Attachment 3.pdf
PDF 138 KB Posted
- Attached to
- Screws
- Solicitation number
- SPMYM327Q5008
About this file
This document is a contract specification attachment detailing requirements for a socket flat head self-locking capscrew under Federal Supply Classification (FSC) 5305. The item is identified as Stock Number 5305-LL-D00-0347 and is designated as CMMC Level 1 material. The specification requires the fastener to conform to FF-S-86J (MOD) Type IV standard with self-locking capability in accordance with MIL-DTL-18240F(1), Type L or P. Material must be Nicual per QQ-N-286G, Grade 500, annealed and age hardened, with dimensions of 0.500-13UNC-2A X 2.125. A critical modification to the standard requires all fastener heads to be marked with lot numbers.
The contract specifies two contractor-deliverable requirements: a Certificate of Compliance (CDRL DI-MISC-81356A) and a Certification/Data Report (CDRL DI-MISC-82386). Applicable PNS Standard Clauses include C500 (Mercury Exclusion), C524 (Marking & Certification Requirements), and C531 (Restrictions on K-Monel Material). Standard commercial packaging applies per Section D. Inspection and acceptance shall occur at destination in accordance with FAR 52.246-1, with Section H500 (Special Provisions for Threaded Products) also applicable. The material is classified as non-Level 1 in Section G.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Exhibit A.pdf | ||
| Exhibit C.pdf | ||
| Attachment 2.pdf | ||
| Attachment 5.pdf | ||
| Exhibit D.pdf | ||
| Exhibit B.pdf | ||
| Combined Synopsis Solicitation 27Q5008.pdf | ||
| Exhibit E.pdf | ||
| Security Agreement For Protection of NNPI.pdf | ||
| Attachment 1.pdf | ||
| RFQ 27P5008.pdf | ||
| Attachment 4.pdf |
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Page 1Contract SPMYM327Q5008/SPMYM327P5008
Attachment 3
Section "B"
FSC 5305
Stock Number: 5305-LL-D00-0347
Item Name: SOCKET FLAT HEAD SELF-LOCKING CAPSCREW
Section "C"
C.1: SOCKET FLAT HEAD SELF-LOCKING CAPSCREW. FF-S-86J (MOD) TY-IV. SELF-LOCKING IAW
MIL-DTL-18240F(1), TYPE L OR P. NICUAL, QQ-N-286G, GRADE 500, ANNEALED & AGE
HARDENED. 0.500-13UNC-2A X 2.125. NOTE: MOD TO FF-S-86J IS THE ADDITION OF A “LOT
NUMBER” IS REQUIRED TO BE MARKED ON THE HEADS OF ALL FASTENERS.
C.2 See Exhibit "A" Seq A001: CDRL DI-MISC-81356A (Certificate of Compliance).
C.3 See Exhibit "A" Seq. A002: CDRL DI-MISC-82386 (Certification / Data Report).
C.4 PNS Standard Clauses C500 (Mercury Exclusion), C524 (Marking & Certification Requirements) & C531
(Restrictions on K-Monel Material) Apply.
Section "D"
D2.2 STANDARD COMMERCIAL PRACTICE (COMMERCIAL PACKAGING) APPLIES.
Section "E"
PNS STANDARD FAR 52.246-1 CLAUSE (CONTRACTOR INSPECTION REQUIREMENTS),
E-2 (INSPECTION & ACCEPTANCE - DESTINATION) & E504 (NOTICE OF CONSTRUCTIVE
ACCEPTANCE PERIOD) APPLY.
Section "G"
NON LEVEL-1 MAT'L
Section "H"
STANDARD CLAUSE H500 (SPECIAL PROVISIONS FOR THREADED PRODUCTS) APPLIES.
michael.cruver
LEVEL 1
| Contract: |
| Attachment: |
File details come from the government source that posted it. Updated .