IUID.pdf
PDF 62 KB Posted
- Attached to
- B-1B Power Take-Off (PTO) Shaft Repair IDIQ
- Solicitation number
- FA825226R0613
About this file
This is an Item Unique Identification (IUID) Checklist document for a turbine shaft component subject to DFARS 252.211.7003 requirements. The document specifies marking and identification requirements for NSN 2835015373778RP, Version 2, identified as a non-aircraft turbine shaft (SHAFT, TURBINE, NONAI).
The marking requirements mandate compliance with the latest version of MIL-STD-130. The item requires marking using a Data Label affixed via Tesa Tape methodology, consistent with current Technical Order 2JA5-18-2. The marking is to be applied to the power take-off (PTO) shaft per the specifications outlined in attachment pages from Technical Order 2JA5-18-2 Work Package 006. The document was generated by the PRPS system on 27 May 2025, initiated by Taylor D. Olpin from the 419 SCMS / GUEA organization. The embedded items section of the checklist contains no populated entries. This checklist serves as the contractual requirement specification for ensuring proper identification and traceability of the identified turbine shaft component throughout its lifecycle.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| QASP.pdf | ||
| Ombudsman.pdf | ||
| GFPFA8252R0613_1 Year 1.pdf | ||
| Special Packaging Instructions.pdf | ||
| RDL_REPORT.pdf | ||
| ITMDESC_REPORT.pdf | ||
| Quality Assurance Special Instructions.pdf | ||
| CDRL_A005.pdf | ||
| FA825226R0613.pdf | ||
| PWS.pdf | ||
| CDRL B1 PTO.pdf | ||
| CAV AF Reporting Requirements.pdf | ||
| PKGRQMT_REPORT.pdf |
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST
I. IUID DETAILS: DFARS 252.211.7003
SECTION (c) (1) (ii) APPLIES TO THE FOLLOWING:
ITEM REQUIRING IUID MARKING
NSN
2835015373778RP
VERSION NUMBER
NOUN
SHAFT,TURBINE,NONAI
INITIATOR
Olpin, Taylor D
ORGANIZATION CODE / OFFICE SYMBOL
419 SCMS / GUEA
COMMERCIAL PHONE
801-775-2073
DSN PHONE
775-2073
CAGE / REFERENCE NUMBER
MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130
MARKING GUIDANCE
Recommended Marking Instruction
ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE
Data Label
MARKING METHOD
Tesa Tape
DESCRIPTION / LOCATION
Currently per Tech Order 2JA5-18-2, PTO shaft is marked with Tesa Tape label per attachment. Engineering recommends continuation of marking with the same methodology as currently exists in the T.O.
REMARKS
ATTACHMENT(S)
Pages from 2JA5-18-2 WP 006.pdf
II. EMBEDDED ITEMS
SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:
NSN NOUN
CAGE / REFERENCE NUMBER
ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 2835015373778RP
MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER
MARKING TYPE MARKING METHOD
DESCRIPTION / LOCATION
REMARKS
ATTACHMENT(S)
Page 1 of 1IUID Version 2Generated by PRPS using Jasper Reports on 27 May 2025
File details come from the government source that posted it. Updated .