Nemco-Propylene-Glycol-UninhibitedUndyed-EnglishSDS_2022.pdf

SAFETY DATA SHEET

1. Identification

Propylene Glycol, Uninhibited/UndyedProduct identifier

0684-RMOther means of identification

Non-toxic industrial heat transfer fluidRecommended use

Not for food, drug, or household use.Recommended restrictions

Manufacturer/Importer/Supplier/Distributor information

Manufacturer

Nemco Resources Ltd

Address 25 Midland Street

Company name

Website

Telephone Phone: 204-788-1030

Fax: 204-788-1593

Toll Free: 855-755-6737 (M-F 8am-4:30pm)

Emergency phone number NEMCO: 855-755-6737 (M-F 8am-4:30pm)

E-mail

Canada www.nemco.ca/msds-safety-information info@nemco.ca

Winnipeg, MB R3E 3J6

See above.Supplier

2. Hazard identification

Not classified.Physical hazards

Not classified.Health hazards

Not classified.Environmental hazards

Label elements

None.Hazard symbol

Signal word None.

Hazard statement The mixture does not meet the criteria for classification.

Precautionary statement

Prevention Observe good industrial hygiene practices.

Response Wash hands after handling.

Storage Store away from incompatible materials.

Disposal Dispose of waste and residues in accordance with local authority requirements.

Other hazards None known.

Supplemental information None.

3. Composition/information on ingredients

Mixtures

Non hazardous by WHMIS criteriaComposition comments

4. First-aid measures

If symptoms develop move victim to fresh air. If symptoms persist, obtain medical attention.Inhalation

Wash off with soap and water. Get medical attention if irritation develops and persists.Skin contact

Flush with cool water. Remove contact lenses, if applicable, and continue flushing. Obtain medical attention if irritation persists.

Eye contact

Rinse mouth. Do not induce vomiting. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration. Never give anything by mouth if victim is unconscious or is convulsing.

Obtain medical attention.

Ingestion

Direct contact with eyes may cause temporary irritation.Most important symptoms/effects, acute and delayed

Treat patient symptomatically.Indication of immediate medical attention and special treatment needed

#34951 Issue date 25-May-2022

AIAFZ0040,66,73

Page: 1 of 5

If you feel unwell, seek medical advice (show the label where possible). Show this safety data sheet to the doctor in attendance. Avoid contact with eyes and skin. Keep out of reach of children.

General information

5. Fire-fighting measures

Alcohol resistant foam. Powder. Carbon dioxide.Suitable extinguishing media

Do not use water jet as an extinguisher, as this will spread the fire.Unsuitable extinguishing media

During fire, gases hazardous to health may be formed.Specific hazards arising from the chemical

May include and are not limited to: Oxides of carbon.Hazardous combustion products

Self-contained breathing apparatus and full protective clothing must be worn in case of fire.Special protective equipment and precautions for firefighters

Move containers from fire area if you can do so without risk.Fire fighting equipment/instructions

Use standard firefighting procedures and consider the hazards of other involved materials.Specific methods

No unusual fire or explosion hazards noted.General fire hazards

6. Accidental release measures

Keep unnecessary personnel away. For personal protection, see section 8 of the SDS.Personal precautions, protective equipment and emergency procedures

Use water spray to reduce vapours or divert vapour cloud drift. This product is miscible in water.

Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water.

Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.

Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.

Methods and materials for containment and cleaning up

Avoid discharge into drains, water courses or onto the ground. Do not discharge into lakes, streams, ponds or public waters.

Environmental precautions

7. Handling and storage

Wash thoroughly after handling. Observe good industrial hygiene practices. When using do not eat or drink.

Precautions for safe handling

Store in tightly closed container. Store away from incompatible materials (see Section 10 of the SDS). Keep out of reach of children.

Conditions for safe storage, including any incompatibilities

8. Exposure controls/Personal protection

No exposure limits noted for ingredient(s).Occupational exposure limits

No biological exposure limits noted for the ingredient(s).Biological limit values

Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

Appropriate engineering controls

Individual protection measures, such as personal protective equipment

Wear safety glasses with side shields (or goggles).Eye/face protection

Skin protection

Impervious gloves. Confirm with reputable supplier first.Hand protection

Wear suitable protective clothing. As required by employer code.Other

Where exposure guideline levels may be exceeded, use an approved NIOSH respirator.

Respirator should be selected by and used under the direction of a trained health and safety professional following requirements found in OSHA's respirator standard (29 CFR 1910.134), CAN/CSA-Z94.4 and ANSI's standard for respiratory protection (Z88.2).

Respiratory protection

Not applicable.Thermal hazards

Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. When using do not eat or drink.

General hygiene considerations

#34951 Issue date 25-May-2022

Page: 2 of 5

9. Physical and chemical properties

LiquidAppearance

Liquid.Physical state

Liquid.Form

ClearColour

OdourlessOdour

Odour threshold Not available.

pH

Melting point/freezing point

Initial boiling point and boiling range

Flash point

Evaporation rate

Not available.

-60°C (-76°F)

184°C (363.2°F)

98.0°C (208.4°F) Not available. Not applicable.Flammability (solid, gas)

Upper/lower flammability or explosive limits

Flammability limit - lower

Not available.

Flammability limit - upper

Not available.

Explosive limit - lower ( %) Not available.

Explosive limit – upper

Not available.

Vapour pressure Not available.

Vapour density 2.62 (Air = 1)

Relative density 1.03 g/cm3

Solubility(ies)

Solubility (water) Complete

Partition coefficient

(n-octanol/water)

Not available.

Auto-ignition temperature > 400 °C (> 752 °F)

Decomposition temperature Not available.

Viscosity 52 cSt

Other information

Not explosive.Explosive properties

Not oxidising.Oxidising properties

10. Stability and reactivity

The product is stable and non-reactive under normal conditions of use, storage and transport.Reactivity

Material is stable under normal conditions.Chemical stability

No dangerous reaction known under conditions of normal use.Possibility of hazardous reactions

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not mix with other chemicals.

Conditions to avoid

Strong oxidising agents. Acidic conditions. Alkaline materials.Incompatible materials

May include and are not limited to: Oxides of carbon.Hazardous decomposition products

11. Toxicological information

Information on likely routes of exposure

Inhalation No adverse effects due to inhalation are expected.

Skin contact No adverse effects due to skin contact are expected.

Eye contact Direct contact with eyes may cause temporary irritation.

Ingestion May cause stomach distress, nausea or vomiting.

Symptoms related to the physical, chemical and toxicological characteristics

Direct contact with eyes may cause temporary irritation.

#34951 Issue date 25-May-2022

Page: 3 of 5

Information on toxicological effects

Acute toxicity See below.

Prolonged skin contact may cause temporary irritation.Skin corrosion/irritation

Exposure minutes Not available.

Erythema value Not available.

Oedema value Not available.

Direct contact with eyes may cause temporary irritation.Serious eye damage/eye irritation

Corneal opacity value Not available.

Iris lesion value Not available.

Conjunctival reddening value

Not available.

Conjunctival oedema value Not available.

Recover days Not available.

Respiratory or skin sensitisation

Respiratory sensitisation Not a respiratory sensitizer.

This product is not expected to cause skin sensitisation.Skin sensitisation

No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic.

Germ cell mutagenicity

Carcinogenicity Not classified.

This product is not expected to cause reproductive or developmental effects.Reproductive toxicity

Specific target organ toxicity -single exposure

Not classified.

Specific target organ toxicity -repeated exposure

Not classified.

Aspiration hazard Not an aspiration hazard.

Chronic effects Not available.

Further information This product has no known adverse effect on human health.

12. Ecological information

Ecotoxicity Not available.

No data is available on the degradability of any ingredients in the mixture. Persistence and degradability

Bioaccumulative potential

No data available.Mobility in soil

Not available.Mobility in general

Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component.

13. Disposal considerations

Collect and reclaim or dispose in sealed containers at licensed waste disposal site.Disposal instructions

Dispose in accordance with all applicable regulations.Local disposal regulations

The waste code should be assigned in discussion between the user, the producer and the waste disposal company.

Hazardous waste code

Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see:

Disposal instructions).

Waste from residues / unused products

Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal.

Contaminated packaging

14. Transport information

Canada: TDG Proof of Classification: Classification Method: Classified as per Part 2, Sections

2.1 – 2.8 of the Transportation of Dangerous Goods Regulations. If applicable, the technical name and the classification of the product will appear below.

General

Transportation of Dangerous Goods (TDG - Canada)

Not regulated as dangerous goods.

#34951 Issue date 25-May-2022

Page: 4 of 5

15. Regulatory information

This product has been classified in accordance with the hazard criteria of the HPR and the SDS contains all the information required by the HPR.

Canadian federal regulations

Export Control List (CEPA 1999, Schedule 3)

Not listed.

Greenhouse Gases

Not listed.

Precursor Control Regulations

Not regulated.

WHMIS status Non-Hazardous

International regulations

Inventory status

Country(s) or region Inventory name On inventory (yes/no)*

YesCanada Domestic Substances List (DSL)

NoCanada Non-Domestic Substances List (NDSL)

*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)

16. Other information

X

HEALTH

FLAMMABILITY

PHYSICAL HAZARD

PERSONAL

PROTECTION

/LEGEND

4Severe

Moderate

Slight

Minimal

Serious

25-May-2022Issue date

25-May-2022Revision date

Version No. 01

For an updated SDS, please contact the supplier/manufacturer listed on the first page of the document.

Other information

The information in the safety data sheet was written by Dell Tech Laboratories Ltd.

(www.delltech.com) based on the best knowledge and experience currently available. Information contained herein was obtained from sources considered technically accurate and reliable. While every effort has been made to ensure full disclosure of product hazards, in some cases data is not available and is so stated. Since conditions of actual product use are beyond control of the supplier, it is assumed that users of this material have been fully trained according to the requirements of all applicable legislation and regulatory instruments. No warranty, expressed or implied, is made and supplier will not be liable for any losses, injuries or consequential damages which may result from the use of or reliance on any information contained in this document.

Disclaimer

Dell Tech Laboratories Ltd. Phone: (519) 858-5021Prepared by

#34951 Issue date 25-May-2022

Page: 5 of 5