Attachment 5.pdf
PDF 269 KB Posted
- Attached to
- Screws
- Solicitation number
- SPMYM327Q5008
About this file
This is a contract attachment specifying requirements for the manufacture and delivery of self-locking cap screws.
Item 0009 requires the production of cap screws, self-locking, nickel-aluminum (K-Monel), Type IV, conforming to Federal Specification FF-S-86E and MIL-STD Drawing MS18116. The screws must measure 0.500"-13UNC-3A x 1.375" long with classification "L" or "P" for the self-locking element per MIL-DTL-18240F(1). The material shall be nickel-copper-aluminum per QQ-N-286G, either hot-finished or cold-drawn, annealed, and age-hardened; fasteners made from Form 1 material require solution annealing subsequent to heading and threading before age hardening, while Form 2 material must have threads cut or ground only. The cap screws feature hexagon socket, flat countersunk heads at 82 degrees and require a minimum of six dots approximately 0.032 inches in diameter, raised or depressed approximately 0.010 inches, placed on the fastener head. No protective coating or cross-drilling is required. The stock number is 5305-LL-DM1-2006 with SMIC classification 5F. Data requirements include Certificate of Compliance (Exhibit A, Sequence A001) and Certificate of Material/Data (Exhibit A, Sequence A002) for cap screws 1/2" diameter and larger only. Additional requirements address K-Monel material restrictions, commercial packaging for delivery, fastener packaging standards, and destination inspection and acceptance procedures with a constructive acceptance notice period.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Exhibit A.pdf | ||
| Exhibit C.pdf | ||
| Attachment 2.pdf | ||
| Attachment 3.pdf | ||
| Exhibit D.pdf | ||
| Exhibit B.pdf | ||
| Combined Synopsis Solicitation 27Q5008.pdf | ||
| Exhibit E.pdf | ||
| Security Agreement For Protection of NNPI.pdf | ||
| Attachment 1.pdf | ||
| RFQ 27P5008.pdf | ||
| Attachment 4.pdf |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT
PRINTED 11/04/2020 ATTACHMENT PAGE
5305 1FA
C DESCRIPTION/SPECIFICATIONS
C.1 MANUFACTURE CAP SCREWS IN ACCORDANCE WITH FED-SPEC. FF-S-86E
AND MIL-STD DRAWING MS18116. PARAGRAPH 6.2 (ORDERING DATA):
(A) "SCREW, CAP, SOCKET-HEAD", FF-S-86E OF MAY 29, 1987 AND
NOTICE 2 OF 22 FEB 02.
(B) TYPE IV (HEXAGON SOCKET, FLAT COUNTERSUNK HEAD, 82 DEG. ANGLE)
NICUAL. SIZE AN LENGTH AS SPECIFIED IN SECTION B OF THIS
SCHEDULE.
(C) MILITARY STANDARD (PART NUMBER) NOT APPLICABLE.
(D) MATERIAL TO BE NICKEL COPPER ALUMINUM IN ACCORDANCE WITH
QQ-N-286G, HOT FINISHED OR COLD DRAWN, ANNEALED AND AGE HARDENED.
FASTENERS MADE FROM QQ-N-286G FORM 1 MATERIAL SHALL BE SOLUTION ANNEALED
SUBSEQUENT TO HEADING AND THREADING, AND THEN AGE HARDENED. FASTENERS MADE FROM
QQ-N-286G FORM 2 MATERIAL SHALL HAVE THREADS CUT OR GROUND ONLY.
MATERIAL CERTIFICATION AS REQUIRED PER PARA. C.4.2 OF THIS
SCHEDULE.
NOTE: ONE HEAT IS REQUIRED FOR QUANTITIES OF 50 AND UNDER.
(E) PROTECTIVE COATING NOT REQUIRED.
(F) CROSS DRILLING OF HEAD NOT REQUIRED.
(G) THREAD SERIES AND CLASS OF FIT TO BE AS SPECIFIED IN SECTION
B OF THIS SCHEDULE.
C.2 SELF LOCKING ELEMENT SHALL BE IN ACCORDANCE WITH MIL-DTL-18240F(1) .
CLASSIFICATION TYPE SHALL BE AS SPECIFIED IN SECT. B OF THIS
SCHEDULE.
C.3 A MINIMUM OF SIX (6) DOTS APPROXIMATELY .032 INCHES IN DIAMETER
RAISED OR DEPRESSED APPROXIMATELY .010 INCHES ARE TO BE PLACED
ON THE HEAD OF THE FASTENER. (TOP PREFERRED OR SIDE LOCATION IF
NECESSARY DUE TO CONFIGURATION.)
C.4 DATA REQUIREMENTS:
C.4.1 CERT. OF COMPLIANCE., SEE EXHIBIT A, SEQUENCE A001
(APPLIES TO CAP SCREWS 1/2" DIAMETER AND LARGER ONLY)
C.4.2 CERT. OF MATERIAL/DATA., SEE EXHIBIT A, SEQUENCE A002
C.5 C524 MARKING & CERTIFICATION REQMNTS FOR CONTROLLED INDUSTRL MATL
(APPLIES TO CAP SCREWS 1/2" DIAMETER AND LARGER ONLY)
C.6 C500 MERCURY CONTROL (SUPPLIES)
ITEM NO.
STOCK NUMBER
5305-LL-DM1-2006
SPECIAL CHARACTERISTICS
0.500"-13UNC-3A X 1.375" LONG
CLASSIFICATION "L" OR "P"
ITEM NAME CAP SCREW, SLFLKG, NICUAL(K-MONEL), TYPE IV, FF-S-86E
SECTION B
SMIC
5F
SPMYM327Q5008/SPMYM327P5008
5 1/2 michael.cruver
LEVEL 1
CONTRACT
PRINTED 11/04/2020 ATTACHMENT PAGE
5305 1FA
C.7 C531 RESTRICTIONS ON K-MONEL MATERIAL
D PRESERVATION/PACKAGING/PACKING
D.1 D4 PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)
D.2 D5 FASTENER PACKAGING REQUIREMENTS
E INSPECTION ACCEPTANCE
E.1 E1 RESPONSIBILITY FOR INSPECTION
E.2 E2 INSPECTION AND ACCEPTANCE (DESTINATION)
E.3 E504 NOTICE OF CONSTRUCTIVE ACCEPTANCE PERIOD
H SPECIAL PROVISIONS
K Section
L Section
M Section
Reviewed by:
Code:245.2 Date: 11/4/2020
1/2
SPMYM327Q5008/SPMYM327P5008
File details come from the government source that posted it. Updated .