QP 11-1-9771-1 T-11R SP Extractor Assembly 17 Nov 2022.pdf
PDF 97 KB Posted
- Solicitation number
- W56HZV23R0115
About this file
This document outlines quality assurance provisions for an extractor assembly component to be procured by the Department of the Army Materiel Command. Inspections will include a first article review examining materials, construction, and dimensions to ensure conformance with specifications. Production lots will be sampled according to ANSI/ASQ Z1.4 at an S-3 inspection level and AQL of 1.0, with any sample unit containing one major defect or more than one minor defect deemed nonconforming. Defect classifications will follow MIL-STD-849 or be specified by the procuring activity. This component is related to solicitation W56HZV23R0115 for T-11 reserve spares including four national stock numbers, issued by the TACOM Life Cycle Management Command.
View the file
Other files
Show all 19
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
17 Nov 2022
Quality Assurance Provisions For
Extractor Assembly, T-11R Single Pin
MIL-DTL-6645
P/N 11-1-9771-1
1. First Article.
1.1 Inspection. Inspect in accordance with the First Article requirements of paragraph 6.2, subparagraph (d.) of MIL-DTL-6645. These requirements include a component and material inspection, in-process inspection, examination of the item to ensure conformance to the visual, construction, manufacturing and dimensional requirements of 11-1-9771, its associated drawings and specifications.
1.2 Acceptance/Rejection. Any defect, nonconformance or test failure shall be cause for rejection of the First Article.
2. Conformance/Lot Inspection.
2.1 Sampling. Sampling for the inspection shall be performed in accordance with ANSI/ASQ Z1.4. The lot size shall be expressed in units of extractor assemblies. The sample unit shall be one extractor assembly. The Inspection Level shall be S-3. The Acceptable Quality Limit (AQL) shall be 1.0.
2.2 Inspection. Inspect in accordance with conformance inspection requirements of paragraph 4.4 of MIL-DTL-6645 including material, visual, and dimensional examinations as specified in 11-1-9771 and Table VII of MIL-STD-849.
2.3 Acceptance/Rejection. Any sample unit having one major defect or more than one minor defect shall be considered a nonconforming unit. Major and minor defects are classified in Table VII of MIL-STD-849.
3. Classification of Defects. Classification of nonconformities/defects not specified in MIL-STD-849 for the FAI and Conformance Inspections shall be specified by the procuring activity.
DISTRIBUTION STATEMENT A
THIS DOCUMENT IS APPROVED FOR PUBLIC RELEASE, DISTRIBUTION IS UNLIMITED.
File details come from the government source that posted it. Updated .