CL44.pdf

Approved by_______________________________________ Date____________ Approved by_______________________________________ Date____________

CL44-ADV

ELECTRIC

High Temperature Rack Conveyor Dishwashing Machine

Printed in U.S.A. HOBART • 701 S Ridge Avenue, Troy, OH 45373 • 1-888-4HOBART • www.hobartcorp.com F48852 (12/24) Page 1 of 4

CL SERIES – CL44-ADV

ELECTRIC

COM

M

ERCIAL

DISHW

ASHERS

Project______________________________________________________________________

AIA #__________________________________ SIS #_________________________________

Item #_________________________________ Quantity_ ______ C.S.I. Section 114000

SPECIFIER STATEMENT

Specified dishwasher will be Hobart CL44 Advan-sys electric tank heat model. Features include Drain Water Energy Recovery (DWER), Automatic Soil Removal (ASR), Complete Delime™ with Delime Notification, Auto Dispensing and Booster Guard™, capless anti-clogging wash arms, 202 racks per hour, 90 gallons per hour pumped final rinse, ENERGY STAR®, insulated ergonomic cabinet style doors, touchscreen controls with WiFi connectivity, and NSF approved pot and pan cycle mode. The wash tank utilizes durable precision pressure sensor monitors in lieu of conventional mechanical floats. The 19.5" standard chamber height will accommodate up to

(6) standard sheet pans at a time on an open-end sheet pan rack.

STANDARD FEATURES

and Booster Guard™

+ Internal stainless steel pressure-less 18 kW booster heater (70°F rise)

troubleshooting

logs, error code reporting, and cost, consumption and usage analysis

OPTIONS & ACCESSORIES (Available at extra cost)

for more details

❑ Side loader – SL23 adds 23" length, SL30 adds 30" length;

Reference specs F40926 and F40927 for more details

❑ Blower-dryer – adds 331⁄4" to length; Reference spec F48945 (electric blower-dryer) and F48950 (steam blower-dryer) for more details (ships separate from dishmachine, contact Hobart Service for installation)

Page 2 of 4 CL44-ADV ELECTRICCAD and/or Revit Files Available

CL44-ADV ELECTRIC

High Temperature Rack Conveyor

Dishwashing Machine

V1V1

P2 P3 E3 E2 E1

E3 E2 E1P1

P2 P3

P1 P1

12"

3" 1"

13"

19"

40"

38"

20"

SERVICE

CLEARANCE

(BOTH SIDES)

23"

FRONT SERVICE

CLEARANCE

V1V1

E1 E2 E3

E3 E2 E1P1

P3 P2

P2 P3 P1 P1

12"

1" 13" 18"

38"

20"

SERVICE

CLEARANCE

(BOTH SIDES)

23"

FRONT SERVICE

CLEARANCE

41"

R-L OPER

65-1/2" 58-1/2"

8-7/8"

68-1/2"

63-1/2" 53-1/2"

5"

34"

TABLE

HEIGHT

43-1/2"

CHAMBER WIDTH

6" 6-1/4"L-R OPER

65-1/2"

58-1/2"

8-7/8"

68-1/2"

63-1/2"

43-1/2"

CHAMBER WIDTH

53-1/2" 5"

34"

TABLE

HEIGHT

6"6-1/4"

30-7/8"

19-11/16"

CHAMBER

OPENING

WALL

24-7/8"

CHAMBER WIDTH

22"

CHAMBER OPENING

C L

5" MINIMUM

FROM BACK

OF CHAMBER

MODEL:

CL44 ADVANSYS

L-R OPERATION

00-563920

REV A

MODEL:

CL44eN ADVANSYS

R-L OPERATION

00-563930

REV A

Top View Left to Right Machine Top View Right to Left Machine

Front View Left to Right Machine Front View Right to Left Machine

Side View https://hobart.kclcad.com/

CL44-ADV ELECTRIC Page 3 of 4

High Temperature Rack Conveyor

Dishwashing Machine

E1 Single Point Electrical Connection with Internal Booster

Voltage

(E1) Motors, Controls, Tank Heat, 18 kW Booster Heater

Rated Amps

Minimum Supply Circuit Ampacity/

Maximum Protective Device

208/60/3 109.6 150 240/60/3 99.9 125 480/60/3 51.7 60 600/60/3 39.1 50

E2 Dual Point Electrical Connection with Internal Booster (Field Conversion Only)E3

Voltage

(E2) Motors, Tank Heat (E3) Controls, 18 kW Booster Heater

Rated Amps

Minimum Supply Circuit Ampacity/

Maximum Protective Device

Rated Amps

Minimum Supply Circuit Ampacity/

Maximum Protective Device

208/60/3 51.1 70 58.5 80 240/60/3 48.1 60 51.8 70 480/60/3 24.5 30 27.2 35 600/60/3 16.7 20 22.4 30

WARNING: Electrical and grounding connections must comply with the applicable portions of the National Electrical Code and/or other local electrical codes.

CAUTION: Certain materials including silver, aluminum, and pewter are attacked by sodium hypochlorite (liquid bleach).

ATTN: Plumbing connections must comply with applicable sanitary, safety and plumbing codes.

SPECIFICATIONS

Capacities

Motor Horsepower

Water Consumption

Heating

Venting

Shipping Weight (approximate) . . . . . . . . . . . . . . . . . . . . . . . 725 lbs.

Crated Dimensions. . . . . . . . . . . . . . . . . . . . . . . . 59"L x 38"W x 79"H

LEGEND

Electrical Connections

SINGLE POINT CONNECTION

E1 Electric connection, single point: motors, controls, tank heat, with 18 kW electric booster heater, 65" AFF.

DUAL POINT CONNECTION WITH BOOSTER

E2 Electric connection: motors, tank heat, 62" AFF.

E3 Electric connection: controls, 18kW booster heater, 65" AFF.

Plumbing Connections

P1 Drain: 2" FPT, 7-3/8" AFF, two possible connections;

may be drained to either side of drain housing, plug opposite side.

P2 Hot water connection: 1/2" FPT, 12" AFF, 18kW booster, 110°F minimum.

P3 Cold water connection: 1/2" FPT, 12" AFF, 55°F minimum and 80°F maximum.

Vent Connections

V1 Optional vent hoods: 4" x 16" vent stack with damper.

Load end 200 CFM, unload end 400 CFM.

High Temperature Rack Conveyor

Dishwashing Machine

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

F48852 (12/24) Page 4 of 4 HOBART • 701 S Ridge Avenue, Troy, OH 45373 • 1-888-4HOBART • www.hobartcorp.com Printed in U.S.A.

VENT HOOD OPTIONS (Adjustable, vent stack can be adjusted 1" to either side)

Standard Short Extended

CL44-ADV Electric Heat Dissipation

Booster

BTU/HR.

Latent Sensible 18kW Booster 32,100 13,700

NOTE: Additional Voltages and Amperages are available, see document F48913.

Plumbing Notes: Water hammer arrestor (meeting ASSE-1010 standard or equivalent) to be supplied (by others) in common water supply line at service connection.

Recommended water hardness to be 3 grains or less for best results.

110°F minimum incoming hot water temperature.

Building flowing water pressure to dish machine is 20 to 65 PSI at the machine.

For convenience when cleaning, water tap should be installed near machine with heavy duty hose and squeeze valve.

Miscellaneous Notes: All dimensions taken from floor line may be increased approximately 3/4" or decreased 1/2".

For HTS, add 4-5/16" to all dimensions above table line.

For HTS, add 15 lbs. to the domestic shipping weight of each model.

For optimal performance, Hobart recommends maintaining a dishroom temperature of 65°F (18°C) or higher, as lower temperatures may hinder the machine's capacity to operate effectively (with lower performance as ambient temperature decreases).

Electrical Note: Dishmachine not provided with internal GFCI protection.

Suggested Track and Table Layout View Showing Hole Locations in Turned Down Portion of Table

Sectional View Showing Table Connections

TABLE CONNECTION DETAILS

Tabling Connection: 44" inside tank (at table connection)

20"

WIDTH OF

TRACKS

24-7/8"

CHAMBER

WIDTH

26-1/2"

AVG INSIDE

TABLE WIDTH

11"

CL 7/8" REF

USE SILICON BETWEEN

TABLE AND LIP OF TANK

TO PREVENT LEAKAGE

2 X 7/8"

HOLES FOR BOLTING

TABLE TO TANK

FRONT OF

MACHINE

CL

3"

10-1/2" REF

22"

CHAMBER OPENING

3"

4 3/4"

OUTSIDE

11 1/4"

OUTSIDE

REF

10" 10"

4 3/4"

OUTSIDE

5 3/4"

OUTSIDE

REF

10"

4 3/4"

OUTSIDE

20 1/2"

OUTSIDE

REF