Amendment03_Ammo.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NO.

3. EFFECTIVE DATE

06/30/2015

4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

BCOCODE

Federal Bureau of Prisons Central Office

320 FIRST STREET NW

WASHINGTON, DC 20534

Wesley Jenkins (w2jenkins@bop.gov)

6. ISSUED BY CODE7. ADMINISTERED BY (If other than Item 6)

9A. AMENDMENT OF SOLICITATION NO.

RFQP0700NAS0438-2015

CODE FACILITY CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, country, state and ZIP Code) (X)

X 9B. DATED (SEE ITEM 11)

06/25/2015

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X XThe above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing items 8 and 15, and returning ____copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______ copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The purpose of this amendment is as follows:

1) The velocity requirement for the 9mm Luger 115 Grain Jacketed Round has changed from 1100+/-50 fps to 1175 fps., with a +/- of 75 fps.

2) The 9mm Luger 115 Grain Jacketed Round evaluation sheet has been corrected and incorporated into the solicitation.

All other terms and conditions remain the same.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

Wesley Jenkins

(Signature of person authorized to sign)

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED

By (Signature of Contracting Officer)

16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

NSN 7540-01-152-8070

Previous edition unusable

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

RFQP0700NAS0438-2015/0003 Page 1 of 1 bop38336 Typewritten Text bop38336 Typewritten Text x bop38336 Typewritten Text bop38336 Typewritten Text bop38336 Typewritten Text 6/30/2015

Manufacturer ___________________

Bureau of Prisons 9mm Luger 115 Grain Jacketed Hollow Point Round Specification Criteria

Evaluator Name: __________________________ Title: _______________________________

Range Location: __________________________ Date of Evaluation: _________________

Manufacturer: ____________________________

1. CASE: The case shall be new brass manufactured in compliance with the Sporting Arms and Ammunition Manufacturers Institute (SAAMI) specifications.

Acceptable Unacceptable

2. HEADSTAMP: Each loaded cartridge shall be head stamped with the manufacturer’s symbol and appropriated cartridge designation.

3. PROJECTILE: The projectile shall be 115 Grain Jacketed Hollow Point with a nose cavity of sufficient size and configuration to facilitate expansion in the body tissue. The projectile shall feed reliable in all commercially available semi-automatic pistols and submachine guns.

4. VELOCITY: 1175 +/- 75 feet per second average instrumental velocity for 10 rounds fired from a Ruger P95DAO semi-automatic measured at 15 feet.

5. DISPERSION: The ammunition shall be capable of firing a maximum average group of 3" extreme spread at 25 yards (5/5 shot groups) from a Ruger KP95DAOPR15 semi-automatic in a machine rest.

Manufacturer ___________________

6. PRESSURE: Chamber pressure shall be in accordance with SAAMI specifications.

7. PRIMER SEALANT: Water resistant lacquer.

8. PROPELLANT DETECTION: 100% mechanical and/or electrical detection of propellant levels within the cartridge.

9. VISUAL INSPECTION: 100% visual inspection of finished cartridges prior to packaging.

10. LOT IDENTIFICATION: The manufacturer shall assign each lot with a unique identification number which will include the day, month, and year of manufacture, plant in which manufactured, and assembly line or machine on which manufactured. The manufacturer will furnish FBOP with a key for decoding the lot number.