Room finish schedule.xlsx

This is a Room Finish Schedule specification document that details the interior finishes and materials required for a REACT VII facility construction project at Building 9001. The schedule specifies finishes for four rooms: two offices (Rooms 101-102) and two material testing rooms (Rooms 103-104), with standardized material specifications applied across all spaces. Floor finishes include carpet tile over epoxy (CT over EP-1) in offices and full epoxy flooring (EP-1) in testing rooms, extending to the centerline of perimeter walls and to the whiteline at Aisle 19 on the east wall. Base trim consists of 4.5-inch Roppe black 1/8-inch vinyl cove wall base (B-1) throughout. Wall finishes specify Sherwin Williams High Reflective White PROMAR 200 Zero VOC interior latex with eggshell sheen in two applications: PT-1 for standard walls and PT-2 with full-height orange peel finish, both meeting ASTM Finish Level 4 standards. Ceiling finishes vary by location, incorporating 2x2 acoustical grid ceilings (CLG-1) and 5/8-inch gypsum board with tape and bed finish Level 4 (CLG-2) in appropriate areas. Exposed exterior walls receive the same wall and base finishes as interior spaces. This specification is directly associated with solicitation FA813726R0026, which is reserved exclusively for SBA-certified Women Owned Small Businesses (WOSB) and requires attendance at a mandatory Initial Site Visit on July 20, 2026, at 0900 CST at Building 9001's northwest parking lot.