SPECS 44PRO~1.pdf

44 PRO-E

HIGH TEMPERATURE ELECTRIC RACK CONVEYOR

PROJECT:

ITEM # QTY:

MODEL #

AIA # SIS #

In the USA:

3765 Champion Blvd, Winston-Salem, NC 27105 Tel: (336) 661-1556 Fax: (336) 661-1979 www.championindustries.com

In Canada:

2674 N. Service Rd., Jordan Station, Ontario, Canada L0R1S0 Tel: (905) 562-4195 Fax: (905) 562-4618 www.championindustries.com/1canada

Rev. 12/2025 Printed in U.S.A. APPROVAL: DATE:

SPECIFIER STATEMENT

Specified unit will be Champion model 44 PRO Series high temperature rack conveyor dishwashing machine. Features top mounted prodigy HMI user interface controls with proactive maintenance software, proportional rinse, using only 100 GPH, optional built-in 21kW booster, progressive anti-jam drive system, energy sentinel (idle pump shut-off), 209 racks per hour, single-piece hood design, single-piece stainless steel upper & lower wash arms manifolds, full 180° opening leak proof insulated hinged access doors.

1 Year parts and labor warranty.

Rendered image is for general visual representation only. Please refer to specifications for the latest detailed product information.

STANDARD FEATURES

• Perpetual Rack Advance System with digital jam monitoring, and mechanical drive protection

• Automated Delime Function with user-customizable alert intervals

intuitive condition alerts, with user friendly cleaning and operation visual guidance, multi-lingual

• Enhanced Visual On-board Diagnostics quickly identify machine faults for rapid resolution and less downtime

pauses rack in wash zone for extended cleaning, NSF Certified Pot & Pan Mode

more robust and faster cleaning

• Single-Piece Stainless Steel Upper And Lower Wash Arm

Manifolds

accommodates 18” x 26” sheet pans

• Fully Insulated Doors open a full 180° for unrestricted cleaning access

• All Stainless Steel Heavy Gauge Construction including base, legs and feet

OPTIONS

o Two-point electrical connection, separate for machine and booster (field convertible) o 33” Blower dryer – electric o Booster heaters (completely interplumbed, controls are interwired)

o Direct link connectivity solution o Direct link plus+ connectivity solution

PRO-90B

90° Corner Conveyor table loader and unloader available

Cantilever Sideloader (no hood)

Model RCT 64 or RCT 84 Roller conveyor table

ACCESSORIES

o Drain water tempering kit (unmounted) o Table limit switch, unmounted (recommended on all rack conveyor installations) (unmounted)

o Vent cowl, stainless steel with 7” stacks & locking dampers o Extended vent cowl, with 7” stacks, locking dampers & external curtain o Flanged feet (unmounted) o Water hammer kit (unmounted) o Chemical pump kit (detergent and rinse aid, mounted and interwired) o Water pressure regulating valve (unmounted; standard with booster) o ION scale prevention device (unmounted) o Water softening system (manufactured, warrantied and serviced by Kinetico) o Dish racks:

o Splash shields o Cantilever sideloader (without hood) for 90° load operation

o Model PRO-90B unloader (90° corner conveyor table) o Model PRO-90B loader (90° corner conveyor table) o Model RCT 64 or RCT 84 roller conveyor table

(see factory for custom length) o Stainless steel rear enclosure panels o Correctional package (contact factory)

Rev. 12/2025 Printed in U.S.A. Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

In the USA: 3765 Champion Blvd, Winston-Salem, NC 27105 | Tel: (336) 661-1556 Fax: (336) 661-1979 | www.championindustries.com

In Canada: 2674 N. Service Rd., Jordan Station, Ontario, Canada L0R1S0 | Tel: (905) 562-4195 Fax: (905) 562-4618 | www.championindustries.com/1canada

Machines with a single point electrical connection:

44 PRO Electric Tank Heat, 21 kW 70° Booster

Elec.

Specs

Rated Amps

Minimum Supply Ckt.

Conductor Ampacity

Maximum Overcurrent Protective Device

208/60/3 111 150 150 240/60/3 96 125 125 480/60/3 47 60 60 575/60/3 40 50 50

44 PRO Electric Tank Heat, 12 kW 40° Booster Elec.

Specs

Rated Amps

Minimum Supply Ckt.

Conductor Ampacity

Maximum Overcurrent Protective Device

208/60/3 85 110 110 240/60/3 74 100 100 480/60/3 36 50 50 575/60/3 31 40 40

44 PRO Electric Tank Heat, No Booster Elec.

Specs

Rated Amps

Minimum Supply Ckt.

Conductor Ampacity

Maximum Overcurrent Protective Device

208/60/3 52 70 70 240/60/3 45 60 60 480/60/3 22 30 30 575/60/3 19 25 25

Machines with a dual point electrical connection:

44 PRO Electric, 21 kW Booster Only

Elec.

Specs

Rated Amps

Minimum Supply Ckt.

Conductor Ampacity

Maximum Overcurrent Protective Device

208/60/3 59 80 80 240/60/3 51 70 70 480/60/3 26 35 35 575/60/3 22 30 30

44 PRO Electric, 12 kW Booster Only Elec.

Specs

Rated Amps

Minimum Supply Ckt.

Conductor Ampacity

Maximum Overcurrent Protective Device

208/60/3 34 45 45 240/60/3 29 40 40 480/60/3 15 20 20 575/60/3 12 15 15

Note:

Machine ships as a single point electrical connection standard.

Easily converted to a dual point connection by a qualified electrician.

The machine ships standard with a 70°F booster when a booster is specified, but it is field convertible to a 40°F rise. See the installation packet or manual for conversion instructions.

Warning: Plumbing and electrical connections should be made by qualified personnel who will observe all the applicable plumbing, sanitary, and safety codes and the National Electrical Code.

Note: Water Hammer Arrestor (meeting ASSE-1010 standard or equivalent) to be supplied (by others) in common water supply line at service connection.

Plumbing Notes: Because of the variation in house-supplied steam and water pressures, steam and water pressure regulating valves (PRVs) may be needed. (Water PRV is standard on machines with booster.) The PRVs can either be purchased from Champion or obtained locally.

Champion does not endorse using on-demand (tankless) water heating systems, as well as PEX and other plumbing materials that may limit water flow, as these could impair machine performance. For optimal results, we recommend using appropriately sized conventional hot water tanks and standard copper water supply lines that adhere to our specifications. Not following these recommendations may void the manufacturer’s warranty.

Water hardness of 3 grains/US Gal (0.83 Imp Gal) - 5.3 Mg/L or less

Venting Notes: Fabricated duct size: 3-7/8” x 15-7/8” (outside dimensions) Optional Drain Tempering: 1/2” NPT cold water connection required. 1/2” NPT drain connection from back flow preventer to house drain. (FIELD INSTALLED and

PLUMBED).

SPECIFICATIONS

Capacity

Racks per hr (NSF rated) 209 Wash tank (US gal.) 17 Conveyor speed (ft/min) 5.8 Conveyor speed Pot/Pan Mode (ft/min) (only one rack at a time in pot/pan) 4.5

Motor Horsepower

Drive 1/6 Wash 2

Water Consumption

US Gal. per hr (max. use) 100 US Gal. per rack 0.48

Heating

Tank Heat, electric (kW) 15 Electric booster (built-in) (kW supplied for 40°F rise) 12 Electric booster (built-in) (kW supplied for 70°F rise) 21 Booster heaters completely inter plumbed, controls are interwired.

Venting

Load end (minimum CFM) 200 Unload end (minimum CFM) 400

Standard 20”x 20” Rack Complement

Peg 1 Flat 1

UTILITIES

1 Electrical Connections

Machine electrical connection and booster electrical connection 2 Hot Water

25 PSI flowing pressure (machine with built-in booster) Main connection 1/2” NPT with 110° incoming water (Initial Fill = 17 Gal)

4 Hot Water 20 PSI flowing pressure (machine with no booster) Main connection 1/2” NPT with 180° incoming water (Initial Fill = 17 Gal)

5A Drain Connection 1-1/4” NPT Drain Max Flow Rate (g/min) 15

8 Vents A Stack connection – load end 200 CFM @ 1/4” static pressure B Stack connection – unload end 400 CFM @ 1/4” static pressure

Rev. 12/2025 Printed in U.S.A. Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

In the USA: 3765 Champion Blvd, Winston-Salem, NC 27105 | Tel: (336) 661-1556 Fax: (336) 661-1979 | www.championindustries.com

In Canada: 2674 N. Service Rd., Jordan Station, Ontario, Canada L0R1S0 | Tel: (905) 562-4195 Fax: (905) 562-4618 | www.championindustries.com/1canada

44 PRO-E

HIGH TEMPERATURE ELECTRIC RACK CONVEYOR

Single Tank PRO Rack Machine and Booster Ratings The tables below give the ratings for each model. The ratings include the requirements of the 12 and 21 kW booster heaters when they are in use.

Rev. 12/2025 Printed in U.S.A. Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

In the USA: 3765 Champion Blvd, Winston-Salem, NC 27105 | Tel: (336) 661-1556 Fax: (336) 661-1979 | www.championindustries.com

In Canada: 2674 N. Service Rd., Jordan Station, Ontario, Canada L0R1S0 | Tel: (905) 562-4195 Fax: (905) 562-4618 | www.championindustries.com/1canada

Shipping weight crated: 600 lbs. Dimensions shown in inches

Front View: Left to Right Model

Plan View: Left to Right Model

End View

Plan View: Right to Left Model

Suggested Table Construction Flange Details

Front View: Right to Left Model