Attachment_6_Hazardous_Materials_Survey_Building_728_Redacted.pdf

KELSAY

Environmental Consulting

503 705-0514 CCB#196361 3693 SE Francis St.

bradkelsay@comcast.net ESB #8683 Portland, Oregon 97202

April 20, 2015

Bryan Playle 612 E Reserve Street Vancouver, WA 98661

RE: Hazardous Materials Survey 728 Hathaway Road Building, Vancouver, Washington

At your request, Kelsay Environmental performed hazardous material survey at the property located at 728 Hathaway Road in Vancouver, Washington. The survey was conducted on April 14th, 2015 and was performed to facilitate renovation of the old barracks structure. The structure onsite consisted of a large wood framed structure with a central hall and rooms on either side of the hall. The building also had a safe room that has a suspect asbestos door on the outside and the room was framed in concrete as was the boiler room that was below the main level of the building. The crawlspace at the site had suspect piping from the boiler room system.

Seventeen suspect materials were collected from throughout the structure they include: gypsum wallboard/joint compound (2 types), lay-in ceiling tiles vinyl tile/mastic (3 types), window glazing, covebase/mastic (2 types), CMU mortar, brick mortar, magnesia pipe insulation and composition roofing shingles.

Only the magnesia pipe insulation tested positive for asbestos. Prior to demolition or renovation, asbestos-containing building materials are required to be removed by a certified abatement contractor per Labor and Industries and WISHA regulations. No other suspect asbestos-containing building materials were observed. The following Table summarizes positive materials their quantities and estimated abatement cost.

Kelsay Environmental conducted a lead paint investigation, a representative screening for the presence of lead paint consisting of 2 paint chip samples. Paint sampling was performed to assess the hazard and not all surfaces were sampled. The exterior sample tested positive for paint at around 31,471 ppm lead content. Sample results are listed below in Table 3.

Please find the attached tables and lab results. Should you have questions or need anything further please call me at 503-705-0514.

Sincerely, Brad Kelsay Project Manager

Attachments: Tables 1-3

Laboratory Results/Chain of Custody mailto:bradkelsay@comcast.net

503 705-0514 CCB#196361 3693 SE Francis St.

bradkelsay@comcast.net ESB#8683 Portland, Oregon 97202

Mr. Bryan Playle Re: 728 Hathaway E, Vancouver

Table I

ASBESTOS FINDINGS/QUANTITIES/COST ESTIMATE

Material Description Location Qty Observed

Cost to Abate

Magnesia Pipe Insulation Crawlspace and Radiator Walls 700 SF

Subtotal

Contingency 10%

Clearance Air Monitoring 1 Day

Total Abatement 728 Hathaway Building

1. The above table has approximated quantities and contractors should field verify

2. Cost estimates were derived from experience, information from abatement contractors and the 2015 construction means.

503 705-0514 CCB#196361 3693 SE Francis St.

bradkelsay@comcast.net ESB#8683 Portland, Oregon 97202

Re: 728 Hathaway E, Vancouver April 20, 2015

TABLE 2

ASBESTOS SAMPLING INVENTORY

Sample No. Material Description Location Results

5555.01-001 4” Black Covebase/ Off-white mastic

Hallway near West Entry NAD

5555.01-002 4” Black Covebase/ Off-white mastic

Hallway near East Entry NAD

5555.01-003 12” Off-white Vinyl Tile I w/Black Mastic

East End of Building Hallway

NAD

5555.01-004 12” Off-white Vinyl Tile I w/Black Mastic

East End of Building Hallway

NAD

5555.01-005 12” Brown Vinyl Tile II /Yellow

East End of Building Hallway

NAD

5555.01-006 12” Brown Vinyl Tile II /Yellow

Hallway NAD

5555.01-007 12” Brown Vinyl Tile II /Yellow

Central Room North NAD

5555.01-008 12” Beige Vinyl Tile III /Yellow Mastic

South West Room NAD

5555.01-009 12” Beige Vinyl Tile III /Yellow Mastic

South West Room NAD

5555.01-010 CMU Mortar Hallway near East Entry NAD

5555.01-011 CMU Mortar East End of Building Hallway

NAD

5555.01-012 2x4’Lay-in Ceiling Tile and fiberboard

Bathroom NAD

5555.01-013 2x4’Lay-in Ceiling Tile South Central Room NAD

5555.01-014 Gypsum Wallboard/Joint Compound

South Central Room NAD

5555.01-015 Gypsum Wallboard/Joint Compound

North Central Room NAD

5555.01-016 Window Glazing I West Entry Exterior Window

NAD

5555.01-017 Window Glazing I South Central Window NAD

503 705-0514 CCB#196361 3693 SE Francis St.

bradkelsay@comcast.net ESB#8683 Portland, Oregon 97202

April 20, 24015

TABLE 2

ASBESTOS SAMPLING INVENTORY (Cont)

Sample No. Material Description Location Results

5555.01-018 6” Black Cove/Yellow Mastic

Southwest Room NAD

5555.01-019 Blown-in White Attic NAD

5555.01-020 Tarpaper lined Gypsum Wallboard and blown-in insulation

Boiler Room NAD

5555.01-021 Grout on Brick Flue Boiler Room NAD

5555.01-022 Mortar Brick Walls Boiler Room NAD

5555.01-023 Mortar Brick Walls Boiler Room NAD

5555.01-024 Composition Roofing Shingle

Roof

5555.01-025 Composition Roofing Shingle

Roof

5555.01-026 Tarpaper lined Gypsum Wallboard and blown-in insulation

Boiler Room NAD

5555.01-027 Magnesia pipe Crawlspace 20% Chrysotile 5% Amosite

5555.01-028 Accordion Temp Wall Northeast Room NAD

NAD-No Asbestos Detected

503 705-0514 CCB#196361 3693 SE Francis St.

bradkelsay@comcast.net ESB#8683 Portland, Oregon 97202

LEAD INSPECTION SUMMARY

Two samples were collected for lead as a lead paint screening. Paint sampling was performed to assess the hazard and not all surfaces were sampled. Based upon the results all painted surfaces at the site should be presumed to contain some lead. A summary of the sample results are listed below in Table 3. All demolition/selective demolition must be performed in accordance with OSHA 1926.62 and WAC 296-155-176 requirements for the safe handling of lead-containing materials.

TABLE 3

LEAD PAINT CHIP SAMPLING INVENTORY

Sample No. Material Description Location Results (parts per million)

5555.01-1001

Off-white Exterior South Central Siding 31,471 ppm

5555.01-1002

Off-white Interior Central Room < 112 ppm*

* Less than sign indicates no lead was detected in the sample and the analytical sensitivity for the sample was the number associated.

> 1.0 mg/cm2 is considered lead based paint under EPA regulations.

PCB BALLAST/MERCURY INSPECTION

Poly Chlorinated Biphenyls (PCB) are a dielectric oil used in transformers, light ballasts and other electrical devices. PCB’s caused cancer and persist in the environment and must be disposed of under EPA guidelines.

A screening for PCB-containing ballasts was conducted. No PCB ballasts were found after inspecting a representative sampling. All ballasts to be removed should be verified to be Non-PCB before disposal. If PCBs are found to contain PCBs the must be disposed of per EPA- TSCA 40 CFR Ch.1 part 761.

All fluorescent light tubes (Approximately 170 light tubes) contain mercury and should be recycled and/or disposed observing regulations. Care should be taken to prevent breakage of the tubes during removal as vapors/gases will be released.

Attn:

Customer Project:

Reference #: Date: 4/17/2015

Analysis and Method

CA Labs

Dedicated to

Quality

Crisp Analytical, L.L.C.

1929 Old Denton Road Carrollton, TX 75006 Phone 972-242-2754 Fax 972-242-2798

CA Labs, L.L.C.

12232 Industriplex, Suite 32 Baton Rouge, LA 70809 Phone 225-751-5632 Fax 225-751-5634

Materials Characterization - Bulk Asbestos Analysis Laboratory Analysis Report - Polarized Light

Kelsay Environmental Brad Kelsay 3693 SE Francis St.

Portland, OR

Fort Vancouver 710 Building

CBR15041098

Summary of polarizing light microscopy (PLM / Stereomicroscopy bulk asbestos analysis) using the methods described in 40CFR Part 763 Appendix E to Subpart E (Interim and EPA 600 / R-93 / 116 (Improved). The sample is first viewed with the aid of stereomicroscopy. Numerous liquid slide preparations are created for analysis under the polarized microscope where identifications and quantifications are preformed. Calibrated liquid refractive oils are used as liquid mouting medium. These oils are used for identification (dispersion staining). A calibrated visual estimation is reported, should any asbestiform mineral be present. Other techniques such as acid washing are used in conjugation with refractive oils for detection of smaller quantities of asbestos. All asbestos percentages are based on calibrated visual estimation traceable to NIST standards for regulated of asbestos.

Traceability to measurement and calibration is achieved by using known amounts and types of asbestos from standards where analyst and laboratory accuracy are measured. As little as 0.001% asbestos can be detected in favorable samples, while detection in unfavorable samples may approach the detection limit of 0.50% (well above the laboratory definition of trace).

Labs

A

C

Discussion

Qualifications

Vermiculite containing samples may have trace amounts of actinolite-tremolite, where not found be PLM should be analyzed using TEM methods and / or water separation techniques. Suspected actinolite/vermiculite presence will be indicated through the sample comment section of this report.

Fibrous talc containing samples may even contain a related asbestos fiber known as anthophyllite. Under certain conditions the same fiber may actually contain both talc and anthophyllite (a phenomenon called intergrowth). Again, TEM detection methods are recommended. CA Labs PLM report comments will denote suspected amounts of asbestiform anthophyllite with talc, where further analysis is recommended.

Some samples (floor tiles, surfacings, etc.) may contain fibers too small to be delectable by PLM analysis and should be analyzed by TEM bulk protocols.

A "trace asbestos" will be reported if the analyst observes far less than 1% asbestos. CA Labs defines "trace asbestos" as a few fibers detected by the analyst in several preparations and will indicate as such under these circumstances.

Quantification of <1% will actually be reported as <=1% (allowable variance close to 1% is high). Such results are ideal for point counting, and the technique is mandatory for friable samples (NESHAP, Nov. 1990 and clarification letter 8 May 1991) under 1% percent asbestos and the "trace asbestos". In order to make all initial PLM reports issued from CA Labs NESHAP compliant, all <1% asbestos results (except floor tiles) will be point counted at no additional charge.

CA Labs is accredited by the National Voluntary Accreditation Program (NVLAP) for selected test methods for airborne fiber analysis (TEM), and for bulk asbestos fiber analysis (PLM). All analysts have a college degree in a natural science (geology, biology, or environmental science) or are recognized by a state professional board in one these disciplines .Extensive in-house training programs are used to augment education background of the analyst. The group leader of polarized light has received supplemental McCrone Research training for asbestos identification. This report is not covered by the scope of AIHA accreditation. Analysis performed at CA Labs, LLC 12232 Industriplex, Suite 32 Baton Rouge, LA 70809.

Baton Rouge NVLAP Lab Code 200772-0 TEM/PLM TDH 30-0370

LDEQ

Overview of Project Sample Material Containing Asbestos

Customer Project: Fort Vancouver 710 Building CA Labs Project #: CBR15041098

White Insulation

CA Labs

Dedicated to

Quality

Crisp Analytical, L.L.C.

1929 Old Denton Road Carrollton, TX 75006 Phone 972-242-2754 Fax 972-242-2798

CA Labs, L.L.C.

12232 Industriplex, Suite 32 Baton Rouge, LA 70809 Phone 225-751-5632 Fax 225-751-5634

Sample # Layer

Analysts Physical Description of Subsample

Asbestos type / calibrated visual estimate percent

List of Affected Building Material Types

5555.01- 027 1 White Insulation

20% Chrysotile 5% Amosite

Labs

A

C

Glossary of abbreviations (non-asbestos fibers and non-fibrous minerals):

Baton Rouge NVLAP Lab Code 200772-0 TEM/PLM TDH 30-0370

LDEQ

ca - carbonate gypsum - gypsum bi - binder or - organic ma - matrix mi - mica ve - vermiculite ot - other pe - perlite qu - quartz fg - fiberglass mw - mineral wool wo - wollastinite ta - talc sy - synthetic ce - cellulose br - brucite ka - kaolin (clay) pa - palygorskite (clay)

This report relates to the items tested. This report is not to be used by the customer to claim product certification, approval or endorsement by NVLAP, NIST, AIHA LAP, LLC, or any other agency of the federal government. This report may not be reproduced except in full without written permission from CA Labs. These results are submitted pursuant to CA Labs' current terms and sale, condition of sale, including the company's standard warranty and limitations of liability provisions and no responsibility or liability is assumed for the manner in which the results are used or interpreted. Unless notified in writing to return the samples covered by this report, CA Labs will store the samples for a period of ninety (90) days before discarding. A shipping or handling fee may be assessed for the return of any samples.

Polarized Light Asbestiform Materials Characterization

Customer Info: Attn: Customer Project:

4/17/2015 3 day 4/15/2015

Phone # Fax #

CA Labs

Dedicated to

Quality

Crisp Analytical, L.L.C.

1929 Old Denton Road Carrollton, TX 75006 Phone 972-242-2754 Fax 972-242-2798

CA Labs, L.L.C.

12232 Industriplex, Suite 32 Baton Rouge, LA 70809 Phone 225-751-5632 Fax 225-751-5634

Brad Kelsay CA Labs Project #:

Kelsay Environmental

Fort Vancouver 710 Building

CBR15041098

3693 SE Francis St.

Portland, OR Date:

Turnaround Time: Samples Received:

503-705-0514 Date Of Sampling:

Purchase Order #:

Sample # Com ment Layer

Analysts Physical Description of Subsample

Homo-geneo us (Y/N)

Asbestos type / calibrated visual estimate percent

Non-asbestos fiber type / percent

Non-fibrous type / percent

5555.01- 001 1 Black Cove Base Y None Detected 100% qu, ma

2 Tan Mastic Y None Detected 100% qu, bi

Labs

A

C

Laboratory Director

Chris Williams

5555.01- 002 1 Black Cove Base Y None Detected 100% qu, ma

2 Tan Mastic Y None Detected 100% qu, bi

5555.01- 003 1 Tan Floor Tile Y None Detected 100% qu, ca

2 Yellow Mastic Y None Detected 100% qu, bi

5555.01- 004 1 Tan Floor Tile Y None Detected 100% qu, ca

Baton Rouge NVLAP Lab Code 200772-0 TEM/PLM TDH 30-0370

LDEQ

Analysis Method: Interim (40CFR Part 763 Appendix E to Subpart E) / Improved (EPA-600 / R-93/116)

Preparation Method: HCL acid washing for carbonate based samples, chemical reduction for organically bound components, oil immersion for identification of asbestos types by dispersion attaining / becke line method.

ca - carbonate gypsum - gypsum bi - binder or - organic ma - matrix mi - mica ve - vermiculite ot -other pe - perlite qu - quartz fg - fiberglass mw - mineral wool wo - wollastinite ta - talc sy - synthetic ce - cellulose br - brucite ka - kaolin (clay) pa - palygorskite (clay) Approved Signatories:

Alicia Stretz Senior Analyst Analyst Alicia Stretz

1. Fire Damage significant fiber damage - reported percentages reflect unaltered fibers

2. Fire Damage no significant fiber damages effecting fibrous percentages

3. Actinolite in association with Vermiculite

4. Layer not analyzed - attached to previous positive layer and contamination is suspected

5. Not enough sample to analyze

6. Anthophyllite in association with Fibrous Talc

7. Contamination suspected from other building materials

8. Favorable scenario for water separation on vermiculite for possible analysis by another method

9. < 1% Result point counted positive

10. TEM analysis suggested

4/17/2015 3 day 4/15/2015

Phone # Fax #

CA Labs

Dedicated to

Quality

Crisp Analytical, L.L.C.

1929 Old Denton Road Carrollton, TX 75006 Phone 972-242-2754 Fax 972-242-2798

CA Labs, L.L.C.

12232 Industriplex, Suite 32 Baton Rouge, LA 70809 Phone 225-751-5632 Fax 225-751-5634

Brad Kelsay CA Labs Project #:

Kelsay Environmental

Fort Vancouver 710 Building

CBR15041098

3693 SE Francis St.

Portland, OR Date:

Turnaround Time: Samples Received:

503-705-0514 Date Of Sampling:

Purchase Order #:

Sample # Com ment Layer

Analysts Physical Description of Subsample

Homo-geneo us (Y/N)

Asbestos type / calibrated visual estimate percent

Non-asbestos fiber type / percent

Non-fibrous type / percent

2 Yellow Mastic Y None Detected 100% qu, bi

5555.01- 005 1 Brown Floor Tile Y None Detected 100% qu, ca

Labs

A

C

Laboratory Director

Chris Williams

2 Yellow Mastic Y None Detected 100% qu, bi

5555.01- 006 1 Brown Floor Tile Y None Detected 100% qu, ca

2 Yellow Mastic Y None Detected 100% qu, bi

3 Black Felt Backing Y None Detected 40% ce 60% qu, bi

5555.01- 007 1 Brown Floor Tile Y None Detected 100% qu, ca

Baton Rouge NVLAP Lab Code 200772-0 TEM/PLM TDH 30-0370

LDEQ

Analysis Method: Interim (40CFR Part 763 Appendix E to Subpart E) / Improved (EPA-600 / R-93/116)

Preparation Method: HCL acid washing for carbonate based samples, chemical reduction for organically bound components, oil immersion for identification of asbestos types by dispersion attaining / becke line method.

ca - carbonate gypsum - gypsum bi - binder or - organic ma - matrix mi - mica ve - vermiculite ot -other pe - perlite qu - quartz fg - fiberglass mw - mineral wool wo - wollastinite ta - talc sy - synthetic ce - cellulose br - brucite ka - kaolin (clay) pa - palygorskite (clay) Approved Signatories:

Alicia Stretz Senior Analyst Analyst Alicia Stretz

1. Fire Damage significant fiber damage - reported percentages reflect unaltered fibers

2. Fire Damage no significant fiber damages effecting fibrous percentages

3. Actinolite in association with Vermiculite

4. Layer not analyzed - attached to previous positive layer and contamination is suspected

5. Not enough sample to analyze

6. Anthophyllite in association with Fibrous Talc

7. Contamination suspected from other building materials

8. Favorable scenario for water separation on vermiculite for possible analysis by another method

9. < 1% Result point counted positive

4/17/2015 3 day 4/15/2015

Phone # Fax #

CA Labs

Dedicated to

Quality

Crisp Analytical, L.L.C.

1929 Old Denton Road Carrollton, TX 75006 Phone 972-242-2754 Fax 972-242-2798

CA Labs, L.L.C.

12232 Industriplex, Suite 32 Baton Rouge, LA 70809 Phone 225-751-5632 Fax 225-751-5634

Brad Kelsay CA Labs Project #:

Kelsay Environmental

Fort Vancouver 710 Building

CBR15041098

3693 SE Francis St.

Portland, OR Date:

Turnaround Time: Samples Received:

503-705-0514 Date Of Sampling:

Purchase Order #:

Sample # Com ment Layer

Analysts Physical Description of Subsample

Homo-geneo us (Y/N)

Asbestos type / calibrated visual estimate percent

Non-asbestos fiber type / percent

Non-fibrous type / percent

2 Yellow Mastic Y None Detected 100% qu, bi

5555.01- 008 1 Brown Floor Tile Y None Detected 100% qu, ca

Labs

A

C

Laboratory Director

Chris Williams

2 Yellow Mastic Y None Detected 100% qu, bi

5555.01- 009 1 Brown Floor Tile Y None Detected 100% qu, ca

2 Yellow Mastic Y None Detected 100% qu, bi

5555.01- 010 1 White Surfaced Gray Plaster N None Detected 100% qu, bi, ca

5555.01- 011 1 White Surfaced Gray Plaster N None Detected 100% qu, bi, ca

Baton Rouge NVLAP Lab Code 200772-0 TEM/PLM TDH 30-0370

LDEQ

Analysis Method: Interim (40CFR Part 763 Appendix E to Subpart E) / Improved (EPA-600 / R-93/116)

Preparation Method: HCL acid washing for carbonate based samples, chemical reduction for organically bound components, oil immersion for identification of asbestos types by dispersion attaining / becke line method.

ca - carbonate gypsum - gypsum bi - binder or - organic ma - matrix mi - mica ve - vermiculite ot -other pe - perlite qu - quartz fg - fiberglass mw - mineral wool wo - wollastinite ta - talc sy - synthetic ce - cellulose br - brucite ka - kaolin (clay) pa - palygorskite (clay) Approved Signatories:

Alicia Stretz Senior Analyst Analyst Alicia Stretz

1. Fire Damage significant fiber damage - reported percentages reflect unaltered fibers

2. Fire Damage no significant fiber damages effecting fibrous percentages

3. Actinolite in association with Vermiculite

4. Layer not analyzed - attached to previous positive layer and contamination is suspected

5. Not enough sample to analyze

6. Anthophyllite in association with Fibrous Talc

7. Contamination suspected from other building materials

8. Favorable scenario for water separation on vermiculite for possible analysis by another method

9. < 1% Result point counted positive

4/17/2015 3 day 4/15/2015

Phone # Fax #

CA Labs

Dedicated to

Quality

Crisp Analytical, L.L.C.

1929 Old Denton Road Carrollton, TX 75006 Phone 972-242-2754 Fax 972-242-2798

CA Labs, L.L.C.

12232 Industriplex, Suite 32 Baton Rouge, LA 70809 Phone 225-751-5632 Fax 225-751-5634

Brad Kelsay CA Labs Project #:

Kelsay Environmental

Fort Vancouver 710 Building

CBR15041098

3693 SE Francis St.

Portland, OR Date:

Turnaround Time: Samples Received:

503-705-0514 Date Of Sampling:

Purchase Order #:

Sample # Com ment Layer

Analysts Physical Description of Subsample

Homo-geneo us (Y/N)

Asbestos type / calibrated visual estimate percent

Non-asbestos fiber type / percent

Non-fibrous type / percent

5555.01- 012 1 White Surfacing Y None Detected 100% qu, bi

2 Brown Ceiling Tile Y None Detected 100% ce

Labs

A

C

Laboratory Director

Chris Williams

3 White Surfacing Y None Detected 100% qu, bi

4 Tan Ceiling Tile Y None Detected 20% fg 70% ce 10% qu, pe

5555.01- 013 1 White Surfacing Y None Detected 100% qu, bi, ca

2 Tan Ceiling Tile Y None Detected 20% fg 70% ce 10% qu, pe

5555.01- 014 1 Tan Surfaced White Compound N None Detected 100% mi, bi, ca

Baton Rouge NVLAP Lab Code 200772-0 TEM/PLM TDH 30-0370

LDEQ

Analysis Method: Interim (40CFR Part 763 Appendix E to Subpart E) / Improved (EPA-600 / R-93/116)

Preparation Method: HCL acid washing for carbonate based samples, chemical reduction for organically bound components, oil immersion for identification of asbestos types by dispersion attaining / becke line method.

ca - carbonate gypsum - gypsum bi - binder or - organic ma - matrix mi - mica ve - vermiculite ot -other pe - perlite qu - quartz fg - fiberglass mw - mineral wool wo - wollastinite ta - talc sy - synthetic ce - cellulose br - brucite ka - kaolin (clay) pa - palygorskite (clay) Approved Signatories:

Alicia Stretz Senior Analyst Analyst Alicia Stretz

1. Fire Damage significant fiber damage - reported percentages reflect unaltered fibers

2. Fire Damage no significant fiber damages effecting fibrous percentages

3. Actinolite in association with Vermiculite

4. Layer not analyzed - attached to previous positive layer and contamination is suspected

5. Not enough sample to analyze

6. Anthophyllite in association with Fibrous Talc

7. Contamination suspected from other building materials

8. Favorable scenario for water separation on vermiculite for possible analysis by another method

9. < 1% Result point counted positive

4/17/2015 3 day 4/15/2015

Phone # Fax #

CA Labs

Dedicated to

Quality

Crisp Analytical, L.L.C.

1929 Old Denton Road Carrollton, TX 75006 Phone 972-242-2754 Fax 972-242-2798

CA Labs, L.L.C.

12232 Industriplex, Suite 32 Baton Rouge, LA 70809 Phone 225-751-5632 Fax 225-751-5634

Brad Kelsay CA Labs Project #:

Kelsay Environmental

Fort Vancouver 710 Building

CBR15041098

3693 SE Francis St.

Portland, OR Date:

Turnaround Time: Samples Received:

503-705-0514 Date Of Sampling:

Purchase Order #:

Sample # Com ment Layer

Analysts Physical Description of Subsample

Homo-geneo us (Y/N)

Asbestos type / calibrated visual estimate percent

Non-asbestos fiber type / percent

Non-fibrous type / percent

2 White Drywall with Paper N None Detected 10% ce 90% qu, gy

5555.01- 015 1

Gray Surfaced White Compound N None Detected 100% qu, bi, ca

Labs

A

C

Laboratory Director

Chris Williams

2 White Compound Beneath Tape Y None Detected 100% qu, ca

3 White Drywall with Paper N None Detected 10% ce 90% qu, gy

5555.01- 016 1 Brown Surfaced Tan Sealant N None Detected 100% qu, bi, ca

5555.01- 017 1 Brown Surfaced Tan Sealant N None Detected 100% qu, bi, ca

5555.01- 018 1 Black Cove Base Y None Detected 100% qu, ma

Baton Rouge NVLAP Lab Code 200772-0 TEM/PLM TDH 30-0370

LDEQ

Analysis Method: Interim (40CFR Part 763 Appendix E to Subpart E) / Improved (EPA-600 / R-93/116)

Preparation Method: HCL acid washing for carbonate based samples, chemical reduction for organically bound components, oil immersion for identification of asbestos types by dispersion attaining / becke line method.

ca - carbonate gypsum - gypsum bi - binder or - organic ma - matrix mi - mica ve - vermiculite ot -other pe - perlite qu - quartz fg - fiberglass mw - mineral wool wo - wollastinite ta - talc sy - synthetic ce - cellulose br - brucite ka - kaolin (clay) pa - palygorskite (clay) Approved Signatories:

Alicia Stretz Senior Analyst Analyst Alicia Stretz

1. Fire Damage significant fiber damage - reported percentages reflect unaltered fibers

2. Fire Damage no significant fiber damages effecting fibrous percentages

3. Actinolite in association with Vermiculite

4. Layer not analyzed - attached to previous positive layer and contamination is suspected

5. Not enough sample to analyze

6. Anthophyllite in association with Fibrous Talc

7. Contamination suspected from other building materials

8. Favorable scenario for water separation on vermiculite for possible analysis by another method

9. < 1% Result point counted positive

4/17/2015 3 day 4/15/2015

Phone # Fax #

CA Labs

Dedicated to

Quality

Crisp Analytical, L.L.C.

1929 Old Denton Road Carrollton, TX 75006 Phone 972-242-2754 Fax 972-242-2798

CA Labs, L.L.C.

12232 Industriplex, Suite 32 Baton Rouge, LA 70809 Phone 225-751-5632 Fax 225-751-5634

Brad Kelsay CA Labs Project #:

Kelsay Environmental

Fort Vancouver 710 Building

CBR15041098

3693 SE Francis St.

Portland, OR Date:

Turnaround Time: Samples Received:

503-705-0514 Date Of Sampling:

Purchase Order #:

Sample # Com ment Layer

Analysts Physical Description of Subsample

Homo-geneo us (Y/N)

Asbestos type / calibrated visual estimate percent

Non-asbestos fiber type / percent

Non-fibrous type / percent

2 Tan Mastic Y None Detected 100% qu, bi

5555.01- 019 1 Gray Insulation Y None Detected 100% fg

Labs

A

C

Laboratory Director

Chris Williams

5555.01- 020 1 White Drywall with Paper N None Detected 10% ce 90% qu, gy

2 Gray Insulation Y None Detected 100% fg

5555.01- 021 1 Tan Surfaced Gray Plaster N None Detected

1% fg 2% ce 97% qu, bi, ca

5555.01- 022 1 Gray Plaster Y None Detected 100% qu, ma, ca

5555.01- 023 1 Gray Plaster Y None Detected 100% qu, ma, ca

Baton Rouge NVLAP Lab Code 200772-0 TEM/PLM TDH 30-0370

LDEQ

Analysis Method: Interim (40CFR Part 763 Appendix E to Subpart E) / Improved (EPA-600 / R-93/116)

Preparation Method: HCL acid washing for carbonate based samples, chemical reduction for organically bound components, oil immersion for identification of asbestos types by dispersion attaining / becke line method.

ca - carbonate gypsum - gypsum bi - binder or - organic ma - matrix mi - mica ve - vermiculite ot -other pe - perlite qu - quartz fg - fiberglass mw - mineral wool wo - wollastinite ta - talc sy - synthetic ce - cellulose br - brucite ka - kaolin (clay) pa - palygorskite (clay) Approved Signatories:

Alicia Stretz Senior Analyst Analyst Alicia Stretz

1. Fire Damage significant fiber damage - reported percentages reflect unaltered fibers

2. Fire Damage no significant fiber damages effecting fibrous percentages

3. Actinolite in association with Vermiculite

4. Layer not analyzed - attached to previous positive layer and contamination is suspected

5. Not enough sample to analyze

6. Anthophyllite in association with Fibrous Talc

7. Contamination suspected from other building materials

8. Favorable scenario for water separation on vermiculite for possible analysis by another method

9. < 1% Result point counted positive

4/17/2015 3 day 4/15/2015

Phone # Fax #

CA Labs

Dedicated to

Quality

Crisp Analytical, L.L.C.

1929 Old Denton Road Carrollton, TX 75006 Phone 972-242-2754 Fax 972-242-2798

CA Labs, L.L.C.

12232 Industriplex, Suite 32 Baton Rouge, LA 70809 Phone 225-751-5632 Fax 225-751-5634

Brad Kelsay CA Labs Project #:

Kelsay Environmental

Fort Vancouver 710 Building

CBR15041098

3693 SE Francis St.

Portland, OR Date:

Turnaround Time: Samples Received:

503-705-0514 Date Of Sampling:

Purchase Order #:

Sample # Com ment Layer

Analysts Physical Description of Subsample

Homo-geneo us (Y/N)

Asbestos type / calibrated visual estimate percent

Non-asbestos fiber type / percent

Non-fibrous type / percent

5555.01- 024 1 Black Shingle with Black Gravel Y None Detected 12% fg 88% qu, bi

5555.01- 025 1 Black Shingle with Black Gravel Y None Detected 12% fg 88% qu, bi

Labs

A

C

Laboratory Director

Chris Williams

5555.01- 026 1 White Drywall with Paper N None Detected 10% ce 90% qu, gy

2 Gray Insulation Y None Detected 100% fg

5555.01- 027 1 White Insulation Y

20% Chrysotile 5% Amosite 75% qu, ca

5555.01- 028 1 Brown Covering Y None Detected 15% ce 85% qu, ma

2 Brown Fiberboard Y None Detected 100% ce Baton Rouge NVLAP Lab Code 200772-0 TEM/PLM TDH 30-0370

LDEQ

Analysis Method: Interim (40CFR Part 763 Appendix E to Subpart E) / Improved (EPA-600 / R-93/116)

Preparation Method: HCL acid washing for carbonate based samples, chemical reduction for organically bound components, oil immersion for identification of asbestos types by dispersion attaining / becke line method.

ca - carbonate gypsum - gypsum bi - binder or - organic ma - matrix mi - mica ve - vermiculite ot -other pe - perlite qu - quartz fg - fiberglass mw - mineral wool wo - wollastinite ta - talc sy - synthetic ce - cellulose br - brucite ka - kaolin (clay) pa - palygorskite (clay) Approved Signatories:

1. Fire Damage significant fiber damage - reported percentages reflect unaltered fibers

2. Fire Damage no significant fiber damages effecting fibrous percentages

3. Actinolite in association with Vermiculite

4. Layer not analyzed - attached to previous positive layer and contamination is suspected

5. Not enough sample to analyze

6. Anthophyllite in association with Fibrous Talc

7. Contamination suspected from other building materials

8. Favorable scenario for water separation on vermiculite for possible analysis by another method

9. < 1% Result point counted positive

10. TEM analysis suggested

Alicia Stretz Senior Analyst Analyst Alicia Stretz

CA Labs Dedicated to Quality

Crisp Analytical, L.L.C.

2081 Hutton, Suite 301 Carrollton, TX 75006 Phone 972-488-1414 Fax 972-488-8006

Labs

A

C

CA Labs, L.L.C.

12232 Industriplex, Suite 32 Baton Rouge, LA 70809 Phone 225-751-5632 Fax 225-751-5634

Atomic Absorption Lead Report

Analysis Method: Lead in Paint analyzed by Atomic Absorption (AA)/SW-846-7420;

This analysis is not covered by the scope of accreditation by NVLAP.

Sample Prep Method: Samples are dissolved in nitric acid, extracted, and analyzed on a properly calibrated AA; Absorbency curve was calculated, bandwidth corrected, and wavelength at the time of the analysis was measured and recorded.

Client Information:

Kelsay Environmental 3693 SE Francis St.

Portland, OR 97202

Client Project:

Fort Vancouver 710 Building

CA Labs Project #:

CBR15041099

Date: 04/20/2015

Phone: 503-705-0514 Turnaround Time: 3 day Samples Received: 04/15/2015

Fax: Attn: Brad Kelsay Purchase Order #:

NVLAP # 200772-0 Approved Signatories:

___________ TDH # 30-0370 _____________ ____________

Stanley Massett III Christopher Williams Alicia Stretz Analyst Page 2 of 2 Laboratory Director Senior Analyst Notes:

The current guidelines for lead in paint from the Consumer Products Safety Council (CPSC) is 0.06% by weight; the Housing and Urban Development (HUD) guideline is 0.5% by weight.

This test report relates only to the items tested. This test reports relates only to the items tested. NVLAP accreditation does not imply endorsement by any US Government agency. This report may not be reproduced except in full without written permission from CA Labs.

These results are submitted pursuant to CA Labs’ current terms and condition of sale, including the company's standard warranty and limitation of liability provisions and no responsibility or liability is assumed for the manner in which the results are used or interpreted. Unless notified in writing to return the samples covered by this report, CA Labs will store the samples for a period of ninety (90) days before discarding. A shipping and handling fee may be assessed for the return of any samples.

Analysis performed at CA Labs, LLC. 12232 Industriplex Blvd, Suite 32, Baton Rouge, LA 70809. Phone 225-751-5632, fax 225-751-5634, after hours mobile 225-993-3471.

Sample#

Sample Concentration:

parts per million (ppm)

Weight Percent:

5555.00-1001 31,471.59 3.1472

5555.00-1002 <112.68 <0.0113

Lab Blank < 1.00 ---- ----

Quality Control:

Duplicate: ___87.95__RPD Spike: ___99.2___% Recovery

CA Labs Dedicated to Quality

Crisp Analytical, L.L.C.

2081 Hutton, Suite 301 Carrollton, TX 75006 Phone 972-488-1414 Fax 972-488-8006

Labs

A

C

CA Labs, L.L.C.

12232 Industriplex, Suite 32 Baton Rouge, LA 70809 Phone 225-751-5632 Fax 225-751-5634

Baton Rouge NVLAP 200772-0 TEM / PLM TDH 30-0370

ATOMIC ABSORPTION

LEAD ANALYSIS

LABORATORY ANALYSIS REPORT

Kelsay Environmental 3693 SE Francis St.

Portland, OR 97202 reference number: CBR15041099

LABORATORY ANALYSIS:

Summary of lead analysis by atomic absorption in all relevant media using the method described in SW-846-7420. All analysts have received the necessary in-house and extramural training to perform analysis of samples for the presence of lead. A duplicate analysis is performed on greater than ten percent of all samples. A spiked concentration sample is analyzed with each sample group for instrument calibration. All analysts are required to participate in quality control analysis rounds.

Instrument calibrations are performed on a daily, weekly, and monthly basis.

This report must not be used to claim product endorsement or any agency of the U.S. Government.

This test relates only to the items described and tested herein. This report may not be reproduced except in full, without written permission by CA Labs. CA Labs is accredited by the National Voluntary Laboratory Accreditation Program (NVLAP) for selected test methods for airborne fiber analysis (TEM) and for bulk asbestos fiber analysis (PLM).

This method is not covered under the scope of accreditation of NVLAP.

METHOD:

The procedure for paint chip analysis follows AOAC5.009(974.02) and SW-846-7420. The analysis of soil, wipes, and wastewater for the presence of lead is also referenced by SW-846-7420. Methodology for the analysis of lead in air samples follows NIOSH Method 7082.

Analysis performed at CA Labs, LLC. 12232 Industriplex Blvd, Suite 32, Baton Rouge, LA 70809.

Phone 225-751-5632, fax 225-751-5634, after hours mobile 225-993-3471.