Special Packaging Instructions.pdf
PDF 896 KB Posted
- Attached to
- B-1B Power Take-Off (PTO) Shaft Repair IDIQ
- Solicitation number
- FA825226R0613
About this file
This is a Special Packaging Instruction (SPI) document that establishes packaging requirements for a shaft turbine nonaircraft gas turbine engine (Part Number 19E235-2A, National Stock Number 2835-01-115-6111 RP).
The document specifies two packaging levels. Level A packaging uses ASTM D6251 containers with dimensions of 29 3/4" x 8 3/4" x 9" and a gross capacity of 2,292 cubic feet and 20 gross weight pounds, designed for the most severe worldwide shipment, handling, and storage conditions including war reserve material, mobilization, strategic and theater deployment, and open storage. Level B packaging uses ASTM D5118 containers with dimensions of 29" x 8" x 8" and a gross capacity of 1,246 cubic feet and 9 gross weight pounds for standard conditions. The document mandates military preservation per IAW MIL-STD-2073-1, cleaning and drying procedures, and marking requirements per IAW MIL-STD-129. The item itself weighs 6 pounds with dimensions of 24" x 5" x 5". All wooden packaging materials must be heat-treated to 56 degrees Centigrade for 30 minutes and debarked in compliance with International Standards for Phytosanitary Measures (ISPM No. 15). Packaging materials include wrap/cushioning, masking tape, cushioning, and paperback tape; filament tape and blade opening are explicitly prohibited. The document is controlled by 406 SCMS at Gulla-Hill AFB with distribution controlled as FEDCON, and has undergone revisions including dimension changes and the addition of notes.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| QASP.pdf | ||
| Ombudsman.pdf | ||
| GFPFA8252R0613_1 Year 1.pdf | ||
| IUID.pdf | ||
| RDL_REPORT.pdf | ||
| ITMDESC_REPORT.pdf | ||
| Quality Assurance Special Instructions.pdf | ||
| CDRL_A005.pdf | ||
| FA825226R0613.pdf | ||
| PWS.pdf | ||
| CDRL B1 PTO.pdf | ||
| CAV AF Reporting Requirements.pdf | ||
| PKGRQMT_REPORT.pdf |
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTROLLED BY: 406 SCMS
CONTROLLED BY: GULAA-HILL AFB
CONTROLLED BY: CUI/SP-CTI
DISTRIBUTION/DISSEMINATION CONTROL: FEDCON
POC: 406SCMS.GULAA.CONTRACTSHILL@US.AF.MIL
CUI
CAUTION NOTICES
NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH THE PREVIOUS EDITION OF THIS SPI DO NOT REQUIRE
REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.
NOTICE 4: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED
CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.
NOTICE 5: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
NOTES
1. CONDITION A ITEMS SHOULD NOT BE OPENED UNTIL READY FOR USE.
2. USE WRAP/CUSHIONING, REF.-4, TO PROTECT ITEM AND SECURE WITH MASKING TAPE ONLY, REF.-5.
3. IF NEEDED USE EXTRA CUSHIONING, REF.-6, TO FILL ANY VOID AND ENSURE A SNUG FIT.
4. SEAL CONTAINER USING TAPE, REF.-7.
5. DO NOT USE FILAMENT TAPE
6. DO NOT USE BLADES TO OPEN
File details come from the government source that posted it. Updated .