RFQ W9128F22Q0002.pdf
PDF 1 MB Posted
- Solicitation number
- W9128F22Q0002
About this file
This request for quotation solicits offers for internal tank inspections at Seymour Johnson Air Force Base. The required inspections include STI tests on E85, MOGAS, and diesel fuel tanks, as well as API inspections on bulk and hydrant tanks. External API inspections are also required on hydrant tanks, and may include UT testing, replacing wiper seals, producing strapping charts, and fuel storage or transfer services. Offers are due by December 17, 2021. The awarded contractor must provide all necessary personnel, equipment, materials, and supervision to remove or transfer remaining fuel; clean the tanks; and perform in-service or out-of-service inspections in compliance with applicable industry, federal, state, and military standards.
View the file
Other files
Show all 28
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SEE ADDENDUM
(No Collect Calls)
W9128F22Q0002 03-Dec-2021
b. TELEPHONE NUMBER
402-995-2210
8. OFFER DUE DATE/LOCAL TIME
02:00 PM 17 Dec 2021
5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE
AUTHORIZED FOR LOCAL REPRODUCTION
PREVIOUS EDITION IS NOT USABLE
STANDARD FORM 1449 (REV. 2/2012)
Prescribed by GSA – FAR (48 CFR) 53.212
(TYPE OR PRINT)
(SIGNATURE OF CONTRACTING OFFICER)
ADDENDA ARE
26. TOTAL AWARD AMOUNT (For Gov t. Use Only )
23.
CODE 10. THIS ACQUISITION IS
SUCH ADDRESS IN OFFER
17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT
BELOW IS CHECKED
TELEPHONE NO.
W9128F9. ISSUED BY
18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK
7. FOR SOLICITATION
INFORMATION CALL:
a. NAME
NICOLE L PARKER
2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER
(TYPE OR PRINT)
30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER
30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA
0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.
25. ACCOUNTING AND APPROPRIATION DATA
1. REQUISITION NUMBER
20.
ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.
OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30
SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS
ARE NOT ATTACHED
27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED
(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE
SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:
. YOUR OFFER ON SOLICITATION
28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN
% FOR:SET ASIDE:UNRESTRICTED OR X
SMALL BUSINESS
17a.CONTRACTOR/ CODE FACILITY
OFFEROR CODE
U.S. ARMY CORPS OF ENGINEERS, OMAHA DIST
CONTRACTING OFFICE
1616 CAPITOL AVENUE
OMAHA NE 68102-4901
18a. PAYMENT WILL BE MADE BY CODE
RATED ORDER UNDER
DPAS (15 CFR 700)
13a. THIS CONTRACT IS A
13b. RATING
CODE15. DELIVER TO CODE 966752 16. ADMINISTERED BY
12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-
TION UNLESS BLOCK IS
MARKED
SEE SCHEDULE
14. METHOD OF SOLICITATION
RFQ IFB RFPX
COE PROGRAMS MANAGEMENT BRANCH
LAURA STEPHENS
USA, OMAHA CENWO-PM-P
1616 CAPITOL AVE
OMAHA NE 68102-4901
TEL: 402-995-2802 FAX:
FAX:
TEL: SERVICE-DISABLED
VETERAN-OWNED
SMALL BUSINESS
X 8(A)
HUBZONE SMALL
BUSINESS
SIZE STANDARD:
$16,500,000
NAICS:
541990
X
OFFER DATED
29. AWARD OF CONTRACT: REF.
DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY
COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND
EMAIL:
TEL:
31c. DATE SIGNED
SEE SCHEDULE
SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT
24.22.21.19.
WOMEN-OWNED SMALL BUSINESS (WOSB)
ELIGIBLE UNDER THE WOMEN-OWNED
SMALL BUSINESS PROGRAM
EDWOSB
32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE
SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS
(CONTINUED)
PAGE 2 OF56
ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________
32a. QUANTITY IN COLUMN 21 HAS BEEN
RECEIVED INSPECTED
32b. SIGNATURE OF AUTHORIZED GOVERNMENT
REPRESENTATIVE
32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT
REPRESENTATIVE
32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE
37. CHECK NUMBER
FINALPARTIALCOMPLETE
36. PAYMENT35. AMOUNT VERIFIED
CORRECT FOR
34. VOUCHER NUMBER
FINAL
33. SHIP NUMBER
PARTIAL
38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY
41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT
41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE
42a. RECEIVED BY (Print)
42b. RECEIVED AT (Location)
42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS
STANDARD FORM 1449 (REV. 2/2012) BACK
Prescribed by GSA – FAR (48 CFR) 53.212
AUTHORIZED FOR LOCAL REPRODUCTION
PREVIOUS EDITION IS NOT USABLE
SEE SCHEDULE
20.
SCHEDULE OF SUPPLIES/ SERVICES
21.
QUANTITY UNIT
22. 23.
UNIT PRICE
24.
AMOUNT
19.
ITEM NO.
W9128F22Q0002
Section SF 1449 - CONTINUATION SHEET
DELIVERY INFORMATION
CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /
CAGE
0001 365 dys. ADC 1 COE PROGRAMS MANAGEMENT
BRANCH
LAURA STEPHENS
USA, OMAHA CENWO-PM-P
1616 CAPITOL AVE
OMAHA NE 68102-4901
402-995-2802 FOB: Destination
966752
0002 365 dys. ADC 1 (SAME AS PREVIOUS LOCATION)
0003 365 dys. ADC 1 (SAME AS PREVIOUS LOCATION)
0004 365 dys. ADC 1 (SAME AS PREVIOUS LOCATION)
0005 365 dys. ADC 1 (SAME AS PREVIOUS LOCATION)
0006 365 dys. ADC 1 (SAME AS PREVIOUS LOCATION)
0007 365 dys. ADC 1 (SAME AS PREVIOUS LOCATION)
0008 365 dys. ADC 1 (SAME AS PREVIOUS LOCATION)
0009 365 dys. ADC 1 (SAME AS PREVIOUS LOCATION)
INSPECTION AND ACCEPTANCE TERMS
Supplies/services will be inspected/accepted at:
CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY
0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government
ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT
0001 1 Job STI Out of Service Facility FOB 4.1
FFP
STI Out of Service Tank Inspection Service – Facility FOB 4.1 All work to conduct Kick-Off Meeting, complete transfer/removal of fuel, complete tank cleaning, Complete STI In Service tank inspection, complete visual inspection of containment, complete strapping charts, and complete DRAFT and FINAL reports.
PSC CD: H391
NET AMT
0002 1 Job API Out of Service Facility 10104
FFP
API Out of Service Tank Inspection Service – Facility 10104 All work to conduct Kick-Off Meeting, complete transfer/removal of fuel, complete tank cleaning, Complete API Out-of-Service tank inspection, complete visual inspection of containment, complete UT and Roundness Survey and complete DRAFT and FINAL reports.
0003 1 Job API Out of Service Facility 10241
FFP
API Out of Service Tank Inspection Service – Facility 10241 All work to conduct Kick-Off Meeting, complete transfer/removal of fuel, complete tank cleaning, Complete API Out-of-Service tank inspection, complete visual inspection of containment, complete UT and Roundness Survey and complete DRAFT and FINAL reports.
0004 1 Job API In Service Facility 10242
FFP
API In Service Tank Inspection Service – Facility 10242 All work to conduct Kick-Off Meeting, Complete API In-Service tank inspection, complete visual inspection of containment, complete strapping charts, and complete DRAFT and FINAL reports.
0005 1 Job STI In Service Facility FOB 3.8
FFP
STI In Service Facility FOB 3.8 All work to conduct Kick-Off Meeting, Complete API In-Service tank inspection, complete visual inspection of containment, complete strapping charts, and complete DRAFT and FINAL reports.
0006 1 Job STI In Service Facility FOB 3.9
FFP
STI In Service Facility FOB 3.9 All work to conduct Kick-Off Meeting, Complete API In-Service tank inspection, complete visual inspection of containment, complete strapping charts, and complete DRAFT and FINAL reports.
0007 1 Job AP Out of Service Facility 10227
FFP
API Out of Service Tank Inspection Service – Facility 10227 All work to conduct Kick-Off Meeting, Complete API In-Service tank inspection, complete visual inspection of containment, complete strapping charts, and complete DRAFT and FINAL reports.
0008 1 Job AP Out of Service Facility 10206
FFP
API Out of Service Tank Inspection Service – Facility 10206 All work to conduct Kick-Off Meeting, Complete API In-Service tank inspection, complete visual inspection of containment, complete strapping charts, and complete DRAFT and FINAL reports.
0009 1 Job AP Out of Service Facility 10208
FFP
API Out of Service Tank Inspection Service – Facility 10208 All work to conduct Kick-Off Meeting, Complete API In-Service tank inspection, complete visual inspection of containment, complete strapping charts, and complete DRAFT and FINAL reports.
WAGE DETERMINATION
"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR
THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION
By direction of the Secretary of Labor | WAGE AND HOUR DIVISION
| WASHINGTON D.C. 20210
| Wage Determination No.: 2015-4379 Daniel W. Simms Division of | Revision No.: 17 Director Wage Determinations| Date Of Last Revision: 10/20/2021 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.95 for calendar year 2021 applies to all contracts subject to the Service Contract
Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.95 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2021. The EO minimum wage rate will be adjusted annually.
Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.
State: North Carolina
Area: North Carolina County of Wayne
**Fringe Benefits Required Follow the Occupational Listing**
OCCUPATION CODE - TITLE FOOTNOTE RATE
01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.48 01012 - Accounting Clerk II 16.26 01013 - Accounting Clerk III 18.19 01020 - Administrative Assistant 24.84 01035 - Court Reporter 18.51 01041 - Customer Service Representative I 13.89 01042 - Customer Service Representative II 15.63 01043 - Customer Service Representative III 17.05 01051 - Data Entry Operator I 13.47 01052 - Data Entry Operator II 14.70 01060 - Dispatcher Motor Vehicle 23.02 01070 - Document Preparation Clerk 14.75 01090 - Duplicating Machine Operator 14.75 01111 - General Clerk I 14.01 01112 - General Clerk II 15.29 01113 - General Clerk III 17.17 01120 - Housing Referral Assistant 20.64 01141 - Messenger Courier 12.02 01191 - Order Clerk I 13.51 01192 - Order Clerk II 14.75 01261 - Personnel Assistant (Employment) I 16.53 01262 - Personnel Assistant (Employment) II 18.49 01263 - Personnel Assistant (Employment) III 20.61 01270 - Production Control Clerk 26.66 01290 - Rental Clerk 15.24 01300 - Scheduler Maintenance 16.55 01311 - Secretary I 16.55 01312 - Secretary II 18.51 01313 - Secretary III 20.64 01320 - Service Order Dispatcher 20.45 01410 - Supply Technician 24.84 01420 - Survey Worker 16.19 01460 - Switchboard Operator/Receptionist 13.71 01531 - Travel Clerk I 12.69 01532 - Travel Clerk II 13.34 01533 - Travel Clerk III 14.06 01611 - Word Processor I 14.75 01612 - Word Processor II 16.55 01613 - Word Processor III 18.51 05000 - Automotive Service Occupations
05005 - Automobile Body Repairer Fiberglass 21.11 05010 - Automotive Electrician 19.33 05040 - Automotive Glass Installer 17.76 05070 - Automotive Worker 17.76 05110 - Mobile Equipment Servicer 15.82 05130 - Motor Equipment Metal Mechanic 19.71 05160 - Motor Equipment Metal Worker 17.76 05190 - Motor Vehicle Mechanic 19.71 05220 - Motor Vehicle Mechanic Helper 14.83 05250 - Motor Vehicle Upholstery Worker 16.17 05280 - Motor Vehicle Wrecker 17.76 05310 - Painter Automotive 18.99 05340 - Radiator Repair Specialist 17.76 05370 - Tire Repairer 13.78 05400 - Transmission Repair Specialist 19.71 07000 - Food Preparation And Service Occupations 07010 - Baker 15.83 07041 - Cook I 13.65 07042 - Cook II 15.47 07070 - Dishwasher 9.04 07130 - Food Service Worker 10.26 07210 - Meat Cutter 16.89 07260 - Waiter/Waitress 9.32 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 21.17 09040 - Furniture Handler 13.98 09080 - Furniture Refinisher 21.17 09090 - Furniture Refinisher Helper 16.37 09110 - Furniture Repairer Minor 18.77 09130 - Upholsterer 21.17 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 11.61 11060 - Elevator Operator 13.32 11090 - Gardener 16.99 11122 - Housekeeping Aide 13.32 11150 - Janitor 13.32 11210 - Laborer Grounds Maintenance 13.52 11240 - Maid or Houseman 10.66 11260 - Pruner 12.44 11270 - Tractor Operator 15.82 11330 - Trail Maintenance Worker 13.52 11360 - Window Cleaner 14.48 12000 - Health Occupations 12010 - Ambulance Driver 19.22 12011 - Breath Alcohol Technician 19.22 12012 - Certified Occupational Therapist Assistant 26.36 12015 - Certified Physical Therapist Assistant 28.62 12020 - Dental Assistant 19.19 12025 - Dental Hygienist 35.91 12030 - EKG Technician 29.11 12035 - Electroneurodiagnostic Technologist 29.11 12040 - Emergency Medical Technician 19.22 12071 - Licensed Practical Nurse I 17.18 12072 - Licensed Practical Nurse II 19.22 12073 - Licensed Practical Nurse III 21.42 12100 - Medical Assistant 16.60 12130 - Medical Laboratory Technician 17.18 12160 - Medical Record Clerk 14.92 12190 - Medical Record Technician 17.33 12195 - Medical Transcriptionist 17.18 12210 - Nuclear Medicine Technologist 42.22 12221 - Nursing Assistant I 12.19
12222 - Nursing Assistant II 13.70 12223 - Nursing Assistant III 14.95 12224 - Nursing Assistant IV 16.79 12235 - Optical Dispenser 19.22 12236 - Optical Technician 17.18 12250 - Pharmacy Technician 17.03 12280 - Phlebotomist 17.00 12305 - Radiologic Technologist 28.31 12311 - Registered Nurse I 26.09 12312 - Registered Nurse II 31.91 12313 - Registered Nurse II Specialist 31.91 12314 - Registered Nurse III 38.62 12315 - Registered Nurse III Anesthetist 38.62 12316 - Registered Nurse IV 46.28 12317 - Scheduler (Drug and Alcohol Testing) 23.81 12320 - Substance Abuse Treatment Counselor 22.12 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.64 13012 - Exhibits Specialist II 23.09 13013 - Exhibits Specialist III 28.24 13041 - Illustrator I 18.64 13042 - Illustrator II 23.09 13043 - Illustrator III 28.24 13047 - Librarian 25.57 13050 - Library Aide/Clerk 14.84 13054 - Library Information Technology Systems 23.09 Administrator 13058 - Library Technician 18.64 13061 - Media Specialist I 16.67 13062 - Media Specialist II 18.64 13063 - Media Specialist III 20.77 13071 - Photographer I 16.67 13072 - Photographer II 18.64 13073 - Photographer III 23.09 13074 - Photographer IV 28.24 13075 - Photographer V 34.18 13090 - Technical Order Library Clerk 18.64 13110 - Video Teleconference Technician 16.67 14000 - Information Technology Occupations 14041 - Computer Operator I 14.20 14042 - Computer Operator II 15.88 14043 - Computer Operator III 18.75 14044 - Computer Operator IV 19.68 14045 - Computer Operator V 21.79 14071 - Computer Programmer I (see 1) 22.75 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 14.20 14160 - Personal Computer Support Technician 19.68 14170 - System Support Specialist 22.33 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 30.58 15020 - Aircrew Training Devices Instructor (Rated) 36.99 15030 - Air Crew Training Devices Instructor (Pilot) 41.77 15050 - Computer Based Training Specialist / Instructor 30.58 15060 - Educational Technologist 25.36 15070 - Flight Instructor (Pilot) 41.77 15080 - Graphic Artist 22.78
15085 - Maintenance Test Pilot Fixed Jet/Prop 39.93 15086 - Maintenance Test Pilot Rotary Wing 39.93 15088 - Non-Maintenance Test/Co-Pilot 39.93 15090 - Technical Instructor 18.62 15095 - Technical Instructor/Course Developer 22.78 15110 - Test Proctor 15.03 15120 - Tutor 15.03 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 10.09 16030 - Counter Attendant 10.09 16040 - Dry Cleaner 11.92 16070 - Finisher Flatwork Machine 10.09 16090 - Presser Hand 10.09 16110 - Presser Machine Drycleaning 10.09 16130 - Presser Machine Shirts 10.09 16160 - Presser Machine Wearing Apparel Laundry 10.09 16190 - Sewing Machine Operator 12.46 16220 - Tailor 13.04 16250 - Washer Machine 10.70 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 21.56 19040 - Tool And Die Maker 26.44 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 14.62 21030 - Material Coordinator 26.66 21040 - Material Expediter 26.66 21050 - Material Handling Laborer 11.96 21071 - Order Filler 12.63 21080 - Production Line Worker (Food Processing) 14.62 21110 - Shipping Packer 16.18 21130 - Shipping/Receiving Clerk 16.18 21140 - Store Worker I 13.01 21150 - Stock Clerk 17.10 21210 - Tools And Parts Attendant 14.62 21410 - Warehouse Specialist 14.62 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 28.33 23019 - Aircraft Logs and Records Technician 22.60 23021 - Aircraft Mechanic I 26.93 23022 - Aircraft Mechanic II 28.33 23023 - Aircraft Mechanic III 29.72 23040 - Aircraft Mechanic Helper 19.71 23050 - Aircraft Painter 25.49 23060 - Aircraft Servicer 22.60 23070 - Aircraft Survival Flight Equipment Technician 25.49 23080 - Aircraft Worker 23.99 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 23.99 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 26.93
II
23110 - Appliance Mechanic 21.56 23120 - Bicycle Repairer 17.90 23125 - Cable Splicer 33.26 23130 - Carpenter Maintenance 18.76 23140 - Carpet Layer 20.28 23160 - Electrician Maintenance 25.36 23181 - Electronics Technician Maintenance I 24.54 23182 - Electronics Technician Maintenance II 26.07 23183 - Electronics Technician Maintenance III 27.55 23260 - Fabric Worker 19.11 23290 - Fire Alarm System Mechanic 22.77 23310 - Fire Extinguisher Repairer 17.90
23311 - Fuel Distribution System Mechanic 22.77 23312 - Fuel Distribution System Operator 17.90 23370 - General Maintenance Worker 18.11 23380 - Ground Support Equipment Mechanic 26.93 23381 - Ground Support Equipment Servicer 22.60 23382 - Ground Support Equipment Worker 23.99 23391 - Gunsmith I 17.90 23392 - Gunsmith II 20.28 23393 - Gunsmith III 22.77 23410 - Heating Ventilation And Air-Conditioning 19.74 Mechanic 23411 - Heating Ventilation And Air Contidioning 20.77 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 22.77 23440 - Heavy Equipment Operator 18.00 23460 - Instrument Mechanic 22.77 23465 - Laboratory/Shelter Mechanic 21.56 23470 - Laborer 11.96 23510 - Locksmith 21.56 23530 - Machinery Maintenance Mechanic 25.63 23550 - Machinist Maintenance 18.40 23580 - Maintenance Trades Helper 16.37 23591 - Metrology Technician I 22.77 23592 - Metrology Technician II 23.96 23593 - Metrology Technician III 25.13 23640 - Millwright 22.77 23710 - Office Appliance Repairer 21.56 23760 - Painter Maintenance 17.47 23790 - Pipefitter Maintenance 21.46 23810 - Plumber Maintenance 20.31 23820 - Pneudraulic Systems Mechanic 22.77 23850 - Rigger 22.77 23870 - Scale Mechanic 20.28 23890 - Sheet-Metal Worker Maintenance 22.77 23910 - Small Engine Mechanic 20.28 23931 - Telecommunications Mechanic I 23.46 23932 - Telecommunications Mechanic II 24.76 23950 - Telephone Lineman 22.77 23960 - Welder Combination Maintenance 20.30 23965 - Well Driller 22.77 23970 - Woodcraft Worker 22.77 23980 - Woodworker 17.90 24000 - Personal Needs Occupations 24550 - Case Manager 16.31 24570 - Child Care Attendant 11.68 24580 - Child Care Center Clerk 14.58 24610 - Chore Aide 11.02 24620 - Family Readiness And Support Services 16.31 Coordinator 24630 - Homemaker 16.31 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 22.77 25040 - Sewage Plant Operator 19.00 25070 - Stationary Engineer 22.77 25190 - Ventilation Equipment Tender 16.37 25210 - Water Treatment Plant Operator 19.00 27000 - Protective Service Occupations 27004 - Alarm Monitor 19.20 27007 - Baggage Inspector 17.16 27008 - Corrections Officer 17.78 27010 - Court Security Officer 17.50 27030 - Detection Dog Handler 19.20
27040 - Detention Officer 17.78 27070 - Firefighter 15.64 27101 - Guard I 17.16 27102 - Guard II 19.20 27131 - Police Officer I 19.36 27132 - Police Officer II 21.52 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 12.35 28042 - Carnival Equipment Repairer 13.26 28043 - Carnival Worker 9.71 28210 - Gate Attendant/Gate Tender 18.63 28310 - Lifeguard 16.60 28350 - Park Attendant (Aide) 20.85 28510 - Recreation Aide/Health Facility Attendant 16.25 28515 - Recreation Specialist 23.56 28630 - Sports Official 16.60 28690 - Swimming Pool Operator 18.94 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 20.28 29020 - Hatch Tender 20.28 29030 - Line Handler 20.28 29041 - Stevedore I 19.11 29042 - Stevedore II 21.56 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 41.86 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 28.86 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 31.79 30021 - Archeological Technician I 15.11 30022 - Archeological Technician II 18.98 30023 - Archeological Technician III 22.25 30030 - Cartographic Technician 22.36 30040 - Civil Engineering Technician 19.11 30051 - Cryogenic Technician I 22.33 30052 - Cryogenic Technician II 24.67 30061 - Drafter/CAD Operator I 15.11 30062 - Drafter/CAD Operator II 16.96 30063 - Drafter/CAD Operator III 18.98 30064 - Drafter/CAD Operator IV 22.83 30081 - Engineering Technician I 14.39 30082 - Engineering Technician II 16.14 30083 - Engineering Technician III 18.06 30084 - Engineering Technician IV 22.38 30085 - Engineering Technician V 27.38 30086 - Engineering Technician VI 33.12 30090 - Environmental Technician 19.53 30095 - Evidence Control Specialist 20.16 30210 - Laboratory Technician 22.43 30221 - Latent Fingerprint Technician I 22.33 30222 - Latent Fingerprint Technician II 24.67 30240 - Mathematical Technician 22.25 30361 - Paralegal/Legal Assistant I 17.55 30362 - Paralegal/Legal Assistant II 21.73 30363 - Paralegal/Legal Assistant III 26.59 30364 - Paralegal/Legal Assistant IV 32.17 30375 - Petroleum Supply Specialist 24.67 30390 - Photo-Optics Technician 21.48 30395 - Radiation Control Technician 24.67 30461 - Technical Writer I 21.77 30462 - Technical Writer II 26.63 30463 - Technical Writer III 32.22 30491 - Unexploded Ordnance (UXO) Technician I 26.61 30492 - Unexploded Ordnance (UXO) Technician II 32.19
30493 - Unexploded Ordnance (UXO) Technician III 38.58 30494 - Unexploded (UXO) Safety Escort 26.61 30495 - Unexploded (UXO) Sweep Personnel 26.61 30501 - Weather Forecaster I 22.33 30502 - Weather Forecaster II 27.16 30620 - Weather Observer Combined Upper Air Or (see 2) 18.98 Surface Programs 30621 - Weather Observer Senior (see 2) 20.69 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 32.19 31020 - Bus Aide 13.61 31030 - Bus Driver 18.26 31043 - Driver Courier 15.61 31260 - Parking and Lot Attendant 13.77 31290 - Shuttle Bus Driver 15.55 31310 - Taxi Driver 14.96 31361 - Truckdriver Light 17.11 31362 - Truckdriver Medium 19.23 31363 - Truckdriver Heavy 20.80 31364 - Truckdriver Tractor-Trailer 20.80 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 15.69 99030 - Cashier 9.75 99050 - Desk Clerk 10.81 99095 - Embalmer 26.61 99130 - Flight Follower 26.61 99251 - Laboratory Animal Caretaker I 16.23 99252 - Laboratory Animal Caretaker II 17.83 99260 - Marketing Analyst 30.84 99310 - Mortician 26.61 99410 - Pest Controller 21.12 99510 - Photofinishing Worker 13.98 99710 - Recycling Laborer 19.60 99711 - Recycling Specialist 22.94 99730 - Refuse Collector 18.04 99810 - Sales Clerk 11.08 99820 - School Crossing Guard 14.48 99830 - Survey Party Chief 21.65 99831 - Surveying Aide 12.81 99832 - Surveying Technician 17.56 99840 - Vending Machine Attendant 18.42 99841 - Vending Machine Repairer 22.41 99842 - Vending Machine Repairer Helper 18.42
Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.
ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:
HEALTH & WELFARE: $4.60 per hour up to 40 hours per week or $184.00 per week or $797.33 per month
HEALTH & WELFARE EO 13706: $4.23 per hour up to 40 hours per week or $169.20 per week or $733.20 per month*
*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.
VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 8 years and 4 weeks after 20 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)
HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Juneteenth National Independence Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)
THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:
1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.
400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.
Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:
(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;
(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;
(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or
(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).
2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.
If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).
** HAZARDOUS PAY DIFFERENTIAL **
An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.
All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.
A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;
minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.
** UNIFORM ALLOWANCE **
If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:
The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.
** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **
The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.
** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard Form 1444 (SF-1444) **
Conformance Process:
The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e. the work to be performed is not performed by any classification listed in the wage determination) be classified by the contractor so as to provide a reasonable relationship (i.e. appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification wage rate and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.
The process for preparing a conformance request is as follows:
1) When preparing the bid the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).
2) After contract award the contractor prepares a written report listing in order the proposed classification title(s) a Federal grade equivalency (FGE) for each proposed classification(s) job description(s) and rationale for proposed wage rate(s) including information regarding the agreement or disagreement of the authorized representative of the employees involved or where there is no authorized representative the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.
3) The contracting officer reviews the proposed action and promptly submits a report of the action together with the agency's recommendations and pertinent information including the position of the contractor and the employees to the U.S.
Department of Labor Wage and Hour Division for review (See 29 CFR 4.6(b)(2)(ii)).
4) Within 30 days of receipt the Wage and Hour Division approves modifies or disapproves the action via transmittal to the agency contracting officer or notifies the contracting officer that additional time will be required to process the request.
5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.
6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See
29 CFR 4.6(b)(2)(iii)).
Information required by the Regulations must be submitted on SF-1444 or bond paper.
When preparing a conformance request the ""Service Contract Act Directory of Occupations"" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember it is not the job title but the required tasks that determine whether a class is included in an established wage determination.
Conformances may not be used to artificially split combine or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1))."
CLAUSES INCORPORATED BY REFERENCE
52.203-11 Certification And Disclosure Regarding Payments To
Influence Certain Federal Transactions
SEP 2007
52.203-12 Limitation On Payments To Influence Certain Federal Transactions
JUN 2020
52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements
JAN 2017
52.204-7 System for Award Management OCT 2018 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-23 Prohibition on Contracting for Hardware, Software, and
Services Developed or Provided by Kaspersky Lab and Other Covered Entities.
JUL 2018
52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.
OCT 2020
52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.
AUG 2020
52.209-10 Prohibition on Contracting With Inverted Domestic Corporations
NOV 2015
52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law
FEB 2016
52.212-5 (Dev) Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items (Deviation 2018-O0021)
SEP 2021
52.232-40 Providing Accelerated Payments to Small Business Subcontractors
DEC 2013
252.201-7000 Contracting Officer's Representative DEC 1991 252.203-7000 Requirements Relating to Compensation of Former DoD
Officials
SEP 2011
252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7003 Agency Office of the Inspector General AUG 2019 252.203-7005 Representation Relating to Compensation of Former DoD
Officials
NOV 2011
252.204-7004 Antiterrorism Awareness Training for Contractors. FEB 2019 252.204-7008 Compliance With Safeguarding Covered Defense Information
Controls
OCT 2016
252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting
DEC 2019
252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support
MAY 2016
252.204-7016 Covered Defense Telecommunications Equipment or Services -- Representation
DEC 2019
252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services -- Representation
MAY 2021
252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services
JAN 2021
252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements NOV 2020 252.204-7020 NIST SP 800-171 DoD Assessment Requirements NOV 2020 252.204-7021 Contractor Compliance with the Cybersecurity Maturity
Model Certification Level Requirement
NOV 2020
252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7031 Secondary Arab Boycott Of Israel JUN 2005 252.225-7048 Export-Controlled Items JUN 2013 252.225-7050 Disclosure of Ownership or Control by the Government of a
Country that is a State Sponsor of Terrorism
SEP 2021
252.225-7973 (Dev) Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems - Representation (DEVIATION 2020- O0015)
MAY 2020
252.225-7974 (Dev) Representation Regarding Business Operations with the Maduro Regime (DEVIATION 2020-O0005)
FEB 2020
252.232-7003 Electronic Submission of Payment Requests and Receiving Reports
DEC 2018
252.232-7010 Levies on Contract Payments DEC 2006 252.232-7015 Performance-Based Payments--Representation APR 2020 252.232-7016 Notice of Progress Payments or Performance-Based Payments APR 2020 252.237-7010 Prohibition on Interrogation of Detainees by Contractor
Personnel
JUN 2013
252.243-7999 (Dev) Section 3610 Reimbursement. (DEVIATION 2020-O0021) AUG 2020 252.244-7000 Subcontracts for Commercial Items JAN 2021 252.246-7004 Safety of Facilities, Infrastructure, and Equipment for
Military Operations
OCT 2010
252.247-7023 Transportation of Supplies by Sea FEB 2019
CLAUSES INCORPORATED BY FULL TEXT
52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (SEP 2021)
(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the solicitation. However, the small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees if the acquisition--
(1) Is set aside for small business and has a value above the simplified acquisition threshold;
(2) Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or
(3) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.
(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show--
(1) The solicitation number;
(2) The time specified in the solicitation for receipt of offers;
(3) The name, address, and telephone number of the offeror;
(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;
(5) Terms of any express warranty;
(6) Price and any discount terms;
(7) "Remit to" address, if different than mailing address;
(8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);
(9) Acknowledgment of Solicitation Amendments;
(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and
(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.
(c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.
(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during preaward testing.
(e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with subpart 4.10 of the Federal Acquisition Regulation), or alternative commercial items for satisfying the requirements of this solicitation.
Each offer submitted will be evaluated separately.
(f) Late submissions, modifications, revisions, and withdrawals of offers:
(1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due.
(2)(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is “late” and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and--
(A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or
(B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or
(C) If this solicitation is a request for proposals, it was the only proposal received.
(ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.
(3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.
(4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.
(5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers.
Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer.
(g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror's initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.
(h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer.
(i) Availability of requirements documents cited in the solicitation.
(1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to--GSA Federal Supply Service Specifications Section, Suite 8100, 470 East L'Enfant Plaza, SW, Washington, DC 20407, Telephone (202) 619-8925, Facsimile (202) 619-8978.
(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision.
Additional copies will be issued for a fee.
(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:
(i) ASSIST (https://assist.dla.mil/online/start/).
(ii) Quick Search (http://quicksearch.dla.mil/).
(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by--
(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);
(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or
(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone
(215) 697-2667/2179, Facsimile (215) 697-1462.
(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.
(j) Unique entity identifier. (Applies to all offers that exceed the micro-purchase threshold, and offers at or below the micro-purchase threshold if the solicitation requires the Contractor to be registered in the System for Award Management (SAM).) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .