Exhibit E.pdf
PDF 401 KB Posted
- Attached to
- Screws
- Solicitation number
- SPMYM327Q5008
About this file
This is a Contract Data Requirements List (CDRL) on DD Form 1423 for cap screws under federal contracts SPMYM327Q5008/SPMYM327P5008, printed November 4, 2020. The document establishes two data submission requirements for Item No. 0010 (cap screws):
The first requirement (E001) mandates submission of a Certificate of Compliance (DI-MISC-81356A) as a one-time submission with material delivery. The certification must address technical content as described in the respective contract line items and comply with payment and submission procedures under FAR clauses 252.232-7006, 252.232-7003, or 52.232-36. Each data item must be submitted under a separate shipment number. Distribution is specified as code 133.2 with three total copies required. The technical office responsible is 136.2, with contract reference paragraph C.4.1.
The second requirement (E002) mandates submission of Material Certification/Data Report (DI-MISC-80678) as a one-time submission. This certification must contain actual test results for all chemical and mechanical tests required by specification in quantitative units as specified. Specific provisions exclude paragraphs 10.2.2, 10.2.3, and 10.4 of DI-MISC-80678 from application. Additional requirements include compliance with contract marking and certification requirements for controlled industrial material, and fastener certification must show evidence of testing with the correct number of specimens; new untested fasteners are required for each test involving wedge tensile testing and yield strength testing. Distribution is code 133.2 with three copies required. All submissions follow the same payment and shipment number procedures as E001.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Exhibit A.pdf | ||
| Exhibit C.pdf | ||
| Attachment 2.pdf | ||
| Attachment 3.pdf | ||
| Attachment 5.pdf | ||
| Exhibit D.pdf | ||
| Exhibit B.pdf | ||
| Combined Synopsis Solicitation 27Q5008.pdf | ||
| Security Agreement For Protection of NNPI.pdf | ||
| Attachment 1.pdf | ||
| RFQ 27P5008.pdf | ||
| Attachment 4.pdf |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
5305 1FA EXHIBIT A
SYSTEM/ITEM SCREW, CAP
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 11/04/2020
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO
02 DATA DESC
03 SUBTITLE
04 DID NUMBER
E001
CERTIFICATION DATA/REPORTS
CERT. OF COMPLIANCE
DI-MISC-81356A
05 CONTRACT REF PARA. C.4.1
06 TECH OFFICE 136.2
07 DD 250 REQ DD
08 APP CODE
10 FREQUENCY 1-TIME
11 AS OF DATE
12 DATE 1ST SUBM WITH MATERIAL
13 DATE SUB SUBM
14 DISTRIBUTION 133.2
15 TOTAL 3
16 REMARKS 1.TECHNICAL CONTENT AS DESCRIBED IN THE RESPECTIVE CONTRACT LINE ITEM(S).
2.FOR PAYMENT & SUBMISSION OF DATA REFER TO CLAUSES 252.232-7006 & 252.232-
7003 OR 52.232-36. EACH DATA ITEM SUBMITTED BY VENDOR MUST BE SUBMITTED
UNDER A SEPARATE SHIPMENT NUMBER.
SEQ. NO. E001
PREPARED BY
APPROVED BY
DATE
DATE
DD FORM 1423
09 IAC INPUT
/2 0
Reviewed by:
Code: 245.2 Date: 11/4/2020
1/3
SPMYM327Q5008/SPMYM327P5008
5305 1FA EXHIBIT
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 11/04/2020
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO
02 DATA DESC
03 SUBTITLE
04 DID NUMBER
E002
MATERIAL CERTIFICATION
CERTIFICATION/DATA REPORT
DI-MISC-80678
05 CONTRACT REF PARA C.4.2
06 TECH OFFICE 136.2
07 DD 250 REQ
08 APP CODE
10 FREQUENCY 1-TIME
11 AS OF DATE
12 DATE 1ST SUBM
13 DATE SUB SUBM
14 DISTRIBUTION 133.2
15 TOTAL 3
16 REMARKS BLOCK 4 1.)PARAGRAPHS 10.2.2, 10.2.3 & 10.4 OF DI-MISC-80678 DO NOT APPLY.
2.)TECHNICAL CONTENT AS DESCRIBED IN THE RESPECTIVE CONTRACT LINE ITEM(S).
3.)THIS CERTIFICATION SHALL CONTAIN THE ACTUAL TEST RESULTS OF ALL CHEMICAL
& MECHANICAL TEST(S) REQUIRED BY THE SPECIFICATION
4.)THE TEST RESULT(S) SHALL BE QUANTITATIVE & IN THE UNITS REQUIRED BY THE
SPECIFICATION.
5.)FOR PAYMENT & SUBMISSION OF DATA REFER TO CLAUSES 252.232-7006 & 252.232-
7003 OR 52.232-36. EACH DATA ITEM SUBMITTED BY VENDOR MUST BE SUBMITTED
UNDER A SEPARATE SHIPMENT NUMBER.
6.)IN ADDITION TO THE CERTIFICATION DATA REQUIREMENTS SPECIFIED IN DI-MISC-
80678, THE REQUIREMENTS OF THE CONTRACT SECTION TITLED, “MARKING AND
CERTIFICATION REQUIREMENTS FOR CONTROLLED INDUSTRIAL MATERIAL” APPLY.
7.)FASTENER CERTIFICATION SHALL SHOW EVIDENCE OF TESTING OF THE CORRECT
NUMBER OF SPECIMENS, NEW UNTESTED FASTENERS ARE REQUIRED FOR EACH
TEST WHERE WEDGE TENSILE TESTING AND YIELD STRENGTH TESTING ARE
REQUIRED.
SEQ. NO. E002
PREPARED BY DATE
09 IAC INPUT
/1
SPMYM327Q5008/SPMYM327P5008
2/3
E
5305 1FA EXHIBIT
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 11/04/2020
CONTRACT DATA REQUIREMENTS LIST
APPROVED BY DATE
DD FORM 1423
SPMYM327Q5008/SPMYM327P5008 3/3
File details come from the government source that posted it. Updated .