Price Lines 1 through 31
1U-POST SIGN/STEEL, SIZE 6 FT., TYPE 1- 1.12 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
2U-POST SIGN/STEEL, SIZE 6 FT., TYPE 1- 2.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
3U-POST SIGN/STEEL, SIZE 3.5 FT., TYPE 1- 2.50 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
4U-POST SIGN/STEEL, SIZE 6 FT., TYPE 1- 2.50 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
5U-POST SIGN/STEEL, SIZE 8 FT., TYPE 1- 2.50 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
6U-POST SIGN/STEEL, SIZE 10 FT., TYPE 1- 2.50 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
7U-POST SIGN/STEEL, SIZE 12 FT., TYPE 1- 2.50 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
8U-POST SIGN/STEEL, SIZE 14 FT., TYPE 1- 2.50 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
9U-POST SIGN/STEEL, SIZE 3.5 FT., TYPE 1- 4.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
10U-POST SIGN/STEEL, SIZE 6 FT., TYPE 1- 4.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
11U-POST SIGN/STEEL, SIZE 8 FT., TYPE 1- 4.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
12U-POST SIGN/STEEL, SIZE 10 FT., TYPE 1- 4.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
13U-POST SIGN/STEEL, SIZE 12 FT., TYPE 1- 4.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
14U-POST SIGN/STEEL, SIZE 14 FT., TYPE 1- 4.00 LB./FT. GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
15SQUARE SIGN POST, LENGTH 10 FT., SIZE 2.00 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
16SQUARE SIGN POST, LENGTH 10 FT., SIZE 2.25 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
17SQUARE SIGN POST, LENGTH 12 FT., SIZE 2.00 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
18SQUARE SIGN POST, LENGTH 12 FT., SIZE 2.25 INCHES, AS PER BID SOLICITATION SECTION 4.2.1.1EACH
19SQUARE SIGN POST, LENGTH 14 FT., SIZE 2.00 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
20SQUARE SIGN POST, LENGTH 14 FT., SIZE 2.25 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
21ANCHOR POST LENGTH 3 FT., SIZE 2.25 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
22ANCHOR POST LENGTH 3 FT., SIZE 2.50 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
23SPLICE SLEEVE LENGTH 18 INCHES, SIZE 1.75 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
24SPLICE SLEEVE LENGTH 18 INCHES, SIZE 2.00 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
25ANCHOR SLEEVE LENGTH 18 INCHES, SIZE 2.50 INCHES, THICKNESS 0.1046 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
26ANCHOR SLEEVE LENGTH 18 INCHES, SIZE 3.00 INCHES, THICKNESS 0.1875 INCHES, GALV., AS PER BID SOLICITATION SECTION 4.2.1.1EACH
27SOIL ANCHOR PLATE/11 GAUGE STEEL, TYPE 1, GALV., AS PER BID SOLICITATION SECTION 4.2.2.1EACH
28BREAKAWAY SIGN SUPPORT SYSTEM/STEEL, TYPE 1, INCLUDES SPACER BAR, ALL HARDWARE, ALL FASTENERS, AS PER BID SOLICITATION SECTION 4.2.31EACH
29BREAKAWAY SIGN SUPPORT SYSTEM/STEEL, TYPE 1, EXCLUDING SPACER BAR, INCLUDES ALL HARDWARE, ALL FASTENERS, AS PER BID SOLICITATION SECTION 4.2.31EACH
305/16 INCH CORNER BOLT AND NUT – 18 UNC, AS PER BID SOLICITATION SECTION 4.2.3.1EACH
313/8 INCH CORNER ANCHOR BOLT AND NUT – 16 UNC, AS PER BID SOLICITATION SECTION 4.2.3.1EACH
Group 2 - Price Lines 32 through 38
Price Line NumberItem DescriptionQty.UnitUnit PriceManufacturer/ Supplier Name
(Required)Product Name or Model Number
(Required)Delivery Days After Receipt of Order
32OMNI DIRECTIONAL BREAKAWAY BRACKETS WITH HINGE ASSEMBLY, TRANSPO MODEL B525 OR APPROVED EQUAL. 6061 - T6 ALUMINUM, AS PER BID SOLICITATION SECTION 4.3.1.1EACH
33OMNI DIRECTIONAL BREAKAWAY BRACKETS WITH HINGE ASSEMBLY, TRANSPO MODEL B650 OR APPROVED EQUAL. 6061 - T6 ALUMINUM, AS PER BID SOLICITATION SECTION 4.3.1.1EACH
34BRACKET COUPLING & SPECIAL ASSEMBLY TYPE B, TRANSPO MODEL B525 OR APPROVED EQUAL. INCLUDES SPECIAL BOLT ASTM 449 1-8UNC HOT DIPPED GALVANIZED; SPECIAL COUPLING 1"-8 UNC LP. AMS 6378D HOT DIPPED GALVANIZED; 14 GA. X 1" HORSESHOE SHIM 18 GA. X 1" HORSESHOE SHIM, AS PER BID SOLICITATION SECTION 4.3.1.1EACH
35ANCHOR ASSEMBLY, TYPE B 1"-8UNC 304 STAINLESS STEEL FERNULE, AISC ROD 1045, TRANSPO MODEL B525 OR APPROVED EQUAL, AS PER BID SOLICITATION SECTION 4.3.1.1EACH
36HINGE ASSEMBLY TYPE B525 INCLUDES HINGE PLATE AISI 4130 STEEL, ASTM 123 - HOT DIPPED GALVANIZED PACKAGE OF FOUR (4) , AS PER BID SOLICITATION SECTION 4.3.1.1EACH
37HINGE ASSEMBLY TYPE B650 INCLUDES HINGE PLATE AISI 4130 STEEL, ASTM 123 - HOT DIPPED GALVANIZED PACKAGE OF FOUR (4) , AS PER BID SOLICITATION SECTION 4.3.1.1EACH
38HINGE ASSEMBLY HARDWARE - TYPE B INCLUDES THE FOLLOWING 8 PCS. BOLT 3/4"-10 X 2 1/4" A325 HOT DIPPED GALVANIZED 8 PCS. LOCKWASHER 3/4" B18-21-1" HOT DIPPED GALVANIZED 8 PCS. NUT 3/4"-10 UNC HEAVY HEX GRADE DH ALL MATERIAL ASTM A153 FITS BOTH B525 AND B650 HINGE ASSEMBLY, AS PER BID SOLICITATION SECTION 4.3.1.1EACH
Group 3 - Price Lines 39 through 58
Price Line NumberItem DescriptionQty.UnitUnit Price per Linear FootManufacturer/ Supplier Name
(Required)Product Name or Model Number
(Required)Delivery Days After Receipt of Order
39HOT ROLLED STEEL BEAM W 6 X 12.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED A123, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
40HOT ROLLED STEEL BEAM W 6 X 12.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED A123, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
41HOT ROLLED STEEL BEAM W 6 X 16.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
42HOT ROLLED STEEL BEAM W 6 X 16.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
43HOT ROLLED STEEL BEAM W 8 X 18.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
44HOT ROLLED STEEL BEAM W 8 X 18.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
45HOT ROLLED STEEL BEAM W 8 X 21.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
46HOT ROLLED STEEL BEAM W 8 X 21.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
47HOT ROLLED STEEL BEAM W10 X 22.0# WIDE FLANGE BEAM CUT TO 22.5 FEET AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
48HOT ROLLED STEEL BEAM W10 X 22.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
49HOT ROLLED STEEL BEAM W10 X 26.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
50HOT ROLLED STEEL BEAM W10 X 26.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
51HOT ROLLED STEEL BEAM W12 X 26.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
52HOT ROLLED STEEL BEAM W12 X 26.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
53HOT ROLLED STEEL BEAM W14 X 30.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
54HOT ROLLED STEEL BEAM W14 X 30.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
55HOT ROLLED STEEL BEAM W18 X 35.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
56HOT ROLLED STEEL BEAM W18 X 35.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
57HOT ROLLED STEEL BEAM W18 X 40.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 20 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
58HOT ROLLED STEEL BEAM W18 X 40.0# WIDE FLANGE BEAM CUT TO LENGTH AND FLANGE DRILLED PER SKETCH FOR B525 OR B650 BRACKET ASSEMBLY HOT DIPPED GALVANIZED, LENGTH NOT TO EXCEED 25 FEET LONG, AS PER BID SOLICITATION SECTION 4.4.1.1LINEAR FOOT
Bidders must provide the following information on the State-Supplied Price Sheet:
1. For the price lines that comprise Groups 1 and 2 - Unit Price. The Bidder shall insert a firm, fixed price in U.S. dollars in the “Unit Price” field.
2. For the price lines that comprise Group 3 - Unit Price per Linear Foot. The Bidder shall insert a firm, fixed price in U.S. dollars in the “Unit Price per Linear Foot” field.
3. Manufacturer/Supplier Name - The Bidder shall insert the supplier name or manufacturer name for each product bid in the “Manufacturer/Supplier Name” field.
4. Product Name or Model Number - The Bidder shall insert the product name or model number for each product bid in the “Product Name or Model Number” field.

Please refer to Bid Solicitation Section 3.36 for complete State-Supplied Price Sheet instructions.

Bidders must bid on all price lines contained within the Group in order to be considered a responsive Bidder for the Group. If a Bidder does not bid on all price lines within the Group, its Quote will be considered non-responsive for the Group. If a brand/product bid on a price line within the group is deemed non-responsive, the entire group that price line item is part of will be deemed non-responsive, as these price lines were grouped to create a single award, with the intent that all price lines in the group will be awarded.
A Bidder may bid on one, two or all groups. Bidders are not required to bid on both groups in order to be considered responsive.

Sheet2

Sheet3

Sheet4

Sheet5

File details come from the government source that posted it. Updated .