RFP 1175 WHGC Bunker Renovation and Tee Expansion Plan 18July26.pdf
PDF 1 MB Posted
- Solicitation number
- RFP 1175
- Issued by
- Hartford County, Connecticut
About this file
This is a Request for Proposals (RFP) document for the Town of Bloomfield, Connecticut, pertaining to bunker, green, and tee renovations at Wintonbury Hills Golf Course. The project encompasses reconstruction and renovation of existing sand bunkers through reshaping, drainage improvements, installation of Capillary Flow and JM Evalith bunker liners, and bunker sand installation; construction of new bunkers; renovation of the putting green on Hole #16; construction and expansion of selected tees including new back tees on Holes #15 and #18 (adding 80 yards and 25 yards, respectively); associated grading, drainage, and irrigation adjustments; tree clearing on Hole #15; and seedbed preparation with grassing and sodding. The Bunker Renovation Plan details specific modifications across all 18 holes, with total existing bunker area of 20,450 square feet, new bunker area of 3,750 square feet, and removed bunker area of 4,770 square feet. Proposals must be received prior to 1:00 p.m. on Thursday, November 5, 2026, at Town Hall, 800 Bloomfield Avenue, Bloomfield, Connecticut. Questions may be submitted until 4:00 p.m. on October 19, 2026.
The RFP document does not specify pricing terms, set-asides, incumbent contractor information, funding sources, or contract award and performance dates. The document focuses primarily on the technical scope and specifications for the renovation work as depicted in the bunker renovation plan and associated technical specifications, which are referenced but not fully detailed in the provided file.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
100'
GENERAL COMMENT:
Maintain Smaller Bunker Size, But Expand To Recapture Original Bunker Area That Has Been Lost Over Time
Relocate Bunker Towards Center Of Fairway
Remove Bunker (typical)
Re-shape Leading Edge Of Bunker To Improve Visibility From Tees
Re-shape & Increase Bunker Size Slightly
Expand Bunker; Lower Back Edge To Afford Advancing Ball Toward Green
Add (2) Bunkers To Pinch Fairway For Longer Hitters To Add Strategy To The Hole
Add Support To Flash Back Sand Line Higher For Visibility From Tee
Lower Back Edge Of Bunker
Make Bigger & Flash Higher For Visibility
Re-shape
Remove Bunker:
Penalizes The High Handicaps
Remove Bunkers
Enlarge & Re-shape
Construct New Bunker
Re-shape
Remove Bunkers
Re-shape & Expand All (4) To Original Size
Remove Bunkers
Bunker Not Needed For Strategy, But Could Remain For Visual Effect
Remove Bunker & Lower Area By (3') & Create Low Mounds
Lower Bunker & Re-shape
Lower, Enlarge, & Re-shape
(2) Practice Bunkers
Re-shape Bunker
Re-shape Into A Single Bunker
Re-shape Bunker
Remove Front 23 Of Bunker & Construct Pot Bunker For Visual Effect
Lower Back Edge & Re-shape Bunker
Remove Right 23 & Re-shape Slope & Bunker
Raise Right Side Of Green To Create Pinnable Surface
(3,400 SF)
Slightly Re-shape Bunker To Minimize Green Drainage Run-off From Entering The Bunker
Expand Bunker Into The Slope Coming Off The Green
Add Support To Flash Back Edge Sand Line Higher For Visibility From Fairway
Re-shape Bunkers In Place (4)
Remove Bunker (typical)
Re-shape Re-shape & Enlarge Slightly
Re-shape Bunkers (3)
WINTONBURY HILLS GOLF COURSE
Bunker Renovation Plan
July 18, 2026
N O
R T
H
RENOVATION QUANTITIES
Total Existing Bunker Area: 20,450 SF Total New Bunker Area: 3,750 SF Total Removed Bunker Area: 4,770 SF
330 275
205205
170230
395340
215 385
1,320
330 130
As Fill Material Becomes Available, Add Low Support Mounding In Rough
Re-construct & Enlarge Bunker
Add New Back Tee On #15 (+ 80 Yards)
Add New Back Tee On #18 (+ 25 Yards)
Remove Bunker
Lower Mound To Match Adjacent Shaping
| Sheets and Views |
| Model |
File details come from the government source that posted it. Updated .