Amendment 008.docx

DOCX document 105 KB Posted

Attached to
Electric Passenger Cars and Cargo Vans, to include Electric - Extended Range Vehicles
Solicitation number
QMAA-JC-100001-N
Issued by

About this file

Amendment 008

View the file

Other files

File Type Posted
Amendment 010.docx DOCX document
Amendment 009.docx DOCX document
Attachment 1-1L Changes to Federal Standard 307AP Electric Veh.pdf PDF
Attachment 1-1K Changes to Federal Standard 122BC Electric Veh.pdf PDF
Amendment 007.docx DOCX document
SOLICITATION QUESTIONS AND ANSWERS 1105.docx DOCX document
Amendment 006.docx DOCX document
Amendment 005.docx DOCX document
Amendment 004.docx DOCX document
Amendment 003.docx DOCX document
Questions and Answers Solicitation QMAA-JC-100001-N.docx DOCX document
Questions Answers QMAA-JC-100001-N.docx DOCX document
Amendment 002.docx DOCX document
AMENDMENT 001 - 1-1AA ELECTRIC VEHICLE SOLICITATION.docx DOCX document
1-1G Attachment G - Fed Std 307AP.pdf PDF
1-1E Attachment E - AutoChoice Online Ordering Instructions.docx DOCX document
1-1C Attachment C- Proposal Checklist.docx DOCX document
1-1J ATTACHMENT J - 1449 FORM.pdf PDF
1-1F Attachment F - Fed Std 122BC.pdf PDF
1-1D Attachment D -Exceptions Spreadsheet.xlsx XLSX spreadsheet
1-1H Attachment H - Dealers Layout.xlsx XLSX spreadsheet
1-1A ELECTRIC VEHICLE SOLICITATION.docx DOCX document
1- 1B Attachment B - Model Subcontracting Plan.docx DOCX document
Show all 23

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE
PAGE OF PAGES
1
9

2. AMENDMENT/MODIFICATION NO.

AMENDMENT 008

3. EFFECTIVE DATE

02/16/2011

4. REQUISITION/PURCHASE REQ. NO.

5. PROJECT NO. (IF APPLICABLE)

6. Issued By
Code
7. ADMINISTERED BY (If other than Item 6)
Code

U.S. GENERAL SERVICES ADMINISTRATION

AUTOMOTIVE ACQUISITION SUPPORT DIVISION (QMAA)

2200 CRYSTAL DRIVE, SUITE 1006

ARLINGTON, VA, 22202

8. Name and Address of Contractor (No., street, county, State and ZIP Code)

9A. AMENDMENT OF SOLICITATION NO.

QMAA-JC-100001-N

X
9B. DATED (SEE ITEM 11)

SEPTEMBER 23, 2010

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE
FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X
The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers
is extended
X
is not extended.

Offer's must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning ___1____copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF : FAR 43.103(b) CHANGE CLAUSE

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor

is not,
x
is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The above referenced solicitation for Electric Passenger Cars, Cargo Vans, to include Electric-Electric Extended range Vehicles is hereby amended and shown on the attached page.

All other terms and conditions remain the same, except as indicated below:

(NOTE: By signing this amendment, Offeror has agreed to and incorporated by reference all the changes into the solicitation) Except as provided herein, all terms and conditions of the document referenced in 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)
16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)
15B. CONTRACTOR/OFFEROR
15C. DATE SIGNED
16B. UNITED STATES OF AMERICA
16C. DATE SIGNED

BY ______________________________________________

(Signature of person authorized to sign)

(Signature of Contracting Officer)

1. SECTION A – GENERAL

The following NAICS codes will also be considered under solicitation QMAA-JC-100001-N:

336112 Light Truck and Utility Vehicle Manufacturing 441110 New Car Dealers

2. SECTION C – ADDITIONAL REQUIREMENTS

The language in Section C.17 ADDENDUM TO SOLICITATION is hereby changed;

FROM:

C.17 ADDENDUM TO THE SOLICITATION

The following attachments are included:

Attachment No.
Description
A
Schedule of Items (see Section B5)
B
Small Business Subcontracting Plan
C
Proposal Checklist
D
Exceptions Spreadsheet
E
AutoChoice Online Ordering Procedures
F
Federal Standard 122BC
G
Federal Standard 307AP
H
Dealer’s Layout
I
Option Analysis Report
J
Form 1449

TO:

C.17 ADDENDUM TO THE SOLICITATION

The following attachments are included:

Attachment No.
Description
A
Schedule of Items (see Section B5)
B
Small Business Subcontracting Plan
C
Proposal Checklist
D
Exceptions Spreadsheet
E
AutoChoice Online Ordering Procedures
F
Federal Standard 122BC
G
Federal Standard 307AP
H
Dealer’s Layout
I
Option Analysis Report
J
Form 1449

K Changes to Federal Standard 122BC – Electric Vehicles

L Changes to Federal Standard 307AP – Electric Vehicles

1. Section D - CONTRACT CLAUSES AND PROVISIONS

The language included in section D.6 – 52.216-22 INDEFINITE QUANTITY is hereby changed:

FROM:

D.6 52.216-22 INDEFINITE QUANTITY (OCT 1995)

(a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract.

(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum." The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum."

(c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.

(d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after 09/30/2010.

TO:

D.6 52.216-22 INDEFINITE QUANTITY (OCT 1995)

(a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract.

(b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the "maximum." The Government shall order at least the quantity of supplies or services designated in the Schedule as the "minimum."

(c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations.

(d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after 09/30/2011.

The language included in section D.15 - TIME OF SHIPMENT is hereby changed:

FROM:

D.15 552.211-81 TIME OF SHIPMENT (FEB 1996) (ALTERNATE I—FEB 1996)

(a) Shipment is required within 90 calendar days after receipt of order.

(b) Each delivery order will specify that shipment is required no later than the number of days shown above. If such order also states that "Early Shipment is Precluded," the Contractor agrees to make shipment no sooner than 90 calendar days after receipt of order. Earlier shipments may result in non-acceptance of the supplies at the delivery point at the time of arrival.

TO:

D.15 552.211-81 TIME OF SHIPMENT (FEB 1996) (ALTERNATE I—FEB 1996)

(a) Shipment is required within 180 calendar days after receipt of order.

(b) Each delivery order will specify that shipment is required no later than the number of days shown above. If such order also states that "Early Shipment is Precluded," the Contractor agrees to make shipment no sooner than 180 calendar days after receipt of order. Earlier shipments may result in non-acceptance of the supplies at the delivery point at the time of arrival.

2. SECTION E - INSTRUCIONS TO OFFERORS

Section E is hereby changed to include the following clauses in their entirety:

52.225-5 Trade Agreements.

As prescribed in 25.1101(c)(1), insert the following clause:

Trade Agreements (Aug 2009)

(a) Definitions. As used in this clause— “Caribbean Basin country end product”—

(1) Means an article that— (i)(A) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or

(B) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed; and

(ii) Is not excluded from duty-free treatment for Caribbean countries under 19 U.S.C. 2703(b).

(A) For this reason, the following articles are not Caribbean Basin country end products:

(1) Tuna, prepared or preserved in any manner in airtight containers;

(2) Petroleum, or any product derived from petroleum;

(3) Watches and watch parts (including cases, bracelets, and straps) of whatever type including, but not limited to, mechanical, quartz digital, or quartz analog, if such watches or watch parts contain any material that is the product of any country to which the Harmonized Tariff Schedule of the United States (HTSUS) column 2 rates of duty apply (i.e., Afghanistan, Cuba, Laos, North Korea, and Vietnam); and

(4) Certain of the following: textiles and apparel articles; footwear, handbags, luggage, flat goods, work gloves, and leather wearing apparel; or handloomed, handmade, and folklore articles;

(B) Access to the HTSUS to determine duty-free status of articles of these types is available at http://www.usitc.gov/tata/hts/. In particular, see the following:

(1) General Note 3(c), Products Eligible for Special Tariff treatment.

(2) General Note 17, Products of Countries Designated as Beneficiary Countries under the United States-Caribbean Basin Trade Partnership Act of 2000.

(3) Section XXII, Chapter 98, Subchapter II, Articles Exported and Returned, Advanced or Improved Abroad, U.S. Note 7(b).

(4) Section XXII, Chapter 98, Subchapter XX, Goods Eligible for Special Tariff Benefits under the United States-Caribbean Basin Trade Partnership Act; and

(2) Refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the acquisition, includes services (except transportation services) incidental to the article, provided that the value of those incidental services does not exceed that of the article itself.

“Designated country” means any of the following countries:

(1) A World Trade Organization Government Procurement Agreement country (Aruba, Austria, Belgium, Bulgaria, Canada, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen and Matsu (Chinese Taipei))”, or United Kingdom);

(2) A Free Trade Agreement country (Australia, Bahrain, Canada, Chile, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Mexico, Morocco, Nicaragua, Oman, Peru, or Singapore);

(3) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, East Timor, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Maldives, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, Tanzania, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or

(4) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, British Virgin Islands, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Netherlands Antilles, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, or Trinidad and Tobago).

“Designated country end product” means a WTO GPA country end product, an FTA country end product, a least developed country end product, or a Caribbean Basin country end product.

“End product” means those articles, materials, and supplies to be acquired under the contract for public use.

“Free Trade Agreement country end product” means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement (FTA) country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an FTA country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to the article, provided that the value of those incidental services does not exceed that of the article itself.

“Least developed country end product” means an article that—

(1) Is wholly the growth, product, or manufacture of a least developed country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to the article, provided that the value of those incidental services does not exceed that of the article itself.

“United States” means the 50 States, the District of Columbia, and outlying areas.

“U.S.-made end product” means an article that is mined, produced, or manufactured in the United States or that is substantially transformed in the United States into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed.

“WTO GPA country end product” means an article that—

(1) Is wholly the growth, product, or manufacture of a WTO GPA country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services, (except transportation services) incidental to the article, provided that the value of those incidental services does not exceed that of the article itself.

(b) Delivery of end products. The Contracting Officer has determined that the WTO GPA and FTAs apply to this acquisition. Unless otherwise specified, these trade agreements apply to all items in the Schedule. The Contractor shall deliver under this contract only U.S.-made or designated country end products except to the extent that, in its offer, it specified delivery of other end products in the provision entitled “Trade Agreements Certificate.”

52.246-2 Inspection of Supplies—Fixed-Price.

As prescribed in 46.302, insert the following clause:

Inspection of Supplies—Fixed-Price (Aug 1996)

(a) Definition. “Supplies,” as used in this clause, includes but is not limited to raw materials, components, intermediate assemblies, end products, and lots of supplies.

(b) The Contractor shall provide and maintain an inspection system acceptable to the Government covering supplies under this contract and shall tender to the Government for acceptance only supplies that have been inspected in accordance with the inspection system and have been found by the Contractor to be in conformity with contract requirements. As part of the system, the Contractor shall prepare records evidencing all inspections made under the system and the outcome. These records shall be kept complete and made available to the Government during contract performance and for as long afterwards as the contract requires. The Government may perform reviews and evaluations as reasonably necessary to ascertain compliance with this paragraph. These reviews and evaluations shall be conducted in a manner that will not unduly delay the contract work. The right of review, whether exercised or not, does not relieve the Contractor of the obligations under the contract.

(c) The Government has the right to inspect and test all supplies called for by the contract, to the extent practicable, at all places and times, including the period of manufacture, and in any event before acceptance. The Government shall perform inspections and tests in a manner that will not unduly delay the work. The Government assumes no contractual obligation to perform any inspection and test for the benefit of the Contractor unless specifically set forth elsewhere in this contract.

(d) If the Government performs inspection or test on the premises of the Contractor or a subcontractor, the Contractor shall furnish, and shall require subcontractors to furnish, at no increase in contract price, all reasonable facilities and assistance for the safe and convenient performance of these duties. Except as otherwise provided in the contract, the Government shall bear the expense of Government inspections or tests made at other than the Contractor’s or subcontractor’s premises; provided, that in case of rejection, the Government shall not be liable for any reduction in the value of inspection or test samples.

(e)(1) When supplies are not ready at the time specified by the Contractor for inspection or test, the Contracting Officer may charge to the Contractor the additional cost of inspection or test.

(2) The Contracting Officer may also charge the Contractor for any additional cost of inspection or test when prior rejection makes reinspection or retest necessary.

(f) The Government has the right either to reject or to require correction of nonconforming supplies. Supplies are nonconforming when they are defective in material or workmanship or are otherwise not in conformity with contract requirements. The Government may reject nonconforming supplies with or without disposition instructions.

(g) The Contractor shall remove supplies rejected or required to be corrected. However, the Contracting Officer may require or permit correction in place, promptly after notice, by and at the expense of the Contractor. The Contractor shall not tender for acceptance corrected or rejected supplies without disclosing the former rejection or requirement for correction, and, when required, shall disclose the corrective action taken.

(h) If the Contractor fails to promptly remove, replace, or correct rejected supplies that are required to be removed or to be replaced or corrected, the Government may either (1) by contract or otherwise, remove, replace, or correct the supplies and charge the cost to the Contractor or (2) terminate the contract for default. Unless the Contractor corrects or replaces the supplies within the delivery schedule, the Contracting Officer may require their delivery and make an equitable price reduction. Failure to agree to a price reduction shall be a dispute.

(i)(1) If this contract provides for the performance of Government quality assurance at source, and if requested by the Government, the Contractor shall furnish advance notification of the time—

(i) When Contractor inspection or tests will be performed in accordance with the terms and conditions of the contract; and

(ii) When the supplies will be ready for Government inspection.

(2) The Government’s request shall specify the period and method of the advance notification and the Government representative to whom it shall be furnished. Requests shall not require more than 2 workdays of advance notification if the Government representative is in residence in the Contractor’s plant, nor more than 7 workdays in other instances.

(j) The Government shall accept or reject supplies as promptly as practicable after delivery, unless otherwise provided in the contract. Government failure to inspect and accept or reject the supplies shall not relieve the Contractor from responsibility, nor impose liability on the Government, for nonconforming supplies.

(k) Inspections and tests by the Government do not relieve the Contractor of responsibility for defects or other failures to meet contract requirements discovered before acceptance. Acceptance shall be conclusive, except for latent defects, fraud, gross mistakes amounting to fraud, or as otherwise provided in the contract.

(l) If acceptance is not conclusive for any of the reasons in paragraph (k) hereof, the Government, in addition to any other rights and remedies provided by law, or under other provisions of this contract, shall have the right to require the Contractor (1) at no increase in contract price, to correct or replace the defective or nonconforming supplies at the original point of delivery or at the Contractor’s plant at the Contracting Officer’s election, and in accordance with a reasonable delivery schedule as may be agreed upon between the Contractor and the Contracting Officer; provided, that the Contracting Officer may require a reduction in contract price if the Contractor fails to meet such delivery schedule, or (2) within a reasonable time after receipt by the Contractor of notice of defects or nonconformance, to repay such portion of the contract as is equitable under the circumstances if the Contracting Officer elects not to require correction or replacement. When supplies are returned to the Contractor, the Contractor shall bear the transportation cost from the original point of delivery to the Contractor’s plant and return to the original point when that point is not the Contractor’s plant. If the Contractor fails to perform or act as required in paragraph (l)(1) or (l)(2) of this clause and does not cure such failure within a period of 10 days (or such longer period as the Contracting Officer may authorize in writing) after receipt of notice from the Contracting Officer specifying such failure, the Government shall have the right by contract or otherwise to replace or correct such supplies and charge to the Contractor the cost occasioned the Government thereby.

image2.emf

Attachment 1-1L Changes to Federal Standard 307AP Electric Veh.pdf

Changes to Federal Standard 307AP

Electric Vehicles Revised 7 Dec 2010

Item 30E

Delete the existing verbiage and replace with the following:

The compact cargo van specified, shall be a plug in electric vehicle (EV), enclosed all-steel unitized, or on-frame constructed, integral body and cab.

The electric vehicle features include the following:

Top speed of 70 MPH

80 mile range on one full battery charge (chargeable from 120 or 240volt outlet-6 to 8 hours with 240 volt or 20 to 24 hours with 120 volt charging outlet)

The following features are NOT included:

Spare tire

Charging station

NOTE: The contractor shall be fully responsible for the bumper to bumper warranty of this completed vehicle including, but not limited to, the chassis, drive-train, all modifications.

Changes to the minimums:

RSC is a minimum requirement

GVWR is reduced to 5000

SAIB is changed to Head & Side Impact Airbags

STA is deleted

BDSZ is changed to 170-190

WB is reduced to 112

RRDR is changed to hinged

DRL is a minimum requirement

CR is a minimum requirement

Changes to the Features:

PAY is reduced to 1000

Item 134E

Delete the existing verbiage and replace with the following:

This forward-control, walk-in style vehicle shall have an integral driver's compartment and enclosed body and as specified. The standard commercial delivery van specified shall utilize a current model year chassis with all electric drive. This is an all electric truck with estimated range of 50-75 miles. The drive train is configured with a liquid cooled brushless motor and a Lithium Battery Pack.

There is an on-board 220V battery charger as a minimum.

The contractor is fully responsible for the bumper to bumper warranty of this completed vehicle including, but not limited to, the chassis, drive-train, fuel system and all modifications.

The requirements listed below shall be the minimum furnished on this vehicle:

1. The body shall be constructed of sheet aluminum or magnesium alloys of equal strength minimum 0.100 in side panels and with an aluminum frame or molded fiberglass.

2. The roof shall be supported by 4integral longitudinal ribsand metal roof reinforcements which are bonded in place on 24 in spacing front to rear.

3. The nose section of body and interior engine cover may be of composite construction. This shall provide access for all operator required engine and drive train service and maintenance.

4. Upholstered high back driver and assistant seats set on tilt pedestals shall be provided. Seats shall be adjustable fore, aft and for height, with positive locking device to secure seat in place when in use. Both seats shall be provided with3 point safety belts.

5. The cab compartment shall be furnished with a minimum 10,000 BTU rated heater.

6. Dome lights shall be provided: one in the driver's compartment and two in the cargo compartment, equally spaced.

7. Dual adjustable combination (flat and convex) swing away mirrors shall be furnished.

9. Side door steps shall be provided at both front entrances, and shall have a tread plate surface.

10. Body shall have sliding type front doors. The door operating handles shall be capable of serving as door opening/closing handles, or door grab handles shall be provided.

11. All doors shall be furnished with cylinder type locks for the same key, with unlike keys on vehicles to the same destination.

12. Sliding windows with not less than 360 sq in of clear glass shallbe provided in the front doors. All door windows shall be safety glass mounted in molded rubber (or equal) in the upper section of the doors. Windows shall be weather tight.

13. Rear door clear opening shall be a minimum of 35 in wide and 65 in high. Rear doors shall have anR38 door check with a 3 inch extension to hold door in full open position. Grab handle shall be provided on inside of rear door, in addition to door latch operating handle, to assist in closing door(s).

14. A full width, minimum7 inch deep safety-tread steel step shall be furnished.

15. The spare tire carrier shall be located in the cargo area directly behind the bulkhead on the driver’s sidewall.

16. Not less than five full width cross members (including end sills) shall be furnished. Stub cross members, as required at wheel housing to provide required strength, shall be furnished. Flooring with integrally formed cross members meets these requirements.

17. Roof shall be one piece center section with caps at the front, rear and sides, not less than 0.032 in thick aluminum or molded fiberglass. All body seams and joints shall be dust and weather sealed.

18. Cargo area floor shall be all aluminum ribbed floor planks. The cargo floor shall be not less than 0.125 in. The driver's area and steps shall be not less than 18gage

(0.0478 in).

19. Floor and support members shall sustain an evenly distributed load of 125 lb per sq ft of floor area. Alternate floor construction shall be of extruded aluminum, dryfreight construction with strength at least equal to that of steel.

White is the standard color for this item. If a color other than white is desired, option

"BPC" Body Paint Color must be ordered. Ordering option BPC requires that a color be chosen from the "Quantity and Color Selections" page in AUTOCHOICE.

Body Load Length, ft: 12

Body Load Height:, ft: 6

Body Interior Capacity Min, ft3: 550

Cargo Door Type: Center Panel Doors

Changes to the minimums:

WB is reduced to 135

HP is reduced to 100 hp/70 kw

TORQ is reduced to 200

Changes to the Features:

PAY is reduced to 4000 image1.emf

Attachment 1-1K Changes to Federal Standard 122BC Electric Veh.pdf

Changes to Federal Standard 122BC

Electric Vehicles 7 Dec 2010

Item 7E COUP, MINICOMPACT, ELECTRIC VEHICLE

Changes and instructions to the GSA minimums:

A. Deleted GSA minimum values for COBB, CW, EV, HP, PVOL and WB. Offeror to enter actual values. For COBB Onboard Charger: enter voltage, Amps and phase requirements.

B. Offeror to enter comply for EV.

C. Added minimums BATY, RNGE, CHGE, POWR and TQE for the battery drive system. Offeror to enter values.

Options:

A. Added Option NAV.

Item 8E SEDAN, SUBCOMPACT, ELECTRIC VEHICLE

A. Deleted GSA minimum values for WB and PVOL. Offeror to enter actual values.

B. MF Floor Mats – Deleted minimum requirement.

C. Added minimums BATY, RNGE, CHGE, POWR and TQE for the battery drive

Item 9E SEDAN, COMPACT, ELECTRIC VEHICLE

A. Added minimums BATY, RNGE, CHGE, POWR and TQE for the battery drive

File details come from the government source that posted it. Updated .