Salient characteristics and specificaitons revision v3 (10 Dec 25).pdf

Description of Product, Supplies or Services required to meet the Agency’s needs: Lower body and Isolation equipment for Physical Therapy and Physical Fitness Enhancement

Identification of the Justification Rationale:

1. Two in one Abductor/adductor Machine.

a. Size max: (L x W x H): 70" x 70" x 60"

b. Equipment weight max: 670 lbs (includes weight stack up to min 305lbs)

c. User Weight: Min 300lbs

d. Features include: Mechanism to provide biomechanically correct strength profiles for both exercises without needing to change the weight setting between exercises. Kneepads and dual foot positions provide comfortable leg support and reduce torque around the knees. Elevated weight stack is easily accessible from a seated position. Work arm adjusts in multiple positions for a variety of user ranges of motion.

2. Plate loaded T Bar Row

a. Size max: (L x W x H): 85" x 35" x 25"

b. Equipment weight max: 200 lbs (90. 7 kg)

c. User Weight: Min 350lbs

d. Resistance: min starting Resistance: 40 lbs (18 kg)

e. Min Weight Capacity: 570 lbs (258.5 kg)

f. Storage Capacity: min 5 x 45 lb plates on front Weight Rod ,4 x 45 lb plates on back

Weight Rods (per rod)

g. Features: Distance from floor to foot plates: not to exceed 10" (25.4 cm), Distance between neutral grip handles (on center): not to exceed 9" (22.8 cm) Plate loading in front and rear to help reduce weight ratio for more explosive lifts Rear weight rods allow for smaller weight adjustments. Multiple grip angles help target different back muscles during exercise

3. Plate Loaded Seated Leg Curl

a. Size max: (D x W x H): 60" x 60" x 55"

b. Machine Weight max: 330 lbs (150 kg)

c. User Weight: Min 350lbs

d. Resistance: Starting Resistance: not to exceed 3 lbs (1.4 kg) Max Weight Capacity: 4 x45 lb (3 x 25 kg) plates

e. Weight Storage min: Number of Weight Horns: 4, Weight Horn Plate Capacity: 4 x 45 lb

(3 x 25 kg) plates/horn

f. Features: Allows leg flexion from a seated position to minimize lower back pressure, Adjustable back pad accommodates use by a variety of body sizes. Has handle that allows user to position legs properly and act as a self-spotter

4. Plate loaded Glute Drive

a. Size max: (D x W x H): 70" x 60" x 45

b. Equipment weight max: 330 lbs (149.6 kg)

c. User Weight: Min 350lbs

d. Start Resistance: not to exceed 45 lbs (20 kg) Min Training Capacity: 350 lbs (159 kg)

e. Features: Distance from floor to seat pad: not to exceed 16" (41 cm) Foot Platform angle:

between 13-17°. Half Round back pads have high density injection molded foam with spinal cord relief gaps for added comfort. Coated angled foot platform to create a non-slip contact point to anchor the heels during exercise. Dual-loop Strap provides a high lift-off point for users of varying sizes. Band pegs for variable resistance and explosive training.

f. Storage Capacity: min 4 Weight Horns

5. Plate Loaded Seated Calf Raise

a. Size max (L x W x H): 55" x 35" x 45"

b. Machine Weight max: 200 lbs (90. 7 kg)

c. User Weight: Min 350lbs

d. Resistance: Starting Resistance: not to exceed 60 lbs (27.2 kg) Max Weight Capacity: 5 x

45 lb (4 - 25 kg) plates/rod

e. Features: Pivoting seat to allow user to use their own bodyweight. Foot platform is angled in at least two planes to allow for natural foot movement Range-of-motion release located in front of the user.

6. Plate Loaded Vertical Squat

a. Size max (D x W x H): 100" x 50" x 75"

b. Machine Weight max: 530 lbs (240.4 kg)

c. User Weight: Min 350 lbs (158.8 kg)

d. Resistance: Starting Resistance: not to exceed 54 lbs (24.5 kg) Max Weight Capacity: 6 x

45 lb (5 x 25 kg) plates/rod

e. Weight Storage: Number of Weight Horns: min 4. Weight Horn Plate Capacity: min 4 -x45 lb (3 x 25 kg) plates/horn

f. Features: Provides natural squatting motion compared to traditional leg press or hack squat movements.

Curved arc of motion reduces back and knee strain.

7. Iso-Lateral Leg press

a. Size max (D x W x H): 75" x 65" x 60"

b. Machine Weight max: 610 lbs (276.7 kg)

c. User Weight: min 350 lbs (158.8 kg)

d. Resistance: Starting Resistance: not to exceed 14 lbs (6.3 kg) per work-arm, Weight

Capacity: max 5 x 45 lb (4 x 25 kg) plates/rod

e. Features: Seat is angled between 30-40 degrees and adjusts no more than ½" increments. Footplates are designed to keep the ankle joint at 90-degrees throughout the entire movement to minimize undesirable forces.

8. Iso-Lateral leg Extension

a. Size max (D x W x H): 65" x 60" x 55"

b. Machine Weight max: 300 lbs (136 kg)

c. User Weight: min 350 lbs (158.8 kg)

d. Resistance: Starting Resistance not ot exceed 5 lbs (2.2 kg) per work arm, Weight

Capacity: min 3 x 45 lb (3 x 25 kg) plates/rod

e. Features: Two independently rotating work-arms that are angled between 3-6 degrees outward. Adjustable back pad to accommodate many different body sizes. Two resistance loading positions provide dual strength curves. Has standard range limiter.

9. Iso-Lateral Leg Curl

a. Size max (D x W x H): 70" x 60" x 45"

b. Machine Weight max: 290 lbs (131.5 kg)

c. User Weight: min 350 lbs (158.8 kg)

d. Resistance: Starting resistance: not to exceed 2 lbs (0.9 kg) per work-arm. Min Weight

Capacity: 3 x45 lb (2 x 25 kg) plates/rod

e. Storage Number of Weight Horns: min 4. Weight Horn Plate Capacity: min 3 x 45 lb (2 x

25 kg) plates/horn

f. Features: Independently rotating work-arms that are angled between 3-6 degrees outward. Has range-limiting device attached to each work-arm to allow for short arc training.

10. Iso- Lateral Kneeling Leg Curl

a. Size max (D x W x H): 40" x 55" x 50"

b. Machine Weight max: 250 lbs (113.4 kg)

c. User Weight: min 350 lbs (158.8 kg)

d. Resistance: Starting resistance not to exceed 8 lbs (3.6 kg) per work-arm, Weight Capacity: min 4 x 25 lb (3 x 10 kg) plates/rod

e. Storage: Number of Weight Horns: min 4, Weight Horn Plate Capacity: min 4 x 45 lb (3 x 25 kg) plates/horn

f. Features: Kneeling position optimizes alignment with axis of rotation for users of various sizes. Machine design isolates hamstrings while minimizing back strain. Pads swivel to support knee while exercising opposite leg. Handles provide extra stabilization during exercise.

11. Standing Calf Raise Machine

a. Size max (L x W x H): 60" x 45" x 75"

b. Machine Weight max: 680 lbs (308 kg)

c. Weight Stack min: 390 lbs (195 kg)

d. Features: Adjustable height positions accommodate different height users. Contoured non-slip footplate allowing for a full range-of-motion for users' ankles

12. Linear Leg Press

a. Size max (L x W x H): 95" x 65" x 60"

b. Machine Weight max: 630 lbs (285 kg)

c. User Weight: Min 300lbs

d. Resistance: Starting Resistance: not to exceed 118 lbs (53 kg), Weight Capacity: min 10 x 45 lb (9 x 25 kg) plates/rod

e. Storage: Number of Weight Horns: min 4, Weight Horn Plate Capacity: min 4 x 45 lb (3 x

25 kg) plates/horn

f. Features: Flip-in, flip-out racking mechanism. Molded pads for longer life and higher durability.

13. Hip and Glute Machine

a. Size max (L x W x H): 65" x 40" x 75"

b. Machine Weight max: 525 lb (238 kg)

c. Weight Stack: min 295 lb (138 kg)

d. Features: Cables lubricated, and nylon coated. Pulleys feature sealed bearings.

Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings;

weight selector pin is connected to stack to prevent loss; Drop down incremental weight system. Spray-coated for impact, corrosion, and abrasion resistance. Grips are retained with collars, preventing them from slipping during use; Hand grips are non-absorbing and wear-and-tear resistant.

14. Olympic Decline bench

a. Size max (L x W x H): 70" x 55" x 55"

b. Machine Weight max: 275 lbs (125 kg) Min Weight Capacity: 550 lbs (249 kg)

c. Features: Back pad angled between 13 and 16° decline. Rollers and shin pad for added stabilization during lift.

i. Minimum 3 Gun Rack height positions not to exceed 5" (12.7 cm) between positions, Highest Position (from floor): not to exceed 37" (94 cm) Lowest Position (from floor): not to exceed 27" (68.5 cm)

ii. Compatible with O-BWS

iii. Replaceable urethane supports to protect Barbells from metal-on-metal contact.

15. Iso-Lateral Bench Press

a. Size max (D x W x H): 50" x 70" x 75"

b. Machine Weight max: 350 lbs (158.8 kg)

c. User Weight: min 350 lbs (158.8 kg)

d. Resistance: Starting Resistance: not ot exceed 7 lbs (3.2 kg) per work-arm, Weight

Capacity: min 5 x 45 lb (4 x 25 kg) plates/rod

e. Storage: Number of Weight Horns: min 6, Weight Horn Plate Capacity: min 4 -x45 lb (3 x 25 kg) plates/horn

f. Features: Work-arms move independently. Has a vertical grip for in-season athletes battling wrist, elbow, and shoulder soreness or injury.

16. Pectoral Fly/ rear deltoid Machine

a. Size max (D x W x H): 50" x 60" x 75" (metric cm: 124 x 142 x 180)

b. Machine Weight max: 580 lb (263 kg)

c. User Weight: min 300lbs

d. Weight Stack: min 295lbs (138kg)

e. Feature: Roller mechanism on seat adjustment provides smooth operation. Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings; 7 weight selector pin is connected to stack to prevent loss; Drop down incremental weight system. Grips are retained with collars, preventing them from slipping during use;

Hand grips are non-absorbing and wear-and-tear resistant.

17. Seated Arm Curl (for ez curl bars or barbells not a machine)

a. Size max (L x W x H): 40" x 35" x 45"

b. Machine Weight max: 150 lbs (68 kg) Min weight Capacity: 400 lbs (181.4 kg)

c. Features: Height from floor to top of Bar Catch: not to exceed 23.5" (59.7 cm) Elbow pad angled between 35 and 45°

d. Seat pad angled forward between 7 and 9° to ensure user stabilization.

18. 12 -Sided Poly Urethane EZ Curl Bars (20-110lbs) with Rack

a. 12-sided urethane barbells with anti-roll heads and EZ curl handles.

b. Barbell rack holds all 10 bars

19. All Machines will be same in color. Prefer Platinum or black Frame with black Upholstery. Each machine will be its own independent machine. All machines will be constructed with metal or alloy per professional industry standards.

20. Installation quotes must be provided and must be itemized separately from shipping.

21. Any Shipping costs will be provided with the equipment cost.

22. Shipping Location is as follows for calculating Freight cost.

HHC Supply- HPW 19th SFG(A)

BLDG 9500

17800 S Camp Williams Rd Bluffdale UT 84065