Attachment A - Statement of Work - Milling Equipment.pdf
PDF 141 KB Posted
- Attached to
- Milling Equipment
- Solicitation number
- RFQ511741
- Issued by
-
Department of Energy
About this file
This is a Statement of Work for the procurement of milling equipment dated 10/5/26. The government seeks to acquire one compact, high-speed machining system capable of producing intricate parts efficiently within a limited workspace. The system must provide a user-friendly operating environment with intuitive controls, rapid setup, and plug-and-play functionality to support streamlined machining operations in a laboratory setting with space constraints.
The required machining system must be a standalone floor unit no wider than 32 inches with a working area of at least 18" x 15" x 5" (XxYxZ). Technical specifications include 220–240 volts single-phase power, a 2kW 40,000rpm high-frequency spindle with 8mm collet, touchscreen-based control system with intuitive operating software, 3D machining simulation capability, 24-tool automatic changer with automatic tool measurement, handheld remote control with machine override functions, touchscreen monitor terminal, integrated camera for workpiece identification, integrated touch probe for workpiece registration, internal spindle cooling system with pump and reservoir, microjet mist coolant system with 2-liter tank and two nozzles, and vacuum work holding ports with compressed air connections. The vendor shall deliver one fully assembled system with all specified standard features and accessories, provide delivery to the designated site, perform installation and startup assistance, furnish operator documentation and basic user training, and supply warranty information and technical support contact details.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work Procurement of Milling Equipment
10/5/26
1. Purpose
The purpose of this procurement is to acquire a compact, high-speed machining system capable of producing intricate parts efficiently within a limited workspace. The system must provide a user-friendly operating environment, intuitive controls, rapid setup, and plug-and-play functionality to support streamlined machining operations.
2. Scope of Work
The vendor shall provide one Machining System, or equal, including delivery, installation, and operational setup. The machine shall be suitable for high-speed machining in a compact footprint due to space constraints in the lab.
3. Minimum Required Features
The system shall include, at a minimum, the following standard components and capabilities:
• Standalone Floor unit
• 32” wide or less to allow for mobility within the facility
• Working area (XxYxZ) at least (18” x 15” x 5”)
• Power: 220 – 240 volts single phase
• 2kW, 40,000rpm high-frequency spindle with 8 mm collet
• Touchscreen-based control system with intuitive operating software
• 3D machining simulation capability
• 24-tool automatic changer with automatic tool measurement
• Handheld remote control with machine override functions
• touchscreen monitor terminal
• Integrated camera for workpiece identification
• Integrated touch probe for workpiece registration
• Internal spindle cooling system with pump and reservoir
• Microjet mist coolant system with 2-liter tank and two nozzles
• Vacuum work holding ports and compressed air connections
4. Deliverables
• The vendor shall provide:
• One fully assembled machining system with all specified standard features
• All listed accessories and options
• Delivery to the designated site
• Installation and startup assistance
• Operator documentation and basic user training
• Warranty information and technical support contact details
File details come from the government source that posted it. Updated .