Updated_Active_NSN_PID_Data_(SPE4A615R0340).txt

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN

NSN: 8120000071410

ADAPTER,COMPRESSED GAS CYLINDER VALVE CONNECTION

UNIT EACH

DWG 543AS300 CAGE 30003. SOURCE CONTROL DWG

REFERENCE NUMBER: ZD025

REFERENCE NUMBER: Q0106

APPROVED SOURCES OF SUPPLY:

WESTERN ENTERPRISES DIV OF SCOTT 16166 P/N ASSEMBLY 615-PT/615-3/692/417-1

SPECS/STD/DRAWINGS:

I/A/W DRAWING NR 30003 543AS300

BASIC DTD 09 FEB 24

AMEND NR DTD 71 MAR 11

TYPE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = D3: OPI = O:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = Q: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

NSN: 6830000529918

HYDROGEN-ARGON

UNIT CYLINDER CONTAINS 230 CU FT GAS

ARGON: 65.0 PERCENT BY VOLUME

HYDROGEN: 35.0 PERCENT BY VOLUME

SHIPPING NAME: COMPRESSED GAS, FLAMMABLE, N.O.S.

HAZARD CLASS: 2.1

UN NUMBER: UN1954

GFM CYLINDER: 8120-01-523-1631.

ADDIT'L PALLETIZATION & PACKING REQ'TS

MSDS

REFERENCE NUMBER: A0274

REFERENCE NUMBER: A1036

REFERENCE NUMBER: ZD072

REFERENCE NUMBER: Q0106

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD AWSA5.32

BASIC DTD 10 NOV 09

AMEND NR DTD 10 NOV 09

LINE ITEM 00002 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = HM: CLNG/DRY = X: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = ZZ: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

PACKAGE IAW D.O.T FOR DOMESTIC

SHIPMENTS. DOMESTIC SHIPMENTS SHALL BE

MARKED & LABELED IAW D.O.T & MIL-STD-129.

EXPORT SHIPMENTS SHALL BE IAW U.N. INTER-

NATIONAL REQ. & MIL-STD-129.

REFERENCE NUMBER: 00004

NSN: 6830000602793

ARGON-METHANE

GAS MIXTURE

HAZARD CLASS: 2.2

SHIPPING NAME: COMPRESSED GAS, N.O.S.

I.D. NO. UN1956

MULTIPLE 'UN' NUMBERS MAY APPLY TO A MATERIAL;

MANUFACTURER IS RESPONSIBLE TO SELECT THE MOST

APPLICABLE 'UN' NUMBER IAW CFR 49.

90% MINIMUM BY VOLUME ARGON

10% MINIMUM BY VOLUME METHANE

UNIT CYLINDER CONTAINS 240 CU FT

CYLINDER IS 9" X 51" (NOMINAL), US DOT

3AA2015.

WITH VALVE CONFORMING TO THE CURRENT ISSUE OF COMMERCIAL ITEM

DESCRIPTION A-A-59860, PIN AA59860-133

CYLINDER TO BE PURCHASED WITH GAS

TECH DATA AVAILABILITY

NOTICE:

X

REFERENCE NUMBER: ZD072

REFERENCE NUMBER: A1036

REFERENCE NUMBER: A1202

APPROVED SOURCES OF SUPPLY:

LINDE LLC DBA 00741 P/N P-10 GAS MIXTURE

AIRGAS USA LLC DBA AIRGAS 56028 P/N METHANE/ARGON

LINE ITEM 00003 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = HM: CLNG/DRY = X: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = O:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

PACKAGE IAW DOT FOR DOMESTIC. PACKAGE IAW UN INTER

NATIONAL

FOR EXPORT. MARK/LABEL IAW MIL-STD 129.

NSN: 6830000609972

CHLORODIFLUOROMETHANE, R-22

NEW MANUFACTURE OR RECLAIMED

SHIPPING NAME--CHLORODIFLUOROMETHANE, R-22

HAZARD CLASS/DIVISION--2.2, I.D. NO. UN1018

LABEL REQUIRED--NONFLAMMABLE GAS

UNIT QTY EQUALS 128 LB (58 KG) PER CYLINDER

GFP--CYLINDER NSN 8120-01-338-6024

TECH DATA AVAILABILITY:

SAMPLING:

Origin inspection requirements:

For refillable Government cylinders of refrigerant filled from bulk containers the contractor shall provide and conform to the following:

-,,Traceability documentation (i.e. invoice, receiving report, customer number, order number, quantity, batch/analysis number, delivery number, etc.) establishing a chain of custody from the actual manufacturer to the contractor or from the manufacturer to the subcontractor which the prime contractor intends to use as their source of supply.

-,,A certificate of analysis (test report) of the bulk material from the manufacturer and the traceability documentation cited above shall be provided to DLA Aviation by the contractor after DCMA QAR authentication, for validation before next phase.

-,,Samples shall be pulled from the bulk tank iaw AHRI-700 section 5.2 of AHRI-700 to cover vapor and liquid phases and shall be tested iaw

AHRI-700.

o,,Pulling of the samples shall be witness by DCMA QAR.

o,,All tests shall be witness by DCMA QAR.

-,,The test report for the bulk sample shall be iaw AHRI-700 and include: the characteristics, reporting units, test method used, actual test value, a certification statement stating that the product meets AHRI-700, signature of the laboratory supervisor and the date of the test.

-,,A copy of the test report for the sample from the bulk shall be provided to DLA Aviation by the contractor after DCMA QAR authentication, for validation before next phase.

-,,The filling process will start after the test report of the bulk material is validated by DLA-Aviation.

-,,After the filling of the Government cylinders is completed the DCMA QAR shall select representative cylinders required for the lot/batch iaw the cylinder sample size.

o,,Cylinder sample size: For lot number equal or less than 16 filled cylinders, 2 samples are required. For lots/batches larger than 16 filled cylinders, 3 samples are required.

o,,The number of samples selected is an exception to the sampling plan called for in ANSI Z 1.4 and only applies to sampling for end item quality conformance testing of filled cylinders.

-,,The full representative cylinders shall be sampled iaw AHRI-700 section 5.2 of AHRI-700 to cover vapor and liquid phases.

o,,The samples from the full representative cylinders shall be tested iaw AHRI-700.

o,,All tests shall be witness by DCMA QAR.

o,,The test report shall be iaw AHRI-700 and include: the characteristics, reporting units, test method used, actual test value, a certification statement stating that the product meets AHRI-700, signature of the laboratory supervisor and the date of the test.

o,,Traceability; End-item quality conformance test certificates shall show the serial numbers of the end-item filled cylinders that they were sampled / taken from, the exact test results that were obtained per each cylinder sampled and shall state the batch or lot number assigned.

Strict traceability to the bulk certificate of conformance shall be maintained for every filled batch or lot of end-item filled cylinders. A reference note shall be added to the end-item quality conformance test certificates referencing the bulk batch number for traceability purposes.

o,,A copy of the test report for the samples from the representative cylinders shall be provided to DLA Aviation by the by the contractor after DCMA QAR authentication, for validation before deliver of material.

-,,All cylinder valves shall be shrink wrapped.

-,,All cylinders ready-for-shipment shall be visually inspected by the DCMA QAR for conformance to following: cylinder markings IAW item description, shrink-wrap on the valves and documentation/cylinder marking traceability from the bulk container to the filled cylinder by cylinder serial number, lot/batch numbers and cylinder filling records.

REFERENCE NUMBER: ZD072

REFERENCE NUMBER: A0646

REFERENCE NUMBER: A1036

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A1132

SPECS/STD/DRAWINGS:

I/A/W CID A-A-58060B NOT 1

BASIC DTD 06 OCT 03

AMEND NR B DTD 06 OCT 03

TYPE NUMBER: AA58060-R22-58

LINE ITEM 00004 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = HM: CLNG/DRY = X: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = ZZ: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

PACKAGING IAW D.O.T FOR DOMESTIC

SHIPMENTS. DOMESTIC SHIPMENTS SHALL BE

MARKED & LABELED IAW D.O.T & MIL-STD 129.

EXPORT SHIPMENTS SHALL BE IAW U.N. INTER-

NATIONAL REQUIREMENTS & MIL-STD 129.

NSN: 8120000790544

PRESSURE RELIEF DEVICE ASSEMBLY

WITH BURST DISK & SEALING WASHER RATED FOR

USE WITH 3500 PSIG WORKING PRESSURE.

ASSEMBLY MUST MEET ALL REQUIREMENTS OF TYPE

CG-1 PRESSURE RELIEF DEVICE AS OUTLINED IN

IN CGA PAMPHLET S-1.1 LATEST EDITION.

EXCEPTION TO DWG NO. 322AS169, DELETE MIL-V-2

AND INSERT COMMERCIAL ITEM DESCRIPTION A-A-59860

DATA PACKAGE AVAILABILITY

SAMPLING:

REFERENCE NUMBER: A0644

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: ADD01

REFERENCE NUMBER: ADL01

SPECS/STD/DRAWINGS:

I/A/W DRAWING NR 30003 322AS169

BASIC DTD 06 SEP 20

AMEND NR C DTD 80 JUN 17

TYPE NUMBER: 322AS169-1

LINE ITEM 00005 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = D3: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = Q: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

PACKAGE/MARK/LABEL IAW D.O.T REQUIREMENTS AND MIL-

STD 129.

NSN: 8120001032802

ADAPTER, COMPRESSED GAS CYLINDER

QUALITY SDDT:

TECH DATA PACKAGE AVAILABILITY:

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A0644

SPECS/STD/DRAWINGS:

I/A/W DRAWING NR 19207 11658921

BASIC DTD 06 SEP 18

AMEND NR DTD 69 FEB 12

TYPE NUMBER:

I/A/W DRAWING NR 19207 11658921

REFNO DTD 06 SEP 19

AMEND NR DTD 71 MAR 18

LINE ITEM 00006 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = D3: OPI = O:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = Q: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

NSN: 6830001061659

CHLORODIFLUOROMETHANE, FULL CYLINDER

VIRGIN OR RECLAIMED MATERIAL

SHIPPING NAME--CHLORODIFLUOROMETHANE, R-22

HAZARD CLASS OR DIVISION--2.2

IDENTIFICATION NUMBER UN1018

LABEL REQUIRED--NONFLAMMABLE GAS

UNIT QTY EQUALS 50 LB (22.7 KG) PER

NON-REFILLABLE CYLINDER

CYLINDER SHALL CONFORM TO DOT SPEC 39.

CYLINDER MODEL 12

DIMENSIONS 12.00" ID 17.56" HT

SERVICE PRESSURE 260PSI

CYLINDER TO BE PURCHASED WITH GAS

VALVE SHALL HAVE CGA OUTLET CONNECTION NO. 165

CYLINDER SHALL BE EQUIPPED WITH A DOT APPROVED

PRESSURE RELIEF DEVICE. VALVE SHALL BE EQUIPPED

WITH DISPOSABLE OUTLET CAP. STANDARD COMMERCIAL

CYLINDER COLOR CODE TO ARI GUIDELINE "N" IS

IS ACCEPTABLE.

EACH CYLINDER SHALL BE INDIVIDUALLY BOXED.

TECH DATA AVAILABILITY:

Additional requirements for final product origin inspection on refrigerants:

For non-refillable pre-packaged cylinders (disposable cylinder DOT 39 specification) of refrigerant the contractor shall provide and conform to the following:

-,,Traceability documentation (i.e. invoice, receiving report, customer number, order number, quantity, lot/batch number, delivery number, etc.)

establishing a chain of custody from the actual manufacturer to the contractor.

-,,A certificate of analysis (test report) of the bulk material from the manufacturer and the traceability documentation cited above shall be provided to DLA Aviation by the DCMA QAR.

-,,The certificate of analysis/test report shall be iaw AHRI-700 and include: the characteristics, reporting units, test method used, actual test value, a certification statement stating that the product meets AHRI-700, signature of the laboratory supervisor and the date of the test.

-,,All cylinder valves shall be shrink wrapped.

-,,All cylinders shall be visually inspected by the DCMA QAR for conformance to the following:

o,,Packaging, marking and labeling. With particular attention to sloppy logos, errors in cylinder weights, misspellings, offset valves, curved (instead of straight) handle bases and shrink wrapped valve.

o,,Traceability from the pre-packaged cylinders to the certificate of analysis from the material manufacturer by lot/batch.

-,,The DCMA QAR shall select two representative cylinders for any lot/batch size shall be taken from the group of cylinders offered to the Government.

o,,The two samples selected is an exception to the sampling plan called for in ANSI Z 1.4 and only applies to sampling for end item quality conformance testing of filled cylinders.

o,,Samples from the two representative cylinders shall be pull iaw section 5.2 of AHRI-700 to cover vapor and liquid phases.

o,,The samples from the full representative cylinders shall be tested iaw AHRI-700.

o,,All tests shall be witnessed the by DCMA QAR.

o,,The test report shall be iaw AHRI-700 and include: the characteristics, reporting units, test method used, actual test value, a certification statement stating that the product meets AHRI-700, signature of the laboratory supervisor and the date of the test.

o,,Traceability to the sample certificate of analysis shall be maintained for every batch or lot of cylinders. A reference note shall be added to the end-item quality conformance test certificates referencing the batch number for traceability purposes.

o,,A copy of the test report for the samples from the two representative cylinders shall be provided to DLA Aviation by the DCMA QAR.

REFERENCE NUMBER: ZD072

REFERENCE NUMBER: A0646

REFERENCE NUMBER: A1036

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A1132

SPECS/STD/DRAWINGS:

I/A/W CID A-A-58060B NOT 1

BASIC DTD 06 OCT 03

TYPE NUMBER: AA58060R22W22.7

LINE ITEM 00007 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = HM: CLNG/DRY = X: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = ZZ: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

PACKAGING IAW D.O.T FOR DOMESTIC

SHIPMENTS. DOMESTIC SHIPMENTS SHALL BE

MARKED & LABELED IAW D.O.T & MIL-STD 129.

EXPORT SHIPMENTS SHALL BE IAW U.N. INTER-

NSN: 8120001341456

CYLINDER, COMPRESSED GAS

SULPHUR HEXAFLUORIDE, DOT 3AA2015, WITH FLANGE

AND VALVE PROTECTION CAP, 140 CU IN NOMINAL

VOLUMETRIC CAPACITY, 4.143 NOM DIA BY 13.250

NOM HEIGHT, CYLINDER COLOR CODED PER MIL STD 101

WITH VALVE CONFORMING TO THE CURRENT ISSUE OF COMMERCIAL ITEM

DESCRIPTION A-A-59860, PIN AA59860-089/091

WITH RIGID SIPHON TUBE.

PALLETIZATION SHALL BE IAW LOAD TYPE IX OF

MIL STD 147

ADDIT'L PALLETIZATION & PACKING REQ'TS

TECH DATA AVAILABILITY:

EMPTY CYLINDER

SAMPLING:

REFERENCE NUMBER: A0274

REFERENCE NUMBER: A0646

REFERENCE NUMBER: Q0106

SPECS/STD/DRAWINGS:

I/A/W SPEC NR RR-C-901E

BASIC DTD 06 OCT 03

AMEND NR E DTD 10 JUL 01

TYPE NUMBER: II

LINE ITEM 00008 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

MARK AND LABEL IAW D.O.T REQUIREMENTS AND MIL-STD

129.

NSN: 6830001343709

NITROGEN, TECHNICAL, OIL FREE, FULL

SHIPPING NAME--NITROGEN, COMPRESSED

HAZARD CLASS/DIVISION--2.2, I.D. NO. UN1066

LABEL REQUIRED--NONFLAMMABLE GAS

UNIT QTY EQUALS 12 CU FT PER CYLINDER

GFM--CYLINDER NSN 8120-00-180-6392

TECH DATA AVAILABILITY:

MSDS

SAMPLING:

REFERENCE NUMBER: A0646

REFERENCE NUMBER: A1036

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: ZD072

SPECS/STD/DRAWINGS:

I/A/W CID A-A-59503C

BASIC DTD 06 OCT 03

AMEND NR C DTD 06 OCT 03

TYPE NUMBER: A-A-59303-1A1-12

LINE ITEM 00009 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = HM: CLNG/DRY = X: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = ZZ: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

PACKAGING IAW D.O.T FOR DOMESTIC

SHIPMENTS. DOMESTIC SHIPMENTS SHALL BE

MARKED & LABELED IAW D.O.T & MIL-STD 129.

EXPORT SHIPMENTS SHALL BE IAW U.N. INTER-

NSN: 8120001394441

CYLINDER, COMPRESSED GAS, EMPTY

SULFUR HEXAFLUORIDE

DOT 3AA2015,9 IN. DIA. X 51 IN. HGT.

130 LB MAX TARE WGT. 2640 CU IN NOM WATER CAP.

100 LB PRODUCT CAPACITY.

WITH FLANGE AND VALVE PROTECTION CAP

3/4-14NGT INLET THD, 3 1/8-11UNS-1 VALVE CAP THD

TREATMENT AND PAINTING OF CYLINDERS

COLOR CODE AND STENCIL PER MIL STD 101B

WITH VALVE CONFORMING TO THE CURRENT ISSUE OF COMMERCIAL ITEM

DESCRIPTION A-A-59860, PIN AA59860-091.

OUTLET CAP AND CHAIN ASSEMBLY NOT REQUIRED.

QUALITY SDDT:

TECH DATA AVAILABILITY:

REFERENCE NUMBER: A1091

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A0646

REFERENCE NUMBER: A0852

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W SPEC NR RR-C-901E

BASIC DTD 06 OCT 03

LINE ITEM 00010 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = O:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

MIL-STD 129 REQUIREMENTS ARE APPLICABLE.

SEE ITEM DESCRIPTION FOR ADDITIONAL

MARKING AND LABELING REQUIREMENTS.

NSN: 8120001429241

VALVE, COMPRESSED GAS CYLINDER

UNIT BOX CONTAINS 25 VALVES

LIQUEFIED PETROLEUM PRODUCTS

3/4-14NGT INLET, CGA 510 OUTLET

0.885-14NGO-LH-INT(BULLET NIPPLE)

OVERFILL PROTECTION TO INCLUDE DIP TUBE TO BE

TO 1/2 INCH FROM BOTTOM OF 28''HIGH CYLINDER.

OUTLET PLUG ASSY NOT REQUIRED

SUGGESTED VALVE PART NUMBER:

SHERWOOD PART NUMBER GV510 WITH OPD.

TECH DATA AVAILABILITY:

SAMPLING:

REFERENCE NUMBER: A0646

REFERENCE NUMBER: Q0106

SPECS/STD/DRAWINGS:

I/A/W CID A-A-59860

BASIC DTD 10 MAR 29

AMEND NR DTD 10 MAR 29

TYPE NUMBER: CID PIN AA59860-026 OR -

LINE ITEM 00011 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = Q: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

MARK AND LABEL IAW DOT REQUIREMENTS

AND MIL-STD 129.

NSN: 8120001429245

UNIT BOX CONTAINS 25 VALVES.

INERT, OIL FREE, 2015 PSI.

3/4-14NGT INLET, CGA 580 OUTLET

0.965-14NGO-RH-INT

OUTLET PLUG NOT REQUIRED

UNIT OF ISSUE BX EQUALS 25 VALVES.

SUGGESTED VALVE PART NUMBER: SHERWOOD PART NUMBER GV58061-32

REFERENCE NUMBER: ZD025

REFERENCE NUMBER: A0646

REFERENCE NUMBER: Q0106

SPECS/STD/DRAWINGS:

I/A/W CID A-A-59860

BASIC DTD 10 MAR 29

TYPE NUMBER: CID PIN AA59860-023

LINE ITEM 00012 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = ED: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = Q: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

NSN: 8120001429246

INERT, OIL TOLERANT

UNIT BOX OF 25 EACH

FOR 2015 PSI CYLINDER AND

3/4-14NGT INLET, CGA 590 OUTLET

0.965-14NGO-LH-INT

OUTLET PLUG ASSY NOT REQUIRED

SUGGESTED VALVE PART NUMBER:

SHERWOOD PART NUMBER GV59061-32

TECH DATA AVAILABILITY:

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A0646

REFERENCE NUMBER: A1202

SPECS/STD/DRAWINGS:

I/A/W CID A-A-59860

BASIC DTD 10 MAR 29

TYPE NUMBER: CID PIN AA59860-065 OR -

LINE ITEM 00013 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = Q: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

PACKAGE/MARK/LABEL IAW DOT REQUIREMENTS

AND MIL-STD 129.

NSN: 8120001519753

HELIUM, OIL TOLERANT, GRADE B

DOT 3AA2015, 9" OD BY 51"IN HEIGHT,

CAPACITY, 216 CU FT.

WITH FLANGE AND VALVE PROTECTION CAP.

3/4-14NGT INLET THD, 3 1/8-11UNS-1 VALVE CAP THD

WITH VALVE PER MIL SPEC MIL-DTL-2F,MIL-DTL-2/11D

TYPE V11-580-4.

WITH VALVE CONFORMING TO THE CURRENT ISSUE OF COMMERCIAL ITEM

DESCRIPTION A-A-59860, PIN AA59860-023

OUTLET PLUG AND CHAIN NOT REQUIRED.

VALVE NSN: 8120-00-142-9245

COLOR CODE PER MIL STD 101B.

QUALITY SDDT:

TECH DATA AVAILABILITY

EMPTY CYLINDER

REFERENCE NUMBER: A1091

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A0646

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W SPEC NR RR-C-901E

BASIC DTD 06 OCT 03

AMEND NR E DTD 06 OCT 03

TYPE NUMBER: RRC901-2B2AU049

LINE ITEM 00014 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

MIL-STD 129 REQUIREMENTS ARE APPLICABLE.

NSN: 8120001758568

CYLINDER, COMPRESSED GAS, EMPTY, PROPANE

LIQUEFIED PETROLEUM GAS, CAPACITY 40 LBS.

12.25 INCHES DIA AND 25.12 INCHES HIGH.

4BA, 4BW, AND 4E 240

WITH FLANGE AND VALVE PROTECTION CAP.

WITH VALVE CONFORMING TO THE CURRENT ISSUE OF COMMERCIAL ITEM

DESCRIPTION A-A-59860, PIN AA59860-026/028.

DIP TUBE NOT REQUIRED

WITH OVERFILLING PREVENTION DEVICE (OPD)

IAW NFPA 58, LIQUEFIED PETROLEUM GAS CODE.

TREATMENT AND PAINTING OF CYLINDERS:

COLOR CODE AND STENCIL PER MIL STD 101B

QUALITY SDDT:

TECH DATA AVAILABILITY:

MARKET ACCEPTABILITY

REFERENCE NUMBER: ZD025

REFERENCE NUMBER: A1091

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A0646

REFERENCE NUMBER: A1132

SPECS/STD/DRAWINGS:

I/A/W CID A-A-59666B

BASIC DTD 06 OCT 03

AMEND NR B DTD 10 JUN 07

TYPE NUMBER: I P1 I A 026 / 028

LINE ITEM 00015 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = O:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

MARK AND LABEL IAW D.O.T REQUIREMENTS AND MIL-STD

NSN: 8120001789814

CRITICAL APPLICATION ITEM

CAP, COMPRESSED GAS CYLINDER.

UNIT OF ISSUE IS EACH.

TECH DATA AVAILABILITY:

SAMPLING:

REFERENCE NUMBER: A0646

REFERENCE NUMBER: Q0106

SPECS/STD/DRAWINGS:

I/A/W SPEC NR MIL-DTL-17376/1A NOT 1

BASIC DTD 06 OCT 03

AMEND NR A DTD 06 OCT 03

TYPE NUMBER: M17376/1-2

LINE ITEM 00016 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = A1: OPI = O:

INTRMDTE CONT = D3: INTRMDTE CONT QTY = AAA:

PACK CODE = Q: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

NSN: 8120001790076

CAP, COMPRESSED GAS CYLINDER.

UNIT OF ISSUE IS EACH.

CLASSIFICATION NUMBER C17376/1-1.

TECH DATA AVAILABILITY:

SAMPLING:

REFERENCE NUMBER: A0646

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W SPEC NR MIL-DTL-17376F NOT 1

BASIC DTD 06 OCT 03

AMEND NR F DTD 06 OCT 03

TYPE NUMBER:

I/A/W SPEC NR MIL-DTL-17376/1A NOT 1

REFNO DTD 06 OCT 03

AMEND NR A DTD 06 OCT 03

TYPE NUMBER: M 17376/1-1

LINE ITEM 00017 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = Q: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

NSN: 8120001795653

CYLINDER, COMPRESSED GAS, NITROGEN RESERVOIR

DOT 3AA3000, BUMPED BACK BOTTOM STYLE,

SHATTERPROOF FEATURES INCLUDED

WITHOUT NECK FLANGE AND VALVE PROTECTION CAP.

WITHOUT VALVE BUT WITH METAL PLUG INSTALLED WITH

THREAD LUBRICANT.

CYLINDER SERVICE PRESSURE IS 3000 PSIG.

7 3/32 IN. O.D. BY 19 1/4 IN. H. PLUS OR MINUS

1/4 IN. O.D. AND 1 IN. H., 500 CU. IN. MINIMUM

AND 570 CU. IN. MAXIMUM VOLUMETRIC CAPACITY.

WITH 1 7/8 INCH OUTSIDE DIAMETER NECK.

WITH 1-11 1/2NGT INTERNAL NECK THREAD.

CYLINDER TO BE PAINTED IAW MIL-STD-101 FOR

"OIL-FREE NITROGEN".

TECH DATA PACKAGE AVAILABLE.

EMPTY CYLINDER

SAMPLING:

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A0003

REFERENCE NUMBER: A1091

SPECS/STD/DRAWINGS:

I/A/W DRAWING NR 30003 65A102C92

REFNO DTD 06 SEP 23

AMEND NR F DTD 97 AUG 18

TYPE NUMBER:

I/A/W DRAWING NR 30003 65A102-C92

BASIC DTD 06 SEP 24

AMEND NR F DTD 97 AUG 18

LINE ITEM 00018 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

MARK AND LABEL IAW D.O.T. REQUIREMENTS AND MIL-STD

-129.

NSN: 8120001806392

CYLINDER,COMPRESSED GAS, EMPTY

NITROGEN,OIL FREE,DOT3AA2015

EXCEPTION TO RR-C-901D, TABLE II, ALTHOUGH NOT

MEDICAL, CYLINDER SIZE CODE TO BE AL.

CYL. SIZE 4.250 + OR - 0.250 DIA. X 17.000

+ OR - 0.500 INS. H., 12 CU. FT. CAP.

1/2-14NGT INTERNAL NECK THREADS. WITH FLANGE AND

VALVE PROTECTION CAP. 3 1/8-11UNS-1 FLANGE TO

PROTECTION CAP THREADS.

WITH VALVE CONFORMING TO THE CURRENT ISSUE OF COMMERCIAL ITEM

DESCRIPTION A-A-59860, PIN AA59860-023

SUGGESTED VALVE PART NUMBER:

SHERWOOD (cage 70292) PART NUMBER P/N GV58041-32.

TREATMENT AND PAINTING OF CYLINDERS

COLOR CODE AND STENCIL PER MIL STD 101B

FULL NSN: 6830-00-134-3709.

QUALITY SDDT:

TECH DATA AVAILABILITY

REFERENCE NUMBER: ZD025

REFERENCE NUMBER: A1091

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A0646

SPECS/STD/DRAWINGS:

I/A/W SPEC NR RR-C-901E

BASIC DTD 06 OCT 03

LINE ITEM 00019 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

NSN: 8120001817181

SULFUR HEXAFLUORIDE

DOT 3AA1800, 6.719 TO 7.000 IN. O.D.

BY 22.5 TO 25.0 IN. H. TO BASE OF VALVE.

25 LB PRODUCT CAPACITY

WITH FLANGE AND VALVE PROTECTION CAP,

3/4-14NGT INLET THD, 3 1/8-11UNS-1 VALVE CAP THD

WITH VALVE CONFORMING TO THE CURRENT ISSUE OF COMMERCIAL ITEM

DESCRIPTION A-A-59860, PIN AA59860-090

W/O OUTLET CAP AND CHAIN ASSY.

VALVE NSN IS 8120-01-534-1813.

CYLINDER COLOR CODED PER MIL STD 101B.

QUALITY SDDT:

TECH DATA AVAILABILITY:

REFERENCE NUMBER: A1091

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A0646

SPECS/STD/DRAWINGS:

I/A/W SPEC NR RR-C-901E

BASIC DTD 06 OCT 03

LINE ITEM 00020 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = O:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

MARK AND LABEL IAW D.O.T. REQUIREMENTS AND MIL- ST

D 129.

NSN: 8120001818082

CARBON DIOXIDE, 50 LBS. CAP., EMPTY

9 IN. O.D. BY 51.0 IN. HGT, DOT 3AA2265

WITH FLANGE AND VALVE PROTECTION CAP

3/4-14NGT INLET THD, 3 1/8-11UNS-1 VALVE CAP THD

TREATMENT AND PAINTING OF CYLINDERS:

COLOR CODE AND STENCIL PER MIL STD 101B.

WITH VALVE CONFORMING TO THE CURRENT ISSUE OF COMMERCIAL ITEM

DESCRIPTION A-A-59860, PIN AA59860-031 WITH THE FOLLOWING EXCEPTION:THE

PRD IS FOR SERVICE PRESSURE CYLINDER 2265PSI.

SUGGESTED VALVE PART NUMBER:

SHERWOOD (cage 70292) PART NUMBER GV32061-35

OUTLET CAP & CHAIN NOT REQUIRED.

QUALITY SDDT:

TECH DATA AVAILABILITY:

REFERENCE NUMBER: A1091

REFERENCE NUMBER: ZD025

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A0646

SPECS/STD/DRAWINGS:

I/A/W SPEC NR RR-C-901E

BASIC DTD 06 OCT 03

TYPE NUMBER: RRC901-2N1AG

LINE ITEM 00021 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

MIL-STD 129 REQUIREMENTS ARE APPLICABLE.

NSN: 8120001818149

HEXAFLUOROETHANE, R116

BUMPED BACK BOTTOM STYLE WITH NECK RING AND CAP

DOT 3AA1800, 1800 PSIG MAX WP

6.719 MIN, 6.781 MAX IN. CROSS-SECTIONAL OD.

23.25 MIN, 23.75 MAX IN. O/A H.

24 LB NOMINAL WATER CAPACITY

3/4-14-NGT INTERNAL THD NECK

WITH FLANGE AND VALVE PROTECTION CAP

VALVE NSN 8120-00-530-9224.

COLOR MARKING A, B, C, AND BODY ORANGE PER

MIL-STD 101

TECH DATA AVAILABILITY:

SAMPLING:

REFERENCE NUMBER: A0646

REFERENCE NUMBER: Q0106

SPECS/STD/DRAWINGS:

I/A/W SPEC NR RR-C-901E

BASIC DTD 06 OCT 03

LINE ITEM 00022 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = O:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

NSN: 6830001866665

HEXAFLUOROETHANE, R-116

SHIPPING NAME---HEXAFLUOROETHANE, COMPRESSED

DOT CLASS/DIVISION---2.2, U.N. NO. UN2193

LABEL REQUIRED---NONFLAMMABLE GAS

UNIT QTY EQUALS 18 LBS (8.2 KG) PER CYLINDER.

THE FOLLOWING GOVT OWNED CYLINDER SHALL BE

FURNISHED FOR FILLING:

CYLINDER NSN 8120-00-181-8149

TREATMENT AND PAINTING:

COLOR CODE ORANGE AND STENCIL THE CYLINDERS PER

MIL STD 101B. CYLINDER SIZE IS CRITICAL AND

SHALL BE 6.719 MIN TO 6.781 MAX IN. O.D. AND

23.25 MIN TO 23.75 MAX IN. HGT. OVERSIZE

CYLINDERS SHALL NOT BE FILLED.

TECH DATA AVAILABILITY:

Origin inspection requirements:

For refillable Government cylinders of refrigerant filled from bulk containers the contractor shall provide and conform to the following:

-,,Traceability documentation (i.e. invoice, receiving report, customer number, order number, quantity, batch/analysis number, delivery number, etc.) establishing a chain of custody from the actual manufacturer to the contractor or from the manufacturer to the subcontractor which the prime contractor intends to use as their source of supply.

-,,A certificate of analysis (test report) of the bulk material from the manufacturer and the traceability documentation cited above shall be provided to DLA Aviation by the contractor after DCMA QAR authentication, for validation before next phase.

-,,Samples shall be pulled from the bulk tank iaw AHRI-700 section 5.2 of AHRI-700 to cover vapor and liquid phases and shall be tested iaw

AHRI-700.

o,,Pulling of the samples shall be witness by DCMA QAR.

o,,All tests shall be witness by DCMA QAR.

-,,The test report for the bulk sample shall be iaw AHRI-700 and include: the characteristics, reporting units, test method used, actual test value, a certification statement stating that the product meets AHRI-700, signature of the laboratory supervisor and the date of the test.

-,,A copy of the test report for the sample from the bulk shall be provided to DLA Aviation by the contractor after DCMA QAR authentication, for validation before next phase.

-,,The filling process will start after the test report of the bulk material is validated by DLA-Aviation.

-,,After the filling of the Government cylinders is completed the DCMA QAR shall select representative cylinders required for the lot/batch iaw the cylinder sample size.

o,,Cylinder sample size: For lot number equal or less than 16 filled cylinders, 2 samples are required. For lots/batches larger than 16 filled cylinders, 3 samples are required.

o,,The number of samples selected is an exception to the sampling plan called for in ANSI Z 1.4 and only applies to sampling for end item quality conformance testing of filled cylinders.

-,,The full representative cylinders shall be sampled iaw AHRI-700 section 5.2 of AHRI-700 to cover vapor and liquid phases.

o,,The samples from the full representative cylinders shall be tested iaw AHRI-700.

o,,All tests shall be witness by DCMA QAR.

o,,The test report shall be iaw AHRI-700 and include: the characteristics, reporting units, test method used, actual test value, a certification statement stating that the product meets AHRI-700, signature of the laboratory supervisor and the date of the test.

o,,Traceability; End-item quality conformance test certificates shall show the serial numbers of the end-item filled cylinders that they were sampled / taken from, the exact test results that were obtained per each cylinder sampled and shall state the batch or lot number assigned.

Strict traceability to the bulk certificate of conformance shall be maintained for every filled batch or lot of end-item filled cylinders. A reference note shall be added to the end-item quality conformance test certificates referencing the bulk batch number for traceability purposes.

o,,A copy of the test report for the samples from the representative cylinders shall be provided to DLA Aviation by the by the contractor after DCMA QAR authentication, for validation before deliver of material.

-,,All cylinder valves shall be shrink wrapped.

-,,All cylinders ready-for-shipment shall be visually inspected by the DCMA QAR for conformance to following: cylinder markings IAW item description, shrink-wrap on the valves and documentation/cylinder marking traceability from the bulk container to the filled cylinder by cylinder serial number, lot/batch numbers and cylinder filling records.

REFERENCE NUMBER: A1091

REFERENCE NUMBER: A0646

REFERENCE NUMBER: A1036

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: ZD072

REFERENCE NUMBER: A1132

SPECS/STD/DRAWINGS:

I/A/W CID A-A-58060B NOT 1

BASIC DTD 06 OCT 03

TYPE NUMBER: AA58060R116W8.2

LINE ITEM 00023 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = HM: CLNG/DRY = X: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = ZZ: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

PACKAGING IAW D.O.T FOR DOMESTIC

SHIPMENTS. DOMESTIC SHIPMENTS SHALL BE

MARKED & LABELED IAW D.O.T & MIL-STD 129.

EXPORT SHIPMENTS SHALL BE IAW U.N. INTER-

NSN: 6830001929067

NITROGEN, FULL CYLINDER

FIRE BOTTLE

OIL FREE. 99.5 MIN BY VOLUME NITROGEN

SHIPPING NAME--NITROGEN

HAZARD CLASS OR DIVISION--2.2, I.D. NO. UN1066

LABEL REQUIRED--NONFLAMMABLE GAS

UNIT QTY EQUALS 113 CU FT PER CYLINDER.

THE FOLLOWING GOVT OWNED CYLINDER SHALL

BE FURNISHED FOR FILLING:

CYLINDER NSN 8120-01-134-9896.

MSDS

SAMPLING:

REFERENCE NUMBER: ZD072

REFERENCE NUMBER: A1036

REFERENCE NUMBER: Q0106

SPECS/STD/DRAWINGS:

I/A/W CID A-A-59503C

BASIC DTD 06 OCT 03

AMEND NR C DTD 06 OCT 03

TYPE NUMBER: A-A-59503-1-B-1 113

LINE ITEM 00024 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = HM: CLNG/DRY = X: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = ZZ: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

PACKAGE IAW D.O.T FOR DOMESTIC SHIPMENTS.

EXPORT SHIPMENTS SHALL BE IAW U.N. INTERNATIONAL R

EQUIREMENTS.

SHIPMENTS SHALL BE MARKED IAW MIL-STD 129.

NSN: 8120001931697

CYLINDER, COMPRESED GAS

OIL TOLERANT AIR

DOT 3AA2265, 234 CU FT CAPACITY, 9 BY 51 IN. NOM

WITH FLANGE AND VALVE PROTECTION CAP

WITH VALVE CONFORMING TO THE CURRENT ISSUE OF COMMERCIAL ITEM

DESCRIPTION A-A-59860, PIN AA59860-015

WITHOUT OUTLET PLUG AND CHAIN ASSY.

COLOR CODE PER MIL STD 101B FOR AIR OIL-TOLERANT

QUALITY SDDT:

TECH DATA AVAILABILITY:

VALVE NSN: 8120-00-664-2908.

EMPTY CYLINDER

REFERENCE NUMBER: A1091

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A0646

SPECS/STD/DRAWINGS:

I/A/W SPEC NR RR-C-901E

BASIC DTD 06 OCT 03

TYPE NUMBER: TYPE II

LINE ITEM 00025 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = ZZ: OPI = M:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

COLOR CODE & STENCIL IAW MIL-STD 101.

BAR CODE & MARK IAW MIL-STD-129.

NSN: 8120001931698

CYLINDER, COMPRESSED GAS,

EMPTY CYLINDER.

NITROGEN, OIL TOLERANT

DOT 3AA 2015, 9" O D BY 51" HEIGHT

3/4-14NGT CYLINDER TO VALVE INLET THREAD

3 1/8-11NS-1B FLANGE TO VALVE CAP THREAD

WITH FLANGE AND VALVE PROTECTON CAP, WITH VALVE

WITH VALVE CONFORMING TO THE CURRENT ISSUE OF COMMERCIAL ITEM

DESCRIPTION A-A-59860<(>,,<)> PIN AA59860-065.

NSN 8120-00-142-9246.

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A1091

REFERENCE NUMBER: A0274

SPECS/STD/DRAWINGS:

I/A/W SPEC NR RR-C-901E

BASIC DTD 06 OCT 03

LINE ITEM 00026 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

MIL-STD 129 REQUIREMENTS ARE APPLICABLE. SEE ITEM

DESCRIPTION FOR

ADDITIONAL MARKING AND LABELING REQUIREMENTS.

NSN: 6830002031492

CALIBRATING GAS MIXTURE

HYDROGEN-2.5% +/- 0.1%, OXYGEN-20.5% +/-0.2%,

NITROGEN-76.05% +/- 0.2%, BALANCE-ARGON

DEW POINT---LESS THAN MINUS 80 DEG F.

OIL CONTENT--LESS THAN 2 MG PER CYLINDER

CERTIFIED ANALYSIS ON WEATHER PROOF TAG WIRED TO

VALVE. ACTUAL % HYDROGEN IN AIR TO THREE

SIGNIFICANT FIGURES STENCILLED ON CYLINDER.

SHIPPING NAME--COMPRESSED GAS N.O.S.

HAZARD CLASS/DIVISION--2.2, I.D.NO.--UN1956

LABEL REQUIRED--NONFLAMMABLE GAS

UNIT QTY EQUALS 6.0 CU FT PER CYLINDER.

CYLINDER IS

DOT 3AA2015, NONSHAT, W/O FLANGE AND CAP,

3.25 +/- O.125 IN. O.D. BY 13.25 +/- 0.25 IN. H,

WITH VALVE CONFORMING TO THE CURRENT ISSUE OF COMMERCIAL ITEM

DESCRIPTION A-A-59860, PIN AA59860-094

COLOR CODE AND STENCIL PER MIL-STD-101;

TOP-BLACK, TOP BAND-GREEN, BOTTOM BAND AND BODY-

ALUMINUM. ALUMINUM PAINT PER FED SPEC TT-P-38.

OR BY USING AN ALUMINUM PAINT SYSTEM THAT

COMPLIES WITH THE REQUIREMENTS OF COMPRESSED GAS ASSOCIATION STANDARD

CGA TB-17:2000; TESTS 1 THROUGH 5 OF THIS STANDARD SHALL APPLY FOR THE

QUALIFICATION OF THE PAINT SYSTEM THAT IS USED.

CYLINDERS SHALL BE STENCIL AS FOLLOWS:

"CALIBRATING GAS MIXTURE", "2.5% HYDROGEN- BALANCE AIR",

THE TITLES OF "CALIBRATING GAS

MIXTURE", "NSN 6830-00-203-1492 FULL"

AND THE PERCENT OF HYDROGEN IN AIR TO THREE

SIGNIFICANT PLACES STENCILLED IN MINIMUM 3/16 IN. BLACK CHARACTERS

SHALL BE STENCILLED OR APPLIED TO THE CYLINDER WALL WITH A PRESSURE

SENSITIVE OR CLEAR LAMINATE ADHESIVE LABEL.

CYLINDER TO BE PURCHASED WITH GAS

NOTICE:

INSPECTION AND TEST REQUIREMENTS:

a. GENERAL REQUIREMENTS: The contractor shall perform or have performed all inspections and tests necessary and as governed by drawings, specifications and standards and product technical requirements as cited elsewhere in this contract to assure total compliance to contract requirements. All records of inspections and tests shall be maintained by the contractor (and as applicable by any sub-contractors/vendors) and shall be made available to the Government for a minimum of four (4) years after the completion of the contract.

b. VISUAL/DIMENSIONAL INSPECTIONS: For all visual/dimensional inspections performed during receiving inspection, in-process inspection and end-item inspection, the inspection level shall be II. Any departure from a specified requirement shall be classified as a defect. Any defect shall be cause for rejection of the entire shipment quantity.

c. RECEIVING INSPECTION AND TESTS: Receiving inspection and testing shall be performed by the contractor and/or their sub-contractors/vendors to assure that all raw materials (e.g. pure gases - including major and trace components and balance gases) and components (e.g. cylinders, valves, etc.) used in the manufacture of product produced for this contract shall fully comply with the technical requirements as cited within the contract or its associated drawings, specifications and standards.

d. END ITEM INSPECTION AND TESTS: End item inspection and testing is mandatory for any product(s) produced for this contract. All major components (expressed in Percentage) and trace components (expressed in Parts Per Million - PPM) and trace contaminants (expressed in units of measurement as shown in the contract) shall be analyzed/tested during end item testing. Balance gases need not be analyzed for percentage of composition during end item testing and shall be reported as "balance".

The inspection level shall be II. The failure of any sample unit to pass any test shall be cause for rejection of the entire batch quantity that was tested/represented by that sample. End item test samples that are not completely used-up/emptied in testing and that satisfy all other contract requirements (with the allowable exception of fill/pressure) may be delivered as part of the total contract quantity.

e. IN-PROCESS: Where product exists in an "In-Process" stage, in-process testing and/or inspection shall be performed to assure that product "in-process" will not adversely effect the end item product being delivered to the Government. The contractor and/or their sub-contractor(s) will perform end item testing and inspection as required by this QAP and as stated within this contract. Unless otherwise specified, all in-process and end item testing shall have an analytical accuracy of plus or minus two (2) percent - relative to each component tested.

f. BATCH REQUIREMENTS: All products manufactured for this contract shall be manufactured by a batch process and the end item (s) shall be identified by unique batch numbers. A batch shall be defined as all product that was manufactured, blended and filled at the same time from a single homogeneous process using the same raw materials and manufacturing equipment or that was manufactured from a continuous-batching process utilizing a continuous individual product manufacture and fill operation that uses the same raw materials, manufacturing equipment and manufacturing procedures operated within a 24 hour time period.

g. ANALYTICAL TAG REQUIREMENTS: Each batch shall be analyzed and certified to the accuracy as cited within this QAP and/or as stated within the contract. The results shall be recorded on a weather proof tag which shall be attached to the valve. The tag shall include but not be limited to: contract number, batch number, and shall report the calibration gas mixture components by percentage, PPM or balance. Note -calibration gas mixture cylinders which are required by contract to have a certificate of analysis (certificate of traceability) attached/applied to the cylinder will not be required to have an additional analytical tag attached to them. The analytical values reported on the analytical tags or certificates of analysis (certificate of traceability) shall be the arithmetical average of the values obtained from the end item sample calibration gas mixture cylinders that were tested for each major and trace components and trace contaminant that was analyzed during end item testing.

h. RESPONSIBILITY FOR INSPECTION: Unless otherwise specified within the contract, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract, the contractor may use their own or other facilities found suitable for the performance of the inspection requirements as cited herein, unless disapproved for use by the Government. The Government reserves the right to perform any of the inspections set forth within the contract or its associated specifications where such inspections are deemed necessary to assure that supplies and services conform to prescribed requirements.

i. EXAMINATION OF PREPARATION FOR DELIVERY: The inspection level shall be S-2. An examination of preservation, packaging, packing and marking shall be performed to determine compliance with contract requirements. Any non-compliance with contractual requirements shall be cause for rejection of the entire shipment quantity.

j. DEFECTIVE ITEMS DISCOVERED AFTER SHIPMENT: Any defective item(s) discovered by the government after shipment may be cause for rejection of the entire contract quantity.

REFERENCE NUMBER: ZD072

REFERENCE NUMBER: ZD059

REFERENCE NUMBER: A1036

REFERENCE NUMBER: A0449

REFERENCE NUMBER: Q0106

APPROVED SOURCES OF SUPPLY:

AIR LIQUIDE AMERICA SPECIALTY 4YRR6 P/N 0101H401118ZCOC

LINE ITEM 00027 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = HM: CLNG/DRY = X: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = ZZ: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

PACKAGE IAW D.O.T FOR DOMESTIC

SHIPMENTS. DOMESTIC SHIPMENTS SHALL BE

MARKED & LABELED IAW D.O.T & MIL-STD 129.

EXPORT SHIPMENTS SHALL BE PKG IAW U.N.

INTERNATIONAL REQ. & MIL-STD 129.

NSN: 8120002166799

CAP ASSEMBLY, CYLINDER VALVE OUTLET

OXYGEN

TO BE FURNISHED AS AN ASSEMBLY CONSISTING OF THE

CAP, FIBER DISK, RETAINING RINGS AND CHAIN.

NO CONE INSERT WILL BE FURNISHED WITH CAP.

FOR USE ON AN OXYGEN VALVE WITH A CGA 540 OUTLET

CONNECTION.

TECH DATA AVAILABILITY:

SAMPLING:

REFERENCE NUMBER: A0646

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W CID A-A-59860

BASIC DTD 10 MAR 29

LINE ITEM 00028 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = A1: OPI = M:

INTRMDTE CONT = D3: INTRMDTE CONT QTY = AAA:

PACK CODE = Q: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

NSN: 6830002298946

PROPANE, FULL CYLINDER

SHIPPING NAME: PROPANE

HAZARD CLASS/DIVISION: 2.1, I.D. NO. UN1978

LABEL REQUIRED: FLAMMABLE GAS

UNIT CYLINDER CONTAINS 20 LBS.

THE FOLLOWING GOVT OWNED CYLINDER SHALL BE

FURNISHED FOR FILLING:

CYLINDER NSN 8120-00-530-5225.

TECH DATA AVAILABILITY:

SAMPLING:

REFERENCE NUMBER: A0646

REFERENCE NUMBER: A1036

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: ZD072

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD GPA STD 2140-97

BASIC DTD 06 OCT 07

AMEND NR DTD 06 OCT 07

TYPE NUMBER: PROPANE, GRADE HD-5

LINE ITEM 00029 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = HM: CLNG/DRY = X: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = ZZ: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = F: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

PACKAGING IAW D.O.T FOR DOMESTIC

SHIPMENTS. DOMESTIC SHIPMENTS SHALL BE

MARKED & LABELED IAW D.O.T & MIL-STD 129.

EXPORT SHIPMENTS SHALL BE IAW U.N. INTER-

NSN: 8120002446981

HELIUM, OIL FREE, 216 CU FT PER CYLINDER

9.0 IN. O.D. BY 51 IN. HGT, DOT 3AA2015

WITH FLANGE AND VALVE PROTECTION CAP.

3/4-14NGT INLET THD, 3 1/8-11UNS-1 VALVE CAP THD

TREATMENT AND PAINTING OF CYLINDERS:

COLOR CODE AND STENCIL PER MIL STD 101B.

WITH VALVE CONFORMING TO THE CURRENT ISSUE OF COMMERCIAL ITEM

DESCRIPTION A-A-59860, PIN AA59860-023

OUTLET PLUG & CHAIN NOT REQUIRED

QUALITY SDDT:

TECH DATA AVAILABILITY:

REFERENCE NUMBER: A1091

REFERENCE NUMBER: ZD025

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: A0646

SPECS/STD/DR…