SP7000-26-Q-1023 - Combined Synipsis-Solicitation.docx

Solicitation Number: SP7000-26-Q-1023

This is a combined synopsis/solicitation for commercial items prepared in accordance with the Revolutionary FAR Overhaul (RFO) Issued May 2, 2025 (Updated March 16, 2026). This announcement constitutes the only solicitation; quotations are being requested, and a written solicitation will not be issued.

This solicitation is issued as a Request for Quotation (RFQ) number SP7000-26-Q-1023.

This notice incorporates clauses and provisions in effect through Federal Acquisition Circular (FAC) 2026-01 effective 13 March 2026, Defense Federal Acquisition Regulation Supplement (DFARS) Change effective date 10 November 2025, and Defense Logistics Acquisition Directive (DLAD) Revision 5 effective 12 January 2026 through PROCLTR 2026-03. Defense Priorities and Allocations Systems (DPAS) are not applicable to this solicitation.

This acquisition is unrestricted. The associated North American Industrial Classification System (NAICS) code is 811210.

The Defense Logistics Agency (DLA) seeks to enter into a single award, firm fixed price, stand-alone contract for Maintenance and Repair of Black and White (B&W) Equipment.

Any award resulting from this solicitation will be issued on Standard Form (SF) 1449.

All invoicing under this contract will be accomplished via Wide Area Workflow (WAWF). FAR 52.212-1 OFFER SUBMISSION INSTRUCTIONS – Quotations must include the following items.

Submission of a quotation that does not contain all items requested below may result in elimination from consideration for award.

1. Quotations may be submitted in contractor format and shall include:

(1) Company name, address, telephone number, e-mail address, and FAX number

(2) Solicitation number

(3) Contractor DUNS Number and Commercial and Government Entity (CAGE) Code

(4) Unit Price and extended price for CLIN

(5) Technical information (as stated below under FAR 15.308)

(6) Signed acknowledgements of amendments (applicable only if any amendments are issued against this solicitation)

2. FAR 52.212-2 Evaluations-Commercial Items (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Price, Technical, and Past Performance as stated within Evaluation Factors For Award.

Technical and past performance, when combined, will not be weighted. The Lowest Price Technically Acceptable (LPTA) source selection process will be utilized.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

3. FAR 13.106-2 Evaluation of Quotations or Offers – The Government intends to evaluate quotes in response to this quotation and will award one firm-fixed priced contract to the lowest price, technically acceptable contractor whose quote represents the lowest price. Therefore, to be considered for award, contractors are required to submit descriptive product literature/technical information which clearly indicates the product offered meets the Government minimum requirements. This information will be used to determine technical acceptability. Technical information will be evaluated for acceptability (only) on a pass/fail basis and will not be rated. Any contractor who has submitted technically acceptable product information will then have its quote evaluated for price.

All questions and inquiries should be addressed via email to Ernest.Gardner@dla.mil – Request for Quotation Number SP7000-26-Q-1023.

Offerors responding to this announcement shall submit their proposal via email to Ernest Gardner at Ernest.Gardner@dla.mil.

All quotes must be received by 31 July 2026 at 03:00 PM Eastern to be considered for award.

Per unit CLIN pricing shall be inclusive of ALL costs, including, but not limited to: printer cost, Smartcard Readers, packaging, shipping, 1-year warranty, etc. Additional priced lines will not be accepted.

Attachments:

Attachment 1 – Performance Work Statement Attachment 2 – CLIN Structure Attachment 3 – Performance Work Statement Compliance Form Attachment 4 – Full Text Provisions

FAR 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

FAR- https://www.acquisition.gov/far-overhaul DFARS - DPC | Defense Acquisition Regulations System | DFARS/PGI (osd.mil) DLAD - Policy and Directives (dla.mil)

(End of Clause)

CLAUSES INCORPORATED BY REFERENCE

CERTIFICATIONS (DEC 2014)

TANTALUM, AND TUNGSTEN (MAY 2024)

OPERATIONS (MAY 2013)

DFARS 252.237-7010 PROHIBITION ON INTERROGATION OF DETAINEES BY CONTRACTOR

PERSONNEL (JAN 2023)

FULL TEXT CLAUSES

FAR 52.212-4 Terms and Conditions—Commercial Products and Commercial Services.

As prescribed in 12.205(b)(3), insert the following clause:

Terms and Conditions—Commercial Products and Commercial Services (Deviation Date)

(a) Definitions. The clause at Federal Acquisition Regulation (FAR) 52.202-1, Definitions, is incorporated by reference.

(b) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post acceptance rights—

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(c) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(d) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(e) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal, or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause FAR 52.233-1, Disputes, which is incorporated in this contract by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence. Examples of occurrences include acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. When an excusable delay occurs, the Contractor shall—

(1) Notify the Contracting Officer in writing as soon as possible;

(2) Remedy the delay as quickly as possible; and

(3) Notify the Contracting Officer when the occurrence is over.

(g) Invoice. The Government will handle invoices according to the Prompt Payment Act (31 U.S.C. 3903) and 5 CFR part 1315. The Contractor shall submit invoices to the address designated in the contract to receive invoices. An invoice must include the information required by 5 CFR part 1315.9(b).

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees, and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark, or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment—

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and prompt payment regulations at 5 CFR part 1315.

(3) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date that appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(4) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall—

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the—

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected line item or subline item, if applicable;

(D) Contractor point of contact; and

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(5) Interest.

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by FAR part 33 if–

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see FAR part 32).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a termination for cause.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on-

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures for interest credits prescribed in FAR part 32 in effect on the date of this contract.

(j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon—

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination.

(k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l) Termination for the Government’s convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor’s records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. The Government will send a cure notice to the Contractor, unless the reason for the termination is late delivery. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) Warranty. The Contractor warrants and implies that the items delivered under this contract are merchantable and fit for use for the particular purpose described in this contract.

(p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 49 U.S.C. 40118, Government-financed air transportation; and 41 U.S.C. chapter 21 relating to procurement integrity.

(r) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:

(1) The schedule of supplies/services;

(2) The Disputes, Payments, Invoice, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause;

(3) Other contract clauses incorporated in the solicitation or contract;

(4) Addenda to this solicitation or contract;

(5) Solicitation provisions incorporated in the solicitation;

(6) Other paragraphs of this clause;

(7) Other documents, exhibits, and attachments; and

(8) The specification.

(s) Unauthorized obligations.

(1) Except as stated in paragraph (s)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern:

(i) Any such clause is unenforceable against the Government.

(ii) Neither the Government nor any Government-authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an “I agree” click box or other comparable mechanism (e.g., “click-wrap” or “browse-wrap” agreements), execution does not bind the Government or any Government authorized end user to such clause.

(iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement.

(2) Paragraph (s)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(t) Comptroller General examination of record. This paragraph applies if this contract was awarded using other than sealed bid procedures and is in excess of the simplified acquisition threshold on the date of award of this contract.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices, at all reasonable times, the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR part 4, longer period required by statute, or periods specified in other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This clause does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(u) Incorporation by reference. The Contractor’s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(End of clause)

FAR 52.204-7 ALT 1 (FEB 2026)

As prescribed in 4.208(b)(1), replace the first sentence of the introductory paragraph of the basic provision with the following sentences:

The Offeror shall have an active Federal Government contracts registration in the System for Award Management (SAM) as soon as possible. If registration is not possible when submitting an offer or quotation, the awardee shall be registered in SAM according to the requirements of the Alternate I of clause at FAR 52.204-13, System for Award Management-Maintenance.

DFARS 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018)

(a) Definitions. As used in this clause— “Contract financing payment” means an authorized Government disbursement of monies to a contractor prior to acceptance of supplies or services by the Government.

(1) Contract financing payments include—

(i) Advance payments;

(ii) Performance-based payments;

(iii) Commercial advance and interim payments;

(iv) Progress payments based on cost under the clause at Federal Acquisition Regulation (FAR) 52.232-16, Progress Payments;

(v) Progress payments based on a percentage or stage of completion (see FAR 32.102(e)), except those made under the clause at FAR 52.232-5, Payments Under Fixed-Price Construction Contracts, or the clause at FAR 52.232-10, Payments Under Fixed-Price Architect-Engineer Contracts; and

(vi) Interim payments under a cost reimbursement contract, except for a cost reimbursement con5tract for services when Alternate I of the clause at FAR 52.232-25, Prompt Payment, is used.

(2) Contract financing payments do not include—

(i) Invoice payments;

(ii) Payments for partial deliveries; or

(iii) Lease and rental payments.

“Electronic form” means any automated system that transmits information electronically from the initiating system to affected systems.

“Invoice payment” means a Government disbursement of monies to a contractor under a contract or other authorization for supplies or services accepted by the Government.

(1) Invoice payments include—

(i) Payments for partial deliveries that have been accepted by the Government;

(ii) Final cost or fee payments where amounts owed have been settled between the Government and the contractor;

(iii) For purposes of subpart 32.9 only, all payments made under the clause at 52.232-5, Payments Under Fixed-Price Construction Contracts, and the clause at 52.232-10, Payments Under Fixed-Price Architect-Engineer Contracts; and

(iv) Interim payments under a cost-reimbursement contract for services when Alternate I of the clause at 52.232-25, Prompt Payment, is used.

(2) Invoice payments do not include contract financing payments.

“Payment request” means any request for contract financing payment or invoice payment submitted by the Contractor under this contract or task or delivery order.

“Receiving report” means the data prepared in the manner and to the extent required by Appendix F, Material Inspection and Receiving Report, of the Defense Federal Acquisition Regulation Supplement.

(b) Except as provided in paragraph (d) of this clause, the Contractor shall submit payment requests and receiving reports in electronic form using Wide Area WorkFlow (WAWF). The Contractor shall prepare and furnish to the Government a receiving report at the time of each delivery of supplies or services under this contract or task or delivery order.

(c) Submit payment requests and receiving reports to WAWF in one of the following electronic formats:

(1) Electronic Data Interchange.

(2) Secure File Transfer Protocol.

(3) Direct input through the WAWF website.

(d) The Contractor may submit a payment request and receiving report using methods other than WAWF only when—

(1) The Contractor has requested permission in writing to do so, and the Contracting Officer has provided instructions for a temporary alternative method of submission of payment requests and receiving reports in the contract administration data section of this contract or task or delivery order;

(2) DoD makes payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD-approved electronic third-party payment system or other exempted vendor payment/invoicing system (e.g., PowerTrack, Transportation Financial Management System, and Cargo and Billing System);

(3) DoD makes payment on a contract or task or delivery order for rendered health care services using the TRICARE Encounter Data System; or

(4) The Governmentwide commercial purchase card is used as the method of payment, in which case submission of only the receiving report in WAWF is required.

(e) Information regarding WAWF is available at https://wawf.eb.mil/.

(f) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests.

DFARS 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

___COMBO

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

_______COMBO____________________________________________________

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

____ disa.ogden.esd.mbx.cscassig@mail.mil_________ (Contracting Officer: Insert applicable information or “Not applicable.”)

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

252.246-7008 SOURCES OF ELECTRONIC PARTS (JAN 2023)

(a) Definitions. As used in this clause— “Authorized aftermarket manufacturer” means an organization that fabricates a part under a contract with, or with the express written authority of, the original component manufacturer based on the original component manufacturer’s designs, formulas, and/or specifications.

“Authorized supplier” means a supplier, distributor, or an aftermarket manufacturer with a contractual arrangement with, or the express written authority of, the original manufacturer or current design activity to buy, stock, repackage, sell, or distribute the part.

“Contract manufacturer” means a company that produces goods under contract for another company under the label or brand name of that company.

“Contractor-approved supplier” means a supplier that does not have a contractual agreement with the original component manufacturer for a transaction but has been identified as trustworthy by a contractor or subcontractor.

“Electronic part” means an integrated circuit, a discrete electronic component (including, but not limited to, a transistor, capacitor, resistor, or diode), or a circuit assembly (section 818(f)(2) of Pub. L. 112-81).

"Original component manufacturer" means an organization that designs and/or engineers a part and is entitled to any intellectual property rights to that part.

“Original equipment manufacturer” means a company that manufactures products that it has designed from purchased components and sells those products under the company's brand name.

“Original manufacturer” means the original component manufacturer, the original equipment manufacturer, or the contract manufacturer.

(b) Selecting suppliers. In accordance with section 818(c)(3) of the National Defense Authorization Act for Fiscal Year 2012 (Pub. L. 112-81), as amended by section 817 of the National Defense Authorization Act for Fiscal Year 2015 (Pub. L. 113-291) and section 885 of the National Defense Authorization Act for Fiscal Year 2016 (Pub. L. 114-92), the Contractor shall—

(1) First obtain electronic parts that are in production by the original manufacturer or an authorized aftermarket manufacturer or currently available in stock from—

(i) The original manufacturers of the parts;

(ii) Their authorized suppliers; or

(iii) Suppliers that obtain such parts exclusively from the original manufacturers of the parts or their authorized suppliers;

(2) If electronic parts are not available as provided in paragraph (b)(1) of this clause, obtain electronic parts that are not in production by the original manufacturer or an authorized aftermarket manufacturer, and that are not currently available in stock from a source listed in paragraph (b)(1) of this clause, from suppliers identified by the Contractor as contractor-approved suppliers, provided that—

(i) For identifying and approving such contractor-approved suppliers, the Contractor uses established counterfeit prevention industry standards and processes (including inspection, testing, and authentication), such as the DoD-adopted standards at https://assist.dla.mil;

(ii) The Contractor assumes responsibility for the authenticity of parts provided by such contractor-approved suppliers; and

(iii) The Contractor’s selection of such contractor-approved suppliers is subject to review, audit, and approval by the Government, generally in conjunction with a contractor purchasing system review or other surveillance of purchasing practices by the contract administration office, or if the Government obtains credible evidence that a contractor–approved supplier has provided counterfeit parts. The Contractor may proceed with the acquisition of electronic parts from a contractor-approved supplier unless otherwise notified by DoD; or (3)(i) Take the actions in paragraph (b)(3)(ii) of this clause if the Contractor—

(A) Obtains an electronic part from—

(1) A source other than any of the sources identified in paragraph (b)(1) or (b)(2) of this clause, due to nonavailability from such sources; or

(2) A subcontractor (other than the original manufacturer) that refuses to accept flowdown of this clause; or

(B) Cannot confirm that an electronic part is new or previously unused and that it has not been comingled in supplier new production or stock with used, refurbished, reclaimed, or returned parts.

(ii) If the contractor obtains an electronic part or cannot confirm an electronic part pursuant to paragraph (b)(3)(i) of this clause—

(A) Promptly notify the Contracting Officer in writing. If such notification is required for an electronic part to be used in a designated lot of assemblies to be acquired under a single contract, the Contractor may submit one notification for the lot, providing identification of the assemblies containing the parts (e.g., serial numbers);

(B) Be responsible for inspection, testing, and authentication, in accordance with existing applicable industry standards; and

(C) Make documentation of inspection, testing, and authentication of such electronic parts available to the Government upon request.

(c) Traceability. If the Contractor is not the original manufacturer of, or authorized supplier for, an electronic part, the Contractor shall—

(1) Have risk-based processes (taking into consideration the consequences of failure of an electronic part) that enable tracking of electronic parts from the original manufacturer to product acceptance by the Government, whether the electronic part is supplied as a discrete electronic part or is contained in an assembly;

(2) If the Contractor cannot establish this traceability from the original manufacturer for a specific electronic part, be responsible for inspection, testing, and authentication, in accordance with existing applicable industry standards; and (3)(i) Maintain documentation of traceability (paragraph (c)(1) of this clause) or the inspection, testing, and authentication required when traceability cannot be established (paragraph (c)(2) of this clause) in accordance with FAR subpart 4.7; and

(ii) Make such documentation available to the Government upon request.

(d) Government sources. Contractors and subcontractors are still required to comply with the requirements of paragraphs (b) and (c) of this clause, as applicable, if—

(1) Authorized to purchase electronic parts from the Federal Supply Schedule;

(2) Purchasing electronic parts from suppliers accredited by the Defense Microelectronics Activity; or

(3) Requisitioning electronic parts from Government inventory/stock under the authority of 252.251-7000 , Ordering from Government Supply Sources.

(i) The cost of any required inspection, testing, and authentication of such parts may be charged as a direct cost.

(ii) The Government is responsible for the authenticity of the requisitioned parts. If any such part is subsequently found to be counterfeit or suspect counterfeit, the Government will—

(A) Promptly replace such part at no charge; and

(B) Consider an adjustment in the contract schedule to the extent that replacement of the counterfeit or suspect counterfeit electronic parts caused a delay in performance.

(e) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (e), in subcontracts, including subcontracts for commercial items, that are for electronic parts or assemblies containing electronic parts, unless the subcontractor is the original manufacturer.

(End of clause)

DLAD Procurement Notes:

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2023)

(1) By submitting a quotation or offer, the contractor is confirming it currently has, or will obtain before delivery, and shall retain supply chain traceability documentation, as described in paragraph (2) of this procurement note, demonstrating the item conforms to the technical requirements, and, for part numbered items, is from an approved manufacturer.

(2) Supply Chain Traceability Documentation

(i) Supply chain traceability documentation shall include basic item description; part number; drawing or specification; national stock number; manufacturing source; manufacturing source’s Commercial and Government Entity (CAGE) code; and clear identification of the name and location of all supply chain intermediaries between the manufacturer to the contractor to Government acceptance.

(ii) Supply chain traceability documentation shall also include, when available, the manufacturer's batch identification for the item(s), such as date codes, lot codes, or serial numbers.

For part numbered items, contractors can find examples of acceptable supply chain traceability documentation at the Counterfeit Detection and Avoidance Program (CDAP) website (http://www.dla.mil/LandandMaritime/Business/Selling/Counterfeit-Detection- AvoidanceProgram/ ).

(iii) In addition, the contractor will obtain, retain, and provide to the contracting officer written documentation of all inspections and tests necessary to substantiate that the supplies furnished under this contract conform to contract requirements, including any applicable technical requirements for specified manufacturers’ parts. Such records shall include, without limitation, test reports, test data, material certification, and manufacturing process sheets, in addition to any other information identified in the technical specifications applicable to the item.

(3) The contractor shall make supply chain traceability documentation available to the contracting officer within three business days upon the contracting officer’s request. The contracting officer determines the acceptability and sufficiency of documentation. The contractor shall retain supply chain traceability documentation for ten years after final payment under this contract for audit and other valid government purposes. If the contractor fails to retain or provide the documentation, or the contracting officer finds the documentation to be unacceptable, the contracting officer may take corrective action, including, but not limited to, cancellation of undelivered orders or rejection of delivered supplies.

H11 SECTION 508 REQUIREMENTS (OCT 2020)

Contractors shall comply with the Section 508 Accessibility requirements in this contract and the current revision of the Voluntary Product Accessible Template (VPAT) Rev 508 at https://www.itic.org/policy/accessibility/vpat (copy website address into browser) as stated in their proposal, for the duration of contract performance.

PROVISIONS

FAR 52.252-1 SOLICITATIONS PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporated one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The full text of a clause may be accessed electronically at this/these address(es): Regulations URLs: (Click on the appropriate regulation.)

https://www.acquisition.gov/browsefar https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx

NOTE: After selecting the appropriate regulation above, at the "Table of Contents" page conduct a search for the desired regulation reference, using your browser's FIND function. When located, click on the regulation reference (hyperlink).

(End of provision)

PROVISIONS INCORPORATED BY REFERENCE

FULL TEXT PROVISIONS

252.204-7024 - NOTICE ON THE USE OF THE SUPPLIER PERFORMANCE RISK SYSTEM (MAR 2023)

(a) Definitions. As used in this provision— “Item risk” means the probability that a product, based on intended use, will introduce performance risk resulting in safety issues, mission degradation, or monetary loss.

“Price risk” means a measure of whether a proposed price for a product or service is consistent with historical prices paid for that item or service.

“Supplier risk” means the probability that an award may subject the procurement to the risk of unsuccessful performance or to supply chain risk (see Defense Federal Acquisition Regulation Supplement 239.7301).

(b) The Supplier Performance Risk System (SPRS), available at https://piee.eb.mil/, will be used in the evaluation of the Quoter or Offeror’s performance. SPRS retrieves item, price, quality, delivery, and contractor information on contracts from Government reporting systems in order to develop risk assessments.

(c) The Contracting Officer will consider SPRS risk assessments during the evaluation of quotations or offers received in response to this solicitation as follows:

(1) Item risk will be considered to determine whether the procurement represents a high-performance risk to the Government.

(2) Price risk will be considered in determining if a proposed price is consistent with historical prices paid for a product or a service or otherwise creates a risk to the Government.

(3) Supplier risk, including but not limited to quality and delivery, will be considered to assess the risk of unsuccessful performance and supply chain risk.

(d) SPRS risk assessments are generated daily. Quoters or Offerors are able to access their risk assessments by following the access instructions in the SPRS user's guide available at https://www.sprs.csd.disa.mil/reference.htm. Quoters and Offerors are granted access to SPRS for their own risk assessment classifications only. SPRS reporting procedures and risk assessment methodology are detailed in the SPRS user's guide. The method to challenge a rating generated by SPRS is also provided in the user's guide. SPRS evaluation criteria are available at https://www.sprs.csd.disa.mil/pdf/SPRS_DataEvaluationCriteria.pdf.

(e) The Contracting Officer may consider any other available and relevant information when evaluating a quotation or an offer.

(End of provision)

DLAD Procurement Notes:

L06 AGENCY PROTESTS (DEC 2016)

Interested parties may file an agency level protest with the contracting officer or may request an independent review by the chief of the contracting office (CCO). Independent review by the CCO is an alternative to consideration by the contracting officer and is not available as an appellate review of a contracting officer decision on a protest previously filed with the contracting officer. Absent a clear indication of the intent to file an agency level protest with the CCO for independent review, protests will be presumed to be protests to the contracting officer.

L29 SECTION 508 REQUIREMENTS (OCT 2021)

Offerors shall comply with the Section 508 accessibility requirements. By submission of its offer, the offeror affirms that its Information and Communication Technology (ICT) supplies and services are accessible as outlined in the law, the standard, and FAR Subpart 39.2. Offerors shall complete the current revision of the Voluntary Product Accessible Template (VPAT) Rev 508 at https://www.itic.org/policy/accessibility/vpat (copy website address into browser).