QP 11-1-10008-1 T-11R SP Ejector Spring 4 Jan 2023.pdf
PDF 78 KB Posted
- Solicitation number
- W56HZV23R0115
About this file
This document outlines quality assurance provisions for the production of ejector spring assemblies under federal contract number W56HZV23R0115. The contractor must perform a First Article Inspection, including material, process and dimensional inspections, to verify conformance to drawings and specifications. Production lots will be sampled according to ANSI/ASQ Z1.4 at S-3 inspection level and 1.0 AQL, with inspections of material, visual characteristics, and dimensions as defined in the technical data package. Any sample unit with one major defect or more than one minor defect will be considered nonconforming. The Army Contracting Command is soliciting these ejector spring assemblies to replenish reserve spares for four national stock numbers under the contract.
View the file
Other files
Show all 19
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
January 4, 2023
Quality Assurance Provisions For
Ejector Spring Assembly, T-11R SP
MIL-DTL-6645
P/N 11-1-10008-1
1. First Article.
1.1 Inspection. Inspect in accordance with the First Article requirements of paragraph 6.2, subparagraph (d.) of MIL-DTL-6645. These requirements include a component and material inspection, in-process inspection, examination of the item to ensure conformance to the visual, construction, manufacturing and dimensional requirements of 11-1-10008, its associated drawings and specifications.
1.2 Acceptance/Rejection. Any defect, nonconformance or test failure shall be cause for rejection of the First Article.
2. Conformance/Lot Inspection.
2.1 Sampling. Sampling for the inspection shall be performed in accordance with ANSI/ASQ Z1.4. The lot size shall be expressed in units of ejector spring assemblies. The sample unit shall be one ejector spring assembly. The Inspection Level shall be S-3. The Acceptable Quality Limit (AQL) shall be 1.0.
2.2 Inspection. Inspect in accordance with conformance inspection requirements of paragraph 4.4 of MIL-DTL-6645 including material, visual, and dimensional examinations as specified in 11-1-10008 and Table VII of MIL-STD-849.
2.3 Acceptance/Rejection. Any sample unit having one major defect or more than one minor defect shall be considered a nonconforming unit. Major and minor defects are classified in Table VII of MIL-STD-849.
3. Classification of Defects. Classification of nonconformities/defects not specified in MIL-STD-849 for the FAI and Conformance Inspections shall be specified by the procuring activity.
File details come from the government source that posted it. Updated .