AMENDMENT 001 - 1-1AA ELECTRIC VEHICLE SOLICITATION.docx

DOCX document 485 KB Posted

Attached to
Electric Passenger Cars and Cargo Vans, to include Electric - Extended Range Vehicles
Solicitation number
QMAA-JC-100001-N
Issued by

About this file

Amendment 001 to QMAA-JC-100001-N

View the file

Other files

File Type Posted
Amendment 010.docx DOCX document
Amendment 009.docx DOCX document
Attachment 1-1L Changes to Federal Standard 307AP Electric Veh.pdf PDF
Amendment 008.docx DOCX document
Attachment 1-1K Changes to Federal Standard 122BC Electric Veh.pdf PDF
Amendment 007.docx DOCX document
SOLICITATION QUESTIONS AND ANSWERS 1105.docx DOCX document
Amendment 006.docx DOCX document
Amendment 005.docx DOCX document
Amendment 004.docx DOCX document
Amendment 003.docx DOCX document
Questions and Answers Solicitation QMAA-JC-100001-N.docx DOCX document
Questions Answers QMAA-JC-100001-N.docx DOCX document
Amendment 002.docx DOCX document
1-1G Attachment G - Fed Std 307AP.pdf PDF
1-1E Attachment E - AutoChoice Online Ordering Instructions.docx DOCX document
1-1C Attachment C- Proposal Checklist.docx DOCX document
1-1J ATTACHMENT J - 1449 FORM.pdf PDF
1-1F Attachment F - Fed Std 122BC.pdf PDF
1-1D Attachment D -Exceptions Spreadsheet.xlsx XLSX spreadsheet
1-1H Attachment H - Dealers Layout.xlsx XLSX spreadsheet
1-1A ELECTRIC VEHICLE SOLICITATION.docx DOCX document
1- 1B Attachment B - Model Subcontracting Plan.docx DOCX document
Show all 23

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE
PAGE OF PAGES
1
94

2. AMENDMENT/MODIFICATION NO.

AMENDMENT 001

3. EFFECTIVE DATE

9/24/2010

4. REQUISITION/PURCHASE REQ. NO.

5. PROJECT NO. (IF APPLICABLE)

6. Issued By
Code
7. ADMINISTERED BY (If other than Item 6)
Code

U.S. GENERAL SERVICES ADMINISTRATION

AUTOMOTIVE ACQUISITION SUPPORT DIVISION (QMAA)

2200 CRYSTAL DRIVE, SUITE 1006

ARLINGTON, VA, 22202

8. Name and Address of Contractor (No., street, county, State and ZIP Code)

9A. AMENDMENT OF SOLICITATION NO.

QMAA-JC-100001-N

X
9B. DATED (SEE ITEM 11)

SEPTEMBER 23, 2010

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE
FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X
The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers
is extended
X
is not extended.

Offer's must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning ___1____copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF : FAR 43.103(b) CHANGE CLAUSE

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

This amendment replaces and supersedes attachment 1-1A within solicitation QMAA-JC-100001-N with the attached.

15A. NAME AND TITLE OF SIGNER (Type or print)
16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)
15B. CONTRACTOR/OFFEROR
15C. DATE SIGNED
16B. UNITED STATES OF AMERICA
16C. DATE SIGNED

BY ______________________________________________

(Signature of person authorized to sign)

(Signature of Contracting Officer)

GSA Federal Acquisition Service

September 24, 2010

Dear Prospective Offeror:

The General Services Administration (GSA) appreciates your interest in Solicitation Number QMAA-JC-100001-N for Electric Passenger Cars, Cargo Vans, to include Electric – Extended Range Vehicles for a Base Period of 9-Months, with Three – One Year Option Periods.

This solicitation is targeted to OEM manufacturers, and their certified representatives, that meet all trade, regulatory and other conditions required to sell light duty passenger cars and trucks, and medium / heavy duty vehicles in the United States.

This solicitation is being released via the Government Wide Point of Entry located via the FedBizOpps site at www.fbo.gov. In order to conduct this procurement most effectively, all notices and postings will be made at this location. Please be aware that the solicitation, questions and answers, comments, or any other information will not be disseminated in any other format. Be sure you check the web site regularly for any amendments. We suggest that you also bookmark GSA’s Automotive Acquisition Support Division’s web site as it contains information of interest associated with automotive programs www.gsa.gov/automotive.

Offerors are encouraged to submit a complete offer. Offerors should propose their best price with their initial offer, as it is GSA’s goal to award without discussions. Note that substantially incomplete offers will be rejected.

Should you have any questions, please contact me at (703) 605-5721. I look forward to receiving your proposal!

Sincerely, Laurel A. Weiskopf Contracting Officer Automotive Acquisition Support Division (QMAA)

TABLE OF CONTENTS

SECTION A – GENERAL4
A.1 ADDITIONAL INFORMATION FOR STANDARD FORM 1449:4
A.2 A-FSS-2-A (OCT 1988)4
A.3 GSAR 552.219-71 NOTICE TO OFFERORS OF SUBCONTRACTING PLAN REQUIREMENTS (JUN 2005)4
A.4 CP-FSS-3 NOTICE: REQUESTS FOR EXPLANATION OR INFORMATION (MAR 1996)5
A.5 CP-FSS-4-A SOLICITATION COPIES (MAR 1996)5
A.6 CP-FSS-20 SECURITY EXAMINATION OF HAND-DELIVERED OFFERS (JAN 1998)5

SECTION B - SCHEDULE OF ITEMS AND REQUIREMENTS

B.1 B-FSS-96 ESTIMATED SALES6
B.2PRICING6
B.3GSA AUTOMOTIVE PROGRAM6
B.4DEFINITIONS7
B.5SCHEDULE OF ITEMS7
B.6 – STATUTORY PRICE LIMITATION8
SECTION C – ADDITIONAL REQUIREMENTS9
C.1 DELIVERABLES9
C.2 POINT OF CONTACTS AND RESPONSIBILITIES10
C.3WEEKLY STATUS REPORTS10
C.4WHEELS-OFF-GROUND DELIVERY12
C.5IDENTIFICATION OF VEHICLES12
C.6DEALER DELIVERY REQUIREMENT13
C.7SHIPMENT DELAYS14
C.8NOTIFICATION OF VEHICLE DEFECTS14
C.9PUBLIC LAW 94-163 (SECTION 510)15
C.10AVAILABILITY OF FUNDS15
C.11GUARANTEED MINIMUM QUANTITY15
C.12EVIDENCE OF SHIPMENT OF MANUALS15
C.13ADMINISTRATIVE FEE15
C.14GSA FORM 161115
C.15 CONTRACT ADMINSTRATION INFORMATION16
C.16VEHICLE AVAILABILITY LISTING (VAL)17
C.17ADDENDUM TO THE SOLICITATION17

C.18 NEXT MODEL YEAR

SECTION D – CONTRACT CLAUSES AND PROVISIONS 19

D.1 52.213-3 OFFEROR RESPONSIBILITIES AND CERTIFICATIONS COMMERCIALITEMS

D.2 52.212-4 CONTRACT TERMS AND CONDITIONS—COMMERCIAL ITEMS (JUNE 2010)31
D.3 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS—COMMERCIAL ITEMS (JUL 2010)38
D.4 52.216-18 ORDERING (OCT 1995) (DEVIATION II -- FEB 2007)43
D.552.216-19 ORDER LIMITATIONS (OCT 1995) (DEVIATION II - FEB 2007) 6.506(B)43
D.652.216-22 INDEFINITE QUANTITY (OCT 1995)44

D.7 52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN

D.8 52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE

NATIONAL LABOR RELATIONS ACT (JUNE 2010)

D.952.223-11 OZONE-DEPLETING SUBSTANCES (MAY 2001)54
D.1052.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)55
D.11552.211-72 REFERENCES TO SPECIFICATIONS IN DRAWINGS (FEB 1996)56
D.12552.211-74 CHARGES FOR MARKING (FEB 1996)56
D.13552.211-75 PRESERVATION, PACKAGING, AND PACKING (FEB 1996)56
D.14552.211-77 PACKING LIST (FEB 1996)56
D.15552.211-81 TIME OF SHIPMENT (FEB 1996) (ALTERNATE I—FEB 1996)57

D.16 552.211-91 VEHICLE DECALS,STICKERS,AND DATA PLATES..57

D.17552.212-71 CONTRACT TERMS AND CONDITIONS APPLICABLE TO GSA ACQUISITION OF COMMERCIAL ITEMS (JUL 2003)57
D.18552.216-71 ECONOMIC PRICE ADJUSTMENT—STOCK AND SPECIAL ORDER PROGRAM CONTRACTS (SEP 1999) (ALTERNATE I—SEP 1999) (ALTERNATE II—SEP 1999)58
D.19552.216-72 PLACEMENT OF ORDERS, ALTERNATE I (SEP 1999)59
D.20CI-FSS-002 SUBMISSION OF OFFERS—ADDITIONAL INSTRUCTIONS (MAR 1996)60
D.21E-FSS-522 INSPECTION AT DESTINATION (MAR 1996)60
D.22F-FSS-200-B DELIVERY--F.O.B. DESTINATION (MAY 1991)61
D.23F-FSS-285 WAIVER OF DELIVERY SCHEDULE (APR 1984)61
D.24 F-FSS-736-B EXPORT TRAFFIC RELEASE (SEP 1995)61
D.25F-FSS-742 NOTICE OF SHIPMENT (MAR 1996)62
D.26 F-FSS-772 CARLOAD SHIPMENTS (APR 1984)62
D.27G-FSS-900-A CONTACT FOR CONTRACT ADMINISTRATION (JAN 1994)62
D.28G-FSS-914-B CONTRACTOR'S REMITTANCE (PAYMENT) ADDRESS (SEP 1996)62
D.29I-FSS-100-A SCOPE OF CONTRACT (OCT 1997)63
D.30I-FSS-168 OPTION TO EXTEND THE TERM OF THE CONTRACT (JUN 1996)63
D.31I-FSS-965 INTERPRETATION OF CONTRACT REQUIREMENTS (APR 1984)64
D.3252.204-7 CENTRAL CONTRACTOR REGISTRATION (APR 2008)64

D.33 52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST- TIER SUBCONTRACT AWARDS

SECTION E - INSTRUCTIONS TO OFFERORS

E.1 52.212-1 INSTRUCTIONS TO OFFERORS-COMMERCIAL ITEMS (JUNE 2008)

E.2 ADDENDUM TO 52.212-1 - INSTRUCTIONS TO OFFERORS—COMMERCIAL ITEMS73
E.352.215-6 PLACE OF PERFORMANCE (OCT 1997)80
E.452.216-1 TYPE OF CONTRACT (APR 1984)81
E.552.219-1 SMALL BUSINESS PROGRAM REPRESENTATIONS (MAY 2004)81
E.652.225-18 PLACE OF MANUFACTURE (SEP 2006)83
E.752.225-6 TRADE AGREEMENTS CERTIFICATE (JAN 2005)84
E.8FAR 52.2332 SERVICE OF PROTEST (AUG 1996)85
E.952.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)85
E.10552.216-73 ORDERING INFORMATION (SEP 1999) (ALTERNATE I—SEP 1999)86
E.11552.217-71 NOTICE REGARDING OPTION(S) (NOV 1992)86
E.12A-FSS-12-A PERIOD FOR ACCEPTANCE OF OFFERS (MAR 1996)86
E.13K-FSS-1 AUTHORIZED NEGOTIATORS (MAR 1998)87
E.14L-FSS-490 UNSOLICITED SAMPLES, DESCRIPTIVE LITERATURE, OR BRAND NAME REFERENCES (APR 1984)87
E.15L-FSS-59 AWARD (APR 1984)87
E.16PRE-PROPOSAL CONFERENCE87
E.17TELECOPIER OR FACSIMILE SUBMISSIONS, MODIFICATIONS, OR87
WITHDRAWALS OF PROPOSALS87
SECTION F – EVALUATION87
F.1 EVALUATION - TECHNICAL87
F.2 ADJECTIVAL RATINGS88
F.3 EVALUATION OF OPTIONS (AUG 1990)90
F.4 METHOD OF AWARD FOR THE MASTER CONTRACT90

F.5 METHOD OF AWARD FOR DELIVERY ORDERS PLACED AGAINST THE MASTER CONTRACT 91

SECTION A – GENERAL

A.1 ADDITIONAL INFORMATION FOR STANDARD FORM 1449:

Offerors shall submit offers to the following address:

U.S. GENERAL SERVICES ADMINISTRATION

Bid Room Solicitation No. QMAA-JC-100001-N / Laurel Weiskopf / (703) 605-5721 301 7th Street SW Room 1065 Washington DC 20407

Hard copy Technical and Price Proposals are due October 21, 2010 at 2:30 p.m. Eastern Time. AutoBid pricing is due October 20, 2010 at 5:00 p.m. Eastern Time.

A.2A-FSS-2-A (OCT 1988)
FSC GROUP:2310 and 2320
PRODUCT:PASSENGER MOTOR VEHICLES AND TRUCKS & TRUCK TRACTORS
WHEELED
NAICS:336111, 336112
PERIOD:Base – November 1, 2010 through August 31, 2011

Option 1 – September 1, 2011 through August 31, 2012 Option 2 – September 1, 2012 through August 31, 2013 Option 3 – September 1, 2013 through August 31, 2014

A.3 GSAR 552.219-71 NOTICE TO OFFERORS OF SUBCONTRACTING PLAN REQUIREMENTS (JUN 2005) The General Services Administration (GSA) is committed to assuring that maximum practicable opportunity is provided to small, HUBZone small, small disadvantaged, women-owned, veteran-owned, and service-disabled veteran-owned small business concerns to participate in the performance of this contract consistent with its efficient performance. GSA expects any subcontracting plan submitted pursuant to FAR 52.219-9, Small Business Subcontracting Plan, to reflect this commitment. Consequently, an offeror, other than a small business concern, before being awarded a contract exceeding $550,000 ($1,000,000 for construction), must demonstrate that its subcontracting plan represents a creative and innovative program for involving small, HUBZone small, small disadvantaged, women-owned, veteran-owned, and service-disabled veteran-owned small business concerns as subcontractors in the performance of this contract.

A.4 CP-FSS-3 NOTICE: REQUESTS FOR EXPLANATION OR INFORMATION (MAR 1996)

Oral or written requests for explanation or information regarding this solicitation should be directed to:

U.S. GENERAL SERVICES ADMINISTRATION

ATTN: Laurel Weiskopf

FAS, QMAA

Crystal Plaza 4 2200 Crystal Drive, Suite 1006 Arlington, VA 22202 Phone (703) 605-5721 or laurel.weiskopf@gsa.gov

A.5 CP-FSS-4-A SOLICITATION COPIES (MAR 1996)

In order to conduct this procurement most effectively and at the lowest costs, all information – including the solicitation, solicitation amendments, and any comments – will be posted only via the Internet at: http://www.fbo.gov.

A.6 CP-FSS-20 SECURITY EXAMINATION OF HAND-DELIVERED OFFERS (JAN 1998)

Offerors are advised that an offer in response to this solicitation is subject to physical examination, x-ray, or other inspection prior to acceptance at the location designated for receipt of offers. Inspection may be conducted by Government personnel or others acting on behalf of the Government. Any offer received at the address designated for receipt of offers after the date and time specified elsewhere in this solicitation for receipt of offers shall be processed in accordance with the late offers provision of this solicitation.

For any hand delivered offer, whether delivered by the offeror or a courier service, the offeror must allow sufficient time to accommodate inspection by designated security personnel. To facilitate this security inspection, initial delivery to an alternate office shall be required prior to final delivery by the offeror to the address designated for receipt of offers. (CAUTION: Delivery to the security inspection point does not constitute timely delivery for receipt of offers.)

The office providing security inspection is located at the following address:

GSA

Security Desk SOLICITATION NO. QMAA-JC-100001-N / L Weiskopf (703) 605-5721 301 7th street SW Room 1065 Washington DC 20407

SECTION B – SCHEDULE OF ITEMS AND VEHICLE REQUIREMENTS

B.1 B-FSS-96 ESTIMATED SALES

There is no historical sales data for these items.

The forecasted volume of 250 units is an estimate for the base period of performance of the contract considering the anticipated availability of these vehicles to the Government.

This estimate is neither an indication of future sales, nor a guarantee of actual sales realized.

B.2 PRICING

Commercial pricing structures are desired to the extent practicable. Offerors may propose on one or more item numbers solicited herein. Offerors must meet the standards specified for each item number offered and follow the proposal submission instructions noted in Sections E.1 and E.2.

B.3 GSA AUTOMOTIVE PROGRAM

GSA awards and administers the Automotive program. The program in its entirety purchases over $1 billion annually in high-quality vehicles and automotive services at significant savings for customer agencies. Under this program, GSA enters into Government-wide contracts with commercial firms to provide commercial products at stated prices for given periods of time. GSA Automotive offers a large selection of vehicles and related products and services. GSA is also the mandatory source for all new, non-tactical light vehicles for Executive branch agencies. As a procurement agent of the United States Government, GSA has the responsibility of issuing solicitations and awarding contracts to meet this obligation. GSA accepts orders from eligible parties in accordance with GSA Order ADM 4800.2E and the 1122 Program of the National Defense Authorization Act (www.gsa.gov/1122program).

GSA Automotive simplifies the procurement process for Federal agencies and industry partners. GSA ensures that potential vendors meet the responsibility determinations required by Federal Acquisition Regulation (FAR) Part 9 and offers products that meet Federal Vehicle Standards as described in Federal Standards 122BC and 307AP. GSA also examines the base vehicle and option prices received as a result of this competitive procurement and determines price reasonableness as it leverages the Government’s purchasing power. Following the GSA Automotive program ordering procedures, agencies will make a best value determination and place their order directly through AutoChoice.

AutoChoice is GSA’s secure on-line ordering application for light vehicles, ambulances, medium/heavy vehicles, buses, wreckers and car carriers. With AutoChoice, agencies can:

· Configure vehicles and choose vehicle equipment options

· Utilize side by side comparisons of each competitor’s vehicle model

· Calculate actual vehicle prices for the configured vehicle

· View the discounts from the manufacturers’ suggested retail price (MSRP) and dealers’ invoice

· View EPA Green House Gas Scores

· View miles per gallon fuel ratings

· View Federal Vehicle Standards

· View vehicle manufacturers’ past performance

· Select the vehicle that provides the best value

· Select a dealership

· Submit vehicle orders to GSA online

· Check vehicle order status

· Link to the NHTSA’s website to view crash test ratings

Further information about the GSA Automotive program can be found at www.gsa.gov/vehiclebuying.

B.4 DEFINITIONS

The following terms are defined:

Dealer Net Invoice Price: The initial charge to the dealer from the manufacturer which reflects the base vehicle invoice price and the invoice price for options, including freight and delivery charges.

Dealer Invoice Price: The amount the dealer pays for a car or truck. Included in this price may be a dealer holdback, which is a percentage of the vehicle's wholesale price and local charges assessed for brand advertising.

Net MSRP: Manufacturer’s Suggested Retail Price is the recommended selling price for a vehicle as set by the manufacturers.

NHTSA: National Highway Traffic Safety Administration

B.5 SCHEDULE OF ITEMS

The schedule of items can be found in Attachments A1- A5 as follows:

Attachment No. Description

A1
Schedule of Items – Item #7E Coupe, MiniCompact, 2 Passenger, 2 Door, Electric
A2
Schedule of Items – Item #8E Sedan, SubCompact, Electric Vehicle
A3
Schedule of Items – Item#9E Sedan, Compact, Electric Vehicle

A4 Schedule of Items – Item #30E 4X2 Cargo Van, Electric Plug In, Min 5000 lBS

GVWR

A5 Schedule of Items – Item #134E 4X2, Multistop Van, Min 10,001 LBS GVWR, Electric

Offerors are instructed to complete the following fields in AutoBid (See Section E.2):

· Unit price

· Miles per gallon (MPG)

· Green House Gas Score

· Net invoice price

· Net MSRP

· Assembly point

· Destination charge included in price

· Optional equipment additional shipment days (if required)

· Optional equipment pricing

· Any additional fill ins

B.6 – STATUTORY PRICE LIMITATION

This acquisition is subject to statutory price limitations pursuant to 31 U.S.C 1343. The current statutory price limitations were established in the Consolidated Appropriations Act, 2010, Public Law 111-117, Division C, Title VII, Section 702 (December 16, 2009). The statutory price limitation is subject to change and the Contractor is required to comply with the statutory price limitations in the base year and any option year of the contract.

Upon passage of this or a similar bill, the limits set forth in this bill shall not apply to any vehicle that is a commercial item and which operates on emerging motor vehicle technology.

SECTION C – ADDITIONAL REQUIREMENTS

C.1 DELIVERABLES

In addition to the vehicles purchased, the following deliverables are required:

Description
Due NLT
To
Weekly Status Report
Each Friday After Contract Award

automotiveedi.partnerships@gsa.gov

Shipment Delays
30 Days Prior to Shipping

Contracting Officer

Notification of Vehicle Defects
30 Days Prior to Shipping

Consignee with a copy to the Contracting Officer

Evidence of Shipment Manuals
Within 24 Hours of Shipping
1611 for Each Export Destination
30 Days in Advance of Anticipated Date of Availability for Shipment
Transportation Office on Delivery Order
Delivery Orders for Destinations Not on the Dealer’s Layout
Every 2 weeks
Vendor Availability Listing
As required

The Contractor shall deliver via email one (1) electronic copy of each deliverable to the designated persons listed below on the date it is due in Microsoft Office, Word 2002, PowerPoint 2002, or Project 2002 format, as appropriate, for the deliverables specified herein, whether verbally requested or not. Changes to delivery points of contact shall be issued to the Contractor by email notification. All deliverables shall be delivered no later than the date specified herein.

Offerors may download the solicitation and make hard copies of necessary items for submission. For their own records, offerors are responsible for downloading and making complete copies of the solicitation, the terms of which are incorporated in the contracts.

The Contractor shall deliver via email one (1) electronic copy of each deliverable to the designated persons listed below on the date it is due in Microsoft Office, Word 2002, PowerPoint 2002, or Project 2002 format, as appropriate, for the deliverables specified herein, whether verbally requested or not. Changes to delivery points of contact shall be issued to the Contractor by email notification. All deliverables shall be delivered no later than the date specified herein.

C.2 POINT OF CONTACTS AND RESPONSIBILITIES

Contracting Officer’s Representative (COR): The COR will oversee the Contractor’s technical efforts to assure that its performance is in accordance with the terms and conditions of the contract. The COR will be designated after award.

Contracting Officer (CO): A person with the authority to enter into, administer, and/or terminate contracts and make related determinations and findings. The CO is the only individual authorized to make changes to the terms and conditions of the contract. The CO is Laurel Weiskopf and can be reached at (703) 605-5721 or laurel.weiskopf@gsa.gov.

C.3 WEEKLY STATUS REPORTS

WEEKLY VENDOR STATUS SUBMISSION

REQUIREMENTS

GSA Office of Motor Vehicle Management’s contracts requires vendors to submit electronic status reports on a weekly cycle which indicate the production status of all vehicles ordered.

Status information sent electronically to GSA by your firm is displayed in our on-line ordering program, AutoChoice. Customers can view the production, shipment and actual delivery status of orders placed against your contract.

Additionally, the status report will also be used to calculate your on-time shipment performance against the contract time of shipment. The customer will be able to view the percentage of vehicles shipped on time by each vendor in AutoChoice. It is an avenue for customer agencies to evaluate the vendor’s performance when making a best value decision when selecting a vehicle.

Your file can be sent in either of the following two formats which are attached:

1. XLS: Send data as an EXCEL file via an email attachment to AutomotiveEDI.Partnerships@gsa.gov

2. EDI: Data collection is in X12 format (870 transaction set version 3010). Please contact Terry Koniarski at 703-605-9505 for further information in this electronic data interchange.

AUTOCHOICE STATUS Record Layout (870)

Name of Field

EXCEL File Column
Text

File Location

Field Length
Alpha or Numeric Field

Option Relationship (see Legend on Page 4)

Description
A
1-38
38
AN
O
N1
Vehicle Order Number (VON )
B
39-46
8
N
M
N2
Vehicle Identification Number (VIN)
C
47-63
17
AN
O
N3
Filler
D
64-70
5

Do NOT fill!

Contract
E
71-75
5
AN
M
Filler
F
76-87
11

Do NOT fill!

Case Number
G
88-93
5
AN
M
Filler
H
94-115
26

Do NOT fill!

Name
I
116-150
35
AN
O
N3
Address
J
151-185
35
AN
O
N3
City
K
186-215
30
AN
O
N3
State
L
216-217
2
A
O
N3, N4
Zip
M
218-227
10
AN
O
N3, N5
Status
N
228-229
2
AN
M
N6
Status Date
O
230-239
10
AN
O
N7
Filler
P
240-241
2

Do NOT fill!

Contact Person
Q
242-276
35
AN
O
N3
Filler
R
277-278
2

Do NOT fill!

Contact Telephone Number
S
279-299
21
AN
O
N3
Filler
T
300-303
4

Do NOT fill!

Requisition Interface Record Layout Relationship Edits (Legend)

N1 : Description of vehicle

N2 : An Integer representing vehicle number – ex. If three vehicles are attached to one case, each vehicle would have a VON number of 1, 2, 3

N3 : For Dealer Delivery, enter Dealership name, location, and point-of-contact.

For CNS Delivery, put Customer delivery location and point-of-contact.

N4 : Must be a valid US State, Territory, or Armed Forces abbreviation or “XX” for Foreign Countries.

See the USPS official list of State Abbreviations (including territories and Armed Forces addresses) at http://www.usps.com/ncsc/lookups/abbreviations.html#states

N5 : Zip Codes are validated against the state field. Required unless “XX” is in the state field.

N6 : Valid status codes:
SP – Scheduled for Production

IN – In Process

AN – Available Now, No Shipping Schedule

CC – Shipped

DD – Actual Delivery Date

DE – Order Cancelled

N7 : Date format is YYYY-MM-DD

General Comments:

1. The ROADS Status Batch File transmitted to the Automotive Center will be an ASCII file (flat file) with a fixed Length of 303 bytes (records).

2. Column Option: O = Optional Field and M = Mandatory Field.

3. Initialize all Bytes in Filler Field with “blank spaces”.

C.4 WHEELS-OFF-GROUND DELIVERY

The vehicle shall be processed for shipment from the manufacturer’s plant to the initial receiving activity, in accordance with the manufacturer’s standard commercial practice.

Where individual items are referenced to this paragraph, the delivery method used shall assure that all wheels of subject vehicles are off the ground at all times while in transit from the point of final assembly (vehicle complete as specified) to the destination indicated under the item description. (If vehicles are shipped by rail, the “wheel-off-ground delivery” delivery method is required to a geographical point not more than 100 road miles from the specified under the item description.) .

For the purpose of complying with delivery mileage restrictions in this solicitation where so specified under the item, the road mileage between geographical points shall be as stated in “Household Goods Carriers’ Bureau Mileage Guide”, or “Rand McNally Road Atlas”, latest issue in effect.

The warranty begins when the Government accepts the vehicle from the contractor FOB point of delivery destination.

C.5 IDENTIFICATION OF VEHICLES

The contractor must show the applicable GSA Purchase Order number on the carrier’s freight bill or other document used in the delivery of vehicles awarded f.o.b. destination under this solicitation. This information is essential to the consignee for identification purposes. Vehicles will not be accepted by the Government without this identifying number.

Contractor’s Monroney label is also acceptable, if it provides all of the required data.

C.6 DEALER DELIVERY REQUIREMENT

A. DEALER DELIVERY

Unless direct (consignee) delivery (Indicated by Option Code “CNS”) is noted on a motor vehicle delivery order, delivery shall be made to an available product dealer within the geographical radius (specified below) to the destination for the item specified in the schedule of items or as designated on the delivery order.

(1) For populated areas of 100,000 or more, the product dealer shall be no farther than 25 miles from the destination specified. In the event more than one product dealer is indicated to serve one destination, the additional dealer(s) utilized by the Contractor shall not be in excess of 25 miles from the specified location.

(2) For populated areas of fewer than 100,000, the product dealer shall be no farther than 150 miles from the specified location.

(3) If a destination is found to be in excess of 100 miles from a product dealer the Contractor shall notify the Government within 30 days after receipt of delivery order so that the Government, at its option, may amend the delivery order to require consignee delivery.

(4) At the Government’s option, vehicles may be delivered directly to a Government-specified location which is certified by the contractor as a warranty repair location. The Government will receive and prep the vehicles in the same manner as a dealership. When ”Consignee delivery” is notated on the delivery order, the unit price of the vehicle will be reduced by $150 to cover charges for new vehicle preparation normally paid to a dealership. There will be no additional charge to the Government for such items as “Consignee delivery” in these cases.

(Example – Kennedy Space Flight Center FMC)

(5) The Government, upon contract award, will approve the contractor’s Dealer’s Layout and will make the participating courtesy dealerships available in Autochoice. The Contractor shall notify the Government when there are changes to the Dealer’s Layout within two weeks of such change.

(6) When the contractor receives a delivery order and the destination is not on the “Dealer’s Layout”, the contractor shall choose a dealer location within the geographic radius specified above. Every 2 weeks, the Contractor shall furnish the Contracting Officer a list of dealer locations where the destination is not on the Dealer’s Layout and the corresponding delivery order of the vehicles being delivered.

NOTE: ALL ORDERS PLACED PURSUANT TO THE ABOVE WILL BE RESTRICTED TO DESTINATIONS WITHIN THE CONTINENTAL UNITED STATES (CONUS); ANCHORAGE AND FAIRBANKS, ALASKA; HONOLULU, HAWAII; AND HATO REY, PUERTO RICO.

B. THE FOLLOWING SERVICES SHALL BE REQUIRED FROM THE PRODUCT DEALER:

(1) RECEIPT AND INSPECTION OF NEW VEHICLE. Product dealer shall receive new vehicle from carrier and inspect the vehicle for carrier damage.

(2) CARRIER CLAIMS. When necessary, product dealer shall prepare and process claims against the carrier.

(3) REPAIR/REPLACEMENT. Product dealer shall make any repairs necessitated by carrier damage and shall replace any equipment lost in transit.

(4) PREDELIVERY SERVICING. Product dealer shall perform predelivery servicing in accordance with the manufacturer’s recommended predelivery service procedures.

(5) NOTIFICATION TO GOVERNMENT. Product dealer shall notify the designated Government official upon receipt of new vehicle(s).

(6) TRANSFER TO GOVERNMENT. All new motor vehicles received shall be picked up at the Product Dealer’s location by Government personnel within five (5) days after notification. All vehicles shall remain the responsibility of the Contractor until inspected, accepted, and transferred to the Government.

C. None of the above shall be construed as creating contractual privity between the General Services Administration and the Product Dealer.

C.7 SHIPMENT DELAYS

If vehicles are not produced, inspected and shipped in accordance with the contract time of shipment, they are deemed late. The contractor is required to advise the Government of the delay a minimum of 30 days prior the shipment date and establish a new shipment date and offer concession to the Government to remove the vehicle(s) from default status. The concession is the monthly lease rate established by GSA Fleet for the current model year. The lease rate may be found via www.gsa.gov/gsafleet. In accordance with FAR 52.212-4(f), concessions will not be required for delays that are beyond the reasonable control and without the fault or negligence of the contractor or subcontractor. None of the aforementioned shall be regarded as an extension, waiver, or abandonment of the delivery schedule or a waiver of the Government's right to terminate for cause.

C.8 NOTIFICATION OF VEHICLE DEFECTS

For vehicles delivered under this contract, any notification of defects required by Public Law 89-563 shall be addressed to the consignee unless the Contractor is otherwise notified pursuant to FPMR 101-26.501.

C.9 PUBLIC LAW 94-163 (SECTION 510)

For purposes of Government conformance to the provisions of Public Law 94-163 (Section 510) and for no other purposes, offerors are requested to furnish the following information for each vehicle type on which proposals are submitted: Make, Model, Engine cubic inch displacement, Carburetor type (Number of Barrels or Fuel Injection), and Transmission (Automatic or Manual).

This information may be inserted in the spaces provided under the “Additional Requirements” provision of this solicitation or as an attachment to the proposal, but in any event must be identified to the applicable solicitation item number(s).

C.10 AVAILABILITY OF FUNDS

The Government anticipates making an award on all items and in the quantities specified in the Schedule of Items. However, the actual quantity of vehicles to be awarded under this solicitation is estimated and subject to the availability of funds.

C.11 GUARANTEED MINIMUM QUANTITY

The minimum quantity of supplies that the Government guarantees to order during the period of this contract is quantity of one (1) unit. If at the end of the contract period (base period with three 1 year options to renew), the vendor has not received an order; upon request the Government will pay the contractor the dollar amount of the lowest current model year base vehicle that was awarded under contract.

(a)Request for payment of any amount due under this clause shall be submitted, in writing, to the Contracting Officer within 30 days after the end of the contract period.
(b)The guaranteed minimum does not apply if the contract is terminated for cause or if the Contractor has not performed in accordance with the terms and conditions of the contract.

C.12 EVIDENCE OF SHIPMENT OF MANUALS

The Contractor shall furnish to the Contracting Officer evidence of shipment or mailing of Parts and Service Manuals required under this contract. This evidence shall consist of a copy of the transmittal letter (if used) or other written paper identifying the contract, agency and GSA case numbers; and shall show the manuals shipped, the addressee, date and method of shipment; and shall be forwarded as indicated above within 24 hours of the date of shipment or mailing. Such evidence need not be furnished for manuals shipped within the vehicles.

C.13 ADMINISTRATIVE FEE

The Government reserves the right to assess a $150 administrative fee for each Contractor-initiated modification (e.g., request an extension from the original shipment times).

C.14 GSA FORM 1611

GSA Form 1611 is required to be completed for any orders destined outside of the United States for which an established delivery code is not available. Instructions for form completion and delivery instructions are contained on the form.

C.15 CONTRACT ADMINISTRATION INFORMATION

A. POINTS OF CONTACT:

Contracting Officer:Laurel Weiskopf
2200 Crystal Drive, Suite 1006

Arlington, VA 22202

(703) 605-5580 or laurel.weiskopf@gsa.gov

Contract Specialist:Dallas Brewer
2200 Crystal Drive, Suite 1006

Arlington, VA 22202 (703)605-2685 or dallas.brewer@gsa.gov

Contract Specialist Joseph Continetti 2200 Crystal Drive, Suite 1006 Arlington, VA 22202 (703)605-2763 or joseph.continetti@gsa.gov

Administrative Contracting Officer: TBD at contract award

Contracting Officer's Representative (COR): TBD at contract award

The COR is not authorized to make any commitments or changes that will affect price, quality, quantity, delivery or any other terms and conditions of the contract. The COR, however, will be permitted to make changes to color, consignee, mailing addresses, email addresses, telephone/fax number, and points of contacts as delegated. On award, the Contractor will be provided a delegation letter from the Contracting Officer for its signature and files.

B. INVOICE SUBMISSION

Invoices shall include the following information:

· Name of vendor;

· Invoice date;

· Government contract number, case number, or motor vehicle delivery order number, or other authorization for delivery of goods or services;

· Vendor invoice number, account number, and/or any other identifying number agreed to by contract;

· Description (including, for example, contract line/subline number), price, and quantity of goods and services rendered;

· Shipping and payment terms;

· Taxpayer Identifying Number (TIN);

· Banking information;

· Contact name (where practicable), title and telephone number.

Where to send an invoice (mailed)

General Services Administration Financial Operations & Disbursement Branch (BCEB) P.O. Box 419279 Kansas City, MO 64141

Electronic Invoicing website (VSS) http://vss.gsa.gov/

C.16 VEHICLE AVAILABILITY LISTING (VAL)

Customer agencies are able to order vehicles up until the time Contractors notify GSA that vehicles are no longer available, The Contractor is advised, however, that AutoChoice remains open year round for orders to be placed, subject to availability. The Contractor shall notify GSA of the time that vehicles are no longer available via a Vehicle Availability Listing (VAL). GSA will communicate the VAL to customer agencies.

The Contractor shall provide, at a minimum, a 2-week notice prior to its closing of any line items.

C.17 ADDENDUM TO THE SOLICITATION

The following attachments are included:

Attachment No.
Description
A
Schedule of Items (see Section B5)
B
Small Business Subcontracting Plan
C
Proposal Checklist
D
Exceptions Spreadsheet
E
AutoChoice Online Ordering Procedures
F
Federal Standard 122BC
G
Federal Standard 307AP
H
Dealer’s Layout
I
Option Analysis Report
J
Form 1449

C.18 – NEXT MODEL YEAR

The GSA desires the flexibility to order vehicles defined in this contract without interruption during the period of contact performance. Recognizing there are periods in which our ability to order vehicles is delayed or prevented due to (OEM) Original Equipment Manufacturers and their representative dealers business plans, model change over, production delays or even cancellations, the GSA has created a new option code to mitigate the adverse impact on its customers. The code (NMY) Next Model Year is intended to bridge these performance gaps to facilitate an uninterrupted supply of vehicles to the GSA.

The NMY option will allow OEM and their representative dealers to provide price, availability and delivery information to the GSA for all vehicle models listed in the current schedule that may be subject to a new model year carry over from the previous model year. The GSA, the OEM and their representative dealers recognize the conflicts between production cycle calendars, budget or fiscal calendars and the actual calendar of days. This NMY offers a means by which the GSA, the OEM and their representative dealers can manage their expectations of performance, market orders and purchase price during the production model change cycle.

Acceptance of the NMY Option Code is to be part of the initial proposal submission for all OEM and their representative dealers to the GSA. IF this option was not offered at the time of the initial proposal, and is not part of the subsequent contact to sell to the GSA, the OEM and their representative dealers shall submit its NMY option price schedule to the GSA no later than 6:00 PM EST/EDST on March 31st of the current model year, and to disclose their planned date to close acceptance of orders for vehicle production in the current model year for all vehicle lines on contract to the GSA. This process will afford the GSA sufficient time to publish notice to its customers facilitating order submission prior to the current model year production end date.

Any orders received after the announced closing date of the current model year production, the following NMY Option shall be utilized.

The information to be submitted to the GSA Office of Acquisitions shall include the following:

1. The contract number.

1. Line item, noun name of the subject.

1. The date current model production will cease.

1. The final date orders must be received for production scheduling in the current model year.

1. The effective date of the start of NMY Next Model Year production.

1. Next Model Year price offer in USD (United States Dollars) by vehicle offering, class or name.

1. Next Model Year price specific cost detail (increase or decrease) for line item by vehicle offering, class or name.

1. Any new option codes created, and their potential conflicts (collision) due to incorporation of previously optional equipment that is now standard equipment in the NMY offer.

1. The cost basis detail for the increase or decrease in price.

1. The price for the NMY option shall extend through the end of the existing period of performance of the contract.

1. OEM and their representative dealers shall certify that NMY vehicle(s) comply with all current Federal Standards governing the sale and use of motor vehicles.

SECTION D – CONTRACT CLAUSES AND PROVISIONS

D.1 52.212-3 Offeror Representations and Certifications—Commercial Items (AUG 2009) An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (m) of this provision.

(a) Definitions. As used in this provision— “Emerging small business” means a small business concern whose size is no greater than 50 percent of the numerical size standard for the NAICS code designated.

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Inverted domestic corporation” means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in Federal Supply Classes (FSC) 1000-9999, except—

(1) FSC 5510, Lumber and Related Basic Wood Materials;

(2) Federal Supply Group (FSG) 87, Agricultural Supplies;

(3) FSG 88, Live Animals;

(4) FSG 89, Food and Related Consumables;

(5) FSC 9410, Crude Grades of Plant Materials;

(6) FSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) FSC 9610, Ores;

(9) FSC 9620, Minerals, Natural and Synthetic; and

(10) FSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Veteran-owned small business concern” means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern—

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

(b)

(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the Online Representations and Certifications Application (ORCA) website.

(2) The offeror has completed the annual representations and certifications electronically via the ORCA website at http://orca.bpn.gov. After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications—Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________.

[Offeror to identify the applicable paragraphs at (c) through (n) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.]

(c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it o is, o is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it o is, o is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it o is, o is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, for general statistical purposes, that it o is, o is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it o is, o is not a women-owned small business concern.

Note: Complete paragraphs (c)(6) and (c)(7) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it o is a women-owned business concern.

(7) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________________________________

(8) Small Business Size for the Small Business Competitiveness Demonstration Program and for the Targeted Industry Categories under the Small Business Competitiveness Demonstration Program. [Complete only if the offeror has represented itself to be a small business concern under the size standards for this solicitation.]

(i) [Complete only for solicitations indicated in an addendum as being set-aside for emerging small businesses in one of the designated industry groups (DIGs).] The offeror represents as part of its offer that it o is, o is not an emerging small business.

(ii) [Complete only for solicitations indicated in an addendum as being for one of the targeted industry categories (TICs) or designated industry groups (DIGs).] Offeror represents as follows:

(A) Offeror’s number of employees for the past 12 months (check the Employees column if size standard stated in the solicitation is expressed in terms of number of employees); or

(B) Offeror’s average annual gross revenue for the last 3 fiscal years (check the Average Annual Gross Number of Revenues…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .