SAMPLE Project SOW.pdf

** THIS IS A SAMPLE PROJECT **

SCOPE OF WORK TENANT IMPROVEMENTS

ARMED FORCES RECRUITING CENTER

Maryland Area

LOCATION A: 331 Baltimore Pike, Bel Air, Maryland 21014 LINE ITEM 1 DOORS GENERAL (Common Area): Remove and properly dispose secondary exit door more particularly as shown on Location A Floor Plan.

LINE ITEM 2 DOORS GENERAL (Common Area): Install secondary exit door more particularly as shown on Location A Floor Plan, see Attachment 1 for door description/specifications.

LINE ITEM 3 ELECTRICAL GENERAL (Common Area): Remove and dispose of existing Entry Door Chime/Bell. (Note: this is NOT the AiPhone entry control system.)

LINE ITEM 4 ELECTRICAL GENERAL (Common Area): Install new Entry Door Chime/Bell exterior entrance door and exterior secondary egress door more particularly as shown on Location A Floor Plan. The following entry bell types may be required:

Hard-wired entry alert door chime to all front, and secondary exterior doors. NO WIRELESS and/or BATTERY-OPERATED CHIMES ALLOWED. The system shall be installed to ensure the door chime is operated by the opening of the door and shall have a tone acceptable for an office environment and must be audible in all collocated Military Services’ offices. The COE will approve the proposed tone of the chime before installation. The main entry chime shall have a single-tone ping (e.g. - “ding”) while the secondary exit door chimes shall have a two-tone ping (e.g. - “ding-dong”). If site specific conditions require a non-electrical door chime, a fully mechanical system (no electrical wiring) is allowed, as long as each Military Service can hear them in their offices. Alternate mechanical / magnetic entry bell chime to be: EZ-Tone, model # ADC-01. Color to closely match existing door frame when possible. Confirm with COE representative on use and color.

LOCATION B: 1236 National Highway, Suite 3, LaVale, Maryland 21502 LINE ITEM 5 SPECIALTY ITEMS (Air Force Suite): Remove and reinstall wall hangings and furniture.

LINE ITEM 6 WALLS GENERAL (Air Force Suite): Clean, sand and repair all walls to smooth and professional finish to prepare them for application of new paint in the Air Force suite location more particularly shown on Location B Floor Plan.

LINE ITEM 7 WALLS GENERAL (Air Force Suite): Paint all interior office area(s) as more particularly shown on Location B floor plan. All exposed interior walls shall be finished and painted with one coat primer tinted to match the applicable wall color when appropriate along with two coats of latex paint.

AIR FORCE PAINT SCHEDULE

Mfr: Color Name: Color #: Product: Coats: Finish: Area:

Sherwin Williams PRIMER ProMar 200

White (see Note 1) B28W02600 2 Latex: Acrylic Primer All Walls / All Painted Trim

Sherwin Williams

United States Air Force Recruiting White

SW6259

Spatial White B20W12651 2 Latex: Eg-Shel Walls

Sherwin Williams

United States Air Force Recruiting Gray

SW9162

African Gray B20W12651 2 Latex: Eg-Shel Walls

(below chair rail) Sherwin Williams

United States Air Force Recruiting Gray

SW9162

African Gray B31W2651 2 Latex: Semi-Gloss Trim &

Chair Rail

Note 1: ProMar 200 Primer to be tinted to match the applicable wall color for all walls, and all painted trim.

Note 2: Paint schemes and wall finishes to be applied as referenced on the approved floor plan / AE drawing / finish schedule. No Accent Wall Note 3: Walls for all spaces EXCEPT Storage and Restrooms:

United States Air Force Recruiting White above chair rail and United States Air Force Recruiting Gray for the chair rail and below chair rail.

Note 4: Storage Room Walls: to be United States Air Force Recruiting White Note 5: Contractor is responsible for moving any furniture, displays, and wall hangings as necessary to complete the work Note 6: All unused paint MUST be removed from property Note 7: If selected, contractor should request Sherwin Williams’ colors as “United States Air Force Recruiting...”

Formulas to these color names are available on Sherwin Williams’ National Accounts Database.

LINE ITEM 8 FLOORING GENERAL (Air Force Suite): Remove and dispose of existing carpet and base cove in the Air Force suite including the testing room as shown on the Location B Floor Plan.

LINE ITEM 9 FLOORING GENERAL (Air Force Suite): Install new carpet tiles and base cove throughout the Air Force Suite including testing room as shown on Location B Floor Plan. All carpet must be installed smoothly and evenly in accordance with manufacturer’s instructions and with the approved low Volatile Organic Compounds (VOC’s) release adhesive. One (1) extra box of carpet tiles shall be left in Air Force’s storage room for future use. All be carpet and base cove shall be in accordance with carpet schedule below:

AIR FORCE CARPET SCHEDULE

Manufacturer / Style: Shaw / U. S. AF Recruiting Standard: #800C6 Color (Name, Number): Ink, #49410 Product: Carpet Tile Installation Method: Monolithic (See Note #1) Installation Adhesive: "LokDots" Adhesive System Base Cove If existing is greater than 4” new should match existing height.

Note 1: Carpet tile installation to be installed monolithic with all arrows pointing in the left-direction upon walking into the entrance of the space.

Note 2: If selected, for expedited delivery - government pricing contact: Shaw Contract for ALL inquiries go to website: www.shawcontract.com/usrecruiting. For pricing and order inquiries go to the pricing & ordering tab at the above website, or call: 1-800-356-7429 ext. 1 or email: cs.gsa@shawinc.com. For general inquiries call Michele Leise, 402-968-6025, email: michele.leise@shawcontract.com mailto:cs.gsa@shawinc.com mailto:michele.leise@shawcontract.com

LINE ITEM 10 SPECIALTY ITEMS (Air Force Suite): Contractor shall disassemble and reassemble ballistic panel workstations as required for replacing carpet tiles and repainting walls. Each panel weighs approximately 100-125 lbs. See sample pictures below:

(Example) (Example)

LINE ITEM 11 DOORS GENERAL (Common Area): Remove and properly dispose secondary exit door, location as more particularly shown Location B Floor Plan.

LINE ITEM 12 DOORS GENERAL (Common Area): Install secondary egress/exit door, location as shown on floor plan for Location B Floor Plan, see Attachment 1 for detailed specifications

LINE ITEM 13 ELECTRICAL GENERAL (Common): Repair the existing Video Intercom Entry Control system to ensure the system functions properly, providing clear communication and video between the door station and all desk stations in each military suite.

LOCATION C: 5432 Barnabas Road, Oxon Hill, Maryland 20745 LINE ITEM 14 DOORS GENERAL (Common Area): Remove and properly dispose secondary exit door location more particularly shown on Location C Floor Plan.

LINE ITEM 15 DOORS GENERAL (Common Area): Install secondary exit door, location as shown on floor plan for Location C, see Attachment 1, Secondary Egress Door detailed specifications.

LINE ITEM 16 DOORS GENERAL (Common Area): Remove and properly dispose Main Entrance door hardware as shown on Location C Floor Plan.

LINE ITEM 17 DOORS GENERAL (Common Area): Install new door hardware to main entrance door in accordance with the specification below and as shown on Location C Floor Plan.

LINE ITEM 18 ELECTRICAL AI PHONE SYSTEM (Common Area): Remove and properly dispose existing Video Intercom Entry Control System. Patch, repair, and touch-up paint any damaged wall area after removing system components. Wall should have a clean, smooth, and professional look once all system components have been removed.

LINE ITEM 19 ELECTRICAL AI PHONE SYSTEM (Common Area): Install new Video Intercom Entry Control (EC) System (Aiphone IXG Series) in accordance with Attachment #2 Security Applications.

LINE ITEM 20 ELECTRICAL CCTV (Common Area): Install new Closed Circuit Television System (CCTV) with Network Video Recording (NVR) in accordance with Attachment #2 Security Applications.

LOCATION D: 8245 B Dickerson Lane, Salisbury, Maryland 21804 LINE ITEM 21 SPECIALTY ITEMS (Army Suite): Remove and reinstall wall hangings and furniture.

LINE ITEM 22 WALLS GENERAL (Army Suite): Clean, sand and repair all walls to smooth and professional finish to prepare them for application of new paint in the Army suite more particularly shown on Location D Floor Plan.

LINE ITEM 23 WALLS GENERAL (Army Suite): Paint interior office area(s) including testing and storage rooms. All exposed interior walls shall be finished and painted with one coat primer tinted to match the applicable wall color when appropriate along with two coats of latex paint more particularly shown on Location D Floor Plan.

ARMY PAINT SCHEDULE

Mfr: Color Name: Color #: Product: Coats: Finish: Area:

Sherwin Williams PRIMER ProMar 200

White (see Note 1) B28W02600 1 Latex: Acrylic Primer All Walls / All Painted Trim

Sherwin Williams

United States Army Recruiting Off-White

SW 6148

Wool Skein B20W12651 2 Latex: Egg-Shell Walls

Sherwin Williams

United States Army Recruiting Khaki

SW 6150

Universal Khaki B31W2651 2 Latex: Semi-Gloss Trim

Sherwin Williams

United States Army Recruiting Green

SW 6166

Eclipse B20T2654 2 Latex: Egg-Shell Accent Wall

Note 1: ProMar 200 Primer to be tinted to match the applicable wall color for all walls, and all painted trim.

Note 2: Paint schemes and accent wall finishes to be applied as referenced on floor plan/finish schedule.

Note 3: All window and door frames shall have semi-gloss finish; color to be: United States Army Recruiting Khaki.

Note 4: Accent wall to be: United States Army Recruiting Green

LINE ITEM 24 FLOORS (Army Suite): Remove and dispose of existing carpet and base cove in the Army suite to interior office and testing room more particularly shown on Location D Floor Plan.

LINE ITEM 25 FLOORS (Army Suite): Install new carpet tiles and base cove throughout the Army suite excluding storage All carpet must be installed smoothly and evenly in accordance with manufacturer’s instructions and with the approved low Volatile Organic Compounds (VOC’s) release adhesive. One (1) extra box of carpet tiles shall be left in Army’s storage room for future use. All be Carpet and Base cove shall be in accordance with carpet schedule below:

ARMY CARPET SCHEDULE

Manufacturer/Style: Shaw / U.S. Army Recruiting Standard: # 802E5 Color (Name, Number): Duty, BB90D Product: Carpet Tile Installation Method: Quarter Turn Installation Adhesive: "LokDots" Adhesive System Base Cove (see note 2 below) Johnsonite/Tarkett (https://distributor.tarkett.com), Rubber; Color:

#40, Black, to match existing height.

Note 1: If selected, for expedited delivery - government pricing contact: Shaw Contract for ALL inquiries go to website: http://www.shawcontractgroup.com/usrecruiting. For pricing and order inquiries go to the pricing & ordering tab at the above website, or call: 1-800-356-7429 ext. 1 or email: cs.gsa@shawinc.com. For general inquiries call Michele Leise, 402-968-6025, email:

michele.leise@shawcontract.com Note 2: If existing Base Cove is greater than 4” new base cove shall match existing base cove in height.

LINE ITEM 26 SPECIALTY ITEM (Army Suite): Contractor shall disassemble and reassemble ballistic panel workstations as required for replacing carpet tiles and

Note 5: Contractor is responsible for moving any furniture, displays, and wall hangings as necessary to complete the work.

Note 6: All unused paint MUST be removed from property.

Note 7: If selected, contractor should request Sherwin Williams’ colors as “United States Army Recruiting...”

Formulas to these colors are available on Sherwin Williams’ National Accounts Database.

https://distributor.tarkett.com/

LINE ITEM 27 ELECTRICAL (Army Suite): Repair the existing Video Intercom Entry Control system to ensure the system functions properly from all desk stations and provides clear communication and video between the door station and desk stations.

LOCATION E: 921 C Ellsworth Drive, Silver Springs, Maryland 20910 LINE ITEM 28 PLIMBING (Common Area): Replace sink faucet in women’s restroom using commercial grade parts, finish to be stainless steel (SS) more particularly shown on Location E Floor Plan.

2840DH 2840DH 2840DH 3068 3068

2840DH

2840DH

26682668

D H

D H

D H

2668 2668

2840DH

2840DH

AIR FORCE

MARINES

NAVY

TESTING

TESTING

TESTING STORAGE

STORAGE

STORAGE

SNOIC

Security

Janitor's w fRestroom Restroom

DLCPO Office

Replace secondary exit door & Install Entry Door

Chime

Install Entry Door Chime

LOCATION A: 331 Baltimore Pike, Bel Air, Maryland 21014

30683068

2668 2668

TESTING

STORAGE

RESTROOM

RESTROOM

ARMY

NAVY

TESTING

STORAGE

STORAGE

TESTING

MARINES

AIR FORCE

TESTING

STORAGE

LOCATION C: 1236 National Highway, Suite 3, LaVale, Maryland 21502

RECEPTION AREA / DISPLAY AREA

Closet Closet

NCOIC

Paint & Carpet

Paint Only

Paint & Carpet

Repair Video Intercom Entrance Control System for all 4 military suites

Remove and install secondary egress door

D H

D H

Kitchen

Bathroom

Commander's Office

TESTING

STORAGE

OPEN AREA

LOCATION C: 5432 Barnabas Road, Oxon Hill, Maryland 20745

Replace secondary exit door and hardware

Replace Door Hardware for Primary Entrance

Door

Remove existing Video Intercom Entry Control (EC) System and Install new Video Intercom Entry Control (Aiphone IXG Series) System and Closed

Circuit Television (CCTV) System

SNOIC

Equip. Rm.

Office

Testing

Testing

Testing

Testing

Storage

Storage

Storage

Storage

Stration Cmdr

ARMY NAVY

AIR FORE Marine Corps

G re en A cc en t W al l

Janitorial Restroom

Restroom

Paint & Carpet

Paint & Carpet

Paint Only

Paint Only

Paint & Carpet

Repair Video Intercom Entry Control System

LOCATION D: 8245 B Dickerson Lane, Salisbury, Maryland 21804 Replace secondary exit door

FX

FX

0F X

FX

3068306830688050FX8050FX

2668 2668

4028FX

26682668

D F

NAVY

(VA182011) Marines ARMY

NAVY

ZONE SUP

(VA182901)

Storage

Storage

Storage

Testing

Testing

Testing

Station Commander's Office

Janitorial

Women's Restroom

Men's Restroom

LOCATION E: 921 C Ellsworth Drive, Silver Springs, Maryland 20910

Replace Sink

** THIS IS A SAMPLE PROJECT **

SCOPE OF WORK TENANT IMPROVEMENTS

ARMED FORCES RECRUITING CENTER

Delaware and Pennsylvania Areas

LOCATION A: 1300 N. Dupont Highway, Dover, Delaware 19901 LINE ITEM 1 SPECIALTY ITEMS (Army Suite): Remove and reinstall wall hangings and furniture.

LINE ITEM 2 WALLS GENERAL (Army Suite Walls): Clean and sand all walls to smooth and professional finish to prepare them for application of new paint in the Army suite to include closet, and stations commanders’ office location more particularly shown on Location A Floor Plan.

LINE ITEM 3 WALLS GENERAL (Army Suite Walls): Paint interior office area(s) to include closet, and stations commanders’ office. All exposed interior walls shall be finished and painted with one coat primer tinted to match the applicable wall color when appropriate along with two coats of latex paint location more particularly shown on Location A Floor Plan.

ARMY PAINT SCHEDULE

Mfr: Color Name: Color #: Product: Coats: Finish: Area:

Sherwin Williams PRIMER ProMar 200

White (see Note 1) B28W02600 1 Latex: Acrylic Primer All Walls / All Painted Trim

Sherwin Williams

United States Army Recruiting Off-White

SW 6148

Wool Skein B20W12651 2 Latex: Egg-Shell Walls

Sherwin Williams

United States Army Recruiting Khaki

SW 6150

Universal Khaki B31W2651 2 Latex: Semi-Gloss Trim

Sherwin Williams

United States Army Recruiting Green

SW 6166

Eclipse B20T2654 2 Latex: Egg-Shell Accent Wall

Note 1: ProMar 200 Primer to be tinted to match the applicable wall color for all walls, and all painted trim.

Note 2: Paint schemes and accent wall finishes to be applied as referenced on floor plan/finish schedule.

Note 3: All window and door frames shall have semi-gloss finish; color to be:

United States Army Recruiting Khaki.

Note 4: Accent wall to be: United States Army Recruiting Green Note 5: Contractor is responsible for moving any furniture, displays, and wall hangings as necessary to complete the work Note 6: All unused paint MUST be removed from property.

Note 7: If selected, contractor should request Sherwin Williams’ colors as “United States Army Recruiting...”

Formulas to these colors are available on Sherwin Williams’ National Accounts Database.

LINE ITEM 4 FLOORS GENERAL (Army Suite Floors): Remove and dispose of existing carpet and base cove in the Army’s suite as more particularly shown on Location A Floor Plan.

LINE ITEM 5 FLOORS GENERAL (Army Suite Floors): Install new Carpet Tiles and Base Cove throughout the Army suite to include testing room. All carpet must be installed smoothly and evenly in accordance with manufacturer’s instructions and with the approved low Volatile Organic Compounds (VOC’s) release adhesive. Location as shown on floorplan for Location A. One (1) extra box of carpet tiles shall be left in Army’s storage room for future use. All be Carpet and Base cove shall be in accordance with carpet schedule below:

ARMY CARPET SCHEDULE

Manufacturer/Style: Shaw / U.S. Army Recruiting Standard: # 802E5 Color (Name, Number): Duty, BB90D Product: Carpet Tile Installation Method: Quarter Turn Installation Adhesive: "LokDots" Adhesive System

Note 1: If selected, for expedited delivery - government pricing contact: Shaw Contract for ALL inquiries go to website:

http://www.shawcontractgroup.com/usrecruiting. For pricing and order inquiries go to the pricing & ordering tab at the above website, or call: 1-800-356-7429 ext. 1 or email: cs.gsa@shawinc.com. For general inquiries call Michele Leise, 402-968-6025, email: michele.leise@shawcontract.com Note 2: If existing Base Cove is greater than 4” new base cove shall match existing base cove in height.

LINE ITEM 6 SPECIALTY ITEMS (Army Suite): Contractor shall disassemble and reassemble ballistic panel workstations as required for replacing carpet tiles and

LINE ITEM 7 ELECTRICAL AI PHONE SYSTEM (Common): Repair the existing Video Intercom Entry Control system to ensure the system functions properly, providing clear communication and video between the door station and all desk stations in each military suite.

LOCATION B: 250 S. Main St., Suite 105 & 106, Newark, Delaware 19711 LINE ITEM 8 ELECTRICAL AI PHONE SYSTEM (Navy Suite): Remove AIPhone wall-mounted desk station. Location as shown on Floorplan for Location B.

LINE ITEM 9 WALLS GENERAL (Navy Suite): Patch and repair drywall where wall-mounted desk-station was removed. Location as shown on Floorplan for Location B.

LINE ITEM 10 WALLS GENERAL (Navy Suite): Paint wall where wall-mounted desk-station was removed, see paint schedule below. Location as shown on Floorplan for Location B.

NAVY PAINT SCHEDULE

Mfr: Color Name: Color #: Color: Coats: Finish: Area:

Sherwin Williams

PRIMER ProMar 200 White (see Note 1)

B28W02600 2 Latex: Acrylic Primer All Walls / All

Painted Trim

Sherwin Williams United States Navy Recruiting White

SW 7757

High Reflective White

B20W2650 2 Latex: Eg-Shel Walls

(above chair rail)

Sherwin Williams United States Navy Recruiting White

SW 7757

High Reflective White

B31W2650 2 Latex: Semi-Gloss Trim

Note 1: ProMar 200 Primer to be tinted to match the applicable wall color for all walls, and all painted trim.

Note 2: Paint schemes and wall finishes to be applied as referenced on the approved floor plan / AE drawing / finish schedule.

Note 3: Walls to be: United States Navy Recruiting White above chair rail.

Note 5: Contractor is responsible for moving any furniture, displays, and wall hangings as necessary to complete the work Note 6: All unused paint MUST be removed from property Note 7: Paint must have a minimum of 14 day to cure prior to application of any graphics Note 8: If selected, contractor should request Sherwin Williams’ colors as “United States Navy Recruiting...”

Formulas to these color names are available on Sherwin Williams’ National Accounts Database.

LINE ITEM 11 ELECTRICAL AI PHONE SYSTEM (Navy Suite): Install one (1) Master Desk-Station and two (2) additional Sub-Master Desk Stations: Mfr; Aiphone, Model # GT-2H (with GT-HS handset add-on), or equivalent. as shown on Location I Floor Plan.

a. Aiphone GT-HS – Phone add on for ALL GT-2C and GT-2H desk station

b. Aiphone MCW-S /Desk Stands.

c. Aiphone GT-BC – GT audio control unit.

d. Aiphone GT-VBC – GT video control unit.

e. Aiphone W-DIN11 – DIN Mounting Rail (2 needed).

NOTE: Aiphone not to be wall mounted.

LINE ITEM 12 DOORS GENERAL (Common Area): Install a stainless-steel anti-pry plate on entrance and secondary egress doors. The anti-pry plate should be stainless-steel with a minimum of: 12 gauge thickness, 10 inches long, and 3.25 inches wide.

Site specific configurations may require a different size/shape of anti-pry plate but must be approved by the COE representative prior to installation. Mounting studs shall be concealed welded on the back side of the security plate thereby leaving no point of attack from the exterior of the safe room. Note: Anti-Pry plate provided must conform to existing door configuration (e.g., offset, door handle, etc.). Location more particularly shown on Location B Floor Plan.

LOCATION C: 43 S. 69th Street, Upper Darby, Pennsylvania 19082 LINE ITEM 13 WALL GENERAL (Army Suite): Remove and reinstall wall hangings and furniture.

LINE ITEM 14 WALLS GENERAL (Army Suite Walls): Clean and sand all walls to smooth and professional finish to prepare them for application of new paint in the Army suite to include station commander’s office and testing room as more particularly shown on Location C Floor Plan.

LINE ITEM 15 WALLS GENERAL (Army Suite Walls): Paint interior office area(s) to include closet, and stations commanders’ office. All exposed interior walls shall be finished and painted with one coat primer tinted to match the applicable wall color when appropriate along with two coats of latex paint. Location as shown on floorplan for Location C.

ARMY PAINT SCHEDULE

Mfr: Color Name: Color #: Product: Coats: Finish: Area:

Sherwin Williams PRIMER ProMar 200

White (see Note 1) B28W02600 1 Latex: Acrylic Primer All Walls / All Painted Trim

Sherwin Williams

United States Army Recruiting Off-White

SW 6148

Wool Skein B20W12651 2 Latex: Egg-Shell Walls

Sherwin Williams

United States Army Recruiting Khaki

SW 6150

Universal Khaki B31W2651 2 Latex: Semi-Gloss Trim

Sherwin Williams

United States Army Recruiting Green

SW 6166

Eclipse B20T2654 2 Latex: Egg-Shell Accent Wall

Note 1: ProMar 200 Primer to be tinted to match the applicable wall color for all walls, and all painted trim.

Note 2: Paint schemes and accent wall finishes to be applied as referenced on floor plan/finish schedule.

Note 3: All window and door frames shall have semi-gloss finish; color to be:

United States Army Recruiting Khaki.

Note 4: Accent wall to be: United States Army Recruiting Green Note 5: Contractor is responsible for moving any furniture, displays, and wall hangings as necessary to complete the work Note 6: All unused paint MUST be removed from property.

Note 7: If selected, contractor should request Sherwin Williams’ colors as “United States Army Recruiting...”

Formulas to these colors are available on Sherwin Williams’ National Accounts Database.

LINE ITEM 16 FLOORS GENERAL (Army Suite Floors): Remove and dispose of existing carpet and base cove in the Army’s suite as more particularly shown on Location C Floor Plan.

LINE ITEM 17 FLOORS GENERAL (Army Suite Floors): Install new Carpet Tiles and Base Cove throughout the Army suite to include testing room. All carpet must be installed smoothly and evenly in accordance with manufacturer’s instructions and with the approved low Volatile Organic Compounds (VOC’s) release adhesive. Location as shown on floorplan for Location C. One (1) extra box of carpet tiles shall be left in Army’s storage room for future use. All be Carpet and Base cove shall be in accordance with carpet schedule below:

ARMY CARPET SCHEDULE

Manufacturer/Style: Shaw / U.S. Army Recruiting Standard: # 802E5 Color (Name, Number): Duty, BB90D Product: Carpet Tile Installation Method: Quarter Turn Installation Adhesive: "LokDots" Adhesive System

Note 1: If selected, for expedited delivery - government pricing contact: Shaw Contract for ALL inquiries go to website:

http://www.shawcontractgroup.com/usrecruiting. For pricing and order inquiries go to the pricing & ordering tab at the above website, or call: 1-800-356-7429 ext. 1 or email: cs.gsa@shawinc.com. For general inquiries call Michele Leise, 402-968-6025, email: michele.leise@shawcontract.com Note 2: If existing Base Cove is greater than 4” new base cove shall match existing base cove in height.

LINE 18 DOORS GENERAL (Common Area Secondary Egress/Exit Door): Remove and properly dispose secondary exit door more particularly as shown on Location C Floor Plan.

LINE ITEM 19 DOORS GENERAL (Common Area Secondary Egress/Exit Door):

Install secondary exit door more particularly as shown on Location C Floor Plan, see Attachment 1 -Secondary Egress/Exit Door for door description/specifications.

LINE ITEM 20 ELECTRICAL GENERAL (Closed Circuit Television System-CCTV- Army/Navy & Marines Suites): Repair camera system is inoperable prohibiting end users from viewing images within their individual suites.

LINE ITEM 21 ELECTRICAL GENERAL (CCTV – Exterior): Install two (2) additional cameras at alley way between the two (2) buildings as identified on Location C Floor Plan.

LOCATION D: 7751-7753 New Falls Road, Levittown, PA 19055 LINTE ITEM 22 DOORS GENERAL (Common Area Secondary Egress/Exit Door):

Remove and properly dispose secondary exit door more particularly as shown on Location D Floor Plan.

LINE ITEM 23 DOORS GENERAL (Common Area Secondary Egress/Exit Door):

Install secondary exit door more particularly as shown on Location D Floor Plan, see Attachment 1 -Secondary Egress/Exit Door for door description/specifications.

LINE ITEM 24 ELECTRICAL (Storefront Door Navy Suite): Remove and dispose of existing Entry Door Chime/Bell. (Note: this is NOT the AiPhone entry control system.)

See Location D Floor Plan for location of door chimes.

LINE ITEM 25 ELECTRICAL (Storefront Door Navy Suite): Install new Entry Door Chime/Bell exterior entrance door and exterior secondary egress door more particularly as shown on Location A Floor Plan. The following entry bell types may be required:

Hard-wired entry alert door chime to all front, and secondary exterior doors. NO WIRELESS and/or BATTERY-OPERATED CHIMES ALLOWED. The system shall be installed to ensure the door chime is operated by the opening of the door and shall have a tone acceptable for an office environment and must be audible in all collocated Military Services’ offices. The COE will approve the proposed tone of the chime before installation. The main entry chime shall have a single-tone ping (e.g. - “ding”) while the secondary exit door chimes shall have a two-tone ping (e.g. - “ding-dong”). If site specific conditions require a non-electrical door chime, a fully mechanical system (no electrical wiring) is allowed, as long as each Military Service can hear them in their offices. Alternate mechanical / magnetic entry bell chime to be: EZ-Tone, model # ADC-01. Color to closely match existing door frame when possible. Confirm with COE representative on use and color.

LOCATION A: 1300 N. DUPONT HIGHWAY, DOVER, DELAWARE 19901

ACCENT WALL

PAINT & CARPET

Paint & Carpet

Repair the existing Video Intercom Entry Control system e1rexajs Polygonal Line e1rexajs Polygonal Line e1recrch Line

Marine Corps Suite

Restroom Restroom

Janitorial

Storage

Testing

Storage

Testing

Navy Suite

NCOIC Office

Display Area

W F

LOCATION B: Rittenhouse Station 250 Main St, Suite 105 &106, Newark, DE

Install Anti-Pry Plate

Install Anti-Pry Plate

Remove existing

AiPhone wall-mounted desk station Install

AiPhone Master Desk

Station

Install AiPhone

Sub-master Desk

Station

Install AiPhone

Sub-master Desk

Station

SC

SC

SC

SC

SC

SC

SC

SC

SC SC

Air Force 408sf

Restroom

Janitorial Security Closet

Restroom

Desktop

CCTV Monitor CCTV Monitor

C C

TV

M on ito r

Army 1375sf

Navy 1208sf

Marine Corps 552sf

D is pl ay

A re a

Testing 80sf

S to ra ge sf

Storage 60sf

Testing 100sf

Storage 100sf

A rm y S ta tio n C om m an de r's O ff ic e

5s f

N av y S ta tio n C om m an de r's O ff ic e

5s f

Rear Exit

Testing 50sfStorage

60sf

Testing 50sf

CCTV Monitor

N avy Training G raphics

Green Accent Wall

S he lv in g

Shelving

S he lv in g

Shelving

S he lv in g

S he lv in g

C O

M M

O B oa rd

C O

M M

O B oa rd

C O

M M

O B oard

COMMO Board Common Coridor (Chair Rail)

C om m on

C or id or

(C ha ir R ai l)

Common Coridor (Chair Rail)

Se co nd ar y Eg re ss

R ep la ce d oo r, se cu rt y sy st em , a nd ha rd w ar e

Desk with AiPhone Sub- Master Desk Station

Location is approximate

Desk with AiPhone Sub-Master Desk

Station Location is approximate

Desk with AiPhone Sub-Master Desk

Station Location is approximate

D es k w ith A iP ho ne M as te r D es k

S ta tio n

Lo ca tio n is a pp ro xi m at e

D es k w ith A iP ho ne M as te r D es k

S ta tio n

Lo ca tio n is a pp ro xi m at e

Desk with AiPhone Master Desk Station

Location is approximate

Desk with AiPhone Sub-Master Desk

Station Location is approximate

D es k w ith A iP ho ne M as te r D es k

S ta tio n

Lo ca tio n is a pp ro xi m at e

Desk with AiPhone Sub-Master Desk

Station Location is approximate

D es k w ith A iP ho ne S ub -M as te r D es k

S ta tio n

Lo ca tio n is a pp ro xi m at e

Desk with AiPhone Sub-Master Desk

Station Location is approximate

43 S. 69st. Street, Upper Darby, PA

Add Security Camera to cover alley

Add Security Camera to cover alley

CCTV Monitor paint paint paint paint carpet carpet carpet

Location C: Upper Darby, PA e1rexabc Line e1rexabc Line e1rexabc Line e1rexabc Line e1rexabc Line e1rexabc Line e1rexabc Line e1rexabc Line

3068 3068

306830683068

3068 3068

30683068

3068 3068

3000 SQ FT

LIVING AREA

M A

R

IN

E C

O R

PS

A

IR

F O

R C

E

N

AV

Y

SN

O

IC

O ffi ce

St or ag e

Te st in g

Te st in g

St or ag e

St or ag e

Zo ne

S up

O ffi ce

Te st in g

R es tr oo m

R es tr oo m

Janitorial Janitorial

Replace exit door and install keypad

Convert into security closet

Replace door entry/exit chime

SCSCSC

SC

SC

SC SC

Location D: 7751 & 7753 New Falls Rd Levittown, PA e1rexabc Oval e1rexabc Line e1rexabc Line e1rexabc Typewritten Text