Salient Characteristics_ Bldg. 1690 Door Locks.docx
DOCX document 30 KB Posted
- Attached to
- DORMA KABA Locks
- Solicitation number
- FA286026Q0023
About this file
This is a Salient Characteristics Package for a dormitory door lock installation and programming project at Joint Base Andrews, specifying the exact equipment and services required for the procurement. The project involves the installation and programming of approximately 127 Dormakaba RT Plus door locks (Part Numbers 79PS016T1KL30-626 and KR30-626) with Kaba Lock Trim Plates (Part Number 061-510779-630) in satin chrome finish for unaccompanied housing in Building 1690. The locks must feature a Standard ADB Mortise 1-1/4" face plate with deadbolt and Lori Type Cylinder with Long/Long Lever configuration, matching the existing dormitory campus system specifications and durability standards.
The contractor shall remove existing locks and install all 127 new Dormakaba RT Plus locks with required mounting hardware and installation equipment, then program them to operate with the Community software and Ambiance System for key issuance and access point management. The contractor's lock installer must be trained and certified by Dormakaba for the RT Plus Standard Mortise ADB and Lori type cylinder installations, match the existing cylinder code, and verify that all locks are properly installed, programmed, and functioning. If fewer than 127 locks are installed, excess new locks shall be provided to the government. This package supports the Air Force's small business set-aside Request for Quotation (FA286026Q0023) under NAICS code 332510 with a size standard of 750 employees.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Dorma Kaba Locks Questions and Answers.docx | DOCX document | |
| 1690 Floor Plan.pdf | ||
| Additional details to Scope Of Work (Bldg. 1690 Locks).docx | DOCX document | |
| RFQ FA286026Q0023.pdf | ||
| single_source_justification - Dormakaba Locks - JBA Dorms Signed.pdf | ||
| PWS_Bldg. 1690 Door Locks.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SALIENT CHARACTERISTICS PACKAGE
Dormitory Dormakaba Door Locks
Installation Location: Joint Base Andrews Facility Type: Dormitory Estimated Quantity: 127 Rooms Section: Unaccompanied Housing Purpose: Contracting Package for Bldg. 1690 Dormakaba Door Locks Installation and Programming
Salient Characteristics Dormitory Dormakaba Door Locks Project: Installation/Programming for Approximately 127 Dormitory Door Locks Location: Joint Base Andrews
| Attribute |
| Details |
| Physical Characteristics |
| Dormakaba RT Plus (Part Number: 79PS016T1KL30-626 and KR30-626) door lock with (Part Number: 061-510779-630 Kaba Lock Trim Plate on both sides of the door. The specific lock information listed above is the only lock that will work with our current Dormakaba Dormitory Campus System, so the 127 locks can be programmed to match the same configuration as our other dormitories. |
| Physical Characteristics – Hardware |
| Dormakaba RT Plus Door Locks (Part Number: 79PS016T1KL30-626 and KR30-626) with (Part Number: 061-510779-630 Kaba Lock Trim Plate on both sides of the door. This lockset must have a Standard ADB Mortise 1-1/4” (32 mm) face plate with deadbolt (non-handed) and a Lori Type Cylinder with a Long/Long Lever. |
| Physical Characteristics – Color/Appearance |
| Satin Chrome lock with (Part Number: 061-510779-630 Kaba Lock Satin Chrome Trim Plate on both sides of the door. |
Essential Characteristics – Durability
The Dormakaba RT Plus door locks must have the same durability as the existing RT Plus locks installed on the dormitory campus.
| Essential Characteristics – Compatibility |
| The Dormakaba RT Plus door locks must have the same configurations as our existing RT Plus door locks. The locks must be programmed to modify Ambiance with lock and key design for new access points, so our office can issue keys using our existing Ambiance System. The contractor’s lock installer shall be trained and certified by Dormakaba for the Dormakaba RT Plus Standard Mortise, ADB and Lori type cylinder. Also, it must match existing cylinder code. |
| Functions to be Performed – Installation |
| Contractor shall remove the existing lock from each door and install 127 Dormakaba RT Plus door locks and trim plates for approximately 127 dormitory rooms. If less than 127 locks are installed, excess new locks shall be provided to the government. |
| Functions to be Performed – Hardware |
| Contractor shall provide all required mounting hardware and installation equipment necessary for complete installation. |
| Functions to be Performed – Operation |
| Contractor shall program 127 Dormakaba RT Plus door locks to correctly operate with the Community software and provide services to add new rooms to kiosk as well. |
| Functions to be Performed – Workmanship |
| Contractor shall verify that all new locks are installed, programmed, and function properly. |
File details come from the government source that posted it. Updated .