QP 11-1-9606-1 T-11R SP Ripcord 21 Nov 2022.pdf
PDF 78 KB Posted
- Solicitation number
- W56HZV23R0115
About this file
This document outlines quality assurance provisions for the production of Reserve Ripcord Assemblies, T-11R Single Pin under part number 11-1-9606-1. Inspections will include a First Article component and material inspection, in-process examination, and conformity checks for visual and dimensional requirements. Lot sampling will follow ANSI/ASQ Z1.4 at an S-3 Inspection Level with one assembly as the sample unit, inspecting for material, visual and dimensional specifications. Any sample unit with one major defect or more than two minor defects will constitute a nonconforming unit. The related federal contract solicitation is for T-11 Reserve Spares including QPL Items NSN: 1670-01-696-3468, 1670-01-696-3150, 1670-01-696-3467, and 1670-01-696-3640 through the Department of the Army Materiel Command TACOM Life Cycle Management Command.
View the file
Other files
Show all 19
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
21 Nov 2022
Quality Assurance Provisions For
Reserve Ripcord Assembly, T-11R Single Pin
MIL-DTL-6645
P/N 11-1-9606-1
1. First Article.
1.1 Inspection. Inspect in accordance with the First Article requirements of paragraph 6.2, subparagraph (d.) of MIL-DTL-6645. These requirements include a component and material inspection, in-process inspection, examination of the assembly to ensure conform to the visual and dimensional requirements of 11-1- 9606 and associated drawings.
1.2 Acceptance/Rejection. Any defect or nonconformance shall be cause for rejection of the First Article.
2. Conformance/Lot Inspection.
2.1 Sampling. Sampling for the inspection shall be performed IAW ANSI/ASQ Z1.4. The lot size shall be expressed in units of ripcord assemblies. The Inspection Level shall be S-3. The sample unit shall be one ripcord assembly.
2.2 Inspection. Inspect accordance with conformance inspection requirements of paragraph 4.4 of MIL-DTL-6645 including material, visual and dimensional examinations as specified in 11-1-9606 and Table VII of MIL-STD-849.
2.3 Acceptance/Rejection. Any sample unit having one major defect or more than two minor defects shall considered a nonconforming unit. Major and minor defects are classified in Table VII of MIL-STD-849. The Acceptable Quality Limit (AQL) shall be 1.0.
3. Classification of Defects. Classification of nonconformities/defects not specified in MIL-STD-849 for the FAI and Conformance Inspections shall be specified by the procuring activity.
File details come from the government source that posted it. Updated .