Amendment 007.docx
DOCX document 456 KB Posted
- Solicitation number
- QMAA-JC-100001-N
- Issued by
-
GSA Federal Acquisition Service
About this file
Amendment 007
View the file
Other files
Show all 23
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT
| 1. CONTRACT ID CODE |
| PAGE OF PAGES |
| 1 |
| 10 |
2. AMENDMENT/MODIFICATION NO.
AMENDMENT 007
3. EFFECTIVE DATE
11/15/2010
4. REQUISITION/PURCHASE REQ. NO.
5. PROJECT NO. (IF APPLICABLE)
| 6. Issued By |
| Code |
| 7. ADMINISTERED BY (If other than Item 6) |
| Code |
U.S. GENERAL SERVICES ADMINISTRATION
AUTOMOTIVE ACQUISITION SUPPORT DIVISION (QMAA)
2200 CRYSTAL DRIVE, SUITE 1006
ARLINGTON, VA, 22202
8. Name and Address of Contractor (No., street, county, State and ZIP Code)
9A. AMENDMENT OF SOLICITATION NO.
QMAA-JC-100001-N
| X |
| 9B. DATED (SEE ITEM 11) |
SEPTEMBER 23, 2010
10A. MODIFICATION OF CONTRACT/ORDER NO.
10B. DATED (SEE ITEM 13)
| CODE |
| FACILITY CODE |
11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS
| X |
| The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers |
| X |
| is extended |
is not extended.
Offer's must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:
(a) By completing Items 8 and 15, and returning ___1____copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.
12. ACCOUNTING AND APPROPRIATION DATA (If required)
13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,
IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.
A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.
B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).
C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF : FAR 43.103(b) CHANGE CLAUSE
D. OTHER (Specify type of modification and authority)
E. IMPORTANT: Contractor
| is not, |
| x |
| is required to sign this document and return copies to the issuing office. |
14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)
The above referenced solicitation for Electric Passenger Cars, Cargo Vans, to include Electric-Electric Extended range Vehicles is hereby amended and shown on the attached page.
All other terms and conditions remain the same, except as indicated below:
(NOTE: By signing this amendment, Offeror has agreed to and incorporated by reference all the changes into the solicitation) Except as provided herein, all terms and conditions of the document referenced in 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.
| 15A. NAME AND TITLE OF SIGNER (Type or print) |
| 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print) |
| 15B. CONTRACTOR/OFFEROR |
| 15C. DATE SIGNED |
| 16B. UNITED STATES OF AMERICA |
| 16C. DATE SIGNED |
BY ______________________________________________
(Signature of person authorized to sign)
(Signature of Contracting Officer)
1. SECTION A – GENERAL
The language in Section A.1 - ADDITIONAL INFORMATION FOR STANDARD FORM 1449 is hereby changed;
FROM:
Hard Copy Technical and Price Proposals are due October 21, 2010 at 2:30 p.m. Eastern Time. AutoBid pricing is due October 20, 2010 at 5:00p.m. Eastern Time.
TO:
This is a standing solicitation through August 31, 2011.
Offers may be submitted at any time to the address shown in Section A.1. In order to be considered for the first placement of vehicle orders, hard copy Technical and Price Proposals must be submitted by November 16, 2010 at 2:30 p.m. Eastern Standard Time, and AutoBid pricing must be entered by November 15, 2010 at 5:00 p.m. Eastern Standard Time. Only those responsible, responsive offerors that have submitted bids by the noted date and time will be eligible for the first round of order placement.
Any proposals received after the November 2010 closing dates and times will be reviewed and evaluated based on the following schedule: January 13, 2011; March 14, 2011; May 10, 2011, and August 31, 2011. If proposals are found acceptable, award will be made shortly thereafter.
AutoBid will not be open during this period.
Those Offerors planning to submit a proposal after the November 2010 closing dates and times are to submit in both a written paper format utilizing the documents included in the solicitation, and a CD sent to the following address:
U.S. General Services Administration Vehicle Acquisition Support Division 2200 Crystal Drive Suite 1000 Arlington, VA 22202 Attention: Laurel Weiskopf
2. SECTION A.2 – A-FSS-2-A (OCT 1988)
The language describing the Period of Performance is hereby changed;
FROM:
PERIOD: Base – November 1, 2010 through August 31, 2011 Option 1 – September 1, 2011 through August 31, 2012 Option 2 – September 1, 2012 through August 31, 2013 Option 3 – September 1, 2013 through August 31, 2014
TO:
PERIOD: Base – Date of Award through August 31, 2011 Option 1 – September 1, 2011 through August 31, 2012 Option 2 – September 1, 2012 through August 31, 2013 Option 3 – September 1, 2013 through August 31, 2014
3. SECTION B.5 - SCHEDULE OF ITEMS
The schedule of items is changed;
FROM:
The schedule of items can be found in Attachments A1- A5 as follows:
Attachment No. Description
| A1 |
| Schedule of Items – Item #7E Coupe, MiniCompact, 2 Passenger, 2 Door, Electric |
| A2 |
| Schedule of Items – Item #8E Sedan, SubCompact, Electric Vehicle |
| A3 |
| Schedule of Items – Item#9E Sedan, Compact, Electric Vehicle |
A4 Schedule of Items – Item #30E 4X2 Cargo Van, Electric Plug In, Min 5000 lBS
GVWR
A5 Schedule of Items – Item #134E 4X2, Multistop Van, Min 10,001 LBS GVWR, Electric
The schedule of items can be found in Attachments A1- A6 as follows:
Attachment No. Description
| A1 |
| Schedule of Items – Item #7E Coupe, MiniCompact, 2 Passenger, 2 Door, Electric |
| A2 |
| Schedule of Items – Item #8E Sedan, SubCompact, Electric Vehicle |
| A3 |
| Schedule of Items – Item#9E Sedan, Compact, Electric Vehicle |
A4 Schedule of Items – Item #30E 4X2 Cargo Van, Electric Plug In, Min 5000 lBS
GVWR
A5 Schedule of Items – Item #134E 4X2, Multistop Van, Min 10,001 LBS Electric
A6 Schedule of Items – Item #888E Motor Vehicle, Commercial, Emerging Technologies
4. SECTION D.30 - I-FSS-168 OPTION TO EXTEND THE TERM OF THE CONTRACT (JUN 1996)
The language contained in the first paragraph is hereby changed;
FROM:
D.30 I-FSS-168 OPTION TO EXTEND THE TERM OF THE CONTRACT (JUN 1996)
The Government has the unilateral right to extend the term of this contract through the exercise of options. The total duration of this contract, including option(s), shall not exceed Four (4) years. This Four (4) year contract has One (1) Base Year Period and Three (1) Year Options. When any option to extend the term of this contract is exercised, the following conditions are applicable:
(a) The Government may extend the term of this contract by written notice to the Contractor within 30 days; provided that the Government shall give the Contractor a preliminary written notice of its intent to extend at least 60 days prior to contract expiration. The preliminary notice does not commit the Government to an extension.
(b) When the Government exercises its option to extend the term of this contract, prices in effect at the time the option is exercised will remain in effect during the option period, unless an adjustment is made in accordance with another contract clause (e.g., Economic Price Adjustment Clause).
D.30 I-FSS-168 OPTION TO EXTEND THE TERM OF THE CONTRACT (JUN 1996)
The Government has the unilateral right to extend the term of this contract through the exercise of options. The total duration of this contract, including option(s), shall not exceed the Base Period, which begins at the Date of Award, through August 31, 2011, plus Three (3) One (1) Year Options. When any option to extend the term of this contract is exercised, the following conditions are applicable:
(a) The Government may extend the term of this contract by written notice to the Contractor within 30 days; provided that the Government shall give the Contractor a preliminary written notice of its intent to extend at least 60 days prior to contract expiration. The preliminary notice does not commit the Government to an extension.
(b) When the Government exercises its option to extend the term of this contract, prices in effect at the time the option is exercised will remain in effect during the option period, unless an adjustment is made in accordance with another contract clause (e.g., Economic Price Adjustment Clause).
5. SECTION E.2 ADDENDUM TO 52.212.1 – INSTRUCTIONS TO OFFERORS – COMMERCIAL ITEMS
The language included within Number 2 – DUE DATE FOR PROPOSALS is hereby changed;
FROM:
Offerors shall submit their hard copy proposals by the due date listed on the solicitation. HARD COPY AND CD ROM PROPOSALS MUST BE RECEIVED BY 2:30 P.M. EASTERN TIME, OCTOBER 21, 2010 AT THE FOLLOWING ADDRESS:
GENERAL SERVICES ADMINISTRATION
Solicitation Bid Room, Room 1065 SOLICITATION NO. QMAA-JC-100001-N / L. Weiskopf (703)605-5721 7th & D Streets, SW Washington, DC 20407-0000 Phone: 202.708.5961
Pricing must also be submitted via AUTOBID no later than October 20, 2010, at 5:00 p.m. Eastern Time.
This is a standing solicitation through August 31, 2011. Offers may be submitted at any time to the address shown in Section A.1. In order to be considered for the first placement of vehicle orders, hard copy Technical and Price Proposals must be submitted by November 16, 2010 at 2:30 p.m. Eastern Standard Time, and AutoBid pricing must be entered by November 15, 2010 at 5:00 p.m. Eastern Standard Time.
Hard copy bids should be delivered to:
GENERAL SERVICES ADMINISTRATION
Solicitation Bid Room, Room 1065 SOLICITATION NO. QMAA-JC-100001-N / L. Weiskopf (703)605-5721 7th & D Streets, SW Washington, DC 20407-0000 Phone: 202.708.5961
Pricing must also be submitted via AUTOBID no later than November 15, 2010 at 5:00 p.m. Eastern Standard Time.
Only those responsible, responsive offerors that have submitted bids by the noted date and time will be eligible for the first round of order placement.
Any proposals received after the November 2010 closing dates and times will be reviewed and evaluated based on the following schedule: January 13, 2011; March 14, 2011; May 10, 2011, and August 31, 2011. If proposals are found acceptable, award will be made shortly thereafter. AutoBid will not be open during these subsequent periods.
Those Offerors planning to submit a proposal after the November 2010 closing dates and times are to submit in both a written paper format utilizing the documents included in the solicitation, and with a CD sent to the following address:
U.S. General Services Administration Vehicle Acquisition Support Division 2200 Crystal drive Suite 1000 Arlington, VA 22202 Attention: Laurel Weiskopf
6. The language included in Number 4 – SUBMISSION CONTENT AND FORMAT OF PROPOSALS;
SUBSECTION - c. PRICE PROPOSAL (Volume 3) – AUTOBID Is changed;
FROM:
AUTOBID - Offerors are also required to submit their pricing information in GSA’s AUTOBID. Prospective Offerors are required to obtain a user name and password for GSA’s secure on-line proposal application (AutoBid). User name and password may be obtained by submitting the solicitation number, company’s name, DUNS number, address, business size, user's name, telephone number, fax, email and proposed make and models to automotiveedi.partnerships@gsa.gov. Account information will be provided within ten (10) business days of request. All offerors are required to input its proposed prices into AutoBid by 5:00 PM ET no later than October 20, 2010. Also, offerors AUTOBID entry shall be printed and submitted under Volume 3.
AUTOBID - Offerors are also required to submit their pricing information in GSA’s AUTOBID. Prospective Offerors are required to obtain a user name and password for GSA’s secure on-line proposal application (AutoBid). User name and password may be obtained by submitting the solicitation number, company’s name, DUNS number, address, business size, user's name, telephone number, fax, email and proposed make and models to automotiveedi.partnerships@gsa.gov. Account information will be provided within ten (10) business days of request. All offerors that wish to be considered for the first placement of orders are required to input its proposed prices into AutoBid by 5:00 PM EST no later than November 15, 2010. Also, offerors AUTOBID entry shall be printed and submitted under Volume 3.
7. SECTION F – EVALUATION
The language contained in Section F.1 EVALUATION – TECHNICAL is hereby changed;
FROM:
In evaluating offerors proposal, the Government will consider:
Proposals will be evaluated and a contract awarded under the Lowest Price Technically Acceptable Approach to the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. The significant evaluation factors are Technical Capability, Management Capabilities, Past Performance, and Price.
Offerors are on notice that proposals which are unrealistic in terms of technical commitment or lack of technical competence or indicative of failure to comprehend the complexities and risks of the solicitation requirements will be rejected. Although discussions concerning technical proposals are not planned, the procurement team reserves the right to bring unacceptable offers up to an acceptable level through negotiations.
The following represent the factors used in the evaluation of proposals to determine the acceptability of offers:
FACTOR 1: TECHNICAL CAPABILITY – The Government will evaluate the information provided for this factor to determine if the offeror demonstrates it has the technical capability to perform the work solicited. Technical capability is sound; offeror can meet delivery and performance requirements; and performance risk to government is mitigated.
FACTOR 2: MANAGEMENT CAPABILITIES – The Government will evaluate the information provided for this factor to determine if the offeror demonstrates it has the ability to successfully manage this effort. Offeror has documented quality processes to assure complete compliance with all solicitation requirements and has adequate management oversight.
FACTOR 3: PAST PERFORMANCE – The Government will evaluate the information provided for this factor to determine if the offeror demonstrates it has satisfactory past performance in same or similar scope, size, and complexity of the products solicited and in managing projects and contracts of the kind contemplated.
FACTOR 4: PRICE – An evaluation of the Offeror’s price proposal will be made to determine if the price offered is realistic for the work to be performed, reflects a clear understanding of the requirements, and is consistent with the technical proposal. Price reasonableness determinations will be made by determining if competition exists and by comparing bid prices with established commercial or GSA pricing.
Technical expertise, management capability, and past performance, when combined, are more important than price. As technical proposals become more equal in merit, price becomes more important.
In evaluating offerors proposal, the Government will consider:
Proposals will be evaluated and a contract awarded under the Lowest Price Technically Acceptable Approach to the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. The significant evaluation factors are Technical Capability, Management Capabilities, Past Performance, and Price.
Offerors are on notice that proposals which are unrealistic in terms of technical commitment or lack of technical competence or indicative of failure to comprehend the complexities and risks of the solicitation requirements will be rejected. Although discussions concerning technical proposals are not planned, the procurement team reserves the right to bring unacceptable offers up to an acceptable level through negotiations.
Offerors are also on notice that if an award has already been made for a representative model, no other offers for that identical model will be accepted.
The following represent the factors used in the evaluation of proposals to determine the acceptability of offers:
FACTOR 1: TECHNICAL CAPABILITY – The Government will evaluate the information provided for this factor to determine if the offeror demonstrates it has the technical capability to perform the work solicited. Technical capability is sound; offeror can meet delivery and performance requirements; and performance risk to government is mitigated.
FACTOR 2: MANAGEMENT CAPABILITIES – The Government will evaluate the information provided for this factor to determine if the offeror demonstrates it has the ability to successfully manage this effort. Offeror has documented quality processes to assure complete compliance with all solicitation requirements and has adequate management oversight.
FACTOR 3: PAST PERFORMANCE – The Government will evaluate the information provided for this factor to determine if the offeror demonstrates it has satisfactory past performance in same or similar scope, size, and complexity of the products solicited and in managing projects and contracts of the kind contemplated.
FACTOR 4: PRICE – An evaluation of the Offeror’s price proposal will be made to determine if the price offered is realistic for the work to be performed, reflects a clear understanding of the requirements, and is consistent with the technical proposal. Price reasonableness determinations will be made by determining if competition exists and by comparing bid prices with established commercial or GSA pricing.
Technical expertise, management capability, and past performance, when combined, are more important than price. As technical proposals become more equal in merit, price becomes more important.
8. The language contained in Section F.4 METHOD OF AWARD FOR THE MASTER CONTRACT is hereby changed;
FROM:
F.4 METHOD OF AWARD FOR THE MASTER CONTRACT
Award will be made to only one (1) representative model from each offeror for each line item in the Schedule of Items in the solicitation (EXAMPLE: 1 GM, 1 NISSAN, 1 FORD). The successful offeror will be the lowest, responsive, responsible offeror who meets the Government’s requirements. Where more than one offer is received for a representative standard item for which there is only one model, award will be made to the lowest, responsive, responsible offeror who meets the Government’s requirements.
F.4 METHOD OF AWARD FOR THE MASTER CONTRACT
Award will be made to only one (1) representative model from each offeror for each line item in the Schedule of Items in the solicitation (EXAMPLE: 1 GM, 1 NISSAN, 1 FORD). The successful offeror will be the lowest, responsive, responsible offeror who meets the Government’s requirements. Where more than one offer is received for a representative standard item for which there is only one model, award will be made to the lowest, responsive, responsible offeror who meets the Government’s requirements.
Should there already be an award for a particular model; the Government will not displace any awards already made for that particular model.
image2.emf
ATTACHMENT A2.pdf
ATTACHMENT A2
ITEM 8E
SEDAN, SUBCOMPACT, ELECTRIC VEHICLE
The models identified below are not all-inclusive of those that meet the Federal Standard. Equivalent models that meet the minimum requirements may also be offered.
This is an all electric vehicle with estimated range of 80-120 miles. The drivetrain is configured with a brushless motor and a Lithium battery pack.
There is an on-board 220V battery charger. The charger will require a 30 amp outlet(similar to a dryer receptacle). A full charge may take up to 10 hours.
The contractor is fully responsible for the bumper to bumper warranty of this completed vehicle.
Item # 8E Item # 8E -- Optional Printable Page
GSA Components
GSA Min Req
LEAF
Body/Chassis
PASSENGER
COMPARTMENT
VOLUME - cu ft
TRIM LEVEL
BASE
MFG. MODEL
CODE
WHEEL BASE
min. in.
106.3
BASE CURB
WEIGHT w/ GSA min reqmts - lbs
BODY STYLE
SEDAN
Engine Minimums
HORSEPOWER
(min)
Alternative Fuel Engines
ELECTRIC
BATTERY
POWERED
VEHICLE
COMPLY
Emissions http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=main&VEHICLETYPESSUB=%20%208E--SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE&std_item=%20%208E&itemDesc=SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=option&VEHICLETYPESSUB=%20%208E--SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE&std_item=%20%208E&itemDesc=SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE http://apps.fas.gsa.gov/vehiclestandards/print_doc.cfm?Std_Item=%20%208E&itemDesc=SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE&VEHICLETYPESSUB=%20%208E--SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE&itemDesc=SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
AT-PZEV CARB
EMISSIONS
RATING
ZEV
Transmission
AUTOMATIC
TRANSMISSION
ECVT-COMPLY
Drive Axle
TRACTION
CONTROL
Doors and Windows
REAR WINDOW
DEFROSTER
Electronics Audio Visual
BLUETOOTH
COMPATIBLE
SYSTEM
Interior
TILT STEERING
AIR
CONDITIONING
CRUISE
CLOTH
UPHOLSTERY
Floor
FLOOR MATS
Radio
AM/FM RADIO
WITH COMPACT
DISC PLAYER
Safety
STABILITY
SIDE COMPLY
http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
SUPPLEMENTAL
RESTRAINT
SYSTEM, ROW1
SIDE
SYSTEM ROW 2
POWER
ANTILOCK
BRAKES, FRONT
AND REAR
FRONT
SYSTEM DRIVER
& FRONT
Tires and Wheels
TIRE PRESSURE
MONITORING
SPARE TIRE
ASSEMBLY
COMPACT
TIRES
P205/55R16
Warranty
BATTERY PACK
WARRANTY
8YR/100,000 MILES
OEM CORROSION
5YR/100,000 MILES
OEM
POWERTRAIN
5YR/60,000 MILES
COMPREHENSIVE
3 yr/36,000 mile bumper to bumper
3YR/36,000 MILES
S=Standard SA=Stand
Alone
PKG=Package(includes, requires or excludes other options)
NA=Not
Available http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
Federal Standard Number: 122 image3.emf
ATTACHMENT A3.pdf
ATTACHMENT A3
ITEM 9E
SEDAN, COMPACT, ELECTRIC VEHICLE
The models identified below are not all-inclusive of those that meet the Federal Standard. Equivalent models that meet the minimum
This is an all electric vehicle with estimated range of 80-120 miles. The drivetrain is configured with a brushless motor and a Lithium battery
There is an on-board 220V battery charger. The charger will require a 30 amp outlet(similar to a dryer receptacle). A full charge may take up to
Item # 9E Item # 9E -- Optional Printable Page
VOLT
TBD
TRUNK VOLUME
- cu ft
Trunk
ENGINE TYPE
(Cylinders / Liters) http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=main&VEHICLETYPESSUB=%20%209E--SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE&std_item=%20%209E&itemDesc=SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=option&VEHICLETYPESSUB=%20%209E--SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE&std_item=%20%209E&itemDesc=SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE http://apps.fas.gsa.gov/vehiclestandards/print_doc.cfm?Std_Item=%20%209E&itemDesc=SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE&VEHICLETYPESSUB=%20%209E--SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE&itemDesc=SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
Fuel
FUEL CAPACITY
MIN GALLONS
REMOTE
KEYLESS ENTRY
KEYLESS START
WIPERS-
WINDSHIELD-
INTERMITTENT
WINDOWS &
DOOR LOCKS
front and rear
Lights and Lighting
DAYTIME
RUNNING
LIGHTS
STEERING
http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
FLOOR
COVERING
Carpet
Seats
FIRST ROW SEAT
TYPE
Bucket http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm image4.emf
ATTACHMENT A4.pdf
ATTACHMENT A4
ITEM 30E
4X2 CARGO VAN, ELECTRIC PLUG IN, MIN 5000 LBS GVWR
The models identified below are not all-inclusive of those that meet the Federal Standard. Equivalent models that meet the minimum
The compact cargo van specified, shall be a plug in electric vehicle (EV), enclosed all-steel unitized, or on-frame constructed, integral body and cab. The curbside shall be provided withsliding cargo door. Vehicle shall be equipped with a driver and passenger seat, both seats being high-back bucket seat configuration; cab compartment floor covering; all doors, except rear door shall be capable of being opened from both the inside and the outside, having keyed locks; door checks or straps; dome light(s); and maintenance necessities serviceable from the outside.
The electric vehicle features include the following:
Top speed of 70 MPH
80 mile range on one full battery charge (chargable from 120 or 240 volt outlet-6 hours w/240 volt or 12 hours with 120 volt charging outlet)
The Contractor shall furnish a charger station for each vehicle purchased.
24kWh lithium-ion-iron phosphate batteries and 50 kw electric motor
Zero emissions
No noise, gear changes, vibration
NOTE: The contractor shall be fully responsible for the bumper to bumper warranty of this completed vehicle including, but notlimited to, the chassis,drive-train, all modifications.
Item # 30E
Item # 30E --
Optional
Printable Page
TRANCONEV
GROSS VEHICLE
WEIGHT RATING
(min/max- lbs)
5060 LBS
114.6
BODY SIZE,
OVERALL
LENGTH min./max.
in.
72 INCHES
67 HP/50KW
INDUCTION
MOTOR
24 KwH LITHIUM-
ION IRON
PHOSPHATE
http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=main&VEHICLETYPESSUB=%2030E--4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR&std_item=%2030E&itemDesc=4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=option&VEHICLETYPESSUB=%2030E--4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR&std_item=%2030E&itemDesc=4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=option&VEHICLETYPESSUB=%2030E--4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR&std_item=%2030E&itemDesc=4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR http://apps.fas.gsa.gov/vehiclestandards/print_doc.cfm?Std_Item=%2030E&itemDesc=4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR&VEHICLETYPESSUB=%2030E--4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR&itemDesc=4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
PRIMARY DRIVE
AXLE
Electrical
CHARGER - ON
BOARD
DARK TINTED
GLASS
REAR DOOR
180 DEGREE SWING
OPEN
SIDE DOOR TYPE
LH/RH SLIDING
REAR LINING,
CARGO VAN
FRONT CARPETED,
CARGO VINYL
SEATING
CAPACITY min.
http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
2-INDIVIDUAL
HEAD AND
CHEST SIDE-
IMPACT AIR
BAGS
SYSTEM, ALL
SEATED
POSITIONS
5 YEAR
http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
3 YEAR/36,000 MILE
BUMPER-TO-
BUMPER
Federal Standard Number: 307 image5.emf
ATTACHMENT A5.pdf
ATTACHMENT A5
ITEM 134E
4X2 MULTISTOP VAN, MIN 10,001 LBS GVWR, ELECTRIC
The models identified below are not all-inclusive of those that meet the Federal Standard. Equivalent models that meet the minimum
This forward-control, walk-in style vehicle shall have an integral driver's compartment and enclosed body and as specified. The standard commercial delivery van specifiedshall utilize a current model year chassis with all electric drive. This is an all electric truck with estimated range of 50-75 miles. The drivetrain is configured with a liquid cooled brushless motor and a Lithium BatteryPack.
There is an on-board 220V battery charger. The charger will requirea 30 amp outlet (similar to a dryer receptacle). A full charge may take up to
The contractor is fully responsible for the bumper to bumper warranty of this completed vehicleincluding, but not limited to, the chassis, drive-train, fuel system and all modifications.
Therequirementslisted below shall be the minimum furnished on this vehicle:
1. The body shall be constructed of sheet aluminum or magnesium alloys of equal strength minimum 0.100 in side panels and with an aluminum frame or molded fiberglass.
2. The roof shall be supported by 4integral longitudinal ribs and metal roof reinforcements which are bonded in placeon 24 in spacing front to rear.
3. The nose section of body and interior engine cover may be of composite construction. This shall provide access for all operator required engine and drive train service and maintenance.
4. Upholstered high back driver and assistant seats set on tilt pedestals shall be provided.Seats shall be adjustable fore, aft and for height, with positive locking device to secure seat in place when in use. Both seats shall be provided with3 pointsafety belts.
5. The cab compartment shall be furnished with a minimum 10,000 BTU rated heater.
6. Dome lights shall be provided: one inthe driver'scompartment and two in the cargo compartment, equally spaced.
7. Dual adjustable combination (flat and convex) swing away mirrors shall be furnished.
9. Sidedoor stepsshallbe provided at both front entrances, and shall havea tread plate surface.
10. Body shall have sliding type front doors. The door operating handles shallbe capable of serving as door opening/closing handles, or door grab handles shall be provided.
11. All doors shall be furnished with cylinder type locks for the same key, with unlike keys on vehicles to the samedestination.
12. Sliding windows with not less than 360 sq in of clear glassshallbe provided in the frontdoors. All door windows shall be safety glass mountedin molded rubber (or equal) in the upper section of the doors. Windows shall beweather tight.
13. Reardoor clear opening shall be a minimum of 35 inwide and 65 in high. Rear doors shall have an R38 door check with a 3 inch extension to hold door in full open position. Grab handle shall be provided on inside of rear door, in addition to doorlatch operating handle, to assist in closing door(s).
14. A fullwidth, minimum7 inch deep safety-tread steel step shall be furnished.
15. The spare tire carrier shall be located in the cargo area directly behind the bulkheadon the driver?s sidewall.
16. Not less than five full width cross members (including endsills) shall be furnished. Stub cross members, as requiredat wheel housing to provide required strength, shall be furnished. Flooring with integrally formed cross members meets these requirements.
17. Roofshall be one piece center section with caps at the front, rear and sides, not less than 0.032 in thick aluminumor molded fiberglass. All body seams and joints shall be dust and weather sealed.
18. Cargo area floor shall be all aluminum ribbed floor planks. The cargo floor shall be not less than 0.125 in. The driver's area and steps shall be not less than 18 gage (0.0478 in).
19. Floor and support members shall sustainan evenly distributed load of 125 lb per sq ft of floor area. Alternate floor construction shall be of extruded aluminum, dry freight construction with strengthat least equal to that of steel.
White is the standard color forthis item.Ifa color other than white is desired, option "BPC" Body Paint Color mustbe ordered.Ordering option
BPC requires that a color be chosen from the "Quantity andColor Selections" page in AUTOCHOICE.
Body Load Length, ft: 12
BodyLoadHeight:, ft: 6 Body Interior Capacity Min, ft3: 550
CargoDoor Type: Center Panel Doors
Item # 134E
Item # 134E --http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=main&VEHICLETYPESSUB=134E--4X2%20MULTISTOP%20VAN,%20MIN%2010,001%20LBS%20GVWR,%20ELECTRIC&std_item=134E&itemDesc=4X2%20MULTISTOP%20VAN,%20MIN%2010,001%20LBS%20GVWR,%20ELECTRIC http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=option&VEHICLETYPESSUB=134E--4X2%20MULTISTOP%20VAN,%20MIN%2010,001%20LBS%20GVWR,%20ELECTRIC&std_item=134E&itemDesc=4X2%20MULTISTOP%20VAN,%20MIN%2010,001%20LBS%20GVWR,%20ELECTRIC http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=option&VEHICLETYPESSUB=134E--4X2%20MULTISTOP%20VAN,%20MIN%2010,001%20LBS%20GVWR,%20ELECTRIC&std_item=134E&itemDesc=4X2%20MULTISTOP%20VAN,%20MIN%2010,001%20LBS%20GVWR,%20ELECTRIC http://apps.fas.gsa.gov/vehiclestandards/print_doc.cfm?Std_Item=134E&itemDesc=4X2%20MULTISTOP%20VAN,%20MIN%2010,001%20LBS%20GVWR,%20ELECTRIC&VEHICLETYPESSUB=134E--4X2%20MULTISTOP%20VAN,%20MIN%2010,001%20LBS%20GVWR,%20ELECTRIC&itemDesc=4X2%20MULTISTOP%20VAN,%20MIN%2010,001%20LBS%20GVWR,%20ELECTRIC
W10056-115
Ze
Base
MFG. MODEL CODE
Ze14
10001 / 16000
10,001
14,500
WHEEL BASE min. in.
HORSEPOWER (min)
100(75KW)
146(100 kw)
160 (120KW)
Motor
TORQUE (lb ft)
470 lb ft
ELECTRIC BATTERY
POWERED VEHICLE
Lithium
Lithium Iron
Magnesium
Phosphate
Lithium Ion
BOARD BATTERY
14kw-220v, 36A
Comply
Exterior
REAR VIEW
MIRRORS
COMBINATION
DOORS
KEYED DOOR LOCKS
DAYTIME RUNNING
AIR CONDITIONING
http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
POWER STEERING
FLOOR COVERING
IN CAB ONLY
AM/FM RADIO WITH
COMPACT DISC
PLAYER
SEATING CAPACITY
min.
RESTRAINT SYSTEM,
ALL SEATED
RESTRAINT SYSTEM
DRIVER & FRONT
POWER ANTILOCK
BRAKES, FRONT AND
REAR
Suspension
SUSPENSION/SHOCKS
HDA
LOAD RANGE
F
DUAL REAR
LT225/70R195
LT225/70R19.5AS
Vendor Furnished Body Items
STEP TYPE REAR
BODY LENGTH, 12 FT
BACK-UP ALARM
INTERIOR Comply http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
PARTITION, SOLID
5 Years
3yr/36,000 mile
OEM POWERTRAIN
3 yrs / 36000 miles
3 Years/36,000
3yr/ 36,000 miles
CONTRACTOR
BODY WARRANTY
1 yr / 12000 miles
1 Year/12,000
1yr/12,000 miles
ATTACHMENT A1.pdf
ATTACHMENT A1
ITEM 7E
COUPE, MINICOMPACT,2 PASSENGER, 2 DOOR, ELECTRIC
The models identified below are not all-inclusive of those that meet the Federal Standard. Equivalent models that meet the minimum
This is an all electric vehicle with estimated range of 80-120 miles. The drivetrain is configured with a brushless motor and a Lithium battery
There is an on-board 220V battery charger. The charger will require a 30 amp outlet(similar to a dryer receptacle). A full charge may take up to
Item # 7E Item # 7E -- Optional Printable Page
WISE
HATCH BACK
58 (43KW) Motor
CHARGER - ON 220 Volt, 25Amp, http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=main&VEHICLETYPESSUB=%20%207E--COUPE,%20MINICOMPACT,2%20PASSENGER,%202%20DOOR,%20ELECTRIC&std_item=%20%207E&itemDesc=COUPE,%20MINICOMPACT,2%20PASSENGER,%202%20DOOR,%20ELECTRIC http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=option&VEHICLETYPESSUB=%20%207E--COUPE,%20MINICOMPACT,2%20PASSENGER,%202%20DOOR,%20ELECTRIC&std_item=%20%207E&itemDesc=COUPE,%20MINICOMPACT,2%20PASSENGER,%202%20DOOR,%20ELECTRIC http://apps.fas.gsa.gov/vehiclestandards/print_doc.cfm?Std_Item=%20%207E&itemDesc=COUPE,%20MINICOMPACT,2%20PASSENGER,%202%20DOOR,%20ELECTRIC&VEHICLETYPESSUB=%20%207E--COUPE,%20MINICOMPACT,2%20PASSENGER,%202%20DOOR,%20ELECTRIC&itemDesc=COUPE,%20MINICOMPACT,2%20PASSENGER,%202%20DOOR,%20ELECTRIC http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
Single Phase Input
CARPETED
FRONT BUCKET
SEATS
http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
ATTACHMENT A2.pdf
ATTACHMENT A2
ITEM 8E
SEDAN, SUBCOMPACT, ELECTRIC VEHICLE
The models identified below are not all-inclusive of those that meet the Federal Standard. Equivalent models that meet the minimum
This is an all electric vehicle with estimated range of 80-120 miles. The drivetrain is configured with a brushless motor and a Lithium battery
There is an on-board 220V battery charger. The charger will require a 30 amp outlet(similar to a dryer receptacle). A full charge may take up to
Item # 8E Item # 8E -- Optional Printable Page
LEAF
BASE
106.3
SEDAN
Emissions http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=main&VEHICLETYPESSUB=%20%208E--SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE&std_item=%20%208E&itemDesc=SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=option&VEHICLETYPESSUB=%20%208E--SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE&std_item=%20%208E&itemDesc=SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE http://apps.fas.gsa.gov/vehiclestandards/print_doc.cfm?Std_Item=%20%208E&itemDesc=SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE&VEHICLETYPESSUB=%20%208E--SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE&itemDesc=SEDAN,%20SUBCOMPACT,%20ELECTRIC%20VEHICLE http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
AT-PZEV CARB
EMISSIONS
RATING
ZEV
ECVT-COMPLY
Electronics Audio Visual
BLUETOOTH
COMPATIBLE
SIDE COMPLY
http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
COMPACT
P205/55R16
8YR/100,000 MILES
5YR/100,000 MILES
5YR/60,000 MILES
http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
ATTACHMENT A3.pdf
ATTACHMENT A3
ITEM 9E
SEDAN, COMPACT, ELECTRIC VEHICLE
The models identified below are not all-inclusive of those that meet the Federal Standard. Equivalent models that meet the minimum
This is an all electric vehicle with estimated range of 80-120 miles. The drivetrain is configured with a brushless motor and a Lithium battery
There is an on-board 220V battery charger. The charger will require a 30 amp outlet(similar to a dryer receptacle). A full charge may take up to
Item # 9E Item # 9E -- Optional Printable Page
VOLT
TRUNK VOLUME
- cu ft
Trunk
ENGINE TYPE
(Cylinders / Liters) http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=main&VEHICLETYPESSUB=%20%209E--SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE&std_item=%20%209E&itemDesc=SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=option&VEHICLETYPESSUB=%20%209E--SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE&std_item=%20%209E&itemDesc=SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE http://apps.fas.gsa.gov/vehiclestandards/print_doc.cfm?Std_Item=%20%209E&itemDesc=SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE&VEHICLETYPESSUB=%20%209E--SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE&itemDesc=SEDAN,%20COMPACT,%20ELECTRIC%20VEHICLE http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
Fuel
FUEL CAPACITY
MIN GALLONS
KEYLESS ENTRY
KEYLESS START
WINDOWS &
DOOR LOCKS
front and rear http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
Carpet
Bucket http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
ATTACHMENT A4.pdf
ATTACHMENT A4
ITEM 30E
4X2 CARGO VAN, ELECTRIC PLUG IN, MIN 5000 LBS GVWR
The models identified below are not all-inclusive of those that meet the Federal Standard. Equivalent models that meet the minimum
The compact cargo van specified, shall be a plug in electric vehicle (EV), enclosed all-steel unitized, or on-frame constructed, integral body and cab. The curbside shall be provided withsliding cargo door. Vehicle shall be equipped with a driver and passenger seat, both seats being high-back bucket seat configuration; cab compartment floor covering; all doors, except rear door shall be capable of being opened from both the inside and the outside, having keyed locks; door checks or straps; dome light(s); and maintenance necessities serviceable from the outside.
The electric vehicle features include the following:
Top speed of 70 MPH
80 mile range on one full battery charge (chargable from 120 or 240 volt outlet-6 hours w/240 volt or 12 hours with 120 volt charging outlet)
The Contractor shall furnish a charger station for each vehicle purchased.
24kWh lithium-ion-iron phosphate batteries and 50 kw electric motor
Zero emissions
No noise, gear changes, vibration
NOTE: The contractor shall be fully responsible for the bumper to bumper warranty of this completed vehicle including, but notlimited to, the chassis,drive-train, all modifications.
Item # 30E
Item # 30E --
TRANCONEV
114.6
BODY SIZE,
OVERALL
LENGTH min./max.
in.
72 INCHES
67 HP/50KW
INDUCTION
24 KwH LITHIUM-
ION IRON
PHOSPHATE
http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=main&VEHICLETYPESSUB=%2030E--4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR&std_item=%2030E&itemDesc=4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=option&VEHICLETYPESSUB=%2030E--4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR&std_item=%2030E&itemDesc=4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR http://apps.fas.gsa.gov/vehiclestandards/template.cfm?page=option&VEHICLETYPESSUB=%2030E--4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR&std_item=%2030E&itemDesc=4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR http://apps.fas.gsa.gov/vehiclestandards/print_doc.cfm?Std_Item=%2030E&itemDesc=4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR&VEHICLETYPESSUB=%2030E--4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR&itemDesc=4X2%20CARGO%20VAN,%20ELECTRIC%20PLUG%20IN,%20MIN%205000%20LBS%20GVWR http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
PRIMARY DRIVE
AXLE
DARK TINTED
GLASS
REAR DOOR
180 DEGREE SWING
OPEN
SIDE DOOR TYPE
LH/RH SLIDING
REAR LINING,
CARGO VAN
FRONT CARPETED,
CARGO VINYL
SEATING
CAPACITY min.
http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
2-INDIVIDUAL
HEAD AND
CHEST SIDE-
IMPACT AIR
BAGS
http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm http://apps.fas.gsa.gov/vehiclestandards/template.cfm
3 YEAR/36,000 MILE
BUMPER-TO-
ATTACHMENT A5.pdf
ATTACHMENT A5
ITEM 134E
4X2 MULTISTOP VAN, MIN 10,001 LBS GVWR, ELECTRIC
The models identified below are not all-inclusive of those that meet the Federal Standard. Equivalent models that meet the minimum
This forward-control, walk-in style vehicle shall have an integral driver's compartment and enclosed body and as specified. The standard commercial delivery van specifiedshall utilize a current model year chassis with all electric drive. This is an all electric truck with estimated range of 50-75 miles. The drivetrain is configured with a liquid cooled brushless motor and a Lithium BatteryPack.
There is an on-board 220V battery charger. The charger will requirea 30 amp outlet (similar to a dryer receptacle). A full charge may take up to
The contractor is fully responsible for the bumper to bumper warranty of this completed vehicleincluding, but not limited to, the chassis, drive-train, fuel system and all modifications.
Therequirementslisted below shall be the…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .