Posting_A1_-_Admin_Requirements__IFB__1PA6V92126.pdf
PDF 187 KB Posted
- Attached to
- IFB 1PA6V92126 CZU Flashover Simulator
- Solicitation number
- 0000040544
- Issued by
- California
About this file
This document is the Administrative Requirements attachment for an Invitation for Bid (IFB) issued by the California Department of Forestry and Fire Protection (CAL FIRE) for a Flashover Simulator to support operations at the Ben Lomond Camp Training Center in Santa Cruz, California. Bidders must submit complete descriptive literature including sales quotes with quantities, totals, and itemized descriptions confirming no services are included. Delivery is preferred within four months of contract award, with all actions including assembly, installation, and inspection to be completed within ten weeks. The contractor must contact the designated contact person, Ryan Johnson, at least two weeks prior to delivery to arrange logistics. Delivery shall occur during normal business hours (Monday-Friday, 8:00 a.m. to 3:00 p.m. PT) at the specified Santa Cruz location. Partial deliveries and partial payments are permitted following CAL FIRE inspection and acceptance of goods.
CAL FIRE reserves the right to reject any goods that deviate from specified requirements, which may result in contract termination at no cost to the state, including all manufacturing and shipping costs. The awarded bidder bears full responsibility for warranty compliance and must provide manufacturer's warranties at delivery, with the manufacturer required to respond to warranty claims within one business day and dispatch a factory representative for workmanship issues. All repair, labor, and transportation costs for defects occurring within the warranty period are the contractor's responsibility at no cost to the state. Payment is initiated upon receipt and acceptance of each unit, with invoices required to include correct costs matching the purchase order, proper PO information, contractor letterhead, and designation as an invoice. Invoices should be submitted to the specified billing address in Felton, California, either via email or physical mail.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| calfire720.docx | DOCX document | |
| Agreement_Cover_Letter.pdf | ||
| CalRecycle_Form_74.pdf | ||
| Posting_A4_-_SPECIFICATIONS_IFB__1PA6V92126.pdf | ||
| Posting_IFB__1PA6V92126.pdf | ||
| Bidder_Declaration_Form.pdf | ||
| CALIFORNIA_CIVIL_RIGHTS_LAWS_ATTACHMENT.pdf | ||
| Posting_A3_-_NARRATIVE_RESPONSE_IFB__1PA6V92126.pdf | ||
| Posting_A2_-_COST_WORKSHEET_IFB__1PA6V92126.xlsx | XLSX spreadsheet | |
| std204.pdf | ||
| std205.pdf |
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATE OF CALIFORNIA - NATURAL RESOURCES AGENCY Gavin Newsom, Governor
DEPARTMENT OF FORESTRY AND FIRE PROTECTION
P.O. Box 944246
SACRAMENTO, CA 94244-2460
(916) 653-7772
Attachment #1 Administrative Requirements
SCOPE
The administrative requirements described herein shall make up part of the minimum requirements for the attached Invitation for Bid package and outline the acceptance process after a PO has been issued. In addition to meeting all technical requirements as outlined in the specification, Bidders shall also meet any administrative requirements listed herein.
Each bid package shall constitute a single bid that meets the specifications. A single bid package with multiple bids that were not requested shall have all bids in the bid package voided.
DESCRIPTIVE LITERATURE
Bidder shall submit complete descriptive literature with the bid and are to note their brand name and catalog or model number. Descriptive literature shall be annotated to specify the applicable page, brand, model, and item(s).
For this bid, descriptive literature shall be in the form of a complete sales quote, identifying quantities, totals, and description of goods confirming no services are being included in the bid.
FAILURE TO SUBMIT DESCRIPTIVE LITERATURE BY THE BIDDER, MAY BE CONSIDERED
NON-RESPONSIVE AND NOT ACCEPTED.
DELIVERY
Delivery timelines can be changed if both the Department of Forestry and Fire Protection (CAL FIRE) and the Awarded Bidder agree. Approval for extensions will be carried out using the Amendment Process, with the creation of an Amendment by CAL FIRE. The Awarded Bidder will discuss adjusted delivery dates with the receiving CAL FIRE unit and the Business Service Office (BSO), after receiving approval, can proceed with the approved changes. The approved Amendment will be incorporated into the order.
Delivery shall be made to the below delivery address during normal business hours Monday through Friday from 8:00 a.m. to 4:00 p.m. except State Holidays.
Delivery Location: Contact Person Ben Lomond Camp Training Center Ryan Johnson 13575 Empire Grade Work Phone: (831) 254-1753 Santa Cruz, CA 95060-9455 Email: Ryan.Johnson@fire.ca.gov mailto:Ryan.Johnson@fire.ca.gov
IFB 1PA6V92126
Flashover Simulator
CAL FIRE
10/12/2026
Delivery is preferred to be completed in full within 4 months of contract award. All actions including delivery, assembly, installation, and inspection, are preferred to be completed within 10 weeks of contract award.
CAL FIRE reserves right to review alternative time-frames submitted with a respective bid for evaluative purposes.
Contractor shall contact Ryan Johnson at least two (2) weeks prior to delivery to make delivery arrangements. Delivery shall be made during normal business hours: Monday – Friday from 8:00 am (PT) – 3:00 pm (PT), except on official state holidays.
Acceptance of goods upon delivery does not exempt manufacturer from liability for any major defects or inherently problematic design.
PARTIAL DELIVERIES
Partial deliveries will be accepted, and partial payments will also be allowed after receipt, inspection, and acceptance of goods by the California Department of Forestry and Fire (CAL FIRE)
INSPECTION AND ACCEPTANCE
Inspection will be done at the time of delivery at the final destination by CAL FIRE inspector(s).
Completion of inspection or acceptance by the State inspector shall in no way release the dealer from satisfying the requirements of the contract, specifications, and warranty. The dealer shall correct deviations from the specified requirements that are detected by the owning agency in an expeditious manner at no expense to the owning agency.
Any unsatisfactory materials or evidence of faulty workmanship shall be removed and replaced or corrected by and at the expense of the manufacturer. Failure to find faulty materials or workmanship at inspection times does not release the manufacturer of responsibility for said faulty materials or workmanship.
REJECTION
As previously mentioned, the awarded bidder shall deliver goods that is in compliance to the listed specifications of the bid package. Material deviations not previously discussed and agreed to, from the listed specifications of the bid package, may result in rejection of the goods by CAL FIRE.
CAL FIRE reserves right to reject goods that are non-compliant with specifications of the bid package.
Rejection of the goods may result in contract termination at no cost to the state, including manufacturing costs and shipping/delivery costs.
CAL FIRE will provide written notice to the supplier that goods have been rejected by CAL FIRE due to non-compliance of the goods to listed specifications of the bid package.
Final acceptance of the goods and final payment by the State does not release supplier from specifications, requirements, and warranty under contract. Supplier is liable for goods’ compliance to specifications and warranty, including after final payment is made.
WARRANTY
Copies of the manufacturer's warranties (including purchased goods) shall be provided at the time of delivery.
Goods, electronics, and miscellaneous shall include manufacturers’ standard warranties. The manufacturer or their authorized dealer shall respond to warranty requests within one (1) business day of report of a failure from CAL FIRE and shall dispatch a factory representative to address any workmanship-related issues.
Manufacturer must have a Warranty Service provider. Contractor shall bear all material, labor and transportation costs for repair or defects as well as failures occurring within the warranty period.
Warranty shall include all mechanical and electrical parts and labor for machine goods. Warranty shall not include items depreciated through standard wear. Costs of mechanic and electrical parts and labor shall be included at no cost to the State.
All products offered must conform to the warranty language identified in the General Provisions,
05. Warranties & Representations.
PAYMENT
Process for payment will be initiated on each unit as units are received and deemed acceptable or when a valid invoice is received, whichever is later. A valid invoice is one that has the correct costs that match the PO, has the PO information on the document, is on the Contractor’s letterhead, and says “Invoice”. If there is a discount period, it will start after the final acceptance of each unit on the PO. Unless otherwise specified, invoice(s) shall be sent to the address set forth herein.
The invoice shall be printed on the supplier’s letterhead.
CAL FIRE’s Ship-To and Bill-To address for the purpose of this bid shall be listed on the invoice as:
Ship To:
Ben Lomond Camp Training Center 13575 Empire Grade Santa Cruz, CA 95060-9455
Bill To:
CAL FIRE San Mateo–Santa Cruz Unit (CZU) 6059 Highway 9 Felton, CA 95018 Attention To: CZU Finance
Invoice(s) and any applicable payment documentation shall either be:
• Emailed to Ryan.Johnson@fire.ca.gov
• Physically mailed to 6059 Highway 9, Felton, CA 95018
• Attention: Ryan Johnson
Bidder Certification:
Please certify that you have received all four (4) pages of this document and that you have reviewed and agree to the requirements, terms, and conditions within by signing below and returning all pages with bid submission.
Printed Name
Signature
Date mailto:Ryan.Johnson@fire.ca.gov
File details come from the government source that posted it. Updated .