Attachment 2.pdf

This document is an attachment to a federal contract specification for a socket head cap screw component. The contract is identified as SPMYM327Q5008/SPMYM327P5008, with Stock Number 5305-LL-D00-0249.

The required product is a socket head cap screw conforming to Federal Specification FF-S-86J, Type VI, with specific dimensions of 0.3125-18UNC-3A X 1.500 inches. The material must be nickel aluminum (NICUAL) per QQ-N-286G standard, annealed and age hardened, with the head drilled for lockwire installation in accordance with FF-S-86J Table 1. The specification notes that NICUAL material that has been headed or roll threaded shall not be age hardened unless it has been solution annealed subsequent to the heading and threading operations, and threads formed after final age hardening heat treatment shall be cut or ground only. The item has a CMMC Level 1 classification requirement. Compliance documentation must include a Certificate of Compliance (CDRL DI-MISC-81356A) and Certification/Data Report (CDRL DI-MISC-80678). Standard commercial packaging applies, and contractor inspection requirements, inspection and acceptance at destination, and notice of constructive acceptance period clauses apply. The material classification is non-Level 1, and Standard Clause H500 for special provisions for threaded products applies.