SC18008_AOC_IFB Calcs 20200408.pdf

Architect of the Capitol

Thurgood Marshall Federal Judiciary Building

AO Space Realignments Tasks 2 & 4

AOC Contract No.: AOC14C3002

Requisition/Purchase Request No.: SCA180135 AOC Project Nos. SC18008 Issue For Bid Calculations

08 April 2020

PROPERTY OF THE UNITED STATES GOVERNMENT CONTROLLED

UNCLASSIFIED INFORMATION // LAW ENFORCEMENT SENSITIVE

COPYING, DISSEMINATION, OR DISTRIBUTION OF THESE DRAWINGS,

PLANS OR

SPECIFICATIONS TO UNAUTHORIZED USERS IS PROHIBITED

Do not remove this notice

Properly destroy documents when no longer needed

ISSUE FOR BID DOCUMENTS

April 08, 2020 AOC Contract No. AOC14C3002-T032 AOC Project Nos. SC18008

The format, content and numbering sequence of this Report are based on the Design Requirements for Medium Projects contained in Part 4.6 of the A/E Design Manual – Office of Architect of the Capitol, December 2018.

TABLE OF CONTENTS

SECTION 4.6.6 ISSUE FOR BID DOCUMENTS SUBMISSION

DESIGN CALCULATIONS AND PRODUCT LITERATURE

APPENDIX A MECHANICAL CALCULATIONS & CUT SHEETS 3

APPENDIX B ELECTRICAL CALCULATIONS & CUT SHEETS 29

//CONTROLLED//

//CONTROLLED// 1

This page is intentionally left blank

//CONTROLLED// 2

APPENDIX A

Mechanical Calculations & Cut Sheets

//CONTROLLED// 3

//CONTROLLED// 4

AOC TMFJB Design Bundle (Tasks 2 & 4)

Mechanical Engineering

Calculation Book

IFB Submission

Rev No Comments Approved Date

Prepared by: …………………………… Approved by: ……………………………… L. Kelly T. Metz

//CONTROLLED// 5

DP 4-2 TOC-ME, February 2010

Calculation Book Cover Page & Mechanical Engineering Table of Contents Calculation Book

Client

AOC

Project Title TMFJB Design Bndl

Project Number 60593208

Department:

Mechanical

By Initialing the boxes below, this indicates that the Calculations have been reviewed and checked in accordance with AECOM Design Guidelines DP 4-2 Attachment 3

Department Manager:

Troy Metz Checker/Reviewer: Troy Metz o Independent Review Required

Design Level o Concept o Schematic o Preliminary Design o Design Development o50% CD o 100%

CD

o IFC n IFB% 04/08/20

By/Date / Section

# Calculation Title Made

By Date Dept

Checked By

Date Independent Review

By

Date Comments

1 Basis of Design LK 12/03/19 TM 12/03/19

2 Air Handling and Ventilation Systems LK 04/01/20 TM 04/01/20

3 Equipment Selections LK 12/03/19 TM 12/03/19

//CONTROLLED// 6

Section 1 – Basis of Design

//CONTROLLED// 7

Project AOC TMFJB Design Bundle and Conference Center

Project No. 60593208 Task 2 & 4 Date 04/01/2020 Originator LK Reviewer TM

Dept. Mechanical Rev Date Calc # Sheet 1 of 1

Contents HVAC Design Basis

Project Location Washington, DC Latitude: º- ’, Longitude: º-

Heating Degree Days: , Cooling Degree Days:

Outdoor Design Temperature (Degree F)

Function Summer Winter Source of Design

TemperaturesDB WB DB WB

AOC TMFJB 95 79 0 1

Indoor Design Temperature (Degree F)

Design Area Summer Winter Source of Design

TemperaturesDB %RH DB %RH Office 73 50 70 40 1

Conference Rooms 73 55 70 40 1 ADP Rooms 80 55 65 20 1

Mechanical/Electrical Space 85 60 60 20 1

Applicable Codes and Criteria Ref # Title Date

1 AOC Design Guide Dec. 2018 2 International Building Code 2015 3 ASHRAE Handbook of Fundamentals 2013 4 International Mechanical Code 2015

Notes :

UC - Uncontrolled UC* – Uncontrolled, 50% RH Cooling Design Point MV - Mechanical Ventilation

//CONTROLLED// 8

A. People Heat Loads:

Description Heat Load (BTU/hr/person) Ref #Sensible Latent

Moderate Office Work 250 200 3

Notes: Heat loads based on ASHRAE Chapter 18, Table 1.

B. Lighting Loads:

Description Watts/Square Feet Ref #

Offices 1.11 3 Conference/meeting/multipurpose 1.23 3

Notes: Lighting density from ASHRAE Fundamentals 2013, Chapter 18-Table 2.

C. Equipment Load:

Equipment Watts Ref #

Computer, Desktop w/ Monitor 130 3 Reach-in Refrigerator 350 3 55 inch LED TV 150 * Notes: *TV power based on manufacturer data with safety factor.

D. Ventilation:

Description Airflow Rate

(CFM/person) Airflow Rate

(CFM/ft2) Occupant Density

(#/1000SF)

Ref #

Corridor 0 0.06 0 2 Office Space 5 0.06 5 2 Conference Room 5 0.06 50 2 Notes: Default occupant densities used for areas in load and ventilation calculations where actual density is unknown.

E. Exhaust Rates:

Description Exhaust Airflow

Rate

(CFM/SF)

Ref #

Toilet Rooms 50 CFM/Fixture 2 Shower 20 CFM/Head 2

//CONTROLLED// 9

Section 4 – Air Handling Ventilation Systems

//CONTROLLED// 10

AHU-10 AHU-11 AHU-12

ROOM Voz (CFM) Primary

SA (CFM) Total CFM 9000 11500 11500

2-200 WKSTNS 213 799 OA CFM 2400 2800 2800

2-202 PANTRY WKRM 15 56 OA % 26.7 24.3 24.3

2-203 G OFFICE 15 56

2-204 G OFFICE 15 56

2-205 WKSTNS 157 589

2-206 WKSTNS 224 840

2-207 G OFFICE 23 86

2-208 WKRM 14 53

2-209 WKSTNS 79 296

2-301 RECEP 40 150

2-302 WKRM 27 101

2-303 WSTNS 183 686

2-304 G OFFICE 23 86

2-305 G OFFICE 23 86

2-306 LOCKERS 24 90

2-307 WET PANTRY 34 128

2-308 WKSTNS 117 439

2-309 WKSTNS 133 499

2-310 G OFFICE 17 64

2-311 WKRM 23 86

AHU-10 TOTAL (CFM) 654 2,452

AHU-11 TOTAL (CFM) 572 2,145

AHU-12 TOTAL (CFM) 173 649

Overall Totals 1,399 5,246

Task 2a Ventilation Calculations

//CONTROLLED// 11

Project:

Project No. 60593208 Task 2a Date Orig. Reviewer Dept. Mechanical Contents AHU-10/11/12

Zd,max Evz,max Setback Min/Max

Min Setpoint

Vpz,min

(CFM)

Zd,min Evz,min

2-200 WKSTNS Office Space 1,987 No 5 10 5.0 0.06 170 213 0 1.000 0 2-202 PANTRY WKRM Office Space 102 Yes 1 5.0 0.06 12 15 0 1.000 0 2-203 G OFFICE Office Space 101 Yes 1 5.0 0.06 12 15 0 1.000 0 2-204 G OFFICE Office Space 101 Yes 1 5.0 0.06 12 15 0 1.000 0 2-205 WKSTNS Office Space 1,412 No 5 8 5.0 0.06 125 157 0 1.000 0 2-206 WKSTNS Office Space 2,059 No 5 11 5.0 0.06 179 224 0 1.000 0 2-207 G OFFICE Office Space 121 Yes 2 5.0 0.06 18 23 0 1.000 0 2-208 WKRM Office Space 100 Yes 1 5.0 0.06 11 14 0 1.000 0 2-209 WKSTNS Office Space 714 No 5 4 5.0 0.06 63 79 0 1.000 0 2-301 RECEP Office Space 361 Yes 2 5.0 0.06 32 40 0 1.000 0 2-302 WKRM Office Space 180 Yes 2 5.0 0.06 21 27 0 1.000 0 2-303 WKSTNS Office Space 1,671 No 5 9 5.0 0.06 146 183 0 1.000 0 2-304 G OFFICE Office Space 133 Yes 2 5.0 0.06 18 23 0 1.000 0 2-305 G OFFICE Office Space 131 Yes 2 5.0 0.06 18 23 0 1.000 0 2-306 LOCKERS Office Space 225 Yes 1 5.0 0.06 19 24 0 1.000 0 2-307 WET PANTRY Break rooms 278 Yes 2 5.0 0.06 27 34 0 1.000 0 2-308 WKSTNS Office Space 1,040 No 5 6 5.0 0.06 93 117 0 1.000 0 2-309 WKSTNS Office Space 1,678 Yes 1 5.0 0.06 106 133 0 1.000 0 2-310 G OFFICE Office Space 121 Yes 1 5.0 0.06 13 17 0 1.000 0 2-311 WKRM Office Space 133 Yes 2 5.0 0.06 18 23 0 1.000 0

Zone 1 12,648 69 1,113 1,399 0 1.000 Total: 12,648 69 0 0

Xs,Max = Xs,Min =

0 CFM L/s 0 CFM L/s 0 CFM L/s

XS = Average Outdoor Air Fraction (Vou/∑ALL ZONESVpz #DIV/0! #DIV/0!

Corrected Amount of Outside Air [Vou / Ev] = 0 Exhaust Air + Pressurization CFM = 0 Amount of Ventilation Air Needed = 0

Ev = System ventilation efficiency 0.00 D = Occupancy diversity, PS+ΣALL ZONESPZ 1.00 Vou = Uncorrected outside air intake 1,104

Air Distribution Configuration:

Ceiling supply of warm air 15°F (8°C) or more above space temperature and ceiling return

Ez = Zone Air Distribution Effectiveness 0.8

Page

Max Setpoint Vpz,max

(CFM)

Max Airflow Ventilation Calcs Min Airflow Ventilation Calcs

# / 1000 SF # People

TMFJB Design Bundle

12/3/2019 LK TM

Room No. / Name Occupancy Category Az (sqft)

People Known

Occupant Density

Rp (CFM / person)

Ra

(CFM /

sqft)

Vbz

(CFM)

Voz (CFM)

Outside Air Calculation - 62.1-2010 Revision

Date Calc No.

April 2014 OA (62.1); Task 2a Ventilation.xlsm

Task 2a Ventilation Calculations//CONTROLLED//

//CONTROLLED// 12

AHU-29 AHU-30 AHU-31

Primary

SA (CFM) Total CFM 10000 11500 10500

5-230 WKSTNS 154 592 OA CFM 2600 2800 2700

5-231 I OFFICE 40 154 OA % 26.0 24.3 25.7

5-232 G OFFICE 29 112

5-233 G OFFICE 17 65

5-234 G OFFICE 17 65

5-235 G OFFICE 17 65

5-236 G OFFICE 17 65

5-237 G OFFICE 32 123

5-238 GETAWAY BOOTH 19 73

5-239 GETAWAY BOOTH 19 73

5-240 GETAWAY BOOTH 19 73

5-241 GETAWAY BOOTH 19 73

5-242 HOTEL 23 88

5-243 WET PNTRY WKRM 49 188

5-244 WKSTNS 382 1469

5-245 WKRM 27 104

5-246 LOCKERS 45 173

5-400 WKSTNS 249 958

5-401 WKSTNS 214 823

5-402 WKSTNS 163 627

5-403 WET PANTRY/WKSTN 43 165

AHU-29 TOTAL (CFM) 380 1,460

AHU-30 TOTAL (CFM) 688 2,646

AHU-31 TOTAL (CFM) 72 276

Overall Totals 1,140 4,382

Task 2b Ventilation Calculations//CONTROLLED//

//CONTROLLED// 13

Project No. 60593208 Task 2b Date Orig. Reviewer Dept. Mechanical Contents AHU-29/30/31

Zd,max Evz,max Setback Min/Max

Min Setpoint

Vpz,min

(CFM)

Zd,min Evz,min

5-230 WKSTNS Office Space 1,117 Yes 11 5.0 0.06 123 154 0 1.000 0 5-231 I OFFICE Office Space 275 Yes 3 5.0 0.06 32 40 0 1.000 0 5-232 G OFFICE Office Space 205 Yes 2 5.0 0.06 23 29 0 1.000 0 5-233 G OFFICE Office Space 128 Yes 1 5.0 0.06 13 17 0 1.000 0 5-234 G OFFICE Office Space 131 Yes 1 5.0 0.06 13 17 0 1.000 0 5-235 G OFFICE Office Space 131 Yes 1 5.0 0.06 13 17 0 1.000 0 5-236 G OFFICE Office Space 130 Yes 1 5.0 0.06 13 17 0 1.000 0 5-237 G OFFICE Office Space 236 Yes 2 5.0 0.06 25 32 0 1.000 0 5-238 GETAWAY BOOTH Office Space 67 Yes 2 5.0 0.06 15 19 0 1.000 0 5-239 GETAWAY BOOTH Office Space 70 Yes 2 5.0 0.06 15 19 0 1.000 0 5-240 GETAWAY BOOTH Office Space 69 Yes 2 5.0 0.06 15 19 0 1.000 0 5-241 GETAWAY BOOTH Office Space 67 Yes 2 5.0 0.06 15 19 0 1.000 0 5-242 HOTEL Conference/meeting 133 Yes 2 5.0 0.06 18 23 0 1.000 0 5-243 WET PNTRY WKRM Break rooms 218 Yes 5 5.0 0.06 39 49 0 1.000 0 5-244 WKSTNS Office Space 3,580 No 5 18 5.0 0.06 305 382 0 1.000 0 5-245 WKRM Office Space 174 Yes 2 5.0 0.06 21 27 0 1.000 0 5-246 LOCKERS Office Space 336 Yes 3 5.0 0.06 36 45 0 1.000 0 5-400 WKSTNS Office Space 1,220 Yes 25 5.0 0.06 199 249 0 1.000 0 5-401 WKSTNS Office Space 1,180 Yes 20 5.0 0.06 171 214 0 1.000 0 5-402 WKSTNS Office Space 1,161 Yes 12 5.0 0.06 130 163 0 1.000 0 5-403 WET PANTRY/WKSTN Break rooms 219 Yes 4 5.0 0.06 34 43 0 1.000 0

Zone 1 10,847 121 1,268 1,594 0 1.000 Total: 10,847 121 0 0

Page

Max Setpoint Vpz,max

(CFM)

Max Airflow Ventilation Calcs Min Airflow Ventilation Calcs

# / 1000 SF # People

TMFJB Design Bundle

12/3/2019 LK TM

Room No. / Name Occupancy Category Az

(sqft)

People Known

Occupant Density

Rp (CFM / person)

Ra

(CFM /

sqft)

Vbz

(CFM)

Voz

(CFM)

Outside Air Calculation - 62.1-2010 Revision

Date 4/1/2020 Calc No.

April 2014 OA (62.1); Task 2b Ventilation.xlsm

Task 2b Ventilation Calculations//CONTROLLED//

//CONTROLLED// 14

AHU-26 AHU-27

Primary

SA (CFM) Total CFM 10000 10000

4-179 COPY 48 185 OA CFM 2600 2600

4-180 F OFFICE 24 92 OA % 26.0 26.0

4-189 CONF 173 665

4-190 PANTRY 40 154

4196-TOILET 4 15

4-192 CLOSET 3 12

4-191 I OFFICE 54 208

4-188 RECEP 128 492

4-194OFFICE 40 154

4-201 OFFICE 20 77

4-195 OFFICE 19 73

4-200 HUDDLE 15 58

4-196 OFFICE 19 73

4-199 WKRM 23 88

4-197 OFFICE 19 73

4-198 OFFICE 19 73

AHU-26 TOTAL (CFM): 575 2,211

AHU-27 TOTAL (CFM): 54 208

Overall Totals: 629 2,419

Task 4 Ventilation Calculations

//CONTROLLED// 15

Project No. 60593208 Task 4 Date Orig. Reviewer Dept. Mechanical Contents AHU 26/27

Zd,max Evz,max Setback Min/Max

Min Setpoint

Vpz,min

(CFM)

Zd,min Evz,min

4-179 COPY Office Space 452 Yes 2 5.0 0.06 38 48 0 1.000 0 4-180 F OFFICE Office Space 220 Yes 1 5.0 0.06 19 24 0 1.000 0 4-189 CONF Conference/meeting 633 Yes 20 5.0 0.06 138 173 0 1.000 0 4-190 PANTRY Breakrooms 266 Yes 0 5.0 0.12 32 40 0 1.000 0 4196-TOILET Break rooms 38 Yes 0 5.0 0.06 3 4 0 1.000 0 4-192 CLOSETOccupiable storage rooms for dry materials17 Yes 0 5.0 0.06 2 3 0 1.000 0 4-191 I OFFICE Office Space 538 Yes 2 5.0 0.06 43 54 0 1.000 0 4-188 RECEP Reception Areas 1,280 Yes 5 5.0 0.06 102 128 0 1.000 0 4-194OFFICE Office Space 357 Yes 2 5.0 0.06 32 40 0 1.000 0 4-201 OFFICE Office Space 170 Yes 1 5.0 0.06 16 20 0 1.000 0 4-195 OFFICE Office Space 152 Yes 1 5.0 0.06 15 19 0 1.000 0 4-200 HUDDLE Office Space 112 Yes 1 5.0 0.06 12 15 0 1.000 0 4-196 OFFICE Office Space 151 Yes 1 5.0 0.06 15 19 0 1.000 0 4-199 WKRMOccupiable storage rooms for dry materials132 Yes 2 5.0 0.06 18 23 0 1.000 0 4-197 OFFICE Office Space 152 Yes 1 5.0 0.06 15 19 0 1.000 0 4-198 OFFICE Office Space 152 Yes 1 5.0 0.06 15 19 0 1.000 0

0 1.000 Zone 1 4,822 40 515 648 0 1.000 Total: 4,822 40 0 0

Page

Max Setpoint

Vpz,max

(CFM)

Max Airflow Ventilation Calcs Min Airflow Ventilation Calcs

# / 1000 SF # People

TMFJB Design Bundle and Conference/Hoteling Center

12/3/2019 LK TM

Room No. / Name Occupancy Category

Az

(sqft)

People Known

Occupant Density

Rp (CFM / person)

Ra

(CFM /

sqft)

Vbz

(CFM)

Voz

(CFM)

Outside Air Calculation - 62.1-2010 Revision

Date Calc No.

April 2014 OA (62.1); Task 4 Ventilation.xlsm

Task 4 Ventilation Calculations//CONTROLLED//

//CONTROLLED// 16

Section 3 – Equipment Cut Sheets_____

//CONTROLLED// 17

UNT-PRC001L-EN 35

Performance Data

Low Vertical Cabinet and Low Vertical Concealed

AHRI cooling performance is based on 80/67°F entering air temperature, 45°F entering chilled water temperature with a 10°F ΔT.

Heating performance is based on 70°F entering air temperature, 180°F entering hot water temperature with a 30°F ΔT.

All performance measured on high speed tap, 115 V, zero ESP, with throwaway filter. Free discharge EC motor. See Table 6, p. 26 for performance groupings.

Table 15. 2-pipe performance—free discharge EC motor

Size Coil Unit Type

Airflow (cfm)

Cooling Heating

Motor Power (W)

Total Capacity (MBh)

Sensible Capacity (MBh)

Flow Rate

(gpm)

WPD

(ft H20)

Total Capacity (MBh) Q/ITD

Flow Rate

(gpm)

WPD

(ft H20)

2HC Cabinet 285 6.58 5.24 1.31 2.16 19.51 0.18 1.30 1.79 28

2HC Concealed 285 6.58 5.24 1.31 2.16 19.51 0.18 1.30 1.79 28

3HC Concealed 255 7.50 5.29 1.49 3.37 22.51 0.20 1.50 3.13 28

2HC Cabinet 380 10.70 7.70 2.13 6.31 27.28 0.25 1.82 3.95 50

2HC Concealed 380 10.70 7.70 2.13 6.31 27.28 0.25 1.82 3.95 50

3HC Concealed 350 9.94 7.35 1.98 1.69 30.71 0.28 2.05 1.59 50

2HC Cabinet 551 12.04 9.87 2.40 2.12 37.45 0.34 2.49 2.08 66

2HC Concealed 551 12.04 9.87 2.40 2.12 37.45 0.34 2.49 2.08 66

3HC Concealed 492 14.33 10.10 2.86 3.69 43.29 0.39 2.88 3.33 66

Table 16. 4-pipe performance—free discharge EC motor

Size Coil Unit Type

Airflow (cfm)

Cooling Heating

Motor Power (W)

Total Capacity (MBh)

Sensible Capacity (MBh)

Flow Rate

(gpm)

WPD

(ft H20)

Total Capacity (MBh) Q/ITD

Flow Rate

(gpm)

WPD

(ft H20)

2C/1H Cabinet 255 6.02 4.76 1.20 1.84 10.89 0.10 0.73 1.47 28

2C/2H Concealed 239 5.68 4.48 1.13 1.66 17.02 0.15 1.13 1.39 28

3C/1H Concealed 239 7.05 4.96 1.41 3.40 10.39 0.09 0.69 1.35 28

2C/1H Cabinet 350 9.95 7.10 1.98 5.53 15.60 0.14 1.04 3.58 50

2C/2H Concealed 320 9.13 6.46 1.82 4.74 23.64 0.21 1.57 3.04 50

3C/1H Concealed 320 8.87 6.59 1.77 1.37 14.52 0.13 0.97 3.15 50

2C/1H Cabinet 492 10.99 8.99 2.19 1.79 21.80 0.20 1.45 7.76 66

2C/2H Concealed 449 9.89 8.19 1.97 1.47 31.87 0.29 2.12 1.54 66

3C/1H Concealed 449 13.33 9.37 2.66 3.23 20.31 0.18 1.35 6.85 66

Note: Q/ITD = MBh (kW)/(Entering water temperature - Entering air temperature) when ∆T and gpm (L/s) remain constant. To determine heating capacities at a different entering water temperature or entering air temp, compute the new ITD and multiply it by the Q/ITD shown.

FCU-B

//CONTROLLED// 18

92 UNT-PRC001L-EN

Dimensions and Weights

Model L Low Vertical Cabinet

Figure 51. Model L Low vertical cabinet

4-7/16"

10 15/16 in. 10 15/16 in. 3 1/16 in.

12 1/4 in.

12 1/2 in.

3 7/8 in.

7 1/2 in.

9 13/16 in.

13 3/16 in.

2 3/8 in.

(2) 7/8 in. KO power wiring bottom only

(2) 1 3/32 in. KOs control wiring bottom only(4) Unit leveling devices

(optional)

(2) 5/8 in. dia keyslot hanger holes

Top outlet quadrifuser or bar grille

DC C

13 1/2 in.

1 15/16 in.

Air flow

Side View

(2) 5/8 in. dia keyslot hanger holes

7/8 in.

Front View LH Piping

Front View RH Piping

Unit control top

8 1/2 in.

Top View

1 13/16 in.1 13/16 in.

B7/8 in.

2 11/16 in.

11 5/16 in. 11 5/16 in.

6 7/16 in.

3 1/4 in.

Front inlet bar grille E

A

Bottom of control box

Control box

1 5/16 in.

14 1/2 in.

1 1/8 in.

Main drain connection for 7/8 in. OD copper tube and clamp

Secondary drain connection for 3/8 in. ID tube

Control box

2 in.

Auxiliary drain pan

Coil connections

Filters

64 15/16"

//CONTROLLED// 19

UNT-PRC001L-EN 93

Table 59. Model L Low vertical cabinet unit dimensions (in.) and weights (lb)

Unit Size 03 04 06 A 46 15/16 56 7/16 64 15/16 B 26 1/4 35 3/4 44 1/4 C 11 7/16 13 5/16 11 7/16 D 24 30 42 E 24 1/4 33 3/4 42 1/4

Operating Weight 125 155 164 Shipping Weight 112 139 148

Notes: Coil connections are always on the drain pan side and opposite the control box. Coil connections are 5/8-in. O.D. sweat. See p. 95 for locations.

All duct collar dimensions are to the outside of the collar. See p. 97 for dimensions for outside air openings.

Serviceability for some components within this unit may require panel or drain pan removal.

//CONTROLLED// 20

UNT-PRC001L-EN 9

Model Number Descriptions

UniTrane™ Fan Coil

Low Vertical Model

Following is a complete description of the UniTrane fan coil low height vertical model.

Digits 1, 2 — Unit Type FC = UniTrane Fan Coil

Digit 3 — Cabinet Type K = Low vertical concealed L = Low vertical cabinet

Digit 4 — Development Sequence B = Development sequence B

Digit 5,6,7 — Unit Size 030 = Unit size 03 040 = Unit size 04 060 = Unit size 06

Digit 8 — Unit Voltage 1 = 115v/60hz/1ph 2 = 208v/60hz/1ph 3 = 277v/60hz/1ph 4 = 230v/60hz/1ph

Digit 9 — Piping system/ placement C = Without piping, right hand, with aux drain pan D = Without piping, left hand, with aux drain pan J = With right hand piping K = With left hand piping

Digit 10,11 — Design Sequence ** = Factory assigned

Digit 12 — Inlet Style A = Front toe space inlet B = Front bar grille inlet

Digit 13 — Fresh Air Damper 0 = Without fresh air damper B = Manual fresh air damper, back opening E = Auto, 2 position damper, back opening

Digit 14 — Outlet Style G = Top quad grille outlet H = Top bar grille outlet J = Top duct collar outlet

Digit 15 — Unit Color 0 = Unpainted unit (concealed units) 1 = Deluxe Beige 2 = Soft Dove 3 = Cameo White 4 = Driftwood Grey 5 = Stone Grey 6 = Rose Mauve

Digit 16 — Tamperproof Locks and Leveling Feet 0 = Without locks or leveling feet B = Keylock access door D = Leveling feet F = Keylock access door with leveling feet

Digit 17 — Main Coil Type A = 2-row cooling/heating1

B = 3-row cooling/heating1

C = 4-row cooling/heating1

D = 2-row cooling, 1-row heating coil E = 2-row cooling, 2-row heating coil F = 3-row cooling, 1-row heating coil K = 2-row cooling/heating1 with electric heat coil P = 2-row cooling/heating1 with

1-row heating coil Q = 2-row cooling/heating1 with

2-row heating coil R = 3-row cooling/heating1 with

1-row heating coil X = 2-row cooling only, electric heat

Note: 1Designates coils provided with a changeover sensor.

Digit 18 — Coil air vent A = Auto air vent M = Manual air vent

Digit 19,20,21 — Electric Heat kW (208V derate) 000= Without electric heat 010 = 1.0 kW (0.75) 015 = 1.5 kW (1.1) 020 = 2.0 kW (1.5) 025 = 2.5 kW (1.9) 030 = 3.0 kW (2.3) 040 = 4.0 kW (3.0)

Digit 22 — Auxiliary Coil Type 0 = Without auxiliary option C = Electric heat

Digit 23 — Disconnect Switch 0 = Without disconnect switch D = With disconnect switch

Digit 24 — Filter Type 0 = Without filter 1 = 1 in. throwaway filter

Digit 25 — Main Control Valve X = Field-supplied N/O control valve Y = Field-supplied N/C control valve Z = Field-supplied 3-wire modulating control valve 1 = Field-supplied analog valve

(2-10VDC)

A = 2-way, 2-position, NO (30 psig)

Cv = 2.3 B = 3-way, 2-position, NO (28 psig)

Cv = 3.0 C = 2-way, 2-position, NC (30 psig)

Cv = 2.3 D = 3-way, 2-position, NC (20 psig)

Cv = 4.4 E = 2-way, 2-position, NO (50 psig)

Cv = 1.0 F = 3-way, 2-position, NO (28 psig)

Cv = 1.5 G = 2-way, 2-position, NC (50 psig)

Cv = 1.0 H = 3-way, 2-position, NC (28 psig)

Cv = 1.5 J = 2-way, modulating Cv=0.6

(60 psig) K = 3-way, modulating Cv=0.6

(60 psig) L = 2-way, modulating Cv=1.1

(60 psig) M = 3-way, modulating Cv=1.1

(60 psig) N = 2-way, modulating Cv=2.3

(60 psig) P = 3-way, modulating Cv=2.7

(60 psig) Q = 2-way, modulating Cv=3.3

(60 psig) R = 3-way, modulating Cv=3.8

(60 psig) 0 = Without cooling control valves 2 = 2 way, analog(2-10VDC), Cv=0.6

(60 psig) 3 = 3 way, analog(2-10VDC), Cv=0.6

(60 psig) 4 = 2 way, analog(2-10VDC), Cv=1.1

(60 psig) 5 = 3 way, analog(2-10VDC), Cv=1.1

(60 psig) 6 = 2 way, analog(2-10VDC), Cv=2.3

(60 psig) 7 = 3 way, analog(2-10VDC), Cv=2.7

(60 psig) 8 = 2 way, analog(2-10VDC), Cv=3.3

(60 psig) 9 = 3 way, analog(2-10VDC), Cv=3.8

(60 psig)

//CONTROLLED// 21

10 UNT-PRC001L-EN

Digit 26 — Auxiliary Control Valve X = Field-supplied N/O control valve Y = Field-supplied N/C control valve Z = Field supplied 3-wire modulating control valve 1 = Field-supplied analog valve

(2-10VDC)

A = 2-way, 2-position, NO (30 psig)

Cv = 2.3 B = 3-way, 2-position, NO (28 psig)

Cv = 3.0 C = 2-way, 2-position, NC (30 psig)

Cv = 2.3 D = 3-way, 2-position, NC (20 psig)

Cv = 4.4 E = 2-way, 2-position, NO (50 psig)

Cv = 1.0 F = 3-way, 2-position, NO (28 psig)

Cv = 1.5 G = 2-way, 2-position, NC (50 psig)

Cv = 1.0 H = 3-way, 2-position, NC (28 psig)

Cv = 1.5 J = 2-way, modulating, Cv=0.6

(60 psig) K = 3-way, modulating, Cv=0.6

(60 psig) L = 2-way, modulating, Cv=1.1

(60 psig) M = 3-way, modulating, Cv=1.1

(60 psig) N = 2-way, modulating, Cv=2.3

(60 psig) P = 3-way, modulating, Cv=2.7

(60 psig) Q = 2-way, modulating, Cv=3.3

(60 psig) R = 3-way, modulating, Cv=3.8

(60 psig) 0 = Without heating control valves 2 = 2-way, analog(2-10VDC), Cv=0.6

(60 psig) 3 = 3-way, analog(2-10VDC), Cv=0.6

(60 psig) 4 = 2-way, analog(2-10VDC), Cv=1.1

(60 psig) 5 = 3-way, analog(2-10VDC), Cv=1.1

(60 psig) 6 = 2-way, analog(2-10VDC), Cv=2.3

(60 psig) 7 = 3-way, analog(2-10VDC), Cv=2.7

(60 psig) 8 = 2-way, analog(2-10VDC), Cv=3.3

(60 psig) 9 = 3-way, analog(2-10VDC), Cv=3.8

(60 psig)

Digit 27 — Piping Packages/End Valves 0 = Without piping A = Basic ball valve supply and return B = Basic ball valve supply, manual circuit setter return D = Deluxe ball valve supply and return E = Deluxe ball valve supply, manual circuit setter return

Digit 28 — Control Type A = Fan speed control D = Tracer ZN010 E = Tracer ZN510 F = Tracer ZN520 H = Customer Supplied Terminal

Interface (CSTI) J = Tracer UC400 with single-zone

VAV

K = Tracer UC400 with AirFi™

Wireless Communications Interface (WCI)

Digit 29 — Control Option 0 = None D = Unit-mounted fan speed switch, line voltage K = Wall-mounted fan speed switch, line voltage V = Unit-mounted zone sensor

(OALMH and setpoint dial) 3 = Unit-mounted fan speed switch, low voltage W = Wall-mounted zone sensor

(OALMH and setpoint dial) X = Unit-mounted fan switch and wall-mounted setpoint dial Y = Unit-mounted fan switch and wall-mounted (setpoint, comm) Z = Unit-mounted temp sensor

(OALMH, SP, ON/CNC)

1 = Wall-mounted temp sensor

(OCC/UNOCC, COMM)

2 = Wall-mounted temp sensor

(OALMH,SP,O/C,COMM)

4 = Wall-mounted sensor (SP, OALMH, O/C,COM)

6 = Wireless temp sensor, unit receiver (SP) 7 = Wireless display sensor, unit rec (OALMH)

Digit 30 — Drain Pan Material 3 = Polymer drain pan 4 = Stainless steel drain pan

Digit 31 — FLA Motor Option 0 = Standard FLA ECM A = Reduced FLA ECM

Digit 32 — Control Function 2 0 = Without occupant call or IAQ status

Digit 33 — Control Function 3 0 = Without occupied/unoccupied or condensate overflow 2 = Condensate overflow detection

Digit 34 — Control Function 4 0 = Without smoke input or low limit detect 2 = Low limit detection

Digit 35 — Control Function 5 0 = Without external interlock or fan status

Digit 36 — Control Function 6 0 = Without motion input or filter status

//CONTROLLED// 22

6 UNT-PRC001L-EN

UniTrane™ Fan Coil

Following is a complete description of the UniTrane fan coil model number. Each digit in the model number has a corresponding code that identifies specific unit options.

Note: Not all options are available on all cabinet styles. Contact your local Trane sales representative for more information.

Digits 1, 2 — Unit Type FC = UniTrane fan coil

Digit 3 — Cabinet Type A = Vertical concealed B = Vertical cabinet C = Horizontal concealed D = Horizontal cabinet E = Horizontal recessed H = Vertical recessed J = Vertical slope-top cabinet P = Compact concealed

Digit 4 — Development Sequence B = Development Sequence B

Digits 5, 6, 7 — Unit Size 020 = Unit size 02 030 = Unit size 03 040 = Unit size 04 060 = Unit size 06 080 = Unit size 08 100 = Unit size 10 120 = Unit size 12

Digit 8 — Unit Voltage 1 = 115/60/1 2 = 208/60/1 3 = 277/60/1 4 = 230/60/1 9 = 220/50/1

Digit 9 — Piping System/ Placement A = No piping, RH, no auxiliary drain pan B = No piping, LH, no auxiliary drain pan C = No piping, RH, with auxiliary drain pan D = No piping, LH, with auxiliary drain pan E = No piping, RH, no auxiliary drain pan, extended end pipe side F = No piping, LH, no auxiliary drain pan, extended end pipe side G = No piping, RH, with auxiliary drain pan, extended end pipe side H = No piping, LH, with auxiliary drain pan, extended end pipe side J = With piping package, RH K = With piping package, LH L = With piping package, RH, extended end pipe side

M = With piping package, LH, extended end pipe side

N = No piping, RH, with auxiliary drain pan, extended end pipe and control side

P = No piping, LH, with auxiliary drain pan, extended end pipe and control side

Q = With piping package, RH, no auxiliary drain pan, extended end pipe and control side

R = With piping package, LH, no auxiliary drain pan, extended end pipe and control side

Digits 10, 11 — Design Sequence

Digit 12 — Inlets A = Front toe space B = Front bar grille C = Front stamped louver D = Bottom stamped louver E = Bottom toe space F = Back duct collar G = Back open return H = Back stamped louver K = Exposed fan (Model P only) L = Bottom filter (Model P only)

Digit 13 — Fresh Air Damper 0 = None A = Manual, bottom opening B = Manual, back opening C = Manual, top opening D = Auto, 2-position, bottom opening E = Auto, 2-position, back opening F = Auto, 2-position, top opening G = Auto, economizer, bottom opening H = Auto, economizer, back opening J = Auto, economizer, top opening K = No damper, bottom opening L = No damper, back opening M = No damper, top opening

Digit 14 — Outlets A = Front duct collar B = Front bar grille C = Front stamped louver D = Front quad grille G = Top quad grille H = Top bar grille J = Top duct collar

Digit 15 — Color 0 = No paint (concealed units only) 1 = Deluxe Beige 2 = Soft Dove 3 = Cameo White 4 = Driftwood Grey 5 = Stone Grey 6 = Rose Mauve

Digit 16 — Tamperproof Locks/ Leveling Feet 0 = None B = Keylock access door C = Keylock panel and access door D = Leveling feet F = Keylock access door with leveling feet G = Keylock panel and access door with leveling feet

Digit 17 — Motor A = Free discharge ECM B = High static ECM

Digit 18 — Coil A = 2-row cooling/heating1

B = 3-row cooling/heating1

C = 4-row cooling/heating1

D = 2-row cooling/1-row heating E = 2-row cooling/2-row heating F = 3-row cooling/1-row heating G = 2-row cooling only H = 3-row cooling only J = 4-row cooling only K = 2-row cooling/heating1 with electric heat L = 3-row cooling/heating1 with electric heat M = 4-row cooling/heating1 with electric heat P = 2-row cooling/heating1 with

1-row heating Q = 2-row cooling/heating1with

2-row heating R = 3-row cooling/heating1 with

1-row heating X = 2-row cooling only, electric heat Y = 3-row cooling only, electric heat Z = 4-row cooling only, electric heat 1 = 3-row cooling, 1-row heating with high capacity 2 = 3-row cooling/heating, 1-row heating with high capacity

Note: 1Designates coils provided with a changeover sensor.

Digit 19 — Drain Pan Material 3 = Polymer drain pan 4 = Stainless steel main drain pan

Digit 20 — Coil Air Vent A = Automatic air vent M = Manual air vent

Model Number Descriptions

FCU-A

//CONTROLLED// 23

UNT-PRC001L-EN 7

Digits 21, 22, 23 — Electric Heat kW (208V derate) 000= No electric heat 010 = 1.0 kW (0.75 kW) 015 = 1.5 kW (1.1 kW) 020 = 2.0 kW (1.5 kW) 025 = 2.5 kW (1.9 kW) 030 = 3.0 kW (2.3 kW) 040 = 4.0 kW (3.0 kW) 050 = 5.0 kW (3.8 kW) 060 = 6.0 kW (4.5 kW) 070 = 7.0 kW (5.3 kW) 080 = 8.0 kW (6.0 kW) 100 = 10.0 kW

Digit 24 — Reheat Coil 0 = None A = Steam coil B = Hot water coil D = High capacity hot water coil

Digit 25 — Disconnect Switch 0 = None D = Disconnect switch

Digit 26 — Filter 0 = None 1 = 1-in. throwaway filter 2 = 1-in. throwaway MERV 8 filter 3 = 1-in. throwaway, one extra 4 = 1-in. throwaway MERV 8, one extra 5 = 1-in. throwaway, two extras 6 = 1-in. throwaway MERV 8, two extras 7 = 1-in. throwaway, three extras 8 = 1-in. throwaway MERV 8, three extras A = 1-in. throwaway MERV 13 filter B = 1-in. throwaway MERV 13, one extra C = 1-in. throwaway MERV 13, two extras D = 1-in. throwaway MERV 13, three extras

Digit 27 — Main Control Valve 0 = None A = 2-way, 2-position, NO (30 psig) B = 3-way, 2-position, NO (28 psig) C = 2-way, 2-position, NC (30 psig) D = 3-way, 2-position, NC (20 psig) E = 2-way, 2-position, NO (50 psig) F = 3-way, 2-position, NO (28 psig) G = 2-way, 2-position, NC (50 psig) H = 3-way, 2-position, NC (28 psig) J = 2-way, 3-wire modulating,

0.6 Cv (60 psig)

K = 3-way, 3-wire modulating,

0.6 Cv (60 psig)

L = 2-way, 3-wire modulating,

1.1 Cv (60 psig)

M = 3-way, 3-wire modulating,

1.1 Cv (60 psig)

N = 2-way, 3-wire modulating,

2.3 Cv (60 psig)

P = 3-way, 3-wire modulating,

2.7 Cv (60 psig)

Q = 2-way, 3-wire modulating, 3.3Cv (60 psig)

R = 3-way, 3-wire modulating,

3.8 Cv (60 psig)

X = Field-supplied, NO Y = Field-supplied, NC Z = Field-supplied 3-wire modulating 1 = Field supplied analog valve

Digit 28 — Auxiliary Control Valve (Fan Coil only) 0 = None A = 2-way, 2-position, NO (30 psig) B = 3-way, 2-position, NO (28 psig) C = 2-way, 2-position, NC (30 psig) D = 3-way, 2-position, NC (20 psig) E = 2-way, 2-position, NO (50 psig) F = 3-way, 2-position, NO (28 psig) G = 2-way, 2-position, NC (50 psig) H = 3-way, 2-position, NC (28 psig) J = 2-way, 3-wire modulating,

0.6 Cv (60 psig)

K = 3-way, 3-wire modulating,

0.6 Cv (60 psig)

L = 2-way, 3-wire modulating,

1.1 Cv (60 psig)

M = 3-way, 3-wire modulating,

1.1 Cv (60 psig)

N = 2-way, 3-wire modulating,

2.3 Cv (60 psig)

P = 3-way, 3-wire modulating,

2.7 Cv (60 psig)

Q = 2-way, 3-wire modulating, 3.3Cv (60 psig) R = 3-way, 3-wire modulating,

3.8 Cv (60 psig)

X = Field-supplied, NO Y = Field-supplied, NC Z = Field-supplied 3-wire modulating 1 = Field supplied analog valve

Digit 29 — Piping Packages 0 = None A = Basic ball valve supply and return B = Basic ball valve supply/manual circuit setter C = Basic ball valve supply and return with auto circuit setter D = Deluxe ball valve supply and return E = Deluxe ball valve supply/manual circuit setter F = Deluxe ball valve supply and return with auto circuit setter

Digit 30 — Control Type A = Fan speed control E = Tracer ZN010 F = Tracer ZN510 G = Tracer ZN520 H = Customer Supplied Terminal

Interface (CSTI) J = Tracer UC400 with single-zone

VAV

K = Tracer UC400 with AirFi™

Wireless Communications Interface (WCI)

Digit 31 — Control Option V = Unit-mounted fan speed switch with setpoint dial zone sensor W = Wall-mounted fan speed switch with setpoint dial zone sensor X = Unit-mounted fan speed switch with wall-mounted setpoint dial zone sensor

Y = Unit-mounted fan speed switch and wall-mounted setpoint dial with comm.

Z = Unit-mounted fan speed switch, On/Cancel, setpoint dial with comm.

0 = Without control option 1 = Wall-mounted On/Cancel with comm.

2 = Wall-mounted fan speed switch, setpoint dial, On/Cancel with comm.

4 = Wall-mounted digital zone sensor (OALMH, setpoint, On/Cancel, comm jack)

5 = Wall-mounted digital zone sensor (On/Cancel, comm jack)

6 = Wireless zone sensor 7 = Wireless display sensor, unit-mounted receiver 8 = Unit-mounted variable speed control 9 = Wall-mounted variable speed control

Digit 32 — IAQ Options (Fan Coil only) 0 = Without IAQ options 1 = Dehumidification 4 = Dehumidification with sensor

Digit 33 —FLA Motor Option 0 = Standard FLA ECM mode A = Reduced FLA ECM mode

Digit 34 0 = None

Digit 35 — Control Function #3 (Fan Coil only) 0 = None 2 = Condensate overflow detection

Digit 36 — Control Function #4 (Fan Coil only) 0 = None 2 = Low temperature detection

Digits 37, 38 — Future Control Functions

//CONTROLLED// 24

8 UNT-PRC001L-EN

Digit 39 — Projection Panels and False Backs 0 = None A = 5/8-in. standard recessed panel

(vertical recessed units only) B = 2-in. projection panel C = 2.5-in. projection panel D = 3-in. projection panel E = 3.5-in. projection panel F = 4-in. projection panel G = 4.5-in. projection panel H = 5-in. projection panel J = 5.5-in. projection panel K = 6-in. projection panel L = 2-in. False back M = 3-in. False back N = 4-in. False back P = 5-in. False back Q = 6-in. False back R = 7-in. False back T = 8-in. False back

Digit 40 — Main Autoflow GPM

Digit 41 — Auxiliary Autoflow GPM (Fan Coil only)

Digit 42 — Subbases 0 = None A = 2-in. subbase B = 3-in. subbase C = 4-in. subbase D = 5-in. subbase E = 6-in. subbase F = 7-in. subbase

Digit 43 — Recessed Flange 0 = None A = Recessed flange

Digit 44 — Wall Boxes 0 = None A = Anodized wall box

0 = None H = 3.5

A = 0.5 J = 4.0

B = 0.75 K = 4.5

C = 1.0 L = 5.0

D = 1.5 M = 6.0

E = 2.0 N = 7.0

F = 2.5 P = 8.0

G = 3.0

0 = None H = 3.5

A = 0.5 J = 4.0

B = 0.75 K = 4.5

C = 1.0 L = 5.0

D = 1.5 M = 6.0

E = 2.0 N = 7.0

F = 2.5 P = 8.0

G = 3.0

//CONTROLLED// 25

78 UNT-PRC001L-EN

Model B Vertical Cabinet

Figure 44. Model B vertical cabinet

Top View (4) 5/8 in dia keyslot hanger holes

(4) Unit leveling devices (optional)

6 5/8 in.

1 in.

6 5/8 in.

6 1/2 in.

Unit control top

Top outlet quadrifuser or bar grille

C D C

(2) 5/8 in. bolt holes

6 in. 6 in.B

(4) 5/8 in. dia keyslot hanger holes

7/8 in. KO Control wiring

Front View RH Piping

Auxiliary control box optional

5 1/4 in.

6 11/16 in. Front inlet open or bar grille

4 7/16 in.

7 in. E

A

7 in.

8 in.

Control box

F Optional extended end pocket

Front View LH Piping Coil connections

Auxiliary drain pan

1 1/8 in.

Filters

Control box

1 5/8 in.

25 3/16 in.

15 1/2 in.

6 15/16 in.

5 1/16 in.

Secondary drain connection for 3/8 in. ID tube

Main drain connection for 7/8 in. OD copper tube and clamp

5 7/16 in.

1 9/16 in.

10 in.

Air flow

9 7/8 in.

Side View

Power wiring bottom only

2 7/8 in.

1 3/8 in.

7/8 in.

KO

1 3/32 in.

KO

Bottom View

Power wiring bottom and side

7/8 in.

KO

6 1/4 in. 6 1/2 in.

Back

Front 1 in.

2 5/8 in.

Front

Back

DETAIL A

Electric heat only

DETAIL B

Non-electric heat only

G Optional double extended end pocket

8 in.

See Detail A and Detail B for field power connections

Junction box (non-EH only)

Auxiliary box (EH only) Junction box (Non-EH only)

//CONTROLLED// 26

UNT-PRC001L-EN 79

Table 52. Model B Vertical cabinet unit dimensions (inches)

Unit Size 200-300 400 600 800 1000-1200 No. Fans 1 1 2 2 3

No. Motors 1 1 1 1 2 A 33 5/16 38 5/16 47 13/16 56 5/16 75 5/16 B 21 5/16 26 5/16 35 13/16 44 5/16 63 5/16 C 7 5/8 7 1/8 8 7/8 7 1/8 7 5/8 D 18 24 30 42 60 E 19 5/16 24 5/16 33 13/16 42 5/16 61 5/16 F 41 5/16 46 5/16 55 13/16 64 5/16 83 5/16 G 49 5/16 54 5/16 63 13/16 72 5/16 n/a

Notes: Coil connections are always on the drain pan side and opposite the control box. Coil connections are 5/8-in. O.D. sweat. See p. 95 for locations.

All duct collar dimensions are to the outside of the collar. See p. 97 for dimensions for outside air openings.

//CONTROLLED// 27

//CONTROLLED// 28

APPENDIX B

Electrical Calculations & Cut Sheets

//CONTROLLED// 29

//CONTROLLED// 30

AOC TMFJB Design Bundle – Task 2,4

Electrical Engineering

Calculation Book

Backcheck Submission

Rev No Comments Approved Date

Prepared by: …………………………… Approved by: ……………………………… D, Anderson A. Maheshwari

//CONTROLLED// 31

DP 4-2 TOC-ME, February 2010

Calculation Book Cover Page & Electrical Engineering Table of Contents Calculation Book

Client

AOC

Project Title TMFJB Design Bndl

Project Number 60593208

Department:

Electrical

Page 1 of

By Initialing the boxes below, this indicates that the Calculations have been reviewed and checked in accordance with AECOM Design Guidelines DP 4-2 Attachment 3

Department Manager:

Ashok Maheshwari Checker/Reviewer: Ashok Maheshwari o Independent Review Required

Design Level o Concept o Schematic o Preliminary Design o Design Development o50%

CD

n 100%

CD

o 100%

CD BC

o IFB%

CD

By/Date 6/15/19 12/10/

Section

# Calculation Title Made

By Date Dept

Checked By

Date Independent Review

By

Date Comments

1 Motor and Equipment Sizing KZ 9/28/19

2 Lighting Calculation DA 9/21/19

3 Lighting Cutsheets DA 12/10/19

//CONTROLLED//

//CONTROLLED// 32

Douglas.Anderson Rectangle

Section 1 – Motor and Equipment Sizing

//CONTROLLED// 33

TASK 13, 5

FCU-A, FCU-B:

FLA = 1.6

VOLT = 120 V

VA = 1.6 X 120 V = 192 VA ≈ 0.2 KVA

MIN. WIRE SIZE: 12 AWG

MAIN. OPD: 15 A, 1-POLE

Motor Equipment Calculation

//CONTROLLED// 34

Douglas.Anderson Text Box

TASK 2,4

Section 2 – Lighting Calculations

//CONTROLLED// 35

Text Box

A B C D E F G H I J K L

B.1 B.6

4.1

4.7

F.9

9.8

A

B

A

A A A

AA

B B

AA

A A

BB

A A A

B

A

A

B

A A

B

A

A

A

B

A A

B

A

A A

A

B

A

A

B B

A

A

A A A A A

B

A

A

A A

A

A

B

A

A A

A

AAAA A A A

A A A A A A

A A A A A A

A A A A A A

A A A A A A

A A A A

A A A A

B B

BB

B B

B B B B

A A A A AA

A A

39.8 32.0 25.7 26.4 33.9 42.3 41.9 32.3

16.9 25.6 33.0 33.5 27.8 22.8 23.0 28.5 35.1 35.9 27.9

19.3 23.2 23.3 18.2 21.1 23.3

19.9 30.3 40.1 40.2 31.9 25.3 26.2 34.0 42.4 41.5 31.3

20.9 31.5 41.2 41.5 33.6 27.1 27.9 35.6 43.8 43.1 33.3

13.6 20.3 30.8 40.1 40.4 33.1 27.1 27.8 35.1 42.8 42.3 33.0

13.0 19.4 29.9 39.5

10.8 16.9 27.2 37.1 37.2 27.5 17.0 10.8

11.7 18.0 28.4 38.1 38.3 28.8 18.3 11.8

11.7 17.9 27.9 37.1 37.3 28.3 18.2 11.8

11.0 16.9 27.0 36.7 37.0 27.5 17.3 11.2

9.7 14.5 22.6 30.7 31.0 23.2 14.9 9.9

8.0 11.2 15.5 22.0 22.1 15.7 11.5 8.2

10.1 15.3 24.0 33.1 34.3 26.7 17.8

11.6 17.4 27.7 38.4 40.1 31.2 21.0

12.1 17.9 27.6 37.4 38.9 31.1 21.5

11.8 17.5 27.3 37.3 38.8 30.6 21.0

10.9 16.1 25.1 34.5 36.1 28.4 19.4

20.0 25.9 27.0 22.3 15.9

14.8 17.9 18.1

32.0 40.6 39.5 29.6

33.6 42.0 41.0 31.5

33.0 41.0 40.0 31.1

31.8 40.3 39.5 30.3

26.7 33.3 32.9 26.1

19.5 23.2 22.4

27.9 38.2 41.2 33.5

29.4 39.6 42.6 35.3

29.1 38.7 41.5 34.6

27.9 37.9 40.9 33.6

23.6 31.5 33.9 28.5

17.7 22.2 23.3 21.0

24.0 34.9 41.7 37.2

25.6 36.3 43.0 38.9

25.4 35.7 42.0 38.1

24.2 34.7 41.4 37.4

20.7 29.0 34.2 31.4

15.9 20.8 23.4 20.9

32.2 40.7 39.5 29.5

33.8 42.1 40.9 31.4

33.3 41.1 39.9 30.9

32.4 40.5 39.2 29.7

27.6 33.6 32.6 25.3

23.0 22.9 18.8

25.3 34.1 36.7 29.8

29.2 39.7 42.8 35.1

29.4 39.0 41.8 34.8

28.9 38.8 41.6 34.3

26.4 35.6 38.3 31.6

21.1 27.0 28.6 24.2

18.0 19.5 17.1

7.9 9.4 10.7 11.3 11.3 11.4 11.9 12.5 12.7 12.4 12.3 12.6 12.9 12.8 12.4 12.2 12.5 12.9 12.9 12.1 8.0 8.3 11.5 12.0 12.5 12.6 12.1 11.9 11.9 11.8 11.2 8.2 10.0 9.8 8.7

10.3 13.1 15.7 16.4 15.5 15.1 16.1 17.6 17.8 16.6 16.0 16.8 18.1 18.0 16.6 15.9 16.7 18.0 18.1 16.8 16.5 18.0 19.4 19.0 16.7 15.6 16.4 17.7 17.6 16.3 15.5 16.0 17.0 16.4 14.5 12.9 12.7 13.8 15.2 14.8 12.5

13.5 18.8 24.3 25.0 21.8 20.2 22.7 26.5 26.4 22.9 21.2 23.4 26.7 26.7 22.9 21.0 23.3 27.0 26.7 23.4 21.7 24.2 27.4 27.2 23.1 20.9 23.2 26.8 26.3 22.7 20.8 22.8 25.6 24.9 19.9 16.3 16.3 19.5 23.6 23.1 18.2

15.9 23.8 32.1 32.8 27.1 24.6 28.4 34.6 34.0 28.0 25.5 28.8 34.9 34.6 28.2 25.5 29.0 35.2 34.6 28.6 26.0 29.4 35.5 35.1 28.4 25.4 29.0 35.1 34.4 28.0 25.2 28.4 33.9 32.7 24.7 19.1 19.0 24.4 31.0 30.2 22.6

14.6 24.6 32.7 33.2 28.0 25.6 29.3 34.9 34.2 28.1 26.5 29.0 35.1 34.7 29.2 26.4 30.1 35.5 34.7 28.6 27.0 29.4 35.5 34.9 29.4 26.3 29.9 35.4 34.4 28.0 26.2 28.3 33.9 32.7 25.4 20.0 19.4 24.1 30.0 29.1 21.9

0.6 22.9 27.9 28.5 25.6 24.4 26.8 30.1 29.1 24.8 19.2 25.6 29.9 30.2 26.9 25.4 27.6 30.4 29.3 25.2 19.4 25.7 29.8 29.9 26.7 25.2 27.1 29.9 28.7 24.7 19.0 24.6 28.0 27.7 23.5 20.1 17.5 19.6 22.4 21.2 16.7

14.2 16.6 17.3 16.4 16.0 17.1 18.4 17.3 13.6 14.3 17.8 18.7 17.0 15.7 8.5 6.1 22.2 26.0 26.7 25.0 24.1 25.9 28.3 27.3 21.8 22.9 28.0 28.6 26.2 25.0 26.5 28.8 27.6 22.3 23.2 27.9 28.2 25.9 24.7 26.1 28.2 27.0 21.9 0.1 21.3 26.2 26.2 23.1 20.7 20.5 13.0 14.1 13.5 21.4 20.0

14.1 19.5 24.7 25.5 22.3 20.9 23.5 27.2 27.2 23.9 22.7 24.5 27.7 27.5 23.4 21.5 24.4 29.0 27.5 21.2 7.0 18.7 26.0 27.1 23.8 21.9 24.4 28.6 28.4 24.4 22.4 25.0 29.1 28.9 24.7 22.5 24.8 28.1 26.1 17.9 5.9 25.3 31.2 31.9 28.1 26.1 28.5 32.2 31.6 27.5 24.6 28.1 32.3 32.4 28.6 26.7 28.9 32.7 32.0 27.7 25.3 28.2 32.1 32.3 28.4 26.5 28.6 32.3 31.3 26.9 23.5 26.8 30.4 29.9 25.3 22.0 22.3 26.4 32.1 34.9 34.6 33.7 30.3

16.4 24.3 32.6 33.2 27.5 25.0 29.1 35.4 35.2 29.1 26.3 30.0 36.1 35.5 29.0 26.1 30.3 37.0 36.4 29.7 27.0 30.1 35.8 35.3 28.9 25.6 29.0 35.5 35.5 29.1 26.2 30.1 36.5 36.2 29.7 26.8 30.6 36.9 36.3 30.1 27.4 32.6 38.8 38.1 31.7 28.6 32.4 38.4 37.9 31.2 29.4 32.1 38.6 38.1 31.9 28.9 32.4 38.5 38.0 31.5 29.6 32.3 38.7 38.2 31.7 28.5 32.2 38.2 37.5 30.6 28.5 30.7 36.6 35.2 27.2 21.3 19.9 30.9 40.8 43.8 42.5 43.1 39.0

16.8 24.7 32.7 33.3 28.0 25.8 29.6 35.7 35.3 29.5 27.0 30.6 36.3 35.6 29.5 26.9 30.6 36.4 35.7 29.4 26.1 30.0 35.6 34.6 28.6 24.2 28.1 34.2 33.9 28.6 26.1 30.0 36.1 35.7 29.9 27.3 30.9 36.7 36.2 30.5 28.5 32.1 37.9 37.2 31.2 28.4 32.0 37.7 37.1 31.7 29.0 32.4 37.8 37.3 31.4 28.5 32.2 37.8 37.3 31.6 29.2 32.6 37.9 37.2 31.2 28.2 31.8 37.4 36.5 30.5 27.7 30.5 35.2 33.3 25.1 16.4 12.3 30.6 39.6 42.8 42.5 43.2 39.0

17.2 21.9 27.0 27.7 25.1 24.0 26.4 30.0 29.8 26.6 25.2 27.3 30.6 30.2 26.6 25.0 27.2 30.4 29.6 25.6 20.6 26.0 29.8 29.2 25.0 20.2 22.5 25.8 25.4 22.9 23.2 26.0 30.0 29.9 26.8 25.4 27.7 31.1 30.8 27.5 26.4 28.5 31.9 31.5 27.9 26.4 28.5 31.9 31.7 28.5 26.8 29.0 32.2 31.7 28.1 26.5 28.5 31.8 31.6 28.5 26.9 29.0 31.9 31.3 27.6 26.0 28.0 31.1 30.7 27.3 25.3 26.9 28.8 26.8 20.8 15.2 11.8 27.0 33.4 36.4 36.7 36.6 33.1

16.9 20.7 24.6 25.5 23.9 23.3 25.1 27.5 27.7 25.5 24.5 26.0 28.2 27.8 25.4 24.2 25.7 27.6 26.7 20.9 10.5 19.9 25.6 25.6 22.0 15.5 16.2 17.3 16.5 13.7 17.9 23.3 26.9 27.4 25.4 24.5 26.2 28.7 28.5 26.2 25.4 27.0 29.3 28.9 26.5 25.4 26.9 29.2 29.3 27.0 25.8 27.4 29.6 29.1 26.7 25.5 27.0 29.4 29.2 27.0 25.8 27.3 29.2 28.7 26.2 25.1 26.4 28.5 28.4 25.7 24.1 24.9 26.1 24.2 19.4 14.7 11.6 25.3 30.6 33.4 34.2 33.8 30.6

16.6 23.0 28.9 29.8 26.5 25.0 27.9 31.9 31.8 28.1 26.3 28.8 32.4 32.1 27.9 25.8 27.9 31.2 29.4 23.7 14.7 21.8 28.0 28.5 24.8 21.0 22.1 25.7 24.7 19.0 17.5 24.1 30.5 31.2 27.6 26.0 28.7 32.8 32.5 28.6 27.1 29.5 33.1 32.9 28.9 26.9 29.4 33.3 33.0 29.2 27.4 29.9 33.5 33.2 29.2 27.1 29.5 33.4 33.2 29.1 27.5 30.0 33.3 33.0 28.7 26.8 29.1 32.6 32.1 28.1 25.8 27.5 30.0 28.2 21.6 15.5 11.9 27.9 35.0 38.1 38.3 38.4 34.9

18.0 26.2 34.7 35.6 29.8 27.2 31.3 37.8 37.3 31.5 28.5 32.3 38.2 37.7 31.0 27.8 31.2 36.7 35.1 26.7 17.1 24.5 33.7 34.1 27.8 24.9 27.3 32.9 31.8 23.7 18.6 26.5 35.3 36.3 30.4 27.7 31.8 38.3 37.8 31.4 28.3 32.9 38.5 38.1 31.7 28.8 32.5 38.8 38.0 32.3 29.4 33.2 38.8 38.5 32.0 29.0 32.9 39.1 38.4 32.0 29.7 33.5 39.2 38.6 32.0 28.8 32.5 38.6 37.6 31.3 28.0 30.9 35.6 33.5 24.3 16.4 12.1 30.7 40.2 43.7 43.3 44.2 39.9

16.3 25.8 33.9 34.6 29.2 26.7 30.5 36.5 35.9 29.8 28.2 30.8 36.9 36.3 30.2 27.4 30.5 35.6 33.9 25.9 16.3 23.6 33.4 32.9 27.3 23.0 26.8 32.3 30.8 23.0 18.2 25.8 33.9 34.7 29.5 27.4 31.0 36.9 36.2 30.3 27.4 31.4 37.3 36.7 30.9 28.1 31.6 37.5 36.5 30.4 29.0 31.8 37.7 37.1 31.3 28.6 32.3 38.0 36.9 30.9 27.9 32.0 37.8 37.4 31.4 28.4 31.9 37.6 36.5 29.7 27.4 29.2 34.3 32.2 23.5 16.0 12.0 28.2 37.5 40.5 40.5 41.0 36.8

23.0 27.8 28.5 25.7 24.5 27.0 29.8 29.2 25.5 20.8 26.3 30.1 29.9 26.9 25.0 26.7 29.1 27.7 22.2 13.0 18.0 23.2 27.8 23.4 18.7 20.8 23.9 22.9 17.5 13.7 22.6 27.9 28.6 26.4 25.0 27.5 30.5 29.8 26.0 21.5 23.6 30.8 30.6 27.2 26.1 28.4 31.1 30.5 26.2 21.8 27.7 31.4 31.3 28.5 26.9 29.2 31.9 31.1 26.9 21.7 27.6 31.3 31.3 28.0 26.6 28.8 31.3 30.5 26.1 20.3 25.0 28.2 26.9 22.1 17.2 17.4 23.7 28.5 30.5 31.6 29.6 26.7

21.3 25.1 25.9 23.9 22.9 24.8 27.6 26.5 20.1 21.1 27.2 27.8 25.0 23.6 25.1 27.2 26.3 20.9 24.5 21.1 14.2 15.3 17.0 16.6 12.1 21.2 26.7 27.1 24.7 23.6 25.5 28.2 27.0 20.3 27.4 28.3 25.9 24.6 26.4 29.0 28.0 21.3 22.8 29.1 29.8 27.2 26.0 27.7 30.3 29.1 22.5 28.8 29.6 27.2 25.8 27.4 29.7 28.6 22.2 20.4 26.0 25.4 21.3 17.9 16.7 18.1 18.2 15.4 15.0 17.4

11.9 21.8 28.2 29.0 25.0 23.2 25.8 30.4 29.5 24.5 21.0 25.3 30.3 30.5 25.9 23.9 26.4 30.6 29.8 24.5 19.2 21.5 25.4 28.4 23.2 19.7 21.2 24.9 24.6 20.5 20.2 25.3 30.3 30.4 25.9 23.9 26.4 30.7 29.8 24.6 20.8 25.6 30.7 30.8 26.6 24.6 27.2 31.6 30.9 26.1 22.9 27.6 33.0 33.4 29.1 27.1 29.6 34.2 33.2 27.9 24.2 28.8 33.5 33.5 29.1 27.1 29.4 33.8 32.5 27.0 22.5 25.9 30.1 29.0 22.7 17.3 13.7

14.6 21.8 29.8 30.5 25.0 22.6 26.0 31.9 31.6 25.4 23.7 26.1 32.4 32.0 25.9 23.3 26.6 32.4 31.5 25.2 21.4 23.6 31.0 30.3 24.0 20.9 23.7 29.3 28.7 22.9 21.9 25.8 32.1 31.9 26.1 23.4 26.6 32.3 31.8 25.5 22.5 26.4 32.5 32.3 26.3 23.9 27.4 33.4 33.1 27.3 26.4 29.9 37.1 37.1 31.0 28.4 31.8 38.1 37.6 31.0 27.7 31.7 38.1 37.8 31.3 28.4 31.7 37.8 36.8 29.6 26.8 28.2 33.4 31.9 23.4 16.2 9.9

12.7 18.0 23.5 24.1 20.9 19.4 21.8 25.7 25.4 22.0 20.6 22.5 25.9 25.7 21.9 20.0 22.3 25.8 25.3 21.2 19.1 20.4 25.0 24.7 20.6 18.5 20.5 23.8 23.6 20.4 19.2 21.8 25.7 25.6 21.9 20.1 22.3 26.0 25.5 21.7 20.3 22.7 26.1 25.8 22.3 20.4 22.6 27.2 27.2 24.6 24.7 29.2 34.9 35.3 30.5 28.0 31.2 36.5 36.0 30.8 28.5 31.7 36.4 36.1 30.9 28.1 31.2 36.1 35.3 29.7 26.2 26.7 29.3 27.8 21.9

21.5 27.8 34.5 34.8 29.6 27.2 30.6 36.1 35.7 30.2 28.0 31.2 36.2 35.7 30.1 27.4 30.5 35.6 35.5 29.4 25.3 25.3 26.6 25.1 20.7

16.5 25.3 32.9 33.3 27.7 25.2 28.7 34.8 34.5 28.7 26.2 29.3 35.1 34.4 28.2 25.3 28.5 34.4 34.2 27.6 25.1 26.6 30.0 28.5 22.2

14.2 19.0 24.7 25.1 22.3 21.0 22.9 26.3 26.3 23.7 22.8 23.8 26.6 26.2 22.8 21.1 22.9 26.1 25.7 22.4 19.9 28.2 34.4 32.6 24.3

13.8 15.7 16.4 13.2 16.5 16.0 13.6 16.1 16.5 12.6 16.7 16.3 23.1 30.2 29.1 22.1

17.0 20.7 20.3 16.0

10.7 12.3 12.2 10.7

6.9 7.8 7.8

3.4 3.1 10.9 11.3 11.3 11.6 12.0 12.3 10.8 8.8 9.4 10.7 11.4 11.2 11.0 11.0 10.7 9.8 8.5 1.1

17.6 20.5 21.5 21.5 20.5 17.8 13.2 6.7 7.2 15.8 16.0 15.2 15.4 16.6 17.4 16.6 13.9 14.1 16.9 16.2 14.9 14.5 15.2 15.2 13.5 11.1 2.3

18.2 25.2 30.7 31.6 31.7 30.7 25.5 18.9 14.8 14.6 17.5 22.5 25.1 23.5 20.6 20.8 24.2 26.3 24.3 21.3 21.9 24.5 26.2 23.7 20.2 19.9 22.5 23.7 20.1 14.4 10.2 7.4

21.2 31.9 40.0 40.2 40.2 39.5 31.8 22.5 17.4 16.0 20.5 28.9 33.8 30.7 25.5 25.8 31.6 35.4 31.7 26.2 26.4 31.8 35.1 31.0 25.1 24.7 29.7 32.2 26.6 17.6 11.6 8.6

34.4 41.2 41.5 41.3 39.6 31.9 22.0 10.0 16.2 21.6 30.0 35.3 32.0 26.9 27.3 33.2 36.9 33.0 27.6 27.7 33.2 36.6 32.4 26.5 26.1 31.1 33.4 27.6 18.4 12.3 9.3

36.0 42.6 41.3 41.1 39.2 31.8 22.8 10.4 13.4 19.0 25.8 29.9 28.1 25.2 25.5 29.3 31.5 29.2 25.9 26.1 29.4 31.3 28.6 24.8 24.4 27.1 28.0 23.7 17.2 12.2 9.6

37.2 44.3 40.4 40.2 38.9 31.3 21.8 10.9 14.8 19.9 24.2 26.8 26.0 24.1 24.6 27.1 28.5 27.1 25.0 25.2 27.3 28.4 26.5 23.9 23.4 24.9 25.0 21.7 16.5 12.2 9.7

21.8 34.1 41.0 32.8 32.8 31.5 25.6 18.4 11.4 19.5 22.7 27.9 31.2 29.2 26.2 26.5 30.2 32.5 30.1 26.8 27.1 30.5 32.4 29.6 25.8 25.3 28.0 29.0 24.6 17.9 12.8 10.0

24.2 33.2 35.8 25.2 21.8 22.1 26.0 29.1 26.6 23.8 26.8 33.6 37.7 34.4 29.1 29.5 35.3 38.9 35.0 29.1 29.9 35.3 38.5 34.4 28.4 28.2 33.0 35.4 29.3 20.0 13.5 10.0

23.0 31.7 37.4 30.2 25.4 25.9 31.7 35.6 31.4 26.1 27.2 33.9 38.1 34.5 29.4 29.9 35.6 39.0 34.7 28.8 29.1 34.8 38.3 34.2 28.6 28.4 33.3 35.6 29.5 20.1 13.4 9.0

17.0 28.2 32.7 28.8 25.5 26.0 30.5 33.3 29.7 24.7 21.8 29.3 32.0 30.5 27.5 27.8 31.3 33.5 30.1 25.7 22.8 29.6 32.0 30.0 26.5 26.2 29.0 29.9 25.6 18.9 10.5 7.5

4.8 26.0 28.9 27.0 25.1 25.6 28.6 30.3 27.9 21.3 25.2 28.9 28.2 26.4 26.6 28.9 30.2 27.9 21.9 24.5 28.7 27.9 25.3 24.9 26.5 26.8 23.8 19.4

17.9 27.8 31.8 29.7 26.8 27.3 31.0 33.4 29.9 25.9 25.7 30.8 33.1 31.0 27.8 28.1 31.4 33.6 30.1 26.0 24.9 30.2 32.4 30.1 26.7 26.5 29.4 30.7 26.9 21.1

23.3 32.3 37.7 34.3 29.2 29.7 35.6 39.3 35.3 29.4 30.9 36.7 39.8 36.1 30.4 30.5 36.0 39.4 35.5 29.4 30.8 35.7 39.1 35.1 29.3 29.1 34.2 36.9 31.5 23.2

23.7 32.2 37.4 34.2 29.3 29.7 35.6 39.3 35.5 30.2 30.9 36.7 40.2 35.9 30.4 30.6 36.1 39.6 35.6 30.2 30.8 36.3 39.4 35.2 29.4 29.2 34.3 37.0 31.5 23.3

21.6 27.6 31.3 29.6 26.8 27.2 31.1 33.2 31.0 28.1 28.4 32.0 34.1 31.5 28.0 28.1 31.5 33.5 31.0 28.0 28.3 31.6 33.6 30.7 27.0 26.7 29.7 30.8 27.0 21.3

19.8 25.2 27.9 27.3 25.6 25.9 28.4 29.9 28.5 26.7 27.0 29.3 30.6 29.1 26.7 26.6 28.8 30.1 28.6 26.7 26.9 28.9 30.1 28.3 25.7 25.3 27.0 27.4 24.6 20.1

22.7 28.4 31.8 30.1 27.2 27.5 31.2 33.6 31.4 28.2 28.6 32.1 34.3 31.8 28.3 28.2 31.6 33.8 31.5 28.1 28.4 31.7 33.7 31.0 27.3 26.9 29.7 31.1 27.3 21.5

24.7 33.2 38.0 34.9 29.7 30.1 35.9 39.6 35.9 30.2 31.2 36.7 40.1 36.4 30.6 30.8 36.3 39.9 36.0 30.2 30.9 36.2 39.4 35.5 29.6 29.4 34.5 37.3 31.8 23.5

24.7 33.2 38.0 34.8 29.7 30.2 35.9 39.4 35.2 29.6 30.1 35.9 39.8 36.0 30.6 30.9 36.4 39.8 35.5 29.6 29.9 35.6 39.2 35.1 29.5 29.4 34.6 37.2 31.7 23.4

19.1 28.6 31.8 30.2 27.3 27.7 31.4 33.7 30.4 26.2 23.8 30.8 33.2 31.5 28.4 28.5 31.9 34.0 30.7 26.3 23.7 30.3 32.6 30.7 27.3 27.0 29.9 31.1 27.2 21.4

26.0 28.3 27.5 25.8 26.2 28.7 30.1 27.9 21.6 0.3 25.6 29.8 29.2 27.0 27.1 29.3 30.6 28.3 22.2 0.3 24.8 29.1 28.3 25.9 25.5 27.1 27.6 24.7 20.2

28.1 31.6 30.1 27.2 27.5 31.0 33.3 29.9 26.0 25.1 30.8 33.3 31.2 28.1 28.3 31.5 33.7 30.2 26.1 24.9 30.3 32.7 30.4 27.0 26.8 29.7 31.1 27.3 21.4

21.6 32.1 37.4 34.5 29.4 29.8 35.6 39.1 35.2 29.3 30.9 36.1 39.7 36.0 30.3 30.6 36.1 39.5 35.4 29.3 30.7 35.7 39.1 35.2 29.3 29.2 34.3 37.1 31.7 23.3

23.3 31.9 37.1 34.2 29.2 29.7 35.5 39.2 35.2 29.9 30.7 36.4 39.7 35.8 30.3 30.5 36.0 39.5 35.4 30.0 30.5 36.1 39.2 35.1 29.3 29.1 34.2 36.9 31.4 23.1

20.9 27.2 30.8 29.3 26.5 26.9 30.6 32.9 30.6 27.5 27.9 31.4 33.6 31.0 27.6 27.7 31.2 33.2 30.7 27.5 27.8 31.2 33.1 30.4 26.7 26.4 29.4 30.6 26.7 20.8

20.2 24.5 27.1 26.5 24.7 25.1 27.6 29.2 27.9 25.9 26.1 28.4 29.7 28.2 26.0 25.9 28.1 29.5 28.0 25.9 26.0 28.1 29.3 27.6 25.1 24.6 26.3 26.8 23.9 19.3

21.4 26.9 30.3 28.7 25.8 26.2 29.9 32.3 30.2 27.0 27.2 30.7 32.9 30.5 27.0 27.0 30.4 32.6 30.4 26.9 27.0 30.4 32.5 29.9 26.1 25.7 28.6 29.9 26.1 20.1

22.8 30.7 35.7 32.5 27.4 27.9 33.8 37.7 34.1 28.7 28.9 34.5 38.2 34.3 28.6 28.7 34.4 38.1 34.2 28.6 28.7 34.4 37.9 33.7 27.8 27.4 32.5 35.2 29.9 21.5

20.5 29.1 34.2 31.0 26.0 26.5 32.4 36.2 32.6 27.5 27.7 33.1 36.5 32.6 27.1 27.3 33.0 36.6 32.7 27.1 27.4 33.2 36.6 32.4 26.4 26.0 31.1 33.9 28.5 20.3

17.1 22.5 25.6 24.0 21.3 21.7 25.2 27.3 25.4 23.4 23.5 25.8 27.7 25.4 22.3 22.5 25.8 27.7 25.4 22.3 22.8 26.4 28.3 25.6 21.6 21.2 24.1 25.3 21.7 16.5

16.0 17.6 17.3 16.4 16.7 17.8 17.6 15.0 16.0 18.1 18.2 17.4 17.5 18.8 19.4 18.4 16.6 12.9 16.0 17.1 17.2 15.4 12.3

Luminaire Schedule Symbol Qty Label Arrangement Total Lamp Lumens LLF Description

93 2BLT4_30L_ADPT_LP835 SINGLE N.A. 1.000 2BLT4 30L ADPT LP835

25 2BLT2_TUWH_PROR_20L_ADP_@4000 SINGLE N.A. 1.000 2BLT2 TUWH PROR 20L ADP @4000K

Calculation Summary Label CalcType Units Avg Max Min Avg/Min Max/Min G-OFFICE 5-232_Workplane Illuminance Fc 21.32 38.3 8.0 2.67 4.79 G-OFFICE 5-234_Workplane Illuminance Fc 33.08 42.0 19.5 1.70 2.15 G-OFFICE 5-235_Workplane Illuminance Fc 32.23 42.6 17.7 1.82 2.41 G-OFFICE 5-236_Workplane Illuminance Fc 31.53 43.0 15.9 1.98 2.70 G-OFFICE 5-237_Workplane Illuminance Fc 33.08 42.1 18.8 1.76 2.24 G-OFFICE…