ONSITE INSCRIPTIONS DRAWINGS PACKET.pdf

PDF 7 MB Posted Aug 24, 2020

Attached to: Onsite inscriptions for 9 cemeteries- presolicitation notice/solicitation and amendments
Solicitation number: 36C78621R0006
Issued by: Department of Veterans Affairs National Cemetery Administration

About this file

Written by GovTribe AI · Dec 29, 2023

This document package contains technical drawings and specifications for inscription services on government-owned headstones, markers, and niche covers at national cemeteries. The solicitation seeks offers for on-site inscription work at an estimated nine cemeteries and involves the National Cemetery Administration and Department of Veterans Affairs. Services include inscribing veteran and dependent information on marble and granite memorials according to prescribed fonts, layouts, depths, and tolerances. Offerors must demonstrate ability to produce high-quality inscriptions on a variety of stone types while following detailed standards for finishes, dimensions, and defects.

View the file

Other files

File	Type	Posted
36C78621R0006 0002.pdf	PDF	Aug 31, 2020
36C78621R0006 0001.pdf	PDF	Aug 28, 2020
36C78621R0006 RFP.pdf	PDF	Aug 24, 2020
36C78621R0006 Pre-solicitation Notice.pdf	PDF	Aug 24, 2020

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Date

Project No.

DrawnCheckedMarker Type

Project TitleDrawing Title

DateRevisions

DRAWING NO.

Sheet Of

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-BNC-1

1 1

I1/H1

GOVERNMENT HEADSTONES

AND MARKERS

NICHE COVER, BLANK

MARBLE/GRANITE

Signed

42 310

1" = 1" GRAPHIC SCALE

DO NOT SCALE THIS DRAWING

Location

Digital File

A-BNC-1.DWG 24" x 36" SHEET

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

SUPERSEDES DRAWING NC-1

6-5-03

DATED 1 OCT 1995

GENERAL NOTES:

1. ALL DIMENSIONAL TOLERANCES FOR LENGTH, WIDTH, AND THICKNESS

ARE ± 1/16" UNLESS OTHERWISE SPECIFIED.

SIZE AND LOCATION OF PREDRILLED

03-01-07

HOLES REVISED AS SHOWN

1 2 3 4 5 6 7 8 9

A B

C D

E F

A B

C D

E F

CONVERSION TABLE

ENGLISH/

U.S. STANDARD

METRIC

42"

24"

14 1/2"

13"

106.68 cm

60.96 cm

36.83 cm

33.02 cm

10.16 cm

7.62 cm

2 1/2"

1 5/8"

3/4"

5/8"

1/2"

1/4"

6.35 cm

5.08 cm

4.13 cm

2.54 cm

1.90 cm

1.59 cm

1.27 cm

.64 cm

U.S. STANDARD

METRIC

ENGLISH/

SIDE VIEW FRONT VIEW

2. DEFLECTION SHALL NOT BE GREATER THAN +/- 1/32" ALONG EITHER THE BACK OR FACE.

2 ROSETTES REMOVED AND ADDITIONAL DIMENSIONS 11-26-13

3. SPAWLING (PUNCH OUT) AROUND HOLES AT BACK SIDE MUST NOT EXCEED

MORE THAN 1/4" BEYOND WALLS OF BORING NOR BE MORE THAN 3/32" DEEP.

KEE/KS

MLT

SYSTEMS

NOVEMBER 11, 2013

1 2 3 4 5 6 7 8 9

A B

C D

E F

A B

C D

E F

DO NOT SCALE THIS DRAWING

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

EMBLEM TABLE - NUMERICAL

EMBLEM NAME

NUMBER

EMBLEM

LOCATION

SHEET

CHRISTIAN

2 BUDDHIST

3 JUDAISM

4 PRESBYTERIAN CROSS

5 RUSSIAN ORTHODOX CROSS

6 LUTHERAN CROSS

7 EPISCOPAL CROSS

8 UNITARIAN CHURCH FLAMING CHALICE

9 UNITED METHODIST CHURCH

10 AARONIC ORDER CHURCH

11 MORMON - ANGEL MORONI

12 NATIVE AMERICAN CHURCH OF AMERICA

13 SERBIAN ORTHODOX

14 GREEK CROSS

15 BAHAI - 9 POINT STAR

16 ATHEIST

17 MUSLIM-CRESCENT AND STAR

18 HINDU

19 KONKO-KYO FAITH

20 COMMUNITY OF CHRIST

SUFISM REORIENTED

22 TENRIKYO CHURCH

23 SEICHO-NO-IE

24 THE CHURCH OF THE WORLD MESSIANITY (IZUNOME)

25 UNITED CHURCH OF RELIGIOUS SCIENCE

26 CHRISTIAN REFORMED CHURCH

27 UNITED MORAVIAN CHURCH

28 ECKANKAR

29 CHRISTIAN CHURCH

30 CHRISTIAN & MISSIONARY ALLIANCE

31 UNITED CHURCH OF CHRIST

32 HUMANIST EMBLEM OF SPIRIT

33 PRESBYTERIAN CHURCH (USA)

34 IZUMO TAISHAKYO MISSION OF HAWAII

35 SOKA GAKKAI INTERNATIONAL - USA

36 SIKH (KHANDA)

37 WICCA (PENTACLE)

38 LUTHERAN CHURCH MISSOURI SYNOD

39 NEW APOSTOLIC CHURCH

40 SEVENTH DAY ADVENTIST

CELTIC CROSS

42 ARMENIAN CROSS

43 FAROHAR

44 MESSIANIC JEWISH

45 KOHEN HANDS

46 CATHOLIC CELTIC CROSS

47 FIRST CHURCH OF CHRIST, SCIENTIST

48 MEDICINE WHEEL

49 INFINITY

50 CONFEDERATE (SOUTHERN CROSS OF HONOR)

51 LUTHER ROSE

52 LANDING EAGLE

53 FOUR DIRECTIONS

54 CHURCH OF NAZARENE

55 HAMMER OF THOR

56 UNIFICATION CHURCH

57 SANDHILL CRANE

EMBLEM TABLE - ALPHABETICAL

LOCATION

SHEET

AARONIC ORDER CHURCH

BAHAI - 9 POINT STAR

ATHEIST

COMMUNITY OF CHRIST

CHRISTIAN REFORMED CHURCH

CHRISTIAN CHURCH

CHRISTIAN & MISSIONARY ALLIANCE

CELTIC CROSS

CATHOLIC CELTIC CROSS

CONFEDERATE (SOUTHERN CROSS OF HONOR)

CHURCH OF NAZARENE

NUMBER

EMBLEM

CHRISTIAN1

ARMENIAN CROSS

BUDDHIST2

MORMON - ANGEL MORONI

NATIVE AMERICAN CHURCH OF AMERICA

SERBIAN ORTHODOX

GREEK CROSS

MUSLIM-CRESCENT AND STAR

HINDU

KONKO-KYO FAITH

SUFISM REORIENTED

TENRIKYO CHURCH

SEICHO-NO-IE

UNITED CHURCH OF RELIGIOUS SCIENCE

UNITED MORAVIAN CHURCH

ECKANKAR

UNITED CHURCH OF CHRIST

HUMANIST EMBLEM OF SPIRIT

PRESBYTERIAN CHURCH (USA)

IZUMO TAISHAKYO MISSION OF HAWAII

SOKA GAKKAI INTERNATIONAL - USA

SIKH (KHANDA)

WICCA (PENTACLE)

LUTHERAN CHURCH MISSOURI SYNOD

NEW APOSTOLIC CHURCH

SEVENTH DAY ADVENTIST

FAROHAR

MESSIANIC JEWISH

KOHEN HANDS

FIRST CHURCH OF CHRIST, SCIENTIST

MEDICINE WHEEL

INFINITY

LUTHER ROSE

LANDING EAGLE

FOUR DIRECTIONS

GUARDIAN ANGEL

UNIFICATION CHURCH

ISLAMIC 5 POINTED STAR

JUDAISM

PRESBYTERIAN CROSS

RUSSIAN ORTHODOX CROSS

LUTHERAN CROSS

EPISCOPAL CROSS

UNITARIAN CHURCH FLAMING CHALICE

UNITED METHODIST CHURCH

MEDAL MOH US AIR FORCE

MEDAL MOH US ARMY

MEDAL MOH US NAVY, US MARINE CORPS, AND US COAST GUARD

61 SHINTO

SANDHILL CRANE57

CHURCH OF GOD

POMEGRANATE

MESSIANIC

POMEGRANATE59

MESSIANIC60

CHURCH OF GOD58

66 WISCONSIN EVANGELICAL LUTHERAN SYNOD

SHINTO61

62 SACRED HEART

63 AFRICAN ANCESTRAL TRADITIONALIST

64 MALTESE CROSS

65 DRUID

SACRED HEART62

AFRICAN ANCESTRAL TRADITIONALIST63

MALTESE CROSS64

DRUID65

DESCRIPTION

NUMBER

REVISION

DATE

98 ISLAMIC 5 POINTED STAR

67 POLISH NATIONAL CATHOLIC CHURCH

WISCONSIN EVANGELICAL LUTHERAN SYNOD

POLISH NATIONAL CATHOLIC CHURCH67

MOH US AIR FORCE

MOH US ARMY

MOH US NAVY, US MARINE CORPS, AND US COAST GUARD

MEDAL

THE CHURCH OF THE WORLD MESSIANITY (IZUNOME)24

EMBLEM NAME

A 03-01-07

B 03-01-07

06-27-14

07-02-15

E 01-18-17

MOVED INCISED STONE DETAIL FROM SHEET 1, REARRANGED

EMBLEMS FROM SHEET 1 OF 3. ADDED EMBLEMS 33, 34, 35 & 36

ADDED EMBLEMS 37 THRU 57 - REARRANGED ALL EMBLEMS TO FIT

FULL SCALE SHEET LAYOUT, REVISED GENERAL NOTES, ADDED

INDEX CHARTS

ADDED EMBLEMS 58 THRU 60. UPDATED EMBLEM TABLES

REVISED EMBLEM 43. ADDED EMBLEM 61.

ADDED EMBLEMS 62, 63, 64 AND 65.

F 01-23-17

G 11-24-17ADDED EMBLEMS 66 AND 67

H 12-09-17

ROTATED EMBLEM 63. INSERTED AE CONTRACTOR LOGO AND

DETAILS. MOVE EMBLEM TABLE AND REVISION BLOCK INTO COVER

PAGE.

ADDED NOTES TO GENERAL NOTES NUMBER 1. REPLACED NOTES

TO GENERAL NOTES NUMBERS 2 AND 4. REVISED AE

CONTRACTOR DETAILS.

REVISION TABLE

I 12-23-17

REVISED DIMENSION ON RAISED BRONZE AND INCISED STONE ON

SHEET 1.

69 HEART

68 GUARDIAN ANGEL

70 SHEPHERD AND FLAG

SHEPHERD AND FLAG70

HEART69

HAMMER OF THOR55

J 06-28-18

ADDED EMBLEMS 68, 69 AND 70.

K 09-04-19

ADDED EMBLEMS 71, 72, 73 AND 74.

FAITH AND PRAYER

EVANGELICAL LUTHERAN CHURCH72

AFRICAN METHODIST EPISCOPAL (AME)

UNIVERSALIST CROSS

AFRICAN METHODIST EPISCOPAL (AME)71

EVANGELICAL LUTHERAN CHURCH72

FAITH AND PRAYER74

UNIVERSALIST CROSS

AutoCAD SHX Text

NATIONAL CEMETERY ADMINISTRATION

AutoCAD SHX Text

GOVERNMENT HEADSTONES AND MARKERS

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text S

RAISED BRONZE

SCALE:1"=1"

INCISED STONE

SCALE:1"=1"

JUDAISM

(3)

SECTION E-E

SEE INSCRIPTION

TABLE

SEE INSCRIPTION

TABLE

SEE INSCRIPTION

TABLE

SEE INSCRIPTION

TABLE

CHRISTIAN SECTION F-F BUDDHIST

(2)

SECTION G-G CONFEDERATE (SOUTHERN CROSS OF HONOR)

(50)

SECTION H-H

HEBREW

(3)

BUDDHIST

(2)

SECTION A-A SECTION C-CCHRISTIAN

(1)

CONFEDERATE

(SOUTHERN CROSS OF HONOR)SECTION B-B SECTION D-D

(50)

A B

B C

1 3/8"

3/32"

1/64"

1/8" (4/32")

3/64"

1/8" (4/32") 1/8" (4/32")

Date

Project No.

DrawnCheckedMarker Type

Project TitleDrawing Title

1 2 3 4 5 6 7 8 9

A B

C D

E F

DRAWING NO.

Sheet Of

A B

C D

E F

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-EM-1

1 5

Signed

DO NOT SCALE THIS DRAWING

Location

Digital File

A-EM-1.DWG 24" x 36" SHEET

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

GOVERNMENT HEADSTONES

AND MARKERS

EMBLEMS

KEE/KS

MLT

SYSTEMS

DECEMBER 23, 2017

ALL

GENERAL NOTES:

1. ALL EMBLEMS WHEN USED ON STONE NICHE COVERS SHALL BE 2" AT THEIR LARGEST POINT TO POINT MEASUREMENT AND ALL OTHER

AREAS IN EQUAL PROPORTION. ALL EMBLEMS ON FLAT MARKERS AND UPRIGHT HEADSTONES SHALL BE 3" AT THEIR LARGEST POINT TO

POINT MEASUREMENT AND ALL OTHER AREAS SHALL BE IN EQUAL PROPORTION.

2. INSCRIPTION DEPTHS ARE SHOWN IN THE TABLE AT THE UPPER LEFT CORNER OF DRAWING A-LFN&OC.

3. ALL EMBLEMS ARE TO BE INCISED AS INDICATED BY SOLID LINE OR SOLID AREA. CLEAR AREAS TO REMAIN AS FINISHED SURFACE.

4. THE CONTRACTOR MAY REDUCE THE EMBLEM'S DEPTH WHERE ELEMENTS OF THE DESIGN ARE SO DETAILED AS TO MAKE IT IMPRACTICAL

TO ACHIEVE DEPTHS SHOWN IN THE TABLE OF DRAWING A-LFN&OC.

DateRevisions DateRevisions

ApprovedCheckedDrawn

AE Contractor

IRN CSJJP/JN/IRN

06-05-03

SUPERSEDES DRAWING ID-4

SHEET 2 OF 2 DATED 12-2-99

03-01-07

MOVED INCISED STONE DETAIL FROM SHT 1,

REARRANGED EMBLEMS FROM SHEET 1 OF 3

07-01-13

REARRANGED ALL EMBLEMS TO FIT FULL SCALE

SHEET LAYOUT. REVISED GENERAL NOTES,

ADDED INDEX CHARTS

01-23-17

INSERTED AE CONTRACTOR LOGO AND DETAILS.

MOVE EMBLEM TABLE AND REVISION BLOCK INTO

COVER PAGE.

42 310

1" = 1" GRAPHIC SCALE

12-09-17H

ADD NOTES TO GENERAL NOTES NUMBER 1.

REPLACED NOTES TO GENERAL NOTES NUMBERS

2 AND 4. REVISED AE CONTRACTOR DETAILS.

PLANATE MANAGEMENT GROUP

3631 Ransom Place, Alexandria, VA 22306

12-23-17I

REVISED DIMENSION ON RAISED BRONZE AND

INCISED STONE ON SHEET 1.

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text S

AutoCAD SHX Text N

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text

ATIONAL

AutoCAD SHX Text

EMETERY

DMINISTRATION

(4)

PRESBYTERIAN CROSS

(5)

RUSSIAN ORTHODOX CROSS

(3)

JUDAISM

(2)

CHRISTIAN BUDDHIST

(1)

(10)

AARONIC ORDER CHURCH

(6)

LUTHERAN CROSS

(7)

EPISCOPAL CROSS

(8)

UNITARIAN CHURCH FLAMING

(9)

UNITED METHODIST CHURCH

CHALICE

(11)

MORMON-ANGEL MORONI

(12)

NATIVE AMERICAN CHURCH

(13)

SERBIAN ORTHODOX

(14)

GREEK CROSS

(15)

BAHAI-9 POINT STAR

OF AMERICA

(16)

ATHEIST

(17)

MUSLIM-CRESCENT AND STAR

(18)

HINDU

(19)

KONKO-KYO FAITH

(20)

COMMUNITY OF CHRIST

Date

Project No.

DrawnCheckedMarker Type

Project TitleDrawing Title

1 2 3 4 5 6 7 8 9

A B

C D

E F

DRAWING NO.

Sheet Of

A B

C D

E F

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-EM-2

2 5

Signed

DO NOT SCALE THIS DRAWING

Location

Digital File

A-EM-2.DWG 24" x 36" SHEET

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

GOVERNMENT HEADSTONES

AND MARKERS

EMBLEMS

KEE/KS

MLT

SYSTEMSALL

DateRevisions DateRevisions

ApprovedCheckedDrawn

AE Contractor

IRN CSJJP/JN/IRN

06-05-03

SUPERSEDES DRAWING ID-4

SHEET 2 OF 2 DATED 12-2-99

07-01-13

REARRANGED ALL EMBLEMS TO FIT FULL SCALE

SHEET LAYOUT. REVISED GENERAL NOTES,

ADDED INDEX CHARTS

01-23-17

INSERTED AE CONTRACTOR LOGO AND DETAILS.

ADDED REVISION BLOCK IN COVER PAGE.

42 310

1" = 1" GRAPHIC SCALE

12-09-17H

ADD NOTES TO GENERAL NOTES NUMBER 1.

REPLACED NOTES TO GENERAL NOTES NUMBERS

2 AND 4. REVISED AE CONTRACTOR DETAILS.

DECEMBER 23, 2017

GENERAL NOTES:

1. ALL EMBLEMS WHEN USED ON STONE NICHE COVERS SHALL BE 2" AT THEIR LARGEST POINT TO POINT MEASUREMENT AND ALL OTHER

AREAS IN EQUAL PROPORTION. ALL EMBLEMS ON FLAT MARKERS AND UPRIGHT HEADSTONES SHALL BE 3" AT THEIR LARGEST POINT TO

POINT MEASUREMENT AND ALL OTHER AREAS SHALL BE IN EQUAL PROPORTION.

2. INSCRIPTION DEPTHS ARE SHOWN IN THE TABLE AT THE UPPER LEFT CORNER OF DRAWING A-LFN&OC.

3. ALL EMBLEMS ARE TO BE INCISED AS INDICATED BY SOLID LINE OR SOLID AREA. CLEAR AREAS TO REMAIN AS FINISHED SURFACE.

4. THE CONTRACTOR MAY REDUCE THE EMBLEM'S DEPTH WHERE ELEMENTS OF THE DESIGN ARE SO DETAILED AS TO MAKE IT IMPRACTICAL

TO ACHIEVE DEPTHS SHOWN IN THE TABLE OF DRAWING A-LFN&OC.

PLANATE MANAGEMENT GROUP

3631 Ransom Place, Alexandria, VA 22306

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text S

AutoCAD SHX Text N

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text

ATIONAL

AutoCAD SHX Text

EMETERY

(22)

TENRIKYO CHURCH

(23)

SEICHO-NO-IE

(24)

THE CHURCH OF WORLD MESSIANITY

(21)

SUFISM REORIENTED

(IZUNOME)

(25)

UNITED CHURCH OF RELIGIOUS

SCIENCE

(28)

ECKANKAR

(29)

CHRISTIAN CHURCH

(30)

CHRISTIAN & MISSIONARY ALLIANCE

(26)

CHRISTIAN REFORMED CHURCH

(27)

UNITED MORAVIAN CHURCH

(31)

UNITED CHURCH OF CHRIST

(32)

HUMANIST EMBLEM OF SPIRIT

(33)

PRESBYTERIAN CHURCH

(USA)

(34)

IZUMO TAISHAKYO MISSION

OF HAWAII

(35)

SOKA GAKKAI INTERNATIONAL -

USA

(36)

SIKH

(KHANDA)

(37)

WICCA

(PENTACLE)

(40)

SEVENTH DAY ADVENTIST

(39)

NEW APOSTOLIC CHURCH

(38)

LUTHERAN CHURCH MISSOURI SYNOD

Date

Project No.

DrawnCheckedMarker Type

Project TitleDrawing Title

1 2 3 4 5 6 7 8 9

A B

C D

E F

DRAWING NO.

Sheet Of

A B

C D

E F

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-EM-3

3 5

Signed

DO NOT SCALE THIS DRAWING

Location

Digital File

A-EM-3.DWG 24" x 36" SHEET

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

GOVERNMENT HEADSTONES

AND MARKERS

EMBLEMS

KEE/KS

MLT

SYSTEMSALL

DateRevisions DateRevisions

ApprovedCheckedDrawn

AE Contractor

IRN CSJJP/JN/IRN

A 03-01-07

B 07-01-13

ADDED EMBLEMS 33, 34, 35 & 36

ADDED EMBLEMS 37 THRU 57 - REARRANGED ALL

EMBLEMS TO FIT FULL SCALE SHEET LAYOUT,

REVISED GENERAL NOTES, ADDED INDEX CHARTS

06-05-03---

SUPERSEDES DRAWING ID-4

SHEET 2 OF 2 DATED 12-2-99

01-23-17F

INSERTED AE CONTRACTOR LOGO AND DETAILS.

ADDED REVISION BLOCK IN COVER PAGE.

42 310

1" = 1" GRAPHIC SCALE

12-09-17H

ADD NOTES TO GENERAL NOTES NUMBER 1.

REPLACED NOTES TO GENERAL NOTES NUMBERS

2 AND 4. REVISED AE CONTRACTOR DETAILS.

DECEMBER 23, 2017

GENERAL NOTES:

1. ALL EMBLEMS WHEN USED ON STONE NICHE COVERS SHALL BE 2" AT THEIR LARGEST POINT TO POINT MEASUREMENT AND ALL OTHER

AREAS IN EQUAL PROPORTION. ALL EMBLEMS ON FLAT MARKERS AND UPRIGHT HEADSTONES SHALL BE 3" AT THEIR LARGEST POINT TO

POINT MEASUREMENT AND ALL OTHER AREAS SHALL BE IN EQUAL PROPORTION.

2. INSCRIPTION DEPTHS ARE SHOWN IN THE TABLE AT THE UPPER LEFT CORNER OF DRAWING A-LFN&OC.

3. ALL EMBLEMS ARE TO BE INCISED AS INDICATED BY SOLID LINE OR SOLID AREA. CLEAR AREAS TO REMAIN AS FINISHED SURFACE.

4. THE CONTRACTOR MAY REDUCE THE EMBLEM'S DEPTH WHERE ELEMENTS OF THE DESIGN ARE SO DETAILED AS TO MAKE IT IMPRACTICAL

TO ACHIEVE DEPTHS SHOWN IN THE TABLE OF DRAWING A-LFN&OC.

PLANATE MANAGEMENT GROUP

3631 Ransom Place, Alexandria, VA 22306

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text S

AutoCAD SHX Text N

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text

ATIONAL

AutoCAD SHX Text

EMETERY

(45)

KOHEN HANDS

(44)

MESSIANIC JEWISH

(42)

ARMENIAN CROSS

(41)

CELTIC CROSS

(43)

FAROHAR

(50)

CONFEDERATE

(49)

INFINITY

(48)

MEDICINE WHEEL

(47)

FIRST CHURCH OF CHRIST, SCIENTIST

(46)

CATHOLIC CELTIC CROSS

(SOUTHERN CROSS OF HONOR)

(53)

FOUR DIRECTIONS

(52)

LANDING EAGLE

(51)

LUTHER ROSE

(54)

CHURCH OF NAZARENE

(55)

HAMMER OF THOR

(56)

UNIFICATION CHURCH

(57)

SANDHILL CRANE

(58)

CHURCH OF GOD

(59)

POMEGRANATE

(60)

MESSIANIC

Date

Project No.

DrawnCheckedMarker Type

Project TitleDrawing Title

1 2 3 4 5 6 7 8 9

A B

C D

E F

DRAWING NO.

Sheet Of

A B

C D

E F

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-EM-4

4 5

Signed

DO NOT SCALE THIS DRAWING

Location

Digital File

A-EM-4.DWG 24" x 36" SHEET

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

GOVERNMENT HEADSTONES

AND MARKERS

EMBLEMS

KEE/KS

MLT

SYSTEMSALL

DateRevisions DateRevisions

ApprovedCheckedDrawn

AE Contractor

IRN CSJJP/JN/IRN

C 06-27-14

D 07-02-15

ADDED EMBLEMS 58 THRU 60.

REVISE EMBLEM 43.

06-05-03---

SUPERSEDES DRAWING ID-4

SHEET 2 OF 2 DATED 12-2-99

B 07-01-13

ADDED EMBLEMS 37 THRU 57. REARRANGED ALL

EMBLEMS TO FIT FULL SCALE SHEET LAYOUT.

REVISED GENERAL NOTES, ADDED INDEX CHARTS

01-23-17

INSERTED AE CONTRACTOR LOGO AND DETAILS.

ADDED REVISION BLOCK IN COVER PAGE.

42 310

1" = 1" GRAPHIC SCALE

12-09-17H

ADD NOTES TO GENERAL NOTES NUMBER 1.

REPLACED NOTES TO GENERAL NOTES NUMBERS

2 AND 4. REVISED AE CONTRACTOR DETAILS.

DECEMBER 23, 2017

GENERAL NOTES:

1. ALL EMBLEMS WHEN USED ON STONE NICHE COVERS SHALL BE 2" AT THEIR LARGEST POINT TO POINT MEASUREMENT AND ALL OTHER

AREAS IN EQUAL PROPORTION. ALL EMBLEMS ON FLAT MARKERS AND UPRIGHT HEADSTONES SHALL BE 3" AT THEIR LARGEST POINT TO

POINT MEASUREMENT AND ALL OTHER AREAS SHALL BE IN EQUAL PROPORTION.

2. INSCRIPTION DEPTHS ARE SHOWN IN THE TABLE AT THE UPPER LEFT CORNER OF DRAWING A-LFN&OC.

3. ALL EMBLEMS ARE TO BE INCISED AS INDICATED BY SOLID LINE OR SOLID AREA. CLEAR AREAS TO REMAIN AS FINISHED SURFACE.

4. THE CONTRACTOR MAY REDUCE THE EMBLEM'S DEPTH WHERE ELEMENTS OF THE DESIGN ARE SO DETAILED AS TO MAKE IT IMPRACTICAL

TO ACHIEVE DEPTHS SHOWN IN THE TABLE OF DRAWING A-LFN&OC.

PLANATE MANAGEMENT GROUP

3631 Ransom Place, Alexandria, VA 22306

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text S

AutoCAD SHX Text N

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text

ATIONAL

AutoCAD SHX Text

EMETERY

(98)

CANNOT BE MADE AVAILABLE FOR PUBLIC OR PRIVATE USE.

NOTE: THE ABOVE EMBLEM IS COPYRIGHT PROTECTED AND

ISLAMIC 5 POINTED STAR

(61)

SHINTO

(62)

SACRED HEART

(63)

AFRICAN ANCESTRAL TRADITIONALIST

(64)

MALTESE CROSS

(65)

DRUID

(67)

POLISH NATIONAL CATHOLIC CHURCH

(66)

WISCONSIN EVANGELICAL LUTHERAN SYNOD

(68)

GUARDIAN ANGEL

(69)

HEART

(70)

SHEPHERD AND FLAG

MOH US AIR FORCE MOH US ARMY MOH US NAVY, US MARINE CORPS, AND US COAST GUARD

Date

Project No.

DrawnCheckedMarker Type

Project TitleDrawing Title

1 2 3 4 5 6 7 8 9

A B

C D

E F

DRAWING NO.

Sheet Of

A B

C D

E F

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-EM-5

5 5

Signed

DO NOT SCALE THIS DRAWING

Location

Digital File

A-EM-5.DWG 24" x 36" SHEET

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

GOVERNMENT HEADSTONES

AND MARKERS

EMBLEMS

KEE/KS

MLT

SYSTEMS

JUNE 28, 2018

ALL

DateRevisions DateRevisions

ApprovedCheckedDrawn

AE Contractor

IRN CSJJP/JN/IRN

PLANATE MANAGEMENT GROUP

3631 Ransom Place, Alexandria, VA 22306

ADDED EMBLEM 61.

ADDED EMBLEMS 62, 63, 64 AND 65.

D 07-02-15

E 01-18-17

F 01-23-17ROTATED EMBLEM 6306-05-03---

SUPERSEDES DRAWING ID-4

SHEET 2 OF 2 DATED 12-2-99

REARRANGED ALL EMBLEMS TO FIT FULL SCALE

SHEET LAYOUT. REVISED GENERAL NOTES,

ADDED INDEX CHARTS

B 07-01-13 G 11-24-17ADDED EMBLEM 66 AND 67.

42 310

1" = 1" GRAPHIC SCALE

12-09-17 H

ADD NOTES TO GENERAL NOTES NUMBER 1.

REPLACED NOTES TO GENERAL NOTES NUMBERS

2 AND 4. REVISED AE CONTRACTOR DETAILS.

GENERAL NOTES:

1. ALL EMBLEMS WHEN USED ON STONE NICHE COVERS SHALL BE 2" AT THEIR LARGEST POINT TO POINT MEASUREMENT AND ALL OTHER

AREAS IN EQUAL PROPORTION. ALL EMBLEMS ON FLAT MARKERS AND UPRIGHT HEADSTONES SHALL BE 3" AT THEIR LARGEST POINT TO

POINT MEASUREMENT AND ALL OTHER AREAS SHALL BE IN EQUAL PROPORTION.

2. INSCRIPTION DEPTHS ARE SHOWN IN THE TABLE AT THE UPPER LEFT CORNER OF DRAWING A-LFN&OC.

3. ALL EMBLEMS ARE TO BE INCISED AS INDICATED BY SOLID LINE OR SOLID AREA. CLEAR AREAS TO REMAIN AS FINISHED SURFACE.

4. THE CONTRACTOR MAY REDUCE THE EMBLEM'S DEPTH WHERE ELEMENTS OF THE DESIGN ARE SO DETAILED AS TO MAKE IT IMPRACTICAL

TO ACHIEVE DEPTHS SHOWN IN THE TABLE OF DRAWING A-LFN&OC.

06-28-18J

ADDED EMBLEM 68, 69 AND 70.

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text S

AutoCAD SHX Text N

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text

ATIONAL

AutoCAD SHX Text

EMETERY

MOH US AIR FORCE MOH US ARMY MOH US NAVY, US MARINE CORPS, AND US COAST GUARD

Date

Project No.

DrawnCheckedMarker Type

Project TitleDrawing Title

1 2 3 4 5 6 7 8 9

A B

C D

E F

DRAWING NO.

Sheet Of

A B

C D

E F

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-EM-6

6 6

Signed

DO NOT SCALE THIS DRAWING

Location

Digital File

A-EM-6.DWG 24" x 36" SHEET

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

GOVERNMENT HEADSTONES

AND MARKERS

EMBLEMS

KEE/KS

MLT

SYSTEMS

SEPTEMBER 04, 2019

ALL

DateRevisions DateRevisions

ApprovedCheckedDrawn

AE Contractor

CSJ CSJIRN

PLANATE MANAGEMENT GROUP

3631 Ransom Place, Alexandria, VA 22306

ADDED EMBLEM 61.

ADDED EMBLEMS 62, 63, 64 AND 65.

D 07-02-15

E 01-18-17

F 01-23-17ROTATED EMBLEM 6306-05-03---

SUPERSEDES DRAWING ID-4

SHEET 2 OF 2 DATED 12-2-99

REARRANGED ALL EMBLEMS TO FIT FULL SCALE

SHEET LAYOUT. REVISED GENERAL NOTES,

ADDED INDEX CHARTS

B 07-01-13 G 11-24-17ADDED EMBLEM 66 AND 67.

42 310

1" = 1" GRAPHIC SCALE

12-09-17 H

ADD NOTES TO GENERAL NOTES NUMBER 1.

REPLACED NOTES TO GENERAL NOTES NUMBERS

2 AND 4. REVISED AE CONTRACTOR DETAILS.

06-28-18J

ADDED EMBLEM 68, 69 AND 70.

GENERAL NOTES:

1. ALL EMBLEMS WHEN USED ON STONE NICHE COVERS SHALL BE 2" AT THEIR LARGEST POINT TO POINT

MEASUREMENT AND ALL OTHER AREAS IN EQUAL PROPORTION. ALL EMBLEMS ON FLAT MARKERS AND

UPRIGHT HEADSTONES SHALL BE 3" AT THEIR LARGEST POINT TO POINT MEASUREMENT AND ALL OTHER

AREAS SHALL BE IN EQUAL PROPORTION.

2. INSCRIPTION DEPTHS ARE SHOWN IN THE TABLE AT THE UPPER LEFT CORNER OF DRAWING A-LFN&OC.

3. ALL EMBLEMS ARE TO BE INCISED AS INDICATED BY SOLID LINE OR SOLID AREA. CLEAR AREAS TO REMAIN

AS FINISHED SURFACE.

4. THE CONTRACTOR MAY REDUCE THE EMBLEM'S DEPTH WHERE ELEMENTS OF THE DESIGN ARE SO

DETAILED AS TO MAKE IT IMPRACTICAL TO ACHIEVE DEPTHS SHOWN IN THE TABLE OF DRAWING A-LFN&OC.

DateRevisions

K 09-04-19

ADDED EMBLEMS 71, 72, 73 AND 74.

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text S

AutoCAD SHX Text N

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text

ATIONAL

AutoCAD SHX Text

EMETERY

Project No.

DrawnCheckedMarker Type

Project TitleDrawing Title

1 2 3 4 5 6 7 8 9

A B

C D

E F

DRAWING NO.

Sheet Of

A B

C D

E F

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-L1

1 1

Signed

Location

Digital File

GOVERNMENT HEADSTONES

AND MARKERS

SMALL FLAT GRANITE MARKER

KEE

SEPT. 04, 2019

DateRevisions

ApprovedCheckedDrawn

AE Contractor

CSJ CSJIRN

PLANATE MANAGEMENT GROUP

3631 Ransom Place, Alexandria, VA 22306

12" X 18" X 3"

Description

6/5/2003--- SUPERSEDES DRAWING MFG-4A DATED 7-12-96

09/04/2019A

SUPERSEDES DRAWING REV - DATED 6/5/2003.

INCRIPTION LAYOUT CENTERING AND TOLERANCE

GENERAL NOTES:

1. ITEM NUMBER IN INSCRIPTION BLOCK REFER TO INSCRIPTION SIZE AND

EMBLEMS OF BELIEF SHOWN ON DRAWING A-EM (SHEETS 1 THROUGH

6) AND A-LFN&OC (SHEETS 1 THROUGH 3).

2. EMBLEM OF BELIEF IS OPTIONAL.

3. ALL GRANITE DIMENSIONAL TOLERANCES ARE ±1/4" UNLESS

OTHERWISE SPECIFIED.

4. THE INSCRIPTION LAYOUT WILL BE CENTERED OFF OF THE CENTERLINE

AS MARKED IN SCENARIOS ABOVE. THE TOLERANCE FOR CENTERING

THE LINES OF INSCRIPTION IS LESS THAN OR EQUAL TO 3/16" ON EACH

SIDE OF THE CENTERLINE.

5. WHEN TWO (2) EMBLEMS OF BELIEF ARE REQUIRED, THE VETERAN'S

EMBLEM IS PLACED ON THE LEFT SIDE AND DEPENDENT EMBLEM TO

THE RIGHT. WHEN THE SECTION AND GRAVESITE NUMBER ARE

REQUIRED, THE CENTERLINE OF THE RIGHT EMBLEM SHALL BE 1 3/4"

FROM THE SECTION CHARACTER AND THE LEFT EMBLEM IS TO MOVE

AN EQUAL OPPOSITE DISTANCE.

STANDARD INSCRIPTION

SCALE: 3"=1'-0"

GRAPHIC SCALE 3" = 1'-0"

0 0.5 1

A-L1.DWG 24" x 36" SHEET

DO NOT SCALE THIS DRAWING

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

4 LINE INSCRIPTION PLACEMENT AND DETAIL

ITEM L4

EMB

ITEM L4

5 LINE INSCRIPTION PLACEMENT AND DETAIL

3 LINE INSCRIPTION PLACEMENT AND DETAIL

REDUCED NAME LINE

4 LINE INSCRIPTION PLACEMENT AND DETAIL

REDUCED NAME LINE

5 LINE INSCRIPTION PLACEMENT AND DETAIL

REDUCED NAME LINE

6 LINE INSCRIPTION PLACEMENT AND DETAIL

WITHOUT EMBLEM OF BELIEF

7 LINE INSCRIPTION PLACEMENT AND DETAIL

WITHOUT EMBLEM OF BELIEF

C E

M E

N T

A I L

18"

5/8"

3/8" RADIUS ±1/16"

TOP AND SIDE EDGES

SEE

NOTE 1

BELOW

5/8" TYP.

LIMITS OF INSCRIPTION AREA

(CONTRACTOR - DO NOT INSCRIBE

THIS LINE - FOR REF. ONLY)

7/8"

TYP.

TYPICAL FACE OF STONE

SCALE: 6"=1'-0"

SIDE VIEW

SCALE: 6"=1'-0"

T Y

EMB

EMB EMB

EMB

ITEM L4

ITEM L4 ITEM L4 ITEM L4 ITEM L4

ITEM L4ITEM L4 ITEM L4 ITEM L4 ITEM L4

ITEM L4

MEMORIAL INSCRIPTION

SCALE: 3"=1'-0"

ITEM L4

ITEM L3

ITEM L4

ITEM L3

ITEM L4

SEE NOTE 5

ITEM L3

ITEM L4

ITEM L3

ITEM L4

2 43 6

ITEM L3

ITEM L4

AutoCAD SHX Text N

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text

ATIONAL

AutoCAD SHX Text

EMETERY

AutoCAD SHX Text

DMINISTRATION

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text R

ITEM L-1

ITEM L-2

Date

Project No.

DrawnMarker Type

Project TitleDrawing Title

DRAWING NO.

Sheet Of

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-LFN&OC-1

1 3

GOVERNMENT HEADSTONES,

MARKERS, AND NICHE COVERS

LETTERS, FONTS, NUMBERS &

OTHER CHARACTERS

Signed

DO NOT SCALE THIS DRAWING

Location

Digital File

A-LFN&OC-1.DWG 24" x 36" SHEET

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

" 1

1 2 3 4 5 6 7 8 9

A B

C D

E F

A B

C D

E F

ITEM L-1 CONTINUED

1 8

42 310

1" = 1" GRAPHIC SCALE

INSCRIPTION

SECTION E-E

STONE

INCISED

E E

TABLE

SEE

"AND" or

AMPERSAND SYMBOL

VIRGULEPARENTHESIS

NOTE 2:

NOTE 1:

DIERESIS

GRAVE ACCENT ACUTE ACCENT TILDE MACRON

THE ABOVE SYMBOLS WILL BE USED WHEN INDICATED ON THE

ORDER FORM. THE SIZE OF THE SYMBOLS WILL BE RELATIVE

TO THE SIZE OF THE LETTERS WITH WHICH THEY ARE USED.

COLON

HYPHENAPOSTROPHE

ROMAN NUMERALS WILL BE USED AS PART OF PROPER NAMES, WORLD WAR DESIGNATIONS OR IN

ANY MANNER INDICATED ON THE ORDER FORM. THEY WILL HAVE THE SAME HEIGHT, INSCRIBED TO THE

SAME DEPTH AS THE LETTERS OF THAT LINE FOR THE INSCRIPTION OF WHICH THEY ARE A PART.

WHEN RAISED, THEY WILL CONFORM IN A LIKE MANNER.

CROSS SECTION DETAIL ACCENT MARKS OTHER CHARACTERS

ROMAN

NUMERALS

ITEM L-2 CONTINUED

REFER TO

DEPTH CHART

BRONZE

RAISED

J J

SECTION J-J

1/64"

NOTE:

KEE/KS STONER

JUNE 13, 2016

Checked

SHOWN IN DRAWINGS RELATED TO SPECIFIC MONUMENT TYPES.

GENERAL NOTES

DateRevisions

TYPE

A-F-1

A-G1/J1/L1

A-MW-1/2/3

1 1/8" 1" 7/8" 3/4"

A-YA

2" OR 3"

MARKER

A-U1-1/2

A-V1/W1

A-XA/XB/XC

7/16" 3/8" 5/8"

L2 L3 L4 L5 L6 L7 EMBLEM

ITEM NAME AND LETTER HEIGHT

LOCATION

DRAWING

G1/J1/L1

A1/C1

V1/W1

XA/XB/XC

N/A N/A N/A N/A N/A4/32" - 5/32" 4/32" - 5/32" 4/32" - 5/32"

6/32" - 8/32" 4/32" - 6/32" 4/32" - 6/32" 6/32" - 8/32"

N/A N/A N/AN/A

7/32" - 9/32" 6/32" - 7/32" 6/32" - 7/32" 7/32" - 9/32"N/A N/A N/AN/A

6/32" - 8/32" 4/32" - 6/32" 4/32" - 6/32" 6/32" - 8/32"

N/A N/A N/AN/A

7/32" - 9/32" 6/32" - 7/32" 6/32" - 7/32" 7/32" - 9/32"N/A N/A N/AN/A

3/16" RAISED AND INSCRIBED

N/A

N/A N/A

N/A

N/AN/A

N/A

A-B1

A-Z1

DEPTH BY MARKER TYPE

N/A

3/32" 3/32" 3/32"N/A N/A N/A N/A N/A

3/32" 3/32" 3/32"N/A N/A N/AN/AN/A

DEPTH BY TYPE

A-NCIS-1/2 E1/H1/I1

4/32" - 6/32" 4/32" - 6/32" 4/32" - 6/32"5/32" - 7/32" N/A N/A N/A 5/32" - 7/32"

SUPERCEDES REV B - REVERT INSCRIPTION DEPTHS FOR

MARBLE TO PRE-REVISION B DEPTHS. CHANGES ARE IN

BOLD IN DEPTH BY TYPE TABLE.

ADDED L5 & L6 & L7 FONTS, UPDATED

INSCRIPTION TABLE, ADD SHT 2 & 3

MOVED INCISED DETAILS TO SHT 2, DELETED

EMBLEM 50, ADDED ACCENT MARKS &

CHARACTERS

SUPERSEDES DRAWING ID-4 DATED 12-2-99

FOR MARBLE AND GRANITE NICHE COVERS: SMALL CAPITAL LETTERS

WILL BE USED IN THE FOLLOWING MANNER: FOR "C" IN MC DONALD,

"AC" IN MAC DONALD, "R" IN JR, "D" IN 2D LIEUTENANT, "ST" IN

1ST LIEUTENANT, ETC. THEY WILL HAVE THE SAME DEPTH OR RISE

AS THE LARGE LETTERS. THE SIZE OF THE LETTERING WILL BE ITEM

L-3 WHEN USED WITH ITEM L-1 AND ITEM L-4 WHEN USED WITH ITEM

L-3.

THE COTR MAY PROVIDE WRITTEN APPROVAL TO SLIGHTLY REVISE THE

CENTER AREA OF LETTERS, NUMBERS, AND OTHER CHARACTERS TO

PREVENT BLOWOUT.

NOTE: AS OF JUNE 13, 2016 THE DEPTHS SURROUNDED BY BOLD BORDERS SUPERCEDE

DEPTHS WHICH WERE PREVIOUSLY SPECIFIED AND MUST BE FOLLOWED IN LIEU OF DEPTHS

SHOWN IN DRAWINGS RELATED TO SPECIFIC MONUMENT TYPES .

THE MINIMUM DEPTH FOR ALL MARBLE AND GRANITE INSCRIPTIONS IS

4/32”. ANY PART OF ANY INSCRIPTION NOT MEETING THE MINIMUM WILL

BE SUBJECT TO REJECTION.

DrawnCheckedMarker Type

Project TitleDrawing Title

1 2 3 4 5 6 7 8 9

A B

C D

E F

DRAWING NO.

Sheet Of

A B

C D

E F

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-MW-1

1 3

Signed

Location

Digital File

GOVERNMENT HEADSTONES

AND MARKERS

MEMORIAL WALL MARKER

KEE

AUGUST 20, 2019

DateRevisions

ApprovedCheckedDrawn

AE Contractor

CSJ CSJIRN

PLANATE MANAGEMENT GROUP

3631 Ransom Place, Alexandria, VA 22306

Description

7/2/13A

ADDS THIRD SHEET FOR BLANK MARKER,

REARRANGE SHEET NUMBER ORDER, UPDATED

DIMENSIONS/FINISHES/DEFLECTION

8/20/2019B

SUPERSEDES REVISION A DATED 7/2/13. ADD

TOLERANCE TO CENTERED INSCRIPTION LAYOUT

GENERAL NOTES: FOR MARBLE AND GRANITE MEMORIAL WALL MARKERS

1. SMALL CAPITAL LETTERS WILL BE USED FOR ANY LETTER IN THE

INSCRIPTION SHOWN IN LOWER CASE.

2. APPLY BLACK LITHICHROME TO ALL INSCRIBED AREAS IN GRANITE.

UNLESS INSTRUCTED OTHERWISE, DO NOT APPLY LITHICHROME TO

INSCRIPTIONS IN MARBLE.

3. CHARACTERS SMALLER THAN L-5 ARE NOT AUTHORIZED.

4. INSCRIBED LINES MUST BE HORIZONTALLY CENTERED WITH A

TOLERANCE OF LESS THAN OR EQUAL TO 3/16" FROM CENTERLINE OF

MARKER.

5. WHEN TWO EMBLEMS OF BELIEF ARE REQUIRED, THE VETERAN'S

EMBLEM IS PLACED ON THE LEFT AND DEPENDENT EMBLEMS TO THE

RIGHT.

6. PROVIDE SMOOTH 1/8" ROUNDED EDGES ALONG BOTH FRONT AND

BACKSIDES. ROUNDING MUST BE CONSISTENT.

7. PROVIDE CONSISTENT, HONED, 80 GRIT FINISH ON ALL SIX SIDES.

8. DEFLECTION FROM TRUE PLANE MUST BE LESS THAN 1/32".

9. DO NOT INSCRIBE WITHIN 1/2" MARGIN FROM EITHER SIDES OR TOP.

10.EMBLEMS MUST BE TWO (2) INCHES FROM LARGEST POINT TO POINT

MEASUREMENT INCLUSIVE OF ANY SURROUNDING CIRCLES.

A-MW-1.DWG 24" x 36" SHEET

A1 (MARBLE)

C1 (GRANITE)

11. TOLERANCE FOR LENGTH, WIDTH, AND THICKNESS IS +/- 1/32".

12. SURNAME LINE WITH 5/8" (L7) INSCRIPTIONS IS GENERALLY LIMITED

TO NOT MORE THAN 15 CHARACTERS AND SPACES.

13. LINES WITH 7/16" (L5) INSCRIPTIONS ARE GENERALLY LIMITED TO NOT

MORE THAN 25 CHARACTERS AND SPACES.

BLANK MEMORIAL WALL MARKER

11 1/4"

PROFILE

3/4"

SCALE: 12"=1'-0"

DO NOT SCALE THIS DRAWING

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

AutoCAD SHX Text N

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text

ATIONAL

AutoCAD SHX Text

EMETERY

AutoCAD SHX Text

DMINISTRATION

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text R

DrawnCheckedMarker Type

Project TitleDrawing Title

1 2 3 4 5 6 7 8 9

A B

C D

E F

DRAWING NO.

Sheet Of

A B

C D

E F

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-MW-2

2 3

Signed

Location

Digital File

GOVERNMENT HEADSTONES

AND MARKERS

MEMORIAL WALL MARKER

KEE

AUGUST 20, 2019

DateRevisions

ApprovedCheckedDrawn

AE Contractor

CSJ CSJIRN

PLANATE MANAGEMENT GROUP

3631 Ransom Place, Alexandria, VA 22306

Description

7/2/13A

ADDS THIRD SHEET FOR BLANK MARKER,

REARRANGE SHEET NUMBER ORDER, UPDATED

DIMENSIONS/FINISHES/DEFLECTION

8/20/2019B

SUPERSEDES REVISION A DATED 7/2/13. ADD

TOLERANCE TO CENTERED INSCRIPTION LAYOUT

GENERAL NOTES: FOR MARBLE AND GRANITE MEMORIAL WALL MARKERS

1. SMALL CAPITAL LETTERS WILL BE USED FOR ANY LETTER IN THE

INSCRIPTION SHOWN IN LOWER CASE.

2. APPLY BLACK LITHICHROME TO ALL INSCRIBED AREAS IN GRANITE.

UNLESS INSTRUCTED OTHERWISE, DO NOT APPLY LITHICHROME TO

INSCRIPTIONS IN MARBLE.

3. CHARACTERS SMALLER THAN L-5 ARE NOT AUTHORIZED.

4. INSCRIBED LINES MUST BE HORIZONTALLY CENTERED WITH A

TOLERANCE OF LESS THAN OR EQUAL TO 3/16" FROM CENTERLINE OF

MARKER.

5. WHEN TWO EMBLEMS OF BELIEF ARE REQUIRED, THE VETERAN'S

EMBLEM IS PLACED ON THE LEFT AND DEPENDENT EMBLEMS TO THE

RIGHT.

6. PROVIDE SMOOTH 1/8" ROUNDED EDGES ALONG BOTH FRONT AND

BACKSIDES. ROUNDING MUST BE CONSISTENT.

7. PROVIDE CONSISTENT, HONED, 80 GRIT FINISH ON ALL SIX SIDES.

8. DEFLECTION FROM TRUE PLANE MUST BE LESS THAN 1/32".

9. DO NOT INSCRIBE WITHIN 1/2" MARGIN FROM EITHER SIDES OR TOP.

10.EMBLEMS MUST BE TWO (2) INCHES FROM LARGEST POINT TO POINT

MEASUREMENT INCLUSIVE OF ANY SURROUNDING CIRCLES.

A-MW-2.DWG 24" x 36" SHEET

A1 (MARBLE)

C1 (GRANITE)

11. TOLERANCE FOR LENGTH, WIDTH, AND THICKNESS IS +/- 1/32".

12. SURNAME LINE WITH 5/8" (L7) INSCRIPTIONS IS GENERALLY LIMITED

TO NOT MORE THAN 15 CHARACTERS AND SPACES.

13. LINES WITH 7/16" (L5) INSCRIPTIONS ARE GENERALLY LIMITED TO NOT

MORE THAN 25 CHARACTERS AND SPACES.

DO NOT SCALE THIS DRAWING

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

6 LINE OPTION

EQUAL

5 LINE OPTION

7 LINE OPTION 7 LINE OPTION

11 1/4"

5 5/8"

EQUAL

1/2" 1/2"

11 1/4"

5 5/8"

1/2" 1/2"

11 1/4"

5 5/8"

1/2" 1/2"

11 1/4"

5 5/8"

1/2" 1/2"

SCALE: 9"=1'-0" SCALE: 9"=1'-0"

SCALE: 9"=1'-0"SCALE: 9"=1'-0"

AutoCAD SHX Text N

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text

ATIONAL

AutoCAD SHX Text

EMETERY

AutoCAD SHX Text

DMINISTRATION

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text R

DrawnCheckedMarker Type

Project TitleDrawing Title

1 2 3 4 5 6 7 8 9

A B

C D

E F

DRAWING NO.

Sheet Of

A B

C D

E F

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-MW-3

3 3

Signed

Location

Digital File

GOVERNMENT HEADSTONES

AND MARKERS

MEMORIAL WALL MARKER

KEE

AUGUST 20, 2019

DateRevisions

ApprovedCheckedDrawn

AE Contractor

CSJ CSJIRN

PLANATE MANAGEMENT GROUP

3631 Ransom Place, Alexandria, VA 22306

Description

7/2/13A

ADDS THIRD SHEET FOR BLANK MARKER,

REARRANGE SHEET NUMBER ORDER, UPDATED

DIMENSIONS/FINISHES/DEFLECTION

8/20/2019B

SUPERSEDES REVISION A DATED 7/2/13. ADD

TOLERANCE TO CENTERED INSCRIPTION LAYOUT

GENERAL NOTES: FOR MARBLE AND GRANITE MEMORIAL WALL MARKERS

1. SMALL CAPITAL LETTERS WILL BE USED FOR ANY LETTER IN THE

INSCRIPTION SHOWN IN LOWER CASE.

2. APPLY BLACK LITHICHROME TO ALL INSCRIBED AREAS IN GRANITE.

UNLESS INSTRUCTED OTHERWISE, DO NOT APPLY LITHICHROME TO

INSCRIPTIONS IN MARBLE.

3. CHARACTERS SMALLER THAN L-5 ARE NOT AUTHORIZED.

4. INSCRIBED LINES MUST BE HORIZONTALLY CENTERED WITH A

TOLERANCE OF LESS THAN OR EQUAL TO 3/16" FROM CENTERLINE OF

MARKER.

5. WHEN TWO EMBLEMS OF BELIEF ARE REQUIRED, THE VETERAN'S

EMBLEM IS PLACED ON THE LEFT AND DEPENDENT EMBLEMS TO THE

RIGHT.

6. PROVIDE SMOOTH 1/8" ROUNDED EDGES ALONG BOTH FRONT AND

BACKSIDES. ROUNDING MUST BE CONSISTENT.

7. PROVIDE CONSISTENT, HONED, 80 GRIT FINISH ON ALL SIX SIDES.

8. DEFLECTION FROM TRUE PLANE MUST BE LESS THAN 1/32".

9. DO NOT INSCRIBE WITHIN 1/2" MARGIN FROM EITHER SIDES OR TOP.

10.EMBLEMS MUST BE TWO (2) INCHES FROM LARGEST POINT TO POINT

MEASUREMENT INCLUSIVE OF ANY SURROUNDING CIRCLES.

A-MW-3.DWG 24" x 36" SHEET

A1 (MARBLE)

C1 (GRANITE)

11. TOLERANCE FOR LENGTH, WIDTH, AND THICKNESS IS +/- 1/32".

12. SURNAME LINE WITH 5/8" (L7) INSCRIPTIONS IS GENERALLY LIMITED

TO NOT MORE THAN 15 CHARACTERS AND SPACES.

13. LINES WITH 7/16" (L5) INSCRIPTIONS ARE GENERALLY LIMITED TO NOT

MORE THAN 25 CHARACTERS AND SPACES.

DO NOT SCALE THIS DRAWING

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

6 LINE OPTION

5 LINE OPTION

7 LINE OPTION 7 LINE OPTION

11 1/4"

1/2" 1/2"

11 1/4"

5 5/8"

1/2" 1/2"

11 1/4"

5 5/8"

1/2" 1/2"

11 1/4"

5 5/8"

1/2" 1/2"

5 5/8"

SCALE: 9"=1'-0" SCALE: 9"=1'-0"

SCALE: 9"=1'-0"SCALE: 9"=1'-0"

AutoCAD SHX Text N

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text

ATIONAL

AutoCAD SHX Text

EMETERY

AutoCAD SHX Text

DMINISTRATION

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text R

SCENARIO NO. 1 SCENARIO NO. 2 SCENARIO NO. 3 SCENARIO NO. 4 SCENARIO NO. 5

SCENARIO NO. 9SCENARIO NO. 8SCENARIO NO. 7SCENARIO NO. 6

Date

Project No.

DrawnCheckedMarker Type

Project TitleDrawing Title

1 2 3 4 5 6 7 8 9

A B

C D

E F

DRAWING NO.

Sheet Of

A B

C D

E F

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-NCIS-1

1 2

Signed

DO NOT SCALE THIS DRAWING

Location

Digital File

A-NCIS-1.DWG 24" x 36" SHEET

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

GOVERNMENT HEADSTONES

AND MARKERS

NICHE COVER INSCRIPTION

KEE

AUGUST 5, 2019

H1, I1

DateRevisions

ApprovedCheckedDrawn

AE Contractor

CSJ CSJIRN

PLANATE MANAGEMENT GROUP

3631 Ransom Place, Alexandria, VA 22306

SCENARIOS

PROCEDURES AND FORMATS FOR INSCRIBING STONE NICHE COVERS

NOT TO SCALE DO NOT SCALE FROM THIS DRAWING

Description

06-05-03---

SUPERSEDES DRAWING NC-2

DATED 11-23-99

10-01-08A

SUPERSEDES DRAWING A-NCIS-1

DATED 06-05-03

07-19-13B

SUPERSEDES DRAWING A-NCIS-1 DATED 10-01-08

ADJUSTS TEXT LAYOUT AND EMBLEM SCENARIOS

08-05-19C

SUPERSEDES DRAWING A-NCIS-2 DATED 11-18-2013

INSCRIPTION LAYOUT CENTERING AND TOLERANCE

GENERAL NOTES:

1. The family's surname is always shown on the first line (immediately below the religious emblem).

2. The veteran's identification is always shown following the surname, even if the veteran is not the first family decedent. The remaining inscriptions are done in a manner which will accept inscriptions of required information for subsequent family decendents. This manner of inscribing niche covers will preclude the need for destroying covers to accommodate inscriptions for family members and will, in all cases, show appropriate veteran recognition.

3. Above are scenarios to demonstrate inscription formats and procedures. They are based on the maximum allowable number of lines being 10 when an emblen of belief is included.

4. The inscription layout will be centered off of the centerline as marked in scenarios 2 & 8 above. The tolerance for centering the lines of inscriptions is less than or equal to 3/16" on each side of the centerline.

5. The space between the Date of Birth and Date of Death shall be 2" and centered horizontally on marker face.

6. The space between the Rank and Branch of Service shall be 1 1/2" and centered horizontally on marker face.

7. The space between two Emblems of Belief shall be 5" and centered horizontally on marker face.

8. For niche covers E1, H1, and I1 reference drawing(s) A-LFN&OC-1/2/3 for font specifications and inscription depth.

SCENARIO NO. 1 - The veteran predeceased the non-veteran spouse.

SCENARIO NO. 2 - The veteran predeceased non-veteran spouse (Scenario

No. 1). The spouse is then subsequently inurned with the veteran. The spouse's given name and years of birth and death are then field inscribed.

SCENARIO NO. 3 - The non-veteran spouse predeceased the veteran. The veteran's given name, rank and branch are inscribed at the time of interment of the spouse. Spouse is provided to inscribe the veteran's years of birth and death, and war periods, in the future.

SCENARIO NO. 4 - The non-veteran spouse predeceased the veteran. The veteran is then subsequently interred with the spouse. The veteran's years of birth and death are field inscribed.

SCENARIO NO. 5 - The veteran predeceased the veteran spouse. The surviving veteran's given name, rank and branch of service are also inscribed for veteran recognition.

SCENARIO NO. 6 - The veteran predeceased the veteran's spouse. The veteran's spouse is then subsequently interred with veteran. The second veteran's years of birth and death and war periods are then field inscribed.

SCENARIO NO. 7 - A dependent child predeceased the veteran and spouse.

The veteran's given name, rank and branch are inscribed at the time of the dependent's internment. Space is provided for later addition of years of birth and death and war periods for the veteran.

SCENARIO NO. 8 - A dependent child predeceased the veteran and the spouse. The veteran was subsequently interred with the dependent child. The veteran's years of birth and death and war periods are then field inscribed.

SCENARIO NO. 9 - This is the same scenario as Scenario No. 16, however, there is no Emblem of Belief.

1 1/2"1 1/2"

3/4"

ROSETTE

(TYPICAL 1" DIA. ALL CORNERS)

7/16" DIA. HOLE

(TYPICAL ALL CORNERS)

1 1/4"

AutoCAD SHX Text N

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text

ATIONAL

AutoCAD SHX Text

EMETERY

AutoCAD SHX Text

DMINISTRATION

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text A

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text A

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text T

AutoCAD SHX Text O

AutoCAD SHX Text F

AutoCAD SHX Text V

AutoCAD SHX Text E

AutoCAD SHX Text T

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text A

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text A

AutoCAD SHX Text F

AutoCAD SHX Text A

AutoCAD SHX Text I

AutoCAD SHX Text R

SCENARIO NO. 10

SCENARIO NO. 15

SCENARIO NO. 11

SCENARIO NO. 16

SCENARIO NO. 12

SCENARIO NO. 17

SCENARIO NO. 13

SCENARIO NO. 18

SCENARIO NO. 14

SCENARIO NO. 19

Date

Project No.

DrawnCheckedMarker Type

Project TitleDrawing Title

1 2 3 4 5 6 7 8 9

A B

C D

E F

DRAWING NO.

Sheet Of

A B

C D

E F

Approved: Director, Memorial Programs Service

Approved: Chief of Operations, Memorial Programs Service

A-NCIS-2

2 2

Signed

DO NOT SCALE THIS DRAWING

Location

Digital File

A-NCIS-2.DWG 24" x 36" SHEET

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY

GOVERNMENT HEADSTONES

AND MARKERS

NICHE COVER INSCRIPTION

KEE

AUGUST 5, 2019

H1, I1

DateRevisions

ApprovedCheckedDrawn

AE Contractor

CSJ CSJIRN

PLANATE MANAGEMENT GROUP

3631 Ransom Place, Alexandria, VA 22306

SCENARIOS

PROCEDURES AND FORMATS FOR INSCRIBING STONE NICHE COVERS

NOT TO SCALE DO NOT SCALE FROM THIS DRAWING

Description

06-05-03---

SUPERSEDES DRAWING NC-2

DATED 11-23-99

10-01-08A

SUPERSEDES DRAWING A-NCIS-2

DATED 06-05-03

07-19-13B

SUPERSEDES DRAWING A-NCIS-2 DATED 10-01-08

ADJUSTS TEXT LAYOUT AND EMBLEM SCENARIOS

08-05-19C

SUPERSEDES DRAWING A-NCIS-2 DATED 11-18-2013

INSCRIPTION LAYOUT CENTERING AND TOLERANCE

GENERAL NOTES:

1. The family's surname is always shown on the first line (immediately below the religious emblem).

3. Below are scenarios to demonstrate inscription formats and procedures based on the maximum allowable number of lines being 10 when an emblem of belief is included.

4. The space between the Rank and Branch of Service shall be 1 1/2" and centered horizontally on marker face.

5. The space between the Date of Birth and Date of Death shall be 2" and centered horizontally on marker face.

6. The space between two Emblems of Belief shall be 3" and centered horizontally on marker face.

7. For niche covers E1, H1, and I1 reference drawing(s) A-LFN&OC-1/2/3 for font specifications and inscription depth.

8. The inscription layout will be centered off of the centerline as marked in scenarios 14 & 18 above. The tolerance for centering the lines of inscription is less than or equal to 3/16" on each side of the centerline.

death and war periods.

SCENARIO NO. 12 - A dependent child predeceased the veteran and the spouse. The non-veteran spouse was subsequently interred with the dependent child (Scenario No. 10). The veteran was then subsequently interred with the dependent child and the non-veteran spouse. The veteran's years of birth and death and war periods are then field inscribed.

SCENARIO NO. 13 - Same scenario as Scenario No. 11, however, the non-veteran spouse had retained her maiden surname.

SCENARIO NO. 14 - The non-veteran spouse predeceased the veteran. The spouse and the veteran are not the same religion. The symbol for the spouse's religion is inscribed immediately above the spouse's given name. Space has been provided for the future addition of the veteran's years of birth and death, and war periods. The spouses religious emblem shall be a full 2" emblem.

SCENARIO NO. 15 - The non-veteran spouse predeceased the veteran. Space is made available for the future inscription of the veteran's years of birth and death, as well as war periods and valor awards if known at the time of the spouse's interment.

SCENARIO NO. 16 - The non-veteran spouse predeceased the veteran. Valor awards were known at the time of the spouse's inurnment. The veteran is then subsequently interred with the spouse. The veteran's years of birth and death, war periods and valor awards are then field inscribed.

SCENARIO NO.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Aug 25, 2020.