Solicitation Amendment - FA301626Q02760001.pdf

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30. 1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NUMBER 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER 5. SOLICITATION NUMBER

FA301626Q02760001

6. SOLICITATION ISSUE DATE

04 Sep 2026

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME Dionne Harris

b. TELEPHONE NUMBER (no collect calls) 210-652-8419

8. OFFER DUE DATE/

LOCAL TIME

14 Sep 2026

10:00 AM

9. ISSUED BY CODE: FA3016

FA3016 502 CONS CL

1655 SELFRIDGE AVE BLDG 5450, CP 210-671-3617

JBSA LACKLAND, TX 78236-5286

UNITED STATES

Dionne Harris, Email: dionne.harris@us.af.mil Telephone: 210-652-8419 Umar Thomas, Email: umar.thomas.1@us.af.mil Telephone: 210-652-8960

10. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR: 100

SMALL BUSINESS WOMEN-OWNED SMALL

BUSINESS (WOSB)

NORTH AMERICAN

INDUSTRY

CLASSIFICATION

STANDARD (NAICS):

337127

HUBZONE SMALL

BUSINESS

ECONOMICALLY

DISADVANTAGED WOMEN-

OWNED SMALL BUSINESS

(EDWOSB)

SIZE STANDARD:

SERVICE-DISABLED

VETERAN-OWNED SMALL

BUSINESS (SDVOSB)

8(A)

11. DELIVERY FOR FREE ON

BOARD (FOB) DESTINATION

UNLESS BLOCK IS MARKED

SEE SCHEDULE

12. DISCOUNT TERMS 13a.THIS CONTRACT IS A

RATED ORDER UNDER

THE DEFENSE PRIORITIES

AND ALLOCATIONS

SYSTEM-DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

REQUEST FOR

QUOTE (RFQ)

INVITATION

FOR BID (IFB)

REQUEST FOR

PROPOSAL (RFP)

15. DELIVER TO CODE:

See Schedule

16. ADMINISTERED BY CODE:

17a. CONTRACTOR/

OFFERER

CODE FACILITY

CODE:

TELEPHONE NUMBER

18a. PAYMENT WILL BE MADE BY CODE:

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED SEE ADDENDUM

19.

ITEM NUMBER

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT

PRICE

24.

AMOUNT

See Schedule (Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA

See Section G - Contract Administration Data

26. TOTAL AWARD AMOUNT (For Government Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR

52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

ARE ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN COPIES TO

ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET FORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT TO THE

TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REFERENCE OFFER DATED . YOUR

OFFER ON SOLICITATION (BLOCK 5), INCLUDING ANY ADDITIONS OR

CHANGES WHICH ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

31c. DATE SIGNED

COMPUTER GENERATED STANDARD FORM 1449 (REV. 11/2021)

PREVIOUS EDITION IS NOT USABLE Prescribed by GSA - FAR (48 CFR) 53.212

Created On:

04 Sep 2026, 09:22 AM Central Daylight Time

Solicitation/Contract Form BMET Work Center Furniture Package-Workbenches and Installation

Biomedical Equipment Technician (BMET) Work Center Furniture Package-Deliver, assemble, and install the specified workbenches, storage cabinets, and seating at the Port San Antonio CSDC.

Product Service Code: 7110

FA301626Q02760001

Supplies or Services & Prices or Costs Additional Information/Notes

Item Supplies / Services Quantity Unit Unit Price Amount

L-Shaped Technician Workbenches Brand Name or Equal: Lista Configuration: L-Shaped workstation with a three-piece, continuous worksurface composed of two rectangular sections joined by a diagonal corner piece.

Dimensions: Overall footprint of approximately 72" x 78".

Worksurface depth must be approximately 30" on all sections.

Height: Capable of being set to a fixed standing height of approximately 38 inches from floor to worksurface. Legs must feature a 6" height extension system adjustable in 2" increments.

Worksurface: ESD-Safe (Electrostatic Discharge) Plastic Laminate top, minimum 1.25" thick, with a surface resistivity between 10 and 10 ohms. Must include standard grounding hardware and a 10ft grounding cord.

Construction & Load Capacity: Frame must be constructed of minimum 16-gauge steel and must support a minimum of 1,000 lbs evenly distributed.

Storage: Must include a steel, under-worksurface mounted hanging cabinet (approximately 16-17" wide) containing one box drawer and one file drawer on full-extension ball-bearing glides, with a central locking mechanism.

Electrical: Must include an integrated multi-outlet power strip with a minimum of eight (8) forward-facing 120V receptacles.

Accessories: Must include one (1) straight overhead riser shelf system (approx. 36"W x 14"D x 19"H) mounted on the 42-inch return side, leaving the diagonal corner unobstructed. Riser shelf must be

ESD-

safe and feature integrated under-shelf LED task lighting.

Product Service Code: 7110 Pricing Arrangement: Firm Fixed Price

20 Each

L-Shaped Admin Workbenches Brand Name or Equal: Lista Configuration: L-Shaped workstation with a three-piece, continuous worksurface composed of two rectangular sections joined by a diagonal corner piece.

Dimensions: Overall footprint of approximately 60" x 66".

Worksurface depth must be approximately 30" on all sections.

Height: Capable of being set to a fixed sitting height of approximately 29-30 inches from floor to worksurface. Legs must feature a 6" height extension system adjustable in 2" increments.

Worksurface: ESD-Safe

(Electrostatic Discharge) Plastic Laminate top, minimum 1.25" thick, with a surface resistivity between 10 and 10 ohms. Must include standard grounding hardware and a 10ft grounding cord.

Construction & Load Capacity: Frame must be constructed of minimum 16-gauge steel and must support a minimum of 1,000 lbs evenly distributed.

Storage: Must include a steel, under-worksurface mounted hanging cabinet (approximately 16-17" wide) containing one box drawer and one file drawer on full-extension ball-bearing glides, with a central locking mechanism.

Electrical: Must include an integrated multi-outlet power strip with a minimum of eight (8) forward-facing 120V receptacles.

Accessories: None.

Product Service Code: 7110 Pricing Arrangement: Firm Fixed Price

6 Each

Straight ESD Workbenches Brand Name or Equal: Lista Configuration: Straight, heavy-duty 4-leg workbench.

Dimensions: Approximately 60" wide x 30" deep.

Height: Capable of being set to a fixed sitting height of approximately 29-30 inches from floor to worksurface. Legs must feature a 6" height extension system adjustable in 2" increments.

Worksurface: ESD-Safe (Electrostatic Discharge) Plastic Laminate top, minimum 1.25" thick, with a surface resistivity between 10 and 10 ohms. Must include standard grounding hardware and a 10ft grounding cord.

Construction & Load Capacity: Frame must be constructed of minimum 16-gauge steel and must support a minimum of 800 lbs evenly distributed.

Storage: Must include a steel, under-worksurface mounted hanging cabinet (approximately 16-17" wide) containing one box drawer and one file drawer on full-extension ball-bearing glides, with a central locking mechanism.

Electrical: Must include an integrated multi-outlet power strip with a minimum of eight (8) forward-facing 120V receptacles.

Accessories: None.

Product Service Code: 7110 Pricing Arrangement: Firm Fixed Price

2 Each

Medium Drawer Cabinets Brand Name or Equal: Lista Dimensions: Approx. 47"W x 28.5"D x 39"H.

Construction: Fully-welded, min.

18-gauge steel housing.

Configuration: High-density storage cabinet with five (5) drawers of varying heights (e.g., two 5" and three 7" usable heights). Drawers must be full-extension on heavy-duty ball-bearing glides, each supporting a minimum of 400 lbs.

Security: Central locking mechanism.

3 Each

Product Service Code: 7110 Pricing Arrangement: Firm Fixed Price

Tall Hybrid Storage Cabinet Brand Name or Equal: Lista Configuration: A stacked, two-part modular hybrid storage cabinet with an overall height of approx. 66" to 72".

Bottom Section: 39"H base unit with five (5) full-extension drawers (400 lbs capacity each) and central cylinder lock.

Top Section: Stack-mounted cabinet with lockable double-hinged doors and at least one (1) adjustable, full-width internal shelf. Shelf must support a min. of 200 lbs.

Product Service Code: 7110 Pricing Arrangement: Firm Fixed Price

1 Each

Tall Shelf Storage Cabinets (Qty:

4) Brand Name or Equal: Lista Dimensions: Approx. 47"W x 29.5"D x 57"H.

Construction: Fully-welded, min.

18-gauge steel housing.

Configuration: Double hinged, lockable doors. Interior must contain a minimum of three (3) adjustable, full-width shelves and one (1) fixed bottom shelf. Each shelf must support 440 lbs evenly distributed.

Security: Central locking mechanism.

Product Service Code: 7110 Pricing Arrangement: Firm Fixed Price

4 Each

Tall Technician Chairs Brand Name or Equal: No Brand Name Type: Industrial-grade, ESD-safe ergonomic drafting chair/stool.

Height: Adjustable pneumatic cylinder specifically tailored for 38-inch standing-height workbenches.

Material: Seat and backrest must be constructed of electrostatic dissipative (ESD) polyurethane or heavy-duty ESD vinyl. Material must be puncture-resistant, easy to sanitize, and resistant to common industrial chemicals.

Features: Must include a heavy-duty adjustable foot ring. Base must be a 5-star configuration equipped with conductive casters (for hard floors) and a metallic grounding drag chain to ensure continuous ESD dissipation. Must include ergonomic back tilt and lumbar support.

Product Service Code: 7110 Pricing Arrangement: Firm Fixed Price

20 Each

Admin Chairs Brand Name or Equal: No Brand Name Type: Industrial-grade, ESD-safe ergonomic task chair.

Height: Adjustable pneumatic cylinder tailored for standard 29-30 inch sitting-height desks.

Material: Seat and backrest must be constructed of electrostatic dissipative (ESD) polyurethane or heavy-duty ESD vinyl (matching the Technician chairs for aesthetic and functional standardization). 8 Each

Features: Base must be a 5-star configuration equipped with conductive casters (for hard floors) and a metallic grounding drag chain. Must include ergonomic adjustments including seat height, back tilt, and lumbar support.

Product Service Code: 7110 Pricing Arrangement: Firm Fixed Price

Turn-Key Assembly & Installation (Qty: 1) Brand Name or Equal: N/A (Service) Features: Includes all logistics, freight, indoor delivery, uncrating, mechanical assembly of all structural furniture components, leveling, verification of ESD grounding connections, and total off-site disposal of waste.

Product Service Code: 7110 Pricing Arrangement: Firm Fixed Price

1 Each

Description/Specifications/Statement of Work

Requirements Biomedical Equipment Technician (BMET) Work Center Furniture Package-Deliver, assemble, and install the specified workbenches, storage cabinets, and seating at the Port San Antonio CSDC.

Packaging and Marking

Inspection and Acceptance Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: Deliver to:

Biomedical Technician Workspace/1st Floor Air Force Medical Command (AFMEDCOM/A4/10W) Logistics and Installation Support Directorate 601 Davy Crockett Rd Bldg. 1534 J BSA Lackland-Kelly, TX 78226 POC: SHANNON N. OUIMET-AMARO, MSgt, USAF COMM

(210) 338-3388 Cell: 704-999-5167 shannon.n.ouimet-amaro.mil@health.mil

DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil Telephone: 2103383391

Destination Instructions: Delivery to:

Biomedical Technician Workspace/1st Floor Air Force Medical Command (AFMEDCOM/A4/10W) Logistics and Installation Support Directorate 601 Davy Crockett Rd Bldg. 1534 J BSA Lackland-Kelly, TX 78226 POC: SHANNON N. OUIMET-AMARO, MSgt, USAF COMM

(210) 338-3388 Cell: 704-999-5167 shannon.n.ouimet-amaro.mil@health.mil

DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil

Destination Instructions: Delivery to:

Biomedical Technician Workspace/1st Floor Air Force Medical Command (AFMEDCOM/A4/10W) Logistics and Installation Support Directorate 601 Davy Crockett Rd Bldg. 1534 J BSA Lackland-Kelly, TX 78226 POC: SHANNON N. OUIMET-AMARO, MSgt, USAF COMM

(210) 338-3388 Cell: 704-999-5167 shannon.n.ouimet-amaro.mil@health.mil

DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil

Destination Instructions: Delivery to:

Biomedical Technician Workspace/1st Floor Air Force Medical Command (AFMEDCOM/A4/10W) Logistics and Installation Support Directorate 601 Davy Crockett Rd Bldg. 1534 J BSA Lackland-Kelly, TX 78226 POC: SHANNON N. OUIMET-AMARO, MSgt, USAF COMM

(210) 338-3388 Cell: 704-999-5167 shannon.n.ouimet-amaro.mil@health.mil

DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil

Destination Instructions: Delivery to:

Biomedical Technician Workspace/1st Floor Air Force Medical Command (AFMEDCOM/A4/10W) Logistics and Installation Support Directorate 601 Davy Crockett Rd Bldg. 1534 J BSA Lackland-Kelly, TX 78226 POC: SHANNON N. OUIMET-AMARO, MSgt, USAF COMM

(210) 338-3388 Cell: 704-999-5167 shannon.n.ouimet-amaro.mil@health.mil

DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil

Destination Instructions: Delivery to:

Biomedical Technician Workspace/1st Floor Air Force Medical Command (AFMEDCOM/A4/10W) Logistics and Installation Support Directorate 601 Davy Crockett Rd Bldg. 1534 J BSA Lackland-Kelly, TX 78226 POC: SHANNON N. OUIMET-AMARO, MSgt, USAF COMM

(210) 338-3388 Cell: 704-999-5167 shannon.n.ouimet-amaro.mil@health.mil

DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil

Destination Instructions: Delivery to:

Biomedical Technician Workspace/1st Floor Air Force Medical Command (AFMEDCOM/A4/10W) Logistics and Installation Support Directorate 601 Davy Crockett Rd Bldg. 1534 J BSA Lackland-Kelly, TX 78226 POC: SHANNON N. OUIMET-AMARO, MSgt, USAF COMM

(210) 338-3388 Cell: 704-999-5167 shannon.n.ouimet-amaro.mil@health.mil

DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil

Destination Instructions: Delivery to:

Biomedical Technician Workspace/1st Floor Air Force Medical Command (AFMEDCOM/A4/10W) Logistics and Installation Support Directorate 601 Davy Crockett Rd Bldg. 1534 J BSA Lackland-Kelly, TX 78226 POC: SHANNON N. OUIMET-AMARO, MSgt, USAF COMM

(210) 338-3388 Cell: 704-999-5167 shannon.n.ouimet-amaro.mil@health.mil

DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil

Destination Instructions: Delivery to:

Biomedical Technician Workspace/1st Floor Air Force Medical Command (AFMEDCOM/A4/10W) Logistics and Installation Support Directorate 601 Davy Crockett Rd Bldg. 1534 J BSA Lackland-Kelly, TX 78226 POC: SHANNON N. OUIMET-AMARO, MSgt, USAF COMM

(210) 338-3388 Cell: 704-999-5167 shannon.n.ouimet-amaro.mil@health.mil

DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil Telephone: 2103383391

Deliveries or Performance

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery On Or Before Delivery Date 30 Sep 2026

20 Each Place of Performance DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil Telephone: 2103383388

FoB Details Contractor Destination

Delivery On Or Before Delivery Date 30 Sep 2026

6 Each Place of Performance DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil Telephone: 2103383388

FoB Details Contractor Destination

Delivery On Or Before Delivery Date 30 Sep 2026

2 Each Place of Performance DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil Telephone: 2103383388

FoB Details Contractor Destination

Delivery On Or Before Delivery Date 30 Sep 2026

3 Each Place of Performance DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil Telephone: 2103383388

FoB Details Contractor Destination

Delivery On Or Before Delivery Date 30 Sep 2026

1 Each Place of Performance DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil Telephone: 2103383388

FoB Details Contractor Destination

Delivery On Or Before Delivery Date 30 Sep 2026

4 Each Place of Performance DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil Telephone: 2103383388

FoB Details Contractor Destination

Delivery On Or Before Delivery Date 30 Sep 2026

20 Each Place of Performance DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil Telephone: 2103383388

FoB Details Contractor Destination

Delivery On Or Before Delivery Date 30 Sep 2026

8 Each Place of Performance DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil Telephone: 2103383388

FoB Details Contractor Destination

Delivery On Or Before Delivery Date 30 Sep 2026

1 Each Place of Performance DoDAAC: F1ATB2 CountryCode: USA

F1ATB2 AFMRA SG4

AF NO MILSBILLS PROC CP, 693 NEIMAN STREET

FORT DETRICK, MD 21702-5006

UNITED STATES

SHANNON N. OUIMET-AMARO

Email: shannon.n.ouimet-amaro.mil@health.mil Telephone: 2103383388

FoB Details Contractor Destination

Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Electronic invoicing.

Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before WAWF training.

submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. WAWF methods of document submission.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract WAWF payment instructions.

or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

2 IN 1 COMBO

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

2 IN 1 COMBO

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment Document routing.

requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC F1ATB2

Issue By DoDAAC FA3016

Admin DoDAAC FA3016

Inspect By DoDAAC F1ATB2

Ship To Code F1ATB2

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) F1ATB2

Service Acceptor (DoDAAC) F1ATB2

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the Payment request.

payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Shannon Ouimet-Amaro, SMSgt at shannon.n.ouimet-amaro.mil@health.mil or Contract Specialist Dionne Harris at dionne.harris@us.af.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Special Contract Requirements Deliver to:

Biomedical Technician Workspace/1st Floor Air Force Medical Command (AFMEDCOM/A4/10W) Logistics and Installation Support Directorate 601 Davy Crockett Rd Bldg. 1534 J BSA Lackland-Kelly, TX 78226 POC: SHANNON N. OUIMET-AMARO, MSgt, USAF COMM

(210) 338-3388 Cell: 704-999-5167 shannon.n.ouimet-amaro.mil@health.mil

Contract Clauses Department of War -Air Force Mandatory Clause Verbiage

AETC Ombudsman

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee employer actions, contests of OMB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, the AFICA Ombudsman supporting AETC is the Deputy Director of Contracting, AFICA/KT (OL-AET), 2035 First Street West, JBSA Randolph TX 78150- 4304, telephone 210-652-1722 (DSN 487-1722). The alternate Ombudsman is the Chief, Clearance & Program Support Division, AFICA/KTC, 2035 First Street West, JBSA Randolph TX 78150-4304, telephone 210-652-7075 (DSN 487-7075). As a matter of procedure, once the Ombudsman has been contacted, s/he will issue a notification to the CONS stating the Ombudsman is engaged and will ask the CONS not to take further action to the acquisition without coordination with the Ombudsman. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number

(571) 256-2431.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer.

Elimination of Use of Class I Ozone Depleting Substances (ODS)

(a) Contractors shall not:

(1) Provide any service or product with any specification, standard, drawing, or other document that requires the use of a Class I ODS in the test, operation, or maintenance of any system, subsystem, item, component, or process; or

(2) Provide any specification, standard, drawing, or other document that establishes a test, operation, or maintenance requirement that can only be met by use of a Class I ODS as part of this contract/order.

(b) For the purposes of Department of the Air Force policy, the following products that are pure (i.e., they meet the relevant product specification identified in AFI 32-7086) are Class I ODSs:

(1) Halons: 1011, 1202, 1211, 1301, and 2402;

(2) Chlorofluorocarbons (CFCs): CFC-11, CFC-12, CFC-13, CFC-111, CFC-112, CFC-113, CFC-114, CFC-115, CFC-211, CFC-212, CFC-213, CFC-214, CFC-215, CFC-216, and CFC-217, and the blends R-500, R-501, R-502, and R-503; and

(3) Carbon Tetrachloride, Methyl Chloroform, and Methyl Bromide.

[NOTE: Material that uses one or more of these Class I ODSs as minor constituents do not meet the Department of the Air Force definition of a Class I ODS.]

Health and Safety on Government Installations

(a) In performing work under this contract on a Government installation, the contractor (1)Take all reasonable steps and precautions to prevent accidents and preserve the health and safety of contractor and Government personnel performing or in any way coming in contact with the performance of this contract; and (2)Take such additional immediate precautions as the contracting officer may reasonably require for health and safety purposes.

(b)The contracting officer may, by written order, direct Air Force Occupational Safety and Health (AFOSH) Standards and/or health/safety standards as may be required in the performance of this contract and any adjustments resulting from such direction will be in accordance with the Changes clause of this contract.

(c)Any violation of these health and safety rules and requirements, unless promptly corrected as directed by the contracting officer, shall be grounds for termination of this contract in accordance with the Default clause of this contract.

Contractor Access to Air Force Installations (a)The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Department of the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation.

(b)The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or Security Forces for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver's license, current vehicle registration, valid vehicle insurance certificate, and [ insert any additional requirements to comply with local security procedures ] to obtain a vehicle pass.

(c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

(d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with [insert any additional requirements to comply with AFI 31-101 , Integrated Defense, and DODMAN5200.02_AFMAN 16-1405 , Air Force Personnel Security Program ] citing the appropriate paragraphs as applicable.

(e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

(f) The contractor shall provide an after-hours contact number or after-hours email in the Emergency Mass Notification System (EMNS) for each of their personnel, whose normal place of duty is on a DoD installation or within a DoD facility. The contractor shall comply with any additional requirements in DAFMAN 10-206 for emergency operational reporting. Foreign Nationals may participate and may remove themselves from the Emergency Mass Notification System at any time. To update information, personnel can access the globe icon on their system desktop screens and choose the "Access Self-Service" option.

(g) Failure to comply with these requirements may result in withholding of final payment.

FAR Clauses Incorporated by Reference

Number Title Effective Date Alternate/ Deviation

Variation Effective Date

52.203-3 Gratuities. Apr 1984 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038) Feb 2026 52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-O0038) Feb 2026

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026-O0038) Feb 2026 52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026-O0038) Feb 2026 52.219-6 Notice of Total Small Business Set-Aside. (Deviation 2026-O0038) Feb 2026 52.222-3 Convict Labor. (Deviation 2026-O0038) Feb 2026 52.222-19 Child Labor-Cooperation with Authorities and Remedies. (Deviation 2026-O0038) Mar 2026 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-O0038) Feb 2026 52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) Feb 2026 52.222-90 Addressing DEI Discrimination by Federal Contractors. (Deviation 2026-O0040, Revision 1) Apr 2026 52.223-23 Sustainable Products. (Deviation 2026-O0038) Feb 2026 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.233-3 Protest after Award. (Deviation 2026-O0038) Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038) Feb 2026 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) Feb 2026 52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-O0038) Apr 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024 252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services. Jan 2023 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7001 Buy American and Balance of Payments Program. Feb 2024 252.225-7002 Qualifying Country Sources as Subcontractors. Mar 2022 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023 252.232-7010 Levies on Contract Payments. Dec 2006 252.247-7023 Transportation of Supplies by Sea. Oct 2024

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

N/A

N/A

N/A

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

N/A

N/A

N/A

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .N/A

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .N/A

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) The Contractor shall ensure that- Data syntax and semantics of unique item identifiers.

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) . Unique item identifier

(i) The Contractor shall-

(A) Determine whether to-

Serialize within the enterprise identifier; (1)

Serialize within the part, lot, or batch number; or (2)

Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (3)

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL- STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number , Unique Item Identifier Report for Embedded Items, Contract Data Requirements N/A List, DD Form 1423.

(g) . If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this Subcontracts clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

List of Attachments

Number Attachment Name Attachment Description Reference Identifier Date Line Item

Attachment 3 Statement of Work

(SOW)

Performance Work Statement Attachment 3 Statement of Work

13 Aug

Attachment 4 BMET Furniture Package Floorplan and Photos

Drawings Attachment 4 BMET Furniture Package Floorplan and Photos

14 Aug

Representations, Certification, & Other Statements

FAR Clauses Incorporated by Reference

Number Title Effective Date Alternate/ Deviation

Variation Effective Date

52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026-O0038) Feb 2026

DFARS Clauses Incorporated by Reference

Number…