Amendment 0009 SP330011B5003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICAITON NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicble)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICIATION NO.

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 11)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a)By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPIRATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous edition unusable

SP3300-11-B-5003

Amendment 0009

Amendment 0009 is hereby incorporated into solicitation SP3300-11-B-5003 and shall become part of any resulting contract.

Amendment 0009 is being issued to provide an answer to a vendor question and revise drawings M-111, M-112, M-113 & M-114.

Question 1: The controls for the unit heaters call for occupancy sensors, yet none are shown of either the M or E drawings.

Who is to provide them, and how many are needed?

Answer 1: Electric or hot water unit heaters located in sprinkler rooms, electrical rooms, mechanical rooms and utility rooms will be controlled by integrated or locally mounted thermostats and be mounted no higher than 9Ft above the finished floor.

For hot water unit heaters in the bays and corridor of bldg 87 follow the revised specification below and attached drawings.

Revise Specification section 15951 paragraph 3.4.4.2 Unit Heater and Cabinet Unit Heater to:

Contractor shall install DDC to perform this Sequence of Operation and to provide inputs, outputs and alarms as specified.

a. Off-Auto Switch

(1) OFF: With the thermostat/sensor OFF-AUTO switch in the OFF position, the unit heater fans associated with the thermostat will be off.

(2) AUTO: With the thermostat/sensor OFF-AUTO switch in the AUTO position, the space sensor shall control the units in accordance with its Occupancy Mode.

b. Occupancy Modes

(1) Occupied: The unit heater shall be indexed to the occupied mode when the input from the System Scheduler is occupied, local override shall be provided for up 4 hours (adjustable).

(2) Unoccupied: The unit heater shall be in the Unoccupied Mode when the input from the System Scheduler is unoccupied.

c. Safeties: The unit shall run subject to the unit manufacturer's safeties.

d. Space Temperature Control

(1) In the Occupied Mode the fan will energize to maintain space occupied temperature at the configured set point 65F (adjustable).

(2) In the Unoccupied Mode the fan will energize to maintain space unoccupied temperature at the configured set point 55F (adjustable).

All other terms and conditions remain unchanged.

END OF AMENDMENT 0009

2.2 FIRE DOORS

1.4.7 Welding

ACQUISITION OPERATION J7-AB

J AVENUE BUILDING 404

NEW CUMBERLAND PA 17070-5001

717-770-6563 FX 717-770-7591

donna.kautz@dla.mil