Solicitation W912PF26QA001.pdf

Solicitation/Contract Form Continuation

Grounds Maintenance Services at USAG-I Vicenza, Italy

Continuation of Supplies or Services and Prices/Costs

Additional Information/Notes

SOLICITATION AND CONTRACT INFORMATION:

This solicitation is anticipated to result in a single-source Firm-Fixed-Price (FFP) Indefinite Delivery/Indefinite-Quantity (ID/IQ) type contract with an ordering period of five years from 16 December 2025 to 15 December 2030. The Government intends to award one Task Order concurrently with the basic contract that is in strict adherence to the established terms of the resultant basic ID/IQ contract. The ID/IQ contract minimum is

Euro 5,000 and not-to exceed ceiling amount is Euro 5,500,000. The cumulative total of all Task Orders awarded as a result of solicitation W912PF-

25-Q-A050 will not exceed Euro 5,500.000 over the life of the ID/IQ contract.

THE PRICING SUBMITTED BY QUOTERS WITHIN THE SOLICITATION'S "GROUND MAINTENANCE PRICE BOOK", ATTACHMENT 2 IS BINDING FOR THE LIFE OF THE CONTRACT AND WILL BE USED TO ESTABLISH CLINS PRICING FOR

SUBSEQUENT TASK ORDERS.

Item

Supplies/Service Estimated

Quantity

Unit

Unit Price

Amount

Caserma Ederle -Lawns Mowing - Maintenance cuts / Successivi tagli dei manti erbosi

Product Service Code: S208 Pricing Arrangement: Firm Fixed Price

30,000

Square Meter

Caserma Ederle -Mechanical weeding operations / Operazioni di diserbo meccanico

10,000

LERINO WAREHOUSE ( Annex #6)- Lawn Cut and Police - 1st cut / Tosatura, Pulizia Prati-primo taglio

3,900

LERINO WAREHOUSE ( Annex #6)- Lawn Cut and Police-Maint. cut / Tosatura, Pulizia Prati/taglio mantenimento

3,900

LONGARE (Annex #2)- Cleaning/Mowing of perimeter fence

14,500

LONGARE (Annex #2) - Lawn Cut and Police - 1st cut / Tosatura, Pulizia Prati - primo taglio

25,500

LONGARE (Annex #2) -Maint. cut / Tosatura, Pulizia Prati - taglio mantenimento

25,500

LONGARE (Annex #2) - Deforestation of shrubs and all uncontrolled vegetation along perimeter fence/ Pulizia cespugli e vegetazione incontrollata lungo recinzione perimetrale

14,500

LONGARE (Annex #2) - Cut grass on the slope / Taglio erba in pendenza

27,000

ASP # 7 - TORMENO (Annex #3) - Cleaning/Mowing of perimeter fence

ASP # 7 - TORMENO (Annex #3) - Lawn cut and Police / Tosatura, Pulizia Prati

45,000

ASP # 7 - TORMENO (Annex #3) -

Deforestation of shrubs and all uncontrolled vegetation along perimeter fence/ Pulizia cespuglie vegetazione incontrollata lungo recinzione perimetrale

TORRI AREA - (Annex 7) - Lawns Mowing - First cut / Primo taglio dell'erba

4,500

TORRI AREA - (Annex 7) - Lawns Mowing - Maintenance cuts / Successivi tagli dei manti erbosi

4,500

TORRI AREA - (Annex 7) - Hedge Trimming / Potatura Siepe (perimetro medio fino a 8.0mt)

Linear Meter

TORRI AREA - (Annex 7) - Charges & transfer to landfill / Oneri e trasporto a discarica

Metric Ton

DEL DIN SITE (Annexes #4) - Lawns Mowing - First cut / Primo taglio dell'erba (Detention Pond included)

160,000

DEL DIN SITE (Annexes #4) - Lawns Mowing - Maintenance cuts/ Successivi tagli dei manti erbosi (Detention Pond included)

160,000

DEL DIN SITE (Annexes #4) - Trimming and Pruning of Shrubs / Potatura Cespugli

DEL DIN SITE (Annexes #4) -

Mechanical weeding operations / Rimozione meccanica infestanti

45,000

DEL DIN SITE (Annexes #4) - Hedge Trimming / Potatura Siepe (perimetro medio fino 4.5mt)

DEL DIN SITE (Annexes #4) -

Vegetation Clean Up on "Wet Areas" / Pulizia Bacini

32,000

DEL DIN SITE (Annexes #4) - Cleaning of Perimeter Fence Area / Pulizia dell'area adiacente alla recinzione

26,500

VILLAGGIO - SCHOOL AREA (Annex #11)

- Lawns Mowing - First cut / Primo taglio dell'erba

VILLAGGIO - SCHOOL AREA (Annex #11)

- Lawns Mowing - Maintenance cuts/ Successivi tagli dei manti erbosi

VILLAGGIO - DPW AREA (Annex #12) - Lawns Mowing - First cut / Primo taglio dell'erba

4,000

VILLAGGIO - DPW AREA (Annex #12) -

Lawns Mowing - Maintenance cuts/ Successivi tagli dei manti erbosi

4,000

DEL DIN SITE - LEGACY AREA / USARAF

(Annex #5) - Lawns Mowing - First cut / Primo taglio dell'erba

12,000

DEL DIN SITE - LEGACY AREA / USARAF

(Annex #5) - Lawns Mowing - Maintenance cuts/ Successivi tagli dei manti erbosi

12,000

Supplemental USAG-Italy VMC Grounds Maintenance Services

Job

Ground Maintenance General Scope.

The contractor shall provide Ground Maintenance Services in accordance with the Performance Work Statement (PWS). All Delivery Task Orders will be Firm Fixed Price and issued within the five-year ordering period. This CLIN annotate the maximum ceiling amount of Euro 5,500,000.00 for ground maintenance services.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are not applicable for this line item.

Job

Continuation of Description

Requirements

Grounds Maintenance Services at USAG-I Vicenza, Italy

Continuation of Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

UNITED STATES

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Both

Destination Instructions: Inspection will be conducted on site.

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Continuation of Deliveries or Performance

From 16 Dec 2025 to 15 Dec 2030

Party to Pay Transportation Cost: Contractor

Point Type: Destination

Line Item

Delivery Schedule Estimated

Quantity

Address and POC

Delivery Period 30,000 Square Meter Place of Performance

From 16 Dec 2025 to 15 Dec 2030 DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Period of Performance

From

16 Dec 2025

To

15 Dec 2030

Delivery Period 10,000 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 3,900 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period

3,900 Square Meter Place of Performance

16 Dec 2025 To 15 Dec 2030

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Delivery Period 14,500 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 25,500 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 25,500 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

14,500 Square Meter Place of Performance

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

16 Dec 2025

Delivery Period 27,000 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 45,000 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 4,500 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 4,500 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 200 Linear Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 1 Metric Ton Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 160,000 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 160,000 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 500 Linear Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 45,000 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

200 Linear Meter Place of Performance

16 Dec 2025 To 15 Dec 2030

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

Delivery Period 32,000 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 26,500 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

10,000 Square Meter Place of Performance

DoDAAC: W582RR CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

16 Dec 2025

Delivery Period 4,000 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 4,000 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 12,000 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 12,000 Square Meter Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 1 Job Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Delivery Period 1 Job Place of Performance

CountryCode: USA

W6E7 USAG ITALY

UNIT 31401, APO AE 09630

APO, AE 09630

Contract Clauses

FAR Clauses Incorporated by Reference

Variation

Effective

Date

52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities.

Dec 2023

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. Nov 2021

52.204-27 Prohibition on a ByteDance Covered Application. Jun 2023 52.225-13 Restrictions on Certain Foreign Purchases. Feb 2021 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.233-3 Protest after Award. Aug 1996 52.233-4 Applicable Law for Breach of Contract Claim. Oct 2004

DFARS Clauses Incorporated by Reference

Number Title

Date

Alternate/

Deviation

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or

Jan 2023 Services.

252.204-7020 NIST SP 800-171 DoD Assessment Requirements. Nov 2023 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018 252.232-7010 Levies on Contract Payments. Dec 2006 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.204-7004 Antiterrorism Awareness Training for Contractors. Jan 2023

FAR Clauses Incorporated by Full Text

52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services. (Nov 2023)

Contract Terms and Conditions-Commercial Products and Commercial Services (Nov 2023)

Date

(a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights-

(1) Within a reasonable time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act (31 U.S.C. 3727).

However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract.

(c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties.

(d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at Federal Acquisition Regulation (FAR) 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract.

(e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference.

Number Title Effective

Date

Alternate/

Deviation

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017

52.204-13 System for Award Management Maintenance. Oct 2018

52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020

(f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(g) Invoice.

(1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include-

(i) Name and address of the Contractor;

(ii) Invoice date and number;

(iii) Contract number, line item number and, if applicable, the order number;

(iv) Description, quantity, unit of measure, unit price and extended price of the items delivered;

(v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading;

(vi) Terms of any discount for prompt payment offered;

(vii) Name and address of official to whom payment is to be sent;

(viii) Name, title, and phone number of person to notify in event of defective invoice; and

(ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

(x) Electronic funds transfer (EFT) banking information.

(A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

(B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer-System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer-Other Than System for Award Management), or applicable agency procedures.

(C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

(2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C.3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR Part 1315.

(h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings.

(i) Payment.-

(1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract.

(2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C.3903) and prompt payment regulations at 5 CFR Part 1315.

(3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause.

(4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made.

(5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall-

(i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the-

(A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment);

(B) Affected contract number and delivery order number, if applicable;

(C) Affected line item or subline item, if applicable; and

(D) Contractor point of contact.

(ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer.

(6) Interest.

(i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid.

(ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract.

(iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if-

(A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days;

(B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or

(C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2).

(iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment.

(v) Amounts shall be due at the earliest of the following dates:

(A) The date fixed under this contract.

(B) The date of the first written demand for payment, including any demand for payment resulting from a default termination.

(vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on-

(A) The date on which the designated office receives payment from the Contractor;

(B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or

(C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor.

(vii) The interest charge made under this clause may be reduced under the procedures prescribed in FAR 32.608-2 in effect on the date of this contract.

(j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon:

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination.

(k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties.

(l) Termination for the Government's convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor's records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided.

(m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession.

(o) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.

(p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.

(q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract.

(r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity.

(s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order:

(1) The schedule of supplies/services.

(2) The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause;

(3) The clause at 52.212-5.

(4) Addenda to this solicitation or contract, including any license agreements for computer software.

(5) Solicitation provisions if this is a solicitation.

(6) Other paragraphs of this clause.

(7) The Standard Form 1449.

(8) Other documents, exhibits, and attachments.

(9) The specification.

(t) [Reserved]

(u) Unauthorized Obligations.

(1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern:

(i) Any such clause is unenforceable against the Government.

(ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an "I agree" click box or other comparable mechanism (e.g., "click-wrap" or "browse-wrap" agreements), execution does not bind the Government or any Government authorized end user to such clause.

(iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement.

(2) Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.

(v) Incorporation by reference. The Contractor's representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(End of clause)

DFARS Clauses Incorporated by Full Text

252.225-7043 Antiterrorism/Force Protection for Defense Contractors Outside the United States. (Jun 2015)

ANTITERRORISM/FORCE PROTECTION POLICY FOR DEFENSE CONTRACTORS OUTSIDE THE UNITED STATES (JUN 2015)

(a) Definition. " United States ," as used in this clause, means, the 50 States, the District of Columbia , and outlying areas.

(b) Except as provided in paragraph (c) of this clause, the Contractor and its subcontractors, if performing or traveling outside the United States under this contract, shall-

(1) Affiliate with the Overseas Security Advisory Council, if the Contractor or subcontractor is a U.S. entity;

(2) Ensure that Contractor and subcontractor personnel who are U.S. nationals and are in-country on a non-transitory basis, register with the U.S. Embassy, and that Contractor and subcontractor personnel who are third country nationals comply with any security related requirements of the Embassy of their nationality;

(3) Provide, to Contractor and subcontractor personnel, antiterrorism/force protection awareness information commensurate with that which the Department of Defense (DoD) provides to its military and civilian personnel and their families, to the extent such information can be made available prior to travel outside the United States; and

(4) Obtain and comply with the most current antiterrorism/force protection guidance for Contractor and subcontractor personnel.

(c) The requirements of this clause do not apply to any subcontractor that is-

(1) A foreign government;

(2) A representative of a foreign government; or

(3) A foreign corporation wholly owned by a foreign government.

(d) Information and guidance pertaining to DoD antiterrorism/force protection can be obtained from HQDA-AT; telephone , DSN 222-9832 or commercial (703) 692-9832 " Note: American Contractor personnel must register with the U.S. Embassy.

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause-

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

http://www.sam.gov/

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

2 IN 1 COMBINATION: INVOICE/RECEIVING REPORT

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF

Data to be entered in WAWF

Pay Official DoDAAC

W56FJW

Issue By DoDAAC

W582RR

Admin DoDAAC

Inspect By DoDAAC

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) davide.dona.ln@army.mil

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

roberta.duso2.ln@army.mil and anna.calori.ln@army.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause) mailto:davide.dona.ln@army.mil mailto:roberta.duso2.ln@army.mil mailto:anna.calori.ln@army.mil

Addendum to 52.212-4, Contract Terms and Conditions - Commercial Products and

Commercial Services

Contract Terms and Conditions--Commercial Items

ADDENDUM TO 52.212-4

In accordance with FAR 12.302, Tailoring of Provisions and Clauses for Acquisition of Commercial Items, FAR 52.212-4 is tailored, as shown below, to reflect the special terms and conditions unique for this contract. The following shall apply to this contract in addition to those terms and conditions in FAR 52.212-4. The specific paragraph of FAR 52.212-4 is tailored as shown below:

(a) Inspection and Acceptance. Inspection and acceptance of services under this contract shall be performed by the COR (Contracting Officer's Representative). Place of inspection and point of acceptance of the services to be provided under this contract shall be at a destination specified in accordance with the delivery information specified above.

(b) Invoice: The contractor shall comply with WAWF DFARS Clause 252.232-7006 for submission of invoices. No paper invoices shall be submitted to the Contracting Office for approval. Invoices shall only be submitted through the WAWF electronic system.

The contractor shall:

1) Upload the paper version of the invoice in WAWF

2) Upload a valid DURC certificate in WAWF

3) Upload the following statement signed in WAWF:

"The amounts requested are only for performance in accordance with the terms and conditions of the contract. All payment due to employees, subcontractors, and suppliers from previous payments received under the contract have been made, and timely payments will be made from the proceeds of the payment covered by this certification, in accordance with terms and conditions of the contract, local labor laws and agreements, subcontract agreements, and the requirements of chapter 39 of Title 31, United States Code. "The contractor shall provide itemized invoices detailing materials, parts, labor rate, and labor hours and all other relevant pricing in formation in order to fully define the level of effort provided. The price for materials shall not exceed the Contractor's established catalog or market price.

(c) PARTIAL PAYMENTS ARE AUTHORIZED. Only the actual services rendered in accordance with the Performance work Statement (PWS) will be paid.

Contract Terms and Conditions Required To Implement Statutes or Executive Orders —

Commercial Products and Commercial Services

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders-

Commercial Products and Commercial Services.

(Jan 2025)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (Jan

2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889 (a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

(2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

(3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5).

(Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

(4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

X (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

(6) [Reserved].

(7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

(8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

(9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

(10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi- Agency Contracts. (Dec 2023) (Pub. L. 115-390, title II).

(11)

(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Dec 2023) (Pub. L. 115-390, title II).

(ii) Alternate I (Dec 2023) of 52.204-30.

X (12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Jan 2025) (31 U.S.C. 6101 note).

X (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

(14) [Reserved].

(15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) (15 U.S.C. 657a).

(16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

(17) [Reserved]

(18)

(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

(ii) Alternate I (Mar 2020) of 52.219-6.

(19)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

(ii) Alternate I (Mar 2020) of 52.219-7.

(20) 52.219-8, Utilization of Small Business Concerns (Jan 2025)(15 U.S.C. 637(d)(2) and (3)).

(21)

(i) 52.219-9, Small Business Subcontracting Plan (Jan 2025) (15 U.S.C. 637(d)(4)).

(ii) Alternate I (Nov 2016) of 52.219-9.

(iii) Alternate II (Nov 2016) of 52.219-9.

(iv) Alternate III (Jun 2020) of 52.219-9.

(v) Alternate IV (Jan 2025) of 52.219-9.

(22)

(i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

(ii) Alternate I (Mar 2020) of 52.219-13.

(23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 657s).

(24) 52.219-16, Liquidated Damages-Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)).

(25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024) (15 U.S.C. 657f).

(26)

(i) 52.219-28, Postaward Small Business Program Rerepresentation (Jan 2025) (15 U.S.C. 632(a)(2)).

(ii) Alternate I (Mar 2020) of 52.219-28.

(27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

(28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

(29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)).

(30) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15 U.S.C. 637(a)(17)).

(31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

X (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2025)(E.O. 13126).

(33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(34)

(i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

(ii) Alternate I (Feb 1999) of 52.222-26.

(35)

(i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

(ii) Alternate I (Jul 2014) of 52.222-35.

(36)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

(ii) Alternate I (Jul 2014) of 52.222-36.

(37) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

(38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

(39)

|X|(i) 52.222-50, combatting Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O 13496)

|X| (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(40) 52.222-54, Employment Eligibility Verification (Jan 2025) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

(41)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

(ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

(42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (May 2024) (42 U.S.C. 7671, et seq.).

(43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (May 2024) (42 U.S.C. 7671, et seq.).

(44) 52.223-20, Aerosols (May 2024) (42 U.S.C. 7671, et seq.).

(45) 52.223-21, Foams (May 2024) (42 U.S.C. 7671, et seq.).

(46) 52.223-23, Sustainable Products and Services (May 2024) (E.O. 14057, 7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

(47)

(i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

(ii) Alternate I (Jan 2017) of 52.224-3.

(48)

(i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

(ii) Alternate I (Oct 2022) of 52.225-1.

(49)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

(ii) Alternate I [Reserved].

(iii) Alternate II (Jan 2025) of 52.225-3.

(iv) Alternate III (Feb 2024) of 52.225-3.

(v) Alternate IV (Oct 2022) of 52.225-3.

X (50) 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

(52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

(54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

(55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) (E.O. 13513).

(56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

(57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

(58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

(59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) (31 U.S.C. 3332).

X (60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

(61) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

(62) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

(63) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Nov 2024) (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).

(64) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

(65)

(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631).

(ii) Alternate I (Apr 2003) of 52.247-64.

(iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with…