Exhibit A.pdf
PDF 225 KB Posted
- Attached to
- Screws
- Solicitation number
- SPMYM327Q5008
About this file
This is a Contract Data Requirements List for the procurement of capscrews, specifying two required data items to be submitted by the contractor.
Data Item A001 requires submission of a Certificate of Compliance certifying quality compliance, referenced to DI-MISC-81356A and Section C.2 of the contract. The requiring office is Code 245, and submission must occur once with the material delivery. One final copy is required, with distribution code 133.2. Data Item A002 requires submission of Certification Data/Report documenting chemical and mechanical certification, referenced to DI-MISC-80678 and Section C.3 of the contract, also requiring submission once with material delivery and one final copy. For A002, paragraphs 10.2.2, 10.2.3, and 10.4 of DI-MISC-80678 do not apply. The certification must contain actual quantitative test results in specification-required units for all chemical and mechanical tests. The contractor must demonstrate testing of the correct number of specimens, with new untested fasteners required for wedge tensile and yield strength testing. Additionally, fastener certification must comply with the contract's "Marking and Certification requirements for Controlled Industrial Material" section. Both data items are submitted under separate shipment numbers with payment and submission governed by FAR Clauses 252.232-7006, 252.232-7003, or 52.232-36. The contract number is SPMYM327Q5008/27P5008, and the document was prepared by Stephen Young and approved by Code 245.2.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Exhibit C.pdf | ||
| Attachment 2.pdf | ||
| Attachment 3.pdf | ||
| Attachment 5.pdf | ||
| Exhibit D.pdf | ||
| Exhibit B.pdf | ||
| Combined Synopsis Solicitation 27Q5008.pdf | ||
| Exhibit E.pdf | ||
| Security Agreement For Protection of NNPI.pdf | ||
| Attachment 1.pdf | ||
| RFQ 27P5008.pdf | ||
| Attachment 4.pdf |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
CAPSCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-80678
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.
2. Technical content as described in the respective contract line item(s).
3. This certification shall contain the actual Test results of all Chemical
& Mechanical Test required by the Specification
4. The Test results shall be quantitative & in the units required by the specification.
5. For Payment & Submission of Data refer to Clauses 252.232-7006 &
252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
Stephen Young
SPMYM327Q5008/27P5008
| CONTRACT DATA REQUIREMENTS LIST 2 DATA ITEMS: |
| A CONTRACT LINE ITEM NO: |
| B EXHIBIT A: |
| undefined: |
| undefined_2: |
| C CATEGORY TDP TM OTHER: |
| D SYSTEMITEM CAPSCREW: |
| E CONTRACTPR NO: |
| F CONTRACTOR: |
| 6 REQUIRING OFFICE CODE 245: |
| 7 DD 250 REQ DD: |
| 8 APP CODE NA: |
| REPRO: |
| 9 DIST STATEMENT REQUIRED A: |
| 14 DISTRIBUTION: |
| 10 FREQUENCY One Time: |
| 12 DATE OF 1st SUBMISSION With Material: |
| a ADDRESSEE: |
| b COPIES: |
| DRAFT: |
| FINAL: |
| 0: |
| 1: |
| 0_2: |
| 133216 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number: |
| 133216 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number_2: |
| 016 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number: |
| 016 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number_2: |
| 016 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number_3: |
| 15 TOTAL: |
| 0_3: |
| 1_2: |
| 0_4: |
| 1DATA ITEM NO A002: |
| 3 SUBTITLE CHEMICAL MECHANICAL CERTIFICATION: |
| 4 AUTHORITY DIMISC80678: |
| 6 REQUIRING OFFICE CODE 245_2: |
| 7 DD 250 REQ DD_2: |
| 8 APP CODE NA_2: |
| 9 DIST STATEMENT REQUIRED A_2: |
| 10 FREQUENCY One Time_2: |
| 14 DISTRIBUTION_2: |
| a ADDRESSEE_2: |
| b COPIES_2: |
| FINAL_2: |
| DRAFT_2: |
| REPRO_2: |
| 0_5: |
| 1_3: |
| 0_6: |
| 133216 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply: |
| 133216 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply_2: |
| 016 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply: |
| 016 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply_2: |
| 016 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply_3: |
| 15 TOTAL_2: |
| 0_7: |
| 1_4: |
| 0_8: |
| G PREPARED BY: |
| H DATE: |
| J DATE: |
File details come from the government source that posted it. Updated .