Spring_2025_Demolition_of_Hazardous_Structures_Specification.pdf

PDF 41 MB Posted Jun 2, 2025

Attached to: Demolition Projects 2025
Solicitation number: 2025-ITB-057
Issued by: Lackawanna County, Pennsylvania

About this file

Written by GovTribe AI · Jun 27, 2025

The document is a Limited Asbestos Containing Materials Inspection and Invitation to Bid from the City of Scranton, Office of Economic and Community Development, for the demolition of hazardous structures at three properties: 2118 Cedar Avenue, 812 Fellows Street, and 231-233 Harrison Avenue. The project involves asbestos abatement, structural demolition, utility capping and removal, site grading and restoration, and disposal of demolition materials. Sealed proposals will be received online via the City's e-Procurement Portal until 5:00 PM on Tuesday, June 24, 2025, with questions accepted until 5:00 PM on Tuesday, June 13, 2025. Bidders must register on the e-Procurement Portal to participate, and a video of the proposal opening will be available on ECTV.

The asbestos inspection revealed asbestos-containing materials (ACM) at 231-233 Harrison Avenue, specifically pipe and fitting insulation in the basement, estimated at approximately 150 linear feet and requiring professional abatement. The estimated cost for ACM removal at this location is $3,750, with an additional $750 for mobilization and demobilization, totaling $4,500. No asbestos-containing materials were identified at the 812 Hampton Street location. The project is funded through the City of Scranton's Office of Economic and Community Development, with the inspection conducted by Quad Three Group, Inc. and laboratory analysis performed by International Asbestos Testing Laboratories.

View the file

Other files

File	Type	Posted
Demolition_Projects_2025.pdf	PDF	Jun 4, 2025
2118_Cedar_Ave_ERR.pdf	PDF	May 16, 2025
233_Harrison_Ave_SHPO.pdf	PDF	May 16, 2025
812_Hampton_SHPO.pdf	PDF	May 16, 2025
812_Hampton_St_Demo_letter.pdf	PDF	May 16, 2025
812_Hampton_St_ERR_with_Attachments.pdf	PDF	May 16, 2025
2118_Cedar_Ave_Inspection_Report.pdf	PDF	May 16, 2025
2118_Cedar_Avenue_Demo_letter.pdf	PDF	May 16, 2025
231_Harrison_Ave_Inspection_Report.pdf	PDF	May 16, 2025
812_Fellows_St_812_Rear_Hampton_Inspection_Report.pdf	PDF	May 16, 2025
812_Hampton_St_HAB_Forfeiture.pdf	PDF	May 16, 2025
2118_Cedar_Ave_SHPO_Response_Letter.pdf	PDF	May 16, 2025
231-233_harrison_ave_demo_letter.pdf	PDF	May 16, 2025
233_Harrison_Ave_with_Attachments_ERR.pdf	PDF	May 16, 2025
Bid_Form_Template_-_City_of_Scranton_Demolition_Properties.docx	DOCX document	May 13, 2025
Federal_Certification_Regarding_Lobbying_as_of_8.9.24.pdf	PDF	Feb 11, 2025

Show all 16

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

INVITATION TO BID 001116.21 - 1

SECTION 001116.21 – INVITATION TO BID

Notice is hereby given that the City of Scranton, Office of Economic and Community Development is seeking separate, sealed proposals for an individual or firm for the demolition of hazardous structures.

Proposals will be received online by the City of Scranton Controller via the City’s e-Procurement Portal (https://secure.procurenow.com/portal/scrantonpa) until 5:00 PM, prevailing time on Tuesday, June 24, 2025, at which time such proposals will be opened in City Council Chambers, 2nd Floor and made available for public viewing on ECTV (www.youtube.com/user/electriccitytv570). Questions may be submitted to the City’s e-Procurement Portal until 5:00 PM, prevailing time on Tuesday, June 13, 2025.

Responses will be provided via City’s e-Procurement Portal to all registered parties.

CITY OF SCRANTON

Demolition of Hazardous Structures

Proposals shall be made upon the specifications included in the official Proposal Request which may be obtained by visiting the City of Scranton’s e-Procurement Portal, https://secure.procurenow.com/portal/scrantonpa. If you intend to submit a proposal, you shall register on the City’s e-Procurement Portal. If you intend to submit a proposal, you shall register on the City’s e- Procurement Portal. Once registered, Companies may view and click "Follow" to be a prospective Respondent for this solicitation and will appear on the Follower’s list. Companies that fail to Follow this project will not receive automatic addenda notifications, nor will they be able to draft a response in the City’s e-Procurement Portal and therefore will be unable to participate or be considered for this RFP.

The work includes but is not limited to all labor, materials, tools, and oversight and permits required to abate existing asbestos as required and demolish the following properties in their entirety. The nature of the work includes asbestos abatement, structural demolition, capping and removal of existing utilities, site grading and restoration, and disposal of all demolition materials.

• 2118 Cedar Avenue, Scranton, PA 18505

• 812 Fellows Street (812 Rear Hampton), Scranton, PA 18504

• 231-233 Harrison Avenue, Scranton, PA 18510 https://secure.procurenow.com/portal/scrantonpa http://www.youtube.com/user/electriccitytv570 https://secure.procurenow.com/portal/scrantonpa

LIMITED ASBESTOS CONTAINING MATERIALS INSPECTION

Throughout:

812 HAMPTON STREET

SCRANTON, PA 18504

Prepared for:

SCRANTON OFFICE OF ECOMONIC AND COMMUNITY DEVELOPMENT

340 NORTH WASHINGTON AVENUE (MUNICIPAL BUILDING),

SCRANTON, PA 18503

Attention:

Ms. Cecelia Monroe

Prepared by:

QUAD THREE GROUP, INC.

37 NORTH WASHINGTON STREET

WILKES-BARRE, PENNSYLVANIA 18701

PH. (570) 829 - 4200

FAX (570) 829 - 0302

PROJECT # 13030.04.08

NOVEMBER 2023

TABLE OF CONTENTS

I. EXECUTIVE SUMMARY…………………………………………….1.

II. INTRODUCTION……………………………………………………..1.

III. SURVEY AREA AND DISCUSSION……………………………....2.

IV. MATERIALS SAMPLING AND ANALYTICAL…………………...2.

V. INSPECTION FINDINGS AND RECOMMENDATIONS…………3.

VI. ASBESTOS CONTAINING MATERIALS ABATEMENT………..3.

COST

VII. INSPECTION DISCLAIMER………………………………………..4.

APPENDICES

APPENDIX A ASBESTOS ANALYSIS RESULTS

APPENDIX B SITE PHOTOS

APPENDIX C CERTIFICATIONS

Scranton Office of Economic and Community Development 340 North Washington Avenue (Municipal Building), Scranton, PA 18503

I. EXECUTIVE SUMMARY

An Asbestos Containing Materials Inspection was conducted on November 9th, 2023 within the planned demolition site located at 812 Hampton Street, Scranton, Pennsylvania. The purpose of the inspection was to determine if asbestos containing materials exist within the structure. Mr. William Sterling (PA Asbestos Inspector #057069) of Quad Three Group, Inc. conducted the inspection in conjunction with demolition scheduled at the structure.

As part of this asbestos inspection, the quantities and conditions of asbestos containing materials were identified. A total of two (2) layers of material samples were collected and analyzed.

Asbestos containing materials (ACM) were not identified on the accessible areas of the structure located at 812 Hampton Street, Scranton, Pennsylvania

Materials that were non-suspect or were sampled and through analysis found to not contain asbestos include exterior asphalt shingle material. Descriptions of all the material samples collected can be found in Appendix A.

The conclusions presented in this report are the result of the coalition, compilation and analysis of samples and other information obtained during the inspection. The results presented in this report represent the conditions present at the time of the inspection. Quad Three Group has no control over conditions or events that occurred following the date of inspection.

II. INTRODUCTION

On November 9 th, 2023, a limited asbestos inspection was performed within 812 Hampton Street, Scranton, Pennsylvania. The purpose of the inspection was to visually locate, identify and quantify asbestos containing materials (ACM) as they exist within the structure scheduled for demolition. The survey / inspection process included:

A. Inspecting the area to identify representative “suspected” asbestos-containing materials, types and sampling sites.

B. Collecting representative samples from any suspect material in order to identify all

Asbestos Containing Materials (ACM). Examples of these materials include Pipe insulation, plaster, sheet-rock, floor tiles, linoleum, etc.

C. Sampling was performed by experienced, licensed personnel utilizing semi -destructive sampling techniques in an attempt to locate asbestos containing materials.

D. Laboratory analysis of the materials sampled was performed at an accredited laboratory using the EPA recommended method of polarized light microscopy (PLM) for friable samples.

III. SURVEY AREA DISCUSSION

The property was comprised of a two-story structure at 812 Hampton Street. The interior of the structure offered limited access at the time of the inspection due to unknown structural concerns. The structure appeared to be unsafe to enter based on the collapsed roof / ceiling and unsafe access to entrances and exits blocked by debris.

The Inspection was limited to the exterior of the structure. Major structural components include concrete, brick, stone, block, and wood.

IV. MATERIALS SAMPLING AND ANALYTICAL METHODOLOGY

The building inspection was conducted by an inspector, qualified by experience, education and training in the recognition of suspect asbestos-containing materials (ACM). An initial walk through was conducted to identify suspect asbestos containing materials and to group them into homogeneous sampling areas.

Following the walkthrough, the number of samples required to determine the presence of ACM in the study areas was determined. Sample collection was performed with the intent to identify and locate asbestos containing materials and to group them into homogeneous material categories. This grouping allowed the inspectors to identify like materials within the facility to avoid over sampling or mischaracterization of an asbestos containing material.

The majority of the ACM samples were located utilizing non-destructive techniques. Some areas of ACM may still exist in areas that could not be accessed until complete interior demolition is completed.

Representative samples of each “suspect asbestos containing material” were collected utilizing approved federal and state methods. When samples were collected, the locations were noted. Measurements were taken to determine the approximate quantity of suspect material. The condition of the material was also documented at that time.

All material samples were analyzed via Polarized Light Microscopy (PLM) as per EPA/600R- 93-116, July 1993.

The analytical results and locations for all samples collected can be found in Appendix A.

The samples were analyzed by International Asbestos Testing Laboratories of Mt. Laurel, New Jersey. IATL is accredited by the National Institute of Standards and Technology’s “National Voluntary Laboratory Accreditation Program” NVLAP (#1011500-0). IATL has developed and implemented an intra laboratory quality assurance/quality control program to ensure accuracy and consistency of results.

Asbestos is present if the material analyzed is greater than one percent (>1.0%) by weight.

This stipulation is outlined in the EPA Publication EPA 500/5-85-024, Section 2.2.2.2.

V. INSPECTION FINDINGS AND RECOMMENDATIONS

Asbestos containing materials have not been identified on the accessible areas of the structure.

Asbestos containing materials are categorized as containing asbestos concentrations greater than one percent (>1.0%) by weight. Asbestos fiber concentrations less than one percent (<1.0%) by weight are still regulated under OSHA standard 1926.1101.

Below are the results of the building inspection. The results indicate the sample location, sample numbers, material and condition. Some of the materials were homogenized for sampling purposes. For example, once a homogeneous material was sampled, the sample result could be considered representative for that material throughout the residence. If one sample of a homogeneous material tested positive for asbestos, then the entire homogeneous material was classified as asbestos containing in accordance with Environmental Protection Agency Guidelines.

The conditions of the materials are designated as good, damaged or significantly damaged.

The following materials were found to contain more than one percent (>1.0%) asbestos by weight:

ASBESTOS CONTAINING MATERIALS WERE NOT IDENTIFIED ON THE ACCESSIBLE

AREAS OF THE STRUCTURE LOCATED AT 812 HAMPTON STREET SCRANTON, PA.

Analytical results for the materials sampled are located in Appendix A.

Friable materials are materials that can be crushed by applying hand pressure. Non-friable materials are materials that typically cannot be crushed by hand pressure (floor tiles/mastics). If grinding or pulverization were to occur during demolition, non-friable materials can be rendered friable.

Asbestos containing materials (friable and non-friable) located on the interior / exterior of a building, which will be disturbed during renovations / demolition, must be removed and disposed of by a licensed asbestos abatement contractor.

VI. ASBESTOS CONTAINING MATERIAL ABATEMENT COSTS

As part of this report, cost estimates have been provided to help assist the Scranton Office of Economic and Community Development to evaluate the costs associated with a renovation or demolition project. The cost estimates have been arrived at independently and have been inserted in this report solely for the use of the Scranton Office of Economic and Community Development. The following estimate has been prepared for budgetary purposes. All measurements are approximate. Contractors should independently verify the quantities of materials when preparing a cost estimate for removal.

The following applies:

AREAS OF THE STRUCTURE LOCATED AT 812 HAMPTON STREET SCRANTON, PA.

VII. INSPECTION DISCLAIMER

Data and other information in this report are only valid for the prevailing conditions identified during this investigation and will be kept confidential. Any information contained in this report will not be released to third parties without the expressed written consent of the client except where required by law.

The conclusions expressed within this report are intended to advise the client of the potential regulated environmental hazards within the subject property. It is the responsibility of the client to comply with current regulations relating to the hazards identified in this report. The burden for financial or health consequences for action or lack of action taken by the client or the client's agent is the responsibility of the client.

APPENDIX A

Lab No.: 7693714 Client No.: 001

Analyst Observation: Green/Grey Shingle Client Description: Shingle Material

Location: Exterior Facility:

Percent Asbestos:

None Detected

Percent Non-Asbestos Fibrous Material:

5 Fibrous Glass

Percent Non-Fibrous Material:

Lab No.: 7693715 Client No.: 002

Analyst Observation: Green/Grey Shingle Client Description: Shingle Material

Location: Exterior Facility:

Percent Asbestos:

None Detected

Percent Non-Asbestos Fibrous Material:

5 Fibrous Glass

Percent Non-Fibrous Material:

Laboratory Director

Approved By:

Date Analyzed:

11/10/2023Date Received:

Analyst:

Please refer to the Appendix of this report for further information regarding your analysis.

Signature:

Maxamillian Roselli

11/10/2023 Frank E. Ehrenfeld, III

9000 Commerce Parkway Suite B Mt. Laurel, New Jersey 08054

Telephone: 856-231-9449 Email: customerservice@iatl.com

CERTIFICATE OF ANALYSIS

Client: Quad 3 Group -

37 N Washington Street Wilkes-Barre PA 18701

11/10/2023Report Date:

Report No.: 692328 - PLM Project: 812 Hampton St Project No.: 13030.04

PLM BULK SAMPLE ANALYSIS SUMMARY

Client: QUA440

Dated : 11/13/2023 11:54:06 Page 1 of 4

Appendix to Analytical Report Customer Contact: William Sterling Method:40 CFR Appendix E to Subpart E of Part 763, interim method for the Determination of Asbestos in Bulk Insulation Samples, USEPA 600, R93-116 and NYSDOH ELAP 198.1 as needed.

This appendix seeks to promote greater understanding of any observations, exceptions, special instructions, or circumstances that the laboratory needs to communicate to the client concerning the above samples. The information below is used to help promote your ability to make the most informed decisions for you and your customers.

Please note the following points of contact for any questions you may have.

iATL Customer Service: customerservice@iatl.com iATL Office Manager:wchampion@iatl.com iATL Account Representative: Shirley Clark Sample Login Notes: See Batch Sheet Attached Sample Matrix: Bulk Building Materials Exceptions Noted: See Following Pages

General Terms, Warrants, Limits, Qualifiers:

General information about iATL capabilities and client/laboratory relationships and responsibilities are spelled out in iATL policies that are listed at www.iATL.com and in our Quality Assurance Manual per ISO 17025 standard requirements. The information therein is a representation of iATL definitions and policies for turnaround times, sample submittal, collection media, blank definitions, quantification issues and limit of detection, analytical methods and procedures, sub-contracting policies, results reporting options, fees, terms, and discounts, confidentiality, sample archival and disposal, and data interpretation.

iATL warrants the test results to be of a precision normal for the type and methodology employed for each sample submitted. iATL disclaims any other warrants, expressed or implied, including warranty of fitness for a particular purpose and warranty of merchantability. iATL accepts no legal responsibility for the purpose for which the client uses test results. Any analytical work performed must be governed by our Standard Terms and Conditions. Prices, methods and detection limits may be changed without notification. Please contact your Customer Service Representative for the most current information.

This confidential report relates only to those item(s) tested and does not represent an endorsement by NIST-NVLAP, AIHA LAP LLC, or any agency of local, state or province governments nor of any agency of the U.S. government.

This report shall not be reproduced except in full, without written approval of the laboratory.

Information Pertinent to this Report:

Analysis by US EPA 600 93-116: Determination of Asbestos in Bulk Building Materials by Polarized Light Microscopy (PLM).

Certifications:

NIST-NVLAP No. 101165-0• NYSDOH-ELAP No. 11021• AIHA-LAP, LLC No. 100188•

Quantification at <0.25% by volume is possible with this method. (PC) Indicates Stratified Point Count Method performed. (PC-Trace) means that asbestos was detected but is not quantifiable under the Point Counting regimen. PC Trace represents a <0.25% amount. Analysis includes all distinct separable layers in accordance with EPA 600 Method. If not reported or otherwise noted, layer is either not present or the client has specifically requested that it not be analyzed (ex. analyze until positive instructions). Small asbestos fibers may be missed by PLM due to resolution limitations of the optical microscope. Therefore, PLM is not consistently reliable in detecting asbestos in non-friable organically bound (NOB) materials. Quantitative transmission electron microscopy (TEM) is currently the only method that can pronounce materials as non-asbestos containing.

Analytical Methodology Alternatives: Your initial request for analysis may not have accounted for recent advances in regulatory requirements or advances in technology that are routinely used in similar situations for other qualified projects. You may have the option to explore additional analysis for further information. Below are a few options, listed as the matrix followed by the appropriate methodology. Also included are links to more information on our website.

Bulk Building Materials that are Non-Friable Organically Bound (NOB) by Gravimetric Reduction techniques employing PLM and TEM: ELAP 198.6 (PLM-NOB), ELAP 198.4 (TEM-NOB) See additional information at the end of this appendix.

9000 Commerce Parkway Suite B Mt. Laurel, New Jersey 08054

Telephone: 856-231-9449 Email: customerservice@iatl.com

CERTIFICATE OF ANALYSIS

Client: Quad 3 Group - 37 N Washington Street Wilkes-Barre PA 18701

11/10/2023Report Date:

Report No.: 692328 - PLM Project: 812 Hampton St Project No.: 13030.04

Page 2 of 4Dated : 11/13/2023 11:54:06

Loose Fill Vermiculite Insulation, Attic Insulation, Zonolite (copyright), etc.: US EPA 600 R-4/004 (multi-tiered analytical process) Sprayed On Insulation/Fireproofing with Vermiculite (SOF-V): ELAP 198.8 (PLM-SOF-V)

Soil, sludge, sediment, aggregate, and like materials analyzed for asbestos or other elongated mineral particles (ex. erionite, etc.): ASTM D7521, CARB 435, and other options available

Asbestos in Surface Dust according to one of ASTM's Methods (very dependent on sampling collection technique – by TEM): ASTM D 5755, D5756, or D6480

Various other asbestos matrices (air, water, etc.) and analytical methods are available.

Disclaimers / Qualifiers:

There may be some samples in this project that have a "NOTE:" associated with a sample result. We use added disclaimers or qualifiers to inform the client about something that requires further explanation. Here is a list with highlighted disclaimers that may be pertinent to this project. For a full explanation of these and other disclaimers, please inquire at customerservice@iatl.com.

1) Note: No mastic provided for analysis.

2) Note: Insufficient mastic provided for analysis.

3) Note: Insufficient material provided for analysis.

4) Note: Insufficient sample provided for QC reanalysis.

5) Note: Different material than indicated on Sample Log / Description.

6) Note: Sample not submitted.

7) Note: Attached to asbestos containing material.

8) Note: Received wet.

9) Note: Possible surface contamination.

10) Note: Not building material. 1% threshold may not apply.

11) Note: Recommend TEM-NOB analysis as per EPA recommendations.

12) Note: Asbestos detected but not quantifiable.

13) Note: Multiple identical samples submitted, only one analyzed.

14) Note: Analyzed by EPA 600/R-93/116. Point Counting detection limit at 0.080%.

15) Note: Analyzed by EPA 600/R-93/116. Point Counting detection limit at 0.125%.

16) Note: This sample contains >10% vermiculite mineral. See Appendix for Recommendations for Vermiculite Analysis.

Recommendations for Vermiculite Analysis:

Several analytical protocols exist for the analysis of asbestos in vermiculite. These analytical approaches vary depending upon the nature of the vermiculite mineral being tested (e.g. un-processed gange, homogeneous exfoliated books of mica, or mixed mineral composites).Please contact your client representative for pricing and turnaround time options available.

iATL recommends initial testing using the EPA 600/R-93/116 method. This method is specifically designed for the analysis of asbestos in bulk building materials. It provides an acceptable starting point for primary screening of vermiculite for possible asbestos.

Results from this testing may be inconclusive. EPA suggests proceeding to a multi-tiered analysis involving wet separation techniques in conjunction with PLM and TEM gravimetric analysis (EPA 600/R-04/004).

For New York State customers, NYSDOH requires disclaimers and qualifiers for various vermiculite containing samples that direct analysis via ELAP198.6 and ELAP198.8 for samples that contain >10% vermiculite mineral where ELAP198.6 may be used to evaluate the asbestos content of the material. However, any test result using ELAP198.6 will be reported with the following disclaimer: “ELAP198.6 method does not remove vermiculite and may underestimate the level of asbestos present in a sample containing >10% vermiculite.”

Further information on this method and other vermiculite and asbestos issues can be found at the following: Agency for Toxic Substances and Disease Registry (ATSDR) www.atsdr.cdc.gov, United States Geological Survey (USGS) www.minerals.usgs.gov/minerals/, US EPA www.epa.gov/asbestos. The USEPA also has an informative brochure "Current Best Practices for Vermiculite Attic Insulation" EPA 747F03001 May 2003, that may assist the health and remediation professional. NYS customers please follow current NYSDOH ELAP requirements per policy on subject of surfacing and vermiculite, May 6, 2016, Testing Requirements for Surfacing Material Containing Vermiculite (https://www.wadsworth.org/sites/default/files/WebDoc/I198_8_02_2.pdf)

The following is a summary of the analytical process outlines in the EPA 600/R-04/004 Method:

1)Analytical Step/Method: Initial Screening by PLM, EPA 600R-93/116 Requirements/Comments: Minimum of 0.1 g of sample. ~0.25% for most samples.

9000 Commerce Parkway Suite B Mt. Laurel, New Jersey 08054

Telephone: 856-231-9449 Email: customerservice@iatl.com

CERTIFICATE OF ANALYSIS

Client: Quad 3 Group - 37 N Washington Street Wilkes-Barre PA 18701

11/10/2023Report Date:

Report No.: 692328 - PLM Project: 812 Hampton St Project No.: 13030.04

Page 3 of 4Dated : 11/13/2023 11:54:06

2)Analytical Step/Method:Wet Separation by PLM Gravimetric Technique, EPA R-04/004 Requirements/Comments: Minimum 50g** of dry sample. Analysis of "Sinks" only.

3)Analytical Step/Method:Wet Separation by PLM Gravimetric Technique, EPA R-04/004 Requirements/Comments: Minimum 50g** of dry sample. Analysis of "Floats" only.

4)Analytical Step/Method:Wet Separation by TEM Gravimetric Technique, EPA R-04/004 Requirements/Comments: Minimum 50g** of dry sample. Analysis of "Sinks" only.

5)Analytical Step/Method:Wet Separation by TEM Gravimetric Technique, EPA R-04/004 Requirements/Comments: Minimum 50g** of dry sample. Analysis of "Suspension" only.

*With advance notice and confirmation by the laboratory.

**Approximately 1 Liter of sample in double-bagged container (~9x6 inch bag of sample).

New York State Department of Health requires that samples originating from NYS that they categorize as Non-friable Organically Bound materials can only be confirmed as None Detected for asbestos by method 198.4. See the table below for a list of those materials. (ENVIRONMENTAL LABORATORY APPROVAL PROGRAM CERTIFICATION MANUAL - ITEM No. 198.1, Revision Date 5/6/16)

*Asphalt Shingles, Caulking, Ceiling Tiles with Cellulose, Duct Wrap, Glazing, Mastic, Paint Chips, Resilient Floor Tiles, Rubberized Asbestos Gaskets, Siding Shingles, Vinyl Asbestos Tile, NOB materials (other that SM-V) with <10% vermiculite, Any material (Friable or NOB other than SM-V) with >10% vermiculite.

Statistically derived uncertainty with any measure should be taken into consideration when reviewing and interpreting all reported data and results. A more comprehensive listing of accuracy, precision, and uncertainty as it impacts this method is available upon request.

9000 Commerce Parkway Suite B Mt. Laurel, New Jersey 08054

Telephone: 856-231-9449 Email: customerservice@iatl.com

CERTIFICATE OF ANALYSIS

Client: Quad 3 Group - 37 N Washington Street Wilkes-Barre PA 18701

11/10/2023Report Date:

Report No.: 692328 - PLM Project: 812 Hampton St Project No.: 13030.04

Page 4 of 4Dated : 11/13/2023 11:54:06

APPENDIX B

PHOTOS

APPENDIX C

37 North Washington Street Wilkes-Barre, PA 18701

570.829.4200 www.quad3.com

2118 CEDAR AVENUE

SCRANTON, PA 18505

Mr. Andrew Conners

WILKES-BARRE, PENNSYLVANIA 18701

PROJECT # 13030.04.27

MARCH 2025

VI. ASBESTOS CONTAINING MATERIALS ABATEMENT………..3.

An Asbestos Containing Materials Inspection was conducted on March 7th, 2025 within the planned demolition site located at 2118 Cedar Avenue, Scranton, Pennsylvania. The purpose of the inspection was to determine if asbestos containing materials exist within the materials were identified. A total of five (5) multi-layered bulk material samples were collected and analyzed.

Asbestos containing materials (ACM) were not identified on the accessible areas of the structure located at 2118 Cedar Avenue, Scranton, Pennsylvania asbestos include exterior concrete coating. Descriptions of all the material samples collected can be found in Appendix A.

presented in this report represent the conditions present at the time of the inspection. Quad

On March 7 th, 2025, a limited asbestos inspection was performed within 2118 Cedar Avenue, Scranton, Pennsylvania. The purpose of the inspection was to visually locate, identify and quantify asbestos containing materials (ACM) as they exist within the structure scheduled for demolition. The survey / inspection process included:

The property was comprised of a two story structure at 2118 Cedar Avenue. The interior of the structure was inaccessible at the time of the inspection due to unknown structural concerns caused by severe fire damage and unsafe entrances and exits.

The Inspection was limited to the accessible areas of the exterior of the structure.

Major structural components include concrete, brick, stone, block, and wood.

identify and locate asbestos containing materials and to group them into homogeneous

New Jersey. IATL is accredited by the National Institute of Standards and Technology’s “National Voluntary Laboratory Accreditation Program” NVLAP (#1011500-0). IATL has

Asbestos containing materials have not been identified on the accessible areas of the structure.

sampling purposes. For example, once a homogeneous material was sampled, the sample result could be considered representative for that material throughout the residence. If one sample of a homogeneous material tested positive for asbestos, then the entire by weight:

AREAS OF THE STRUCTURE LOCATED AT 2118 CEDAR AVENUE, SCRANTON, PA.

renovation or demolition project. The cost estimates have been arrived at independently and have been inserted in this report solely for the use of the Scranton Office of Economic and Community Development. The following estimate has been prepared for budgetary purposes. All measurements are approximate. Contractors should

AREAS OF THE STRUCTURE LOCATED AT 2118 CEDAR AVENUE, SCRANTON, PA.

during this investigation and will be kept confidential. Any information contained in this report will not be released to third parties without the expressed written consent of the client except where required by law.

EMSL Analytical, Inc.

200 Route 130 North Cinnaminson, NJ 08077

Tel/Fax: (800) 220-3675 / (856) 786-5974 http://www.EMSL.com / cinnasblab@EMSL.com

042504605EMSL Order:

Customer ID: QUAD30

Customer PO:

Project ID:

Attention: Phone:William Sterling (570) 829-4200

Fax:Quad 3 Group, Inc. (570) 829-0302

Received Date:37 N. Washington Street 03/12/2025 11:30 AM

Analysis Date:Wilkes Barre, PA 18701 03/15/2025 - 03/17/2025

Collected Date: 03/07/2025

Project: 2118 Cedar Avenue

Test Report: Asbestos Analysis of Bulk Materials via AHERA Method 40CFR 763 Subpart E

Appendix E supplemented with EPA 600/R-93/116 using Polarized Light Microscopy

Sample Description Appearance % Fibrous % Non-Fibrous

Non-Asbestos Asbestos

% Type

042504605-0001

None DetectedNon-fibrous (Other)100%Gray/White

Non-Fibrous

Homogeneous

Exterior - Concrete

Foundation Coating

042504605-0002

None DetectedNon-fibrous (Other)100%Gray/White

Non-Fibrous

Homogeneous

Exterior - Concrete

Foundation Coating

042504605-0003

None DetectedNon-fibrous (Other)100%Gray/White

Non-Fibrous

Homogeneous

Exterior - Concrete

Foundation Coating

042504605-0004

None DetectedNon-fibrous (Other)100%Gray

Non-Fibrous

Homogeneous

Exterior - Concrete

Foundation Coating

042504605-0005

None DetectedNon-fibrous (Other)100%Gray

Non-Fibrous

Homogeneous

Exterior - Concrete

Foundation Coating

Analyst(s)

Andrew Borsos (3)

Kiara Stefanik (2)

Samantha Rundstrom, Laboratory Manager or Other Approved Signatory

EMSL maintains liability limited to cost of analysis. Interpretation and use of test results are the responsibility of the client. This report relates only to the samples reported above, and may not be reproduced, except in full, without written approval by EMSL. EMSL bears no responsibility for sample collection activities or analytical method limitations. The report reflects the samples as received.

Results are generated from the field sampling data (sampling volumes and areas, locations, etc.) provided by the client on the Chain of Custody. Samples are within quality control criteria and met method specifications unless otherwise noted. The above analyses were performed in general compliance with Appendix E to Subpart E of 40 CFR (previously EPA 600/M4-82-020 “Interim Method”) but augmented with procedures outlined in the 1993 (”final”) version of the method. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the federal government. Non-friable organically bound materials present a problem matrix and therefore EMSL recommends gravimetric reduction prior to analysis. Unless requested by the client, building materials manufactured with multiple layers (i.e. linoleum, wallboard, etc.) are reported as a single sample. Estimation of uncertainty is available on request.

Samples analyzed by EMSL Analytical, Inc. Cinnaminson, NJ NVLAP Lab Code 101048-0, AIHA LAP, LLC-IHLAP Lab 100194, PA ID# 68-00367, LA #04127

Initial report from: 03/17/2025 09:25:08

Page 1 of 1ASB_PLM_0008_0002 - 2.31 Printed: 3/17/2025 9:25 AM

231 – 233 HARRISON AVENUE

SCRANTON, PA 18510

Mr. Andrew Conners

WILKES-BARRE, PENNSYLVANIA 18701

PROJECT # 13030.04.26

MARCH 2025

VI. ASBESTOS CONTAINING MATERIALS ABATEMENT………..4.

An Asbestos Containing Materials Inspection was conducted on March 7th, 2025 within the planned demolition site located at 231 – 233 Harrison Avenue, Scranton, Pennsylvania. The purpose of the inspection was to determine if asbestos containing materials exist within the materials were identified. A total of ten (10) multi-layered bulk material samples were collected and analyzed.

Asbestos containing materials (ACM) were identified on the accessible areas of the structure located at 231 – 233 Harrison Avenue, Scranton, Pennsylvania asbestos include exterior concrete foundation. Descriptions of all the material samples collected can be found in Appendix A.

presented in this report represent the conditions present at the time of the inspection. Quad

On March 7 th, 2025, a limited asbestos inspection was performed within 231 – 233 Harrison Avenue, Scranton, Pennsylvania. The purpose of the inspection was to visually locate, identify and quantify asbestos containing materials (ACM) as they exist within the structure scheduled for demolition. The survey / inspection process included:

The property was comprised of a multi-unit structure at 231 – 233 Harrison Avenue. The interior of the structure offered limited access at the time of the inspection due to unknown structural concerns caused by the removed / collapsed stairs, collapsing entrance overhangs, collapsing ceilings / floors and interior debris. The Inspection was limited to the accessible areas of the interior and exterior of the structure. Major structural components include concrete, brick, stone, block, and wood.

identify and locate asbestos containing materials and to group them into homogeneous

New Jersey. IATL is accredited by the National Institute of Standards and Technology’s “National Voluntary Laboratory Accreditation Program” NVLAP (#1011500-0). IATL has

Asbestos containing materials have been identified within the structure and are listed in the following summary along with the material condition. The quantities are approximate and should be confirmed by an abatement contractor prior to providing cost estimates for removal.

Asbestos pipe / fitting insulation is located throughout the basement of the structure located at 231 – 233 Harrison Avenue. The pipe / fitting insulation is a friable material.

All quantities are estimates based on accessible areas. Additional quantities may exist within the structure.

231 – 233 HARRISON AVENUE, SCRANTON PA

Location/Sample # Material Condition Quantity Notes

Basement Sample # 008 - 010

Pipe / Fitting Insulation Damaged / Friable ~ 150 Ln Ft

Located in multiple areas throughout the basement of the structure.

QUANITY IS ESTIMATED BASED ON

ACCESIABLE AREAS. ADDITIONAL

QUANTITIES MAY EXIST

Location/Sample # Material Condition Estimated Cost

Basement Sample # 008 - 010

Pipe / Fitting Insulation Damaged / Friable ~ 150 Ft2 @ $ 25.00 / Ln Ft = $ 3,750.00

QUANITY IS ESTIMATED BASED ON ACCESIABLE AREAS.

ADDITIONAL QUANTITIES MAY EXIST

TOTAL ESTIMATED COST FOR ACM REMOVAL $ 3,750.00

MOBILIZATION AND DEMOBILIZATION

$ 750.00

GRAND TOTAL ESTIMATED COST FOR

$ 4,500.00 during this investigation and will be kept confidential. Any information contained in this report will not be released to third parties without the expressed written consent of the client except where required by law.

Tel/Fax: (800) 220-3675 / (856) 786-5974 http://www.EMSL.com / cinnasblab@EMSL.com

042504573EMSL Order:

Customer ID: QUAD30

Customer PO:

Project ID:

Attention: Phone:William Sterling (570) 829-4200

Fax:Quad 3 Group, Inc. (570) 829-0302

Received Date:37 N. Washington Street 03/12/2025 11:30 AM

Analysis Date:Wilkes Barre, PA 18701 03/14/2025 - 03/15/2025

Collected Date: 03/07/2025

Project: 231-233 / Harrison Avenue

Test Report: Asbestos Analysis of Bulk Materials via AHERA Method 40CFR 763 Subpart E

Appendix E supplemented with EPA 600/R-93/116 using Polarized Light Microscopy

Sample Description Appearance % Fibrous % Non-Fibrous

Non-Asbestos Asbestos

% Type

001-Plaster

042504573-0001

None DetectedNon-fibrous (Other)98%Hair2%Gray/Tan

Fibrous

Homogeneous

Basement - First

Floor - Wall/Ceiling

Plaster

001-Skim Coat

042504573-0001A

None DetectedNon-fibrous (Other)100%White

Non-Fibrous

Homogeneous

Basement - First

Floor - Skim Coat

002-Plaster

042504573-0002

None DetectedNon-fibrous (Other)98%Hair2%Gray/Tan

Fibrous

Homogeneous

Basement - First

Floor - Wall/Ceiling

Plaster

002-Skim Coat

042504573-0002A

None DetectedNon-fibrous (Other)100%White

Non-Fibrous

Homogeneous

Basement - First

Floor - Skim Coat

003-Plaster

042504573-0003

None DetectedNon-fibrous (Other)98%Hair2%Gray/Tan

Fibrous

Homogeneous

Basement - First

Floor - Wall/Ceiling

Plaster

003-Skim Coat

042504573-0003A

None DetectedNon-fibrous (Other)100%White

Non-Fibrous

Homogeneous

Basement - First

Floor - Skim Coat

004-Plaster

042504573-0004

None DetectedNon-fibrous (Other)98%Hair2%Gray/Tan

Fibrous

Homogeneous

Basement - First

Floor - Wall/Ceiling

Plaster

004-Skim Coat

042504573-0004A

None DetectedNon-fibrous (Other)100%White

Non-Fibrous

Homogeneous

Basement - First

Floor - Skim Coat

005-Plaster

042504573-0005

None DetectedNon-fibrous (Other)98%Hair2%Gray/Tan

Fibrous

Homogeneous

Basement - First

Floor - Wall/Ceiling

Plaster

005-Skim Coat

042504573-0005A

None DetectedNon-fibrous (Other)100%White

Non-Fibrous

Homogeneous

Basement - First

Floor - Skim Coat

006-Plaster

042504573-0006

None DetectedNon-fibrous (Other)92%Cellulose

Hair

Gray

Fibrous

Homogeneous

Basement - First

Floor - Wall/Ceiling

Plaster

006-Skim Coat

042504573-0006A

None DetectedNon-fibrous (Other)100%White

Non-Fibrous

Homogeneous

Basement - First

Floor - Skim Coat

007-Plaster

042504573-0007

None DetectedNon-fibrous (Other)95%Cellulose5%Gray

Fibrous

Homogeneous

Basement - First

Floor - Wall/Ceiling

Plaster

007-Skim Coat

042504573-0007A

None DetectedNon-fibrous (Other)100%White

Non-Fibrous

Homogeneous

Basement - First

Floor - Skim Coat

042504573-0008

65% ChrysotileNon-fibrous (Other)35%Gray

Fibrous

Homogeneous

Basement - Pipe

Insulation

042504573-0009

Positive Stop (Not Analyzed)Basement - Pipe

Insulation

Initial report from: 03/15/2025 12:57:35

Page 1 of 2ASB_PLM_0008_0002 - 2.31 Printed: 3/15/2025 12:57 PM

Tel/Fax: (800) 220-3675 / (856) 786-5974 http://www.EMSL.com / cinnasblab@EMSL.com

042504573EMSL Order:

Customer ID: QUAD30

Customer PO:

Project ID:

Test Report: Asbestos Analysis of Bulk Materials via AHERA Method 40CFR 763 Subpart E

Appendix E supplemented with EPA 600/R-93/116 using Polarized Light Microscopy

Sample Description Appearance % Fibrous % Non-Fibrous

Non-Asbestos Asbestos

% Type

042504573-0010

Positive Stop (Not Analyzed)Basement - Pipe

Insulation

Analyst(s)

Emilie Kalbach (4)

Jamie Horsley (11)

Samantha Rundstrom, Laboratory Manager or Other Approved Signatory

EMSL maintains liability limited to cost of analysis . Interpretation and use of test results are the responsibility of the client. This report relates only to the samples reported above, and may not be reproduced, except in full, without written approval by EMSL. EMSL bears no responsibility for sample collection activities or analytical method limitations . The report reflects the samples as received.

Results are generated from the field sampling data (sampling volumes and areas, locations, etc.) provided by the client on the Chain of Custody. Samples are within quality control criteria and met method specifications unless otherwise noted. The above analyses were performed in general compliance with Appendix E to Subpart E of 40 CFR (previously EPA 600/M4-82-020 “Interim Method”) but augmented with procedures outlined in the 1993 (”final”) version of the method. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST or any agency of the federal government. Non- friable organically bound materials present a problem matrix and therefore EMSL recommends gravimetric reduction prior to analysis . Unless requested by the client, building materials manufactured with multiple layers (i.e. linoleum, wallboard, etc.) are reported as a single sample. Estimation of uncertainty is available on request.

Samples analyzed by EMSL Analytical, Inc. Cinnaminson, NJ NVLAP Lab Code 101048-0, AIHA LAP, LLC-IHLAP Lab 100194, PA ID# 68-00367, LA #04127

Initial report from: 03/15/2025 12:57:35

Page 2 of 2ASB_PLM_0008_0002 - 2.31 Printed: 3/15/2025 12:57 PM mcalvert Pen

�'(�0��(�0��(�

��1��,��(�# �'�(�2� �'��3��*�"�� 4

�5&��5�� &�#56�#65�#05 #��67-5"#�

��"��	��8�	��,��!
�9)�	��	��'��

��1� ��1�

��5:�	��
!��7��;��5:�	��

!��7��;��4

��,��,��5:�	��
!��7��	�!��
	��	��

��8�	��,��!
�9)�	��	��

	��	��8�	�� ,��!
�9)�	��6��	��(

�'��,��+��,��<�"=6��4�>�?>�?4

AB+��,��	��	��
��A4�5:�	��

!��7��;��A A ��+��-�� (��A��'�� ,��A

A��(��,��	��	��
��A��	��	�4��A
A��%��:��>�4'4(��A4�#,��	��	�� A

A�� ?��A�� !��%��*��A A�+��-�� (��A��C�D4D��,��>��A A��A��,�� %�'��A A��A�� %�'��A A��A�� A A��A��, ',��?�+��,��A A��A��+�� '��,��A A��A�� 4��A A@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@A@@@@@@@@@@@@@@@@@@@@@@@@@@@@@A

AB+��,�� %��%��A4�5:� ��

!��7��;��A A��%��-�� (��A��'�� ,��A

A-�� <(��(��,��A��	��	�4��A
A	��	��
��%��A4�#,��	��	�� A
A�:��+��-�� A��	�!��%��*��A

A��(��A��C��4��,��>��,��A A��A�� A A��A��, ��(A A��A�� ',��?�+��A A��A��,��+�� '��A A��A��,�� 4��A A@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@A@@@@@@@@@@@@@@@@@@@@@@@@@@@@@A

��5:� �� !��7�� 8�� 4�B+��,

��	��	��
��	�!�� +��,�
5:�	��
!��7��	��

	��
��	��
��	�� +��
��+��	��+�%��*��,��	��	��,

��+�� 1��4

�� 1�

��	�
��,��5:�	��

!��7�� ,��%%%4��4'�!�%,��'�! �� 4

��		��
��	��
			�	��
			�	��
			�	��
			�	��
			�	��
			�	��

/�%0

�!�+'�&1%!((((((((((((((((((((((() ��(�� (��

/�%0

�� 2 /�� 0��((((((((((((() ��(�� (��

&�&�03	�!&�#�!�3	+��.��&3	+.��%!�&
�3	�&.�,�
3	4.

�&/&3 +&0/%!3 �%�&

3	�1+��
-3	��

/�.!3

�3	�%!!13
0+,.1�'��3	0
1�%!3	0.��5&
3	/��-&3	.

3	&
�	1�!'	+�.

/�%0

�� 2 /�� 0��((((((((((((() ��(�� (�6

&�&�03	+.��%!�&
�3	�&.�,�
3	�&
+&0/%!3	�%�&

3 �%!!13 .

� 1�!' ��"

��7��8��3 0��"��((((((((((() ��(** �6(��

�&+'&9&

&3	�.:%!
%3	��'%3	0.0;.%,&

&3	9&1
%3	&
�	91��

/�%0

��7��8��3 0��"��((((((((((() ��(�� (��

�#######################$�%.#/%��'(#0/

��1�� 2��

+��34!�5��6��7��6�###########$�%)#((��)'#&/

�#######################$�%8#'.��'.#), �+��,,,&*,&8�,&-,'-),), �################$�%)#)(��'/#8/ �###########$�%)#0'��),#''

�+��,,,&*,.8�,&-,'-),))

��9��

��0��#1�)'2�!�%�!��'(��34�!#��5'3#�*6��# ��!7'#�5'3#�*��#8��3��##��9"$9��58�!��0"11�!��'2#�9"%� �#1��9��%�!��'(��##� '!��'2#�9"%��'!�9�'(��'3��/�-

��0��#1��

��0��:��#1��

��0��

��<�'2#�9"%�=��##��'2�!��'2�>�#�"#$��9'#"#$� !�#8)"#��'2�>�#�"#$��##� '!��+��?�!*�9"#$��'3�9�'(��'3�� /�-��#1��'��9��0"11�!��'2#�9"%��"#�+��'!'3$9�=��3�'� ��@3�9'#"#$��#�('!1��3>>"��"))��A">��9'!%��B�"��%'!�� '2#>�#��'2#��)>�!�'#��9"$9�'#��#1��!!*?"))�C��:�

��B��:��+++++++++++++++++++++++,�

��0�B��0��D��B��B��:�<�� '(��3�@3�9�##��"?�!C��

!'�/#�0 �#�0

'2��# %"3%�)��#�4' /�#�5�' �#�6��#�6� !'�/�� 7

��8148��9��:

�;�8(�;<8�0�1��9��:

�(�0 #��50$8��1(#�(�5�=;1#�*51;�4�#��8$�1>1#��1�� 48�#��1( 7>�?�@1�-��%!&�� A

��9��

�(�0 #�$��(�>�(#��$>1�@$��,"#��%"��#��)'/)#��+,��# ?' ��4-�"�#�� "��4 :�9A#��>�50$;�#��50$8��1(#�(�5�=;1#�*5�1;�4�#��?�6�11�# ��1�� 48�#��8$�1>1#��5B8�18�@ �A#��7�>0;1C#�0>1�>8#

0>14>5�#�1>�4=50$8��1(#��8��7#�;?8#�	�=57?;��#�	17(8�#
	5��;<�1#�	5	D58=�11�#�4;>C�#�51;>1#�6�718#�67>0;1C#�7>�?�@1�-

��A��>514;8

0;��6�;C=4��9��9�� :��9��

$8�?

$8�? ��>5147

0;��6�;C=4��9�� 9��

�5B8�18�@8E+��$

��&�+,#�1�"��+,#��)��

��	�
�!#��	%/��
��A#�	5��;<�1#��

+,��'��$�"�A#�� 67>0;1C�@6�"�� )�� %"3%�)��'2��A��>514;8

-/��0�� -��1�2" �& �3%!'��!(&3%+

��1��0�4�1

��5��

�+6%'6"�$!&�!+�*+,-��3 7�8��9�� 2"��& �&!�36�$�3!& �!(&3%+

��1��0�4�1

��+&3+��5��:

��5��

��1��0�4�1

��!!��#+�;��5��:

�� !� �*��+�1�� 8�� <1=<�8��0>��2?��@�A�&&�?

�(B+�&+�*��+�1��

0��

C0�4��8�� <1=<�8��0>��

<�8�� 8��0�� 0��1 �"�+�1��.� <�8� ��8�� 090�1� �0��1 ��7<��,- <.0�4�0�"�� (� ��6048C��"�+�1��

<48��.�6048C��"��.� <�8��1�� 8� ��0 ��<D�� <�8��.�+�1��

0��

C0�4 ��8<�1�� <�8C�1�� 6048C��.� <�8��1�

0��2?��$!&�!+�*��"��

7�<48" ��.01�"��0-�"��.�3 7�8��3 C�180�12?��%@+��!(&3#�*+,-�� C��"��89��"��.�� 3 C�180�12?� ( E(+6�&&�"A�#&+"��& A#!$%&'�*+�1�� 8�� <1=<�8��0>��2

��1��0�4�1

+�+�3�%�%�&��:��5FG��

�+�+��5��

$!&�!+�*��9�0�.�� <��2"�&!�36�$�3!&�*��9�0�.��2��& ��%@+ �C��"��89��"��.�� 2��!(&3%+

��1��0�4�1

+�+�3�%�%�&��5�5��5��F �+�+��5��

�+�@ �*��8� "�$��0 �"��.�3< ��8 -/��3 C�180�12?��($�+��& ?

�(�6%&?��H(&%�3�?��&�� 3+��*38�� 0 ��8C�1�� 0�� ,��.0�4�� 9��8�� <1=<8��0>�� 8��0��1�-�0 ��6048C��1��.�� 4�� 8�� <48� 0D�7��8� C�"�� <�.��8�� 090�1� 0D�7��8� C�� 8��A�1�

�&'��()�*�'��!�++,'�� -,�./��0!

��1��"� ��&'��)�2� �,2�+�0 �� -3 3�� 4��& ,*+.��05��$� ��5� ��#��3&

��+��5�

��#+/�/)�33333333333333333333336�78394��:3:8 ��<�:7;<<��<:=<�=�<��

(+)25*+2�)�2�%,*�/�1�0%�� >��+ ��0(��

$��?�0#�� 4�02��#��+��&�� +��'��?�5� ��$��2�� $��2�� (��5��5��$� A�

��	��
��	��

��2��

5� ��A��$ ��-3 3 ��7�4�� 2��#��+�� 4 ��4��3�)��

��(�� 2��)"�

	��
��4'�	��

��-3	3��
��<� ��(��	��

��3��2��(�� 3

��+��5�

��#+/�/)�33333333333333333333336�7837:��3<9 ��<��B;<<��<�=<�=�<�4

)2)� �)�2�,*+.�0�@ ��5� ��5��$�

��+��5�

��#+/�/)�33333333333333333333336�783�B��73�� <794;<<9�<:=<�=�<�7

(�+. �0�� %�� $&'0�*+#�)�!#*��0)��"�� (��5�� B�:��%�� B893��

��	�
��	�

��0)"��12��3�.�&!4 �.4* �1�

�"�.�&1.1� ��5��6�/6��+��78 ��"�.7�7�$776�7�97/9+7+8

.4"*(!1��:��!��#�!�� 0;�(4 �4*&;� 4&��*(!�&"� <

��0;�	.�*=">1""�:&�'
��0;�	=<�&�: ��6++0;

� <�* 14 �:� ��*��0�.4* �1�

�"�.�&1.1� ��5�8��67��+��6+ ��"�.7��8$77��7�97/9+7+8

!�&> �.4* �=�:&�' ��0

�"�.�&1.1� ��5��+�6+��+��8 ��"�.7��8$77��7�97/9+7+8

&�(�1 <�&�4-�"� .� ��&�.4* �=

�"�.�&1.1� ��5��+�6+��+��8 ��"�.7�/+$77+�7�97/9+7+�

�142��.4* �=

�"�.�&1.1� ��5�8��8��+��/� ��"�.7�/+$77��7�97/9+7+�

!&�<-4&<�:��'�� 0;�� <� *""1?� �:��

��	�
��*�	��

��@++7)��' ��A ��@++7;

��@++7�� '��$�''

BB66BB��/�8/�<��

��A ��;0 ��A ��C ��.4* �1�

��	��
�� !!�"�	�
��	��#��#$

)��+,��)��-.��/�0/�!�1��2��1��	��3��1	�4�5�2
�	��4��
4��*�!��	6,��/�.��)��0�78�5��!��	�
.	��	��1	�4�5��	��1��3��

46�

9��+�&$��%&��&$'&�'�&��

;�<��2��.=��2�*)��)�2�>�;�2� . ?.�-��2�<�(��/

>�1��@��5A� ��5��:�� +�).>��$��B��C� ��+�).>��#��B�B&C� ��+�).>��B��B��$C� ��+�).>��$��B�#�C� ��+�).>��B�$��#��C� ��+�).>��#��#�&�C�

��+�).>�$��B��#BC�

��+�).>��&��C�

��%�>��/�-)��/�( :�<��4�

��	�D��4��2�+��2
��*�A��!�/��2��3��/��2�>��	��!��!�8��	�/��2
��E��	��/��,��4�	F�

4��A��/��

999�)G� '-�=��/). �<� ��*)E��999��

��&H��3��8�4��!��!!�8!��8��

��+�).>��:��*�84�	��
�4��F�1��F2��	��A�84�	��4�	�!�

��A�84�	��2�8�3!��5�		�
�A�84�	��2�4�!�8�5��2�!�!!��5�
��F!��1��4�3��A��84A�	�2�8�	8��3��A��8F2
��A�84�	��A�!��4��3�"��	8!��
��A��8�	��!
��@��5A�	��

��+�).>��:��*�84�	��
�4��F�1��F,�*�84�	��4�	�!�

��A�84� ��,��!!��5��8�� $�� "��8�� 3!�1��,�/�� !� ��$�� "��8�� 4��!'�� $�� "��8��…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Jun 27, 2025.