RFQ19001_Aug_30_24_solicitation_doc.pdf

PDF 18 KB Posted

Attached to
FILTRATION DUST COLLECTOR
Solicitation number
RFQ19001
Issued by
Clark County, Missouri

About this file

This document is a Request for Quote (RFQ) issued by the Missouri Department of Revenue (DOR) for a Filtration Dust Collector. The RFQ seeks a dust collector that is compatible with an Ameri-Shred 4000 Series 3 industrial paper shredder, runs on a 3-phase, 208 volt electrical system, and can handle approximately 1200 cubic feet of throughput per minute with a 98% efficiency or better on particles 0.5 micron and larger. The RFQ has a solicitation period from October 12, 2018 to November 9, 2018, and a site visit is available upon request. The contractor must provide all electrical connections required to connect the equipment to the onsite electrical system.

The RFQ requires vendors to provide pricing for the dust collector as well as optional pricing for a cover for the existing output conveyor, and all duct and pipe work to connect the dust collector to the shredder. The payment terms are Net 45 Days, and the delivery must be Free On Board Destination. There is no indication of any set-asides, incumbents, or funding sources in the RFQ.

View the file

Other files

Show all 26

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Solicitation Number: RFQ19001

FILTRATION DUST COLLECTOR

Request for Quote (RFQ)

DOR - Dept of Revenue

October 12, 2018 - November 09, 2018

Page:2

General Header Information

RFQ19001

No. RFQ19001 Title: FILTRATION DUST COLLECTOR Start Date: October 12, 2018 at 9:00:00 AM CDT End Date: November 09, 2018 at 2:00:00 PM CST Vendor Q&A Start Date:

Vendor Q&A End Date:

Estimated Total Value:

Who can respond to this bid? : All Vendors Description: Filtration dust collector: Must be compatible with an Ameri-Shred 4000

Series 3 industrial paper shredder. Must run on a 3-phase, 208 volt electrical system. Must be able to handle approximately 1200 cubic feet of throughput per minute. Must meet a 98% efficiency or better on particles 0.5 micron and larger. Contractor must provide all electrical connections required to connect the equipment to the electrical system onsite.

Delivery Terms: Free On Board Destination Payment Terms: Net 45 Days Contact Information: DOR - Dept of Revenue

Laura Stark 301 West High Street Jefferson City MO, 65101 United States Tel: 573-751-1760 Fax:

Laura.Stark@dor.mo.gov

Contact Details: If you have any questions, please contact:

Laura Stark 301 West High Street Jefferson City MO, 65101 United States Tel: 573-751-1760 Fax:

Laura.Stark@dor.mo.gov

Selected Categories:

Page:3

Header Custom Fields:

RFQ19001

NOTICE

Vendor Responsibility

The vendor is solely responsible for ensuring timely submission of their solicitation response, whether submitting an online response or a hard copy response. Failure to allow adequate time prior to the solicitation end date to complete and submit a response to a solicitation, particularly in the event technical support assistance is required, places the vendor and their response at risk of not being accepted on time.

The State of Missouri's Privacy Policy can be accessed here.

http://www.mo.gov/privacy-policy/

Page:4

Solicitation Requirements:

This quote has no questions defined.

RFQ19001

Filtration Dust Collector

The contractor shall provide a Filtration Dust Collector for the Department of Revenue (hereinafter referred to as the Department), in accordance with the provisions and requirements stated herein and to the sole satisfaction of the Department.

Must be compatible with an Ameri-Shred 4000 Series 3 industrial paper shredder.

Must run on a 3-phase, 208 volt electrical system.

Must be able to handle approximately 1200 cubic feet of throughput per minute.

Must meet a 98% efficiency or better on particles 0.5 micron and larger

Proposal should include optional pricing for a cover for the existing output conveyor, all duct and pipe work to connect the dust collector to the shredder.

Contractor must provide all electrical connections required to connect the equipment to the electrical system onsite. A tour of the facility will be made available upon request.

Page:5

Documents:

RFQ for Filtration dust collector.docx

Page:6

Item Specifications Solicitation has been designated as having no line items.

Page:7

File details come from the government source that posted it. Updated .