RFQ N68335-25-Q-0254-0004 Conformed.pdf

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER) 1

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED RATING

DO-C9N6833525Q0254 19-May-2025 5a. ISSUED BY

8. TO: NAME AND ADDRESS, INCLUDING ZIP CODE

SEE SCHEDULE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this

Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State, and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e) (f)

SEE SCHEDULE

AMOUNT

% No. %

NOTE: Additional provisions and representations [ ] are [ ] are not attached.

13. NAME AND ADDRESS OF QUOTER (Street, City, County, State, and ZIP Code)

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

15. DATE OF

QUOTATION

16. NAME AND TITLE OF SIGNER (Type or print) (Include area code)

TELEPHONE NO.

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (REV. 6-95)

PREVIOUS EDITION NOT USABLE Prescribed by GSA FAR (48 CFR) 53.215-1(a)

THIS RFQ X[ ] IS [ ] IS NOT A SMALL BUSINESS SET-ASIDE

6. DELIVER BY (Date)

SEE SCHEDULE

AND/OR DMS REG. 1

UNDER BDSA REG. 2

4. CERT. FOR NAT. DEF.3. REQUISITION/PURCHASE

REQUEST NO.

NAVAL AIR WARFARE CENTER AD (LKE)

PROCUREMENT DEPARTMENT BL56000

HWY 547, BUILDING 120-207

LAKEHURST NJ 08733-5082

9. DESTINATION (Consignee and address, including ZIP Code)

7. DELIVERY

[ ]X FOB

DESTINATION

[ ] OTHER

(See Schedule)

07-Aug-2025(Date)

PLEASE FURNISH QUOTATIONS TO THE ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS:10.

MAIREN FLANAGAN

(Name and Telephone no.) (No collect calls)5b. FOR INFORMATION CALL:

d. CALENDAR DAYSc. 30 CALENDAR DAYSb. 20 CALENDAR DAYS12. DISCOUNT FOR PROMPT PAYMENT a. 10 CALENDAR DAYS

N6833525Q0254

Section A - Solicitation/Contract Form

SUPPLEMENTARY INFORMATION

Amendment 0004: The purpose of this solicitation amendment is to extend the quotation submission deadline from 30 July 2025 to 7 August 2025.

Amendment 0003: The purpose of this solicitation amendment is to incorporate the following question received from industry, and corresponding Government response:

Question: What products are the Government considering as calibrated end items?

Response: The hydrometer, P/N: GW2535, is the only calibrated item in the set. Calibration stickers should be provided for this end item in accordance with the SOW.

Amendment 0002: The purpose of this solicitation amendment is to incorporate the revised SOW dated 10 July 2025, and extend the drawing request deadline and quotation submission dates. The following changes are incorporated as a result of this amendment:

Revised SOW incorporated into Section C.

CDRL A002- Calibration Certificates added as an attachment to Section J.

Data CLINs 0002, 1002 and 2002 revised to include CDRL A002.

Drawing request deadline extended from 29 May 2025 to 22 July 2025.

Quotation submission deadline extended from 2 June 2025 to 30 July 2025.

Amendment 0001: The purpose of this solicitation amendment is to incorporate the following question received from industry, and corresponding Government response:

Question: Is the Government only considering glass hydrometers, or also digital density meters?

Response: The Government is not considering digital density meters. A Technical Data Package (TDP) has been provided for this requirement, and items offered must confirm to the specifications laid forth in the TDP and Statement of Work.

Procurement Point of Contact:

Mairen Flanagan Email: mairen.e.flanagan.civ@us.navy.mil Phone: 732-796-3606

This requirement is solicited as a 100% Total Small Business Set-Aside. This solicitation is for the competitive procurement of the Fuel Density Measurement Set, Part Number (P/N) 4106AS0290-1 and NSN:2915-01-725-8712 in support of the MQ-4C Triton Unmanned Aircraft Systems (UAS) Program, United States Navy.

It is anticipated that this solicitation will result in a single-award, three-year, Fixed-Price Indefinite Delivery/Indefinite Quantity (IDIQ) type contract.

Delivery Orders may be placed as follows:

Ordering Year 1 Contract Line Items (CLINs) from date of contract award through 365 days after contract award.

Ordering Year 2 CLINs from 366 days after contract award through 730 days after contract award.

Ordering Year 3 CLINs from 731 days after contract award through 1,095 days after contract award.

The IDIQ guaranteed minimum quantity is fifteen (15) units, and will be placed on the first delivery order concurrent with award of the IDIQ contract. The Government will not be obligated to order any quantities beyond the guaranteed minimum over the life of the contract.

The minimum and maximum quantities are found in clauses BTXT.216-9506, Minimum and Maximum Quantities (NAVAIR) and 52.216-19, Order Limitations.

Registration in the System for Award management (SAM) shall be a prerequisite for award. For more information on the SAM database, refer to the SAM website at https://sam.gov.

RELEASE OF TECHNICAL DATA PACKAGE: This program includes information that is only releasable to current and approved Department of Defense (DoD) contractors. In addition, the program requires a procurement effort in certain critical technologies/data that are not releasable to foreign firms. Some documents are under Federal export control for “sensitive” or “controlled” technologies regulated by the U.S. Department of State International Traffic in Arms Regulations (ITAR) protecting national security. Data may not be exported without an approval, authorization, or license under E.O. 12470 or the Arms Export Control Act. Disclosure of the control drawings requires the verification of a current license for the oral, visual or documentary disclosure of technical data by U.S.

persons to foreign persons as defined under the U.S. Department website: http://pmdtc.org/licenses.htm. Please note the following applicable clauses: DFARS 252.225-7048 - Export-Controlled Items (JUN 2013) and NAVAIR LTXT.227-9508 – Qualified U.S. Contractors for Export-Controlled Technical Data (APR 1998).

Accordingly, the drawing package associated with this solicitation will NOT be posted with this solicitation.

Offerors interested in receiving the necessary technical data for quotation preparation purposes MUST submit a written request, including a copy of a valid, current DD Form 2345 (Military Critical Technical Data Agreement) to Mairen Flanagan at mairen.e.flanagan.civ@us.navy.mil no later than 22 July 2025 at 4:00 PM EDT. Late requests may not be considered, and the solicitation period may not be extended to accommodate late requests.

DD Forms 2345 will be reviewed and, if found valid and complete, download instructions will be sent electronically to the designated data custodian through the DoD SAFE web application at https://safe.apps.mil/. Drawings will not be supplied to requestors who do not submit a Joint Certification Program verified DD Form 2345. For more information on Form DD2345, contact the Joint Certification Program by email at JCP-ADMIN@DLA.MIL or by phone at (877) 352- 2255. The Joint Certification Program website and FAQs are available at https://www.dla.mil/Logistics-Operations/Services/JCP/.

TECHNICAL DATA PACKAGE COMPOSITION: Unless otherwise stated, the Technical Data Package comprises all documents/drawings provided, inclusive of all references to military standards, sub-documents, and sub-drawings.

BUY AMERICAN ACT COMPLIANCE: By submitting an Offer in response to this solicitation, your firm certifies that it is made in compliance with the Buy American Act (41 U.S.C. 10a-10d).

RECEIPT OF CORRESPONDENCE: All correspondence pertaining to this solicitation shall be submitted to Mairen Flanagan at mairen.e.flanagan.civ@us.navy.mil at the earliest time possible to enable the Government to respond, but no later than 28 July at 4:00 PM EDT. All correspondence submitted shall be reviewed, and responses will be provided in Q&A format as an amendment to the solicitation, publicized on SAM.gov for all of industry to view.

Section B - Supplies or Services and Prices

IDIQ CONTRACTS

The maximum quantities identified herein for each CLIN represent the Government’s best estimate of the maximum quantities of anticipated order(s) during that specific ordering period. The CLIN quantity maximums do not impose absolute quantity limits for each ordering period. The maximum quantities for each item of support equipment are not defined on an annual ordering period basis, but rather are defined by the sum of quantities across the three year IDIQ contract.

ITEM NO SUPPLIES/SERVICES MAX

QUANTITY

UNIT UNIT PRICE MAX AMOUNT

0001 20 Each Fuel Density Measurement Set, Year 1

FFP

Fuel Density Measurement Set, P/N: 4106AS0290-1, in accordance with the Statement of Work and applicable drawings.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

NSN: 2915-01-725-8712

DWG NR: 4106AS0290

MFR PART NR: 4106AS0290-1

PSC CD: 2915

MAX

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 1 Lot Data for CLIN 0001

FFP

Contract Data Requirements List A001 - Request for Variance, and A002- Calibration Certificate, in accordance with the Statement of Work and contract attachments.

FOB: Destination

UNIT UNIT PRICE MAX AMOUNT

1001 5 Each Fuel Density Measurement Set, Year 2

FFP

Fuel Density Measurement Set, P/N: 4106AS0290-1, in accordance with the Statement of Work and applicable drawings.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

NSN: 2915-01-725-8712

DWG NR: 4106AS0290

1002 1 Lot Data for CLIN 1001

FFP

Contract Data Requirements List A001 - Request for Variance, and A002- Calibration Certificate, in accordance with the Statement of Work and contract attachments.

UNIT UNIT PRICE MAX AMOUNT

2001 5 Each Fuel Density Measurement Set, Year 3

FFP

Fuel Density Measurement Set, P/N: 4106AS0290-1, in accordance with the Statement of Work and applicable drawings.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

NSN: 2915-01-725-8712

DWG NR: 4106AS0290

2002 1 Lot Data for CLIN 2001

FFP

Contract Data Requirements List A001 - Request for Variance, and A002- Calibration Certificate, in accordance with the Statement of Work and contract attachments.

CLAUSES INCORPORATED BY FULL TEXT

BTXT.216-9506 MINIMUM AND MAXIMUM QUANTITIES (NAVAIR)(MAR 1999)

As referred to in paragraph (b) of FAR 52.216-22 " Indefinite Quantity" of this contract, the contract minimum quantity is 15 units; the maximum quantity is 30 units.

Section C - Descriptions and Specifications

STATEMENT OF WORK

Statement of Work For Fuel Density Measurement Set

10 July 2025

1.0 SCOPE

This Statement of Work (SOW) addresses the requirements and tasks associated with the production and delivery of the Fuel Density Measurement Set, PN: 4106AS0290-1, NSN: 2915- 01-725-8712 for MQ-4C Triton Unmanned Aircraft Systems (UAS) Program in support of the United States Navy (USN).

The Fuel Density Measurement Set, PN: 4106AS0290-1 NSN: 2915-01-725-8712, is used to determine the density of the fuel used in the Triton Unmanned Aircraft. The Fuel Density Measurement Set can measure the specific gravity of a fuel sample and is mobile, compact, weather resistant, and is capable of operating in close proximity to the aircraft and during inclement weather. Fuel Density Measurement Set includes a glass hydrometer and a polyethylenetene hydrometer jar in a transit case with custom cut foam. Specific gravity values between 0.650 and 1.000 and have scale divisions of 0.005. The hydrometer jar has a 500-milliliter capacity and a tube diameter of 2 inches.

1.1 Applicable Documents:

a. MIL-STD-130N - Identification Marking of U.S. Military Property

b. Drawing #3909AS9999 Rev C- Identification Plate for Support Equipment/UID

Markings

c. ASTM D3951-18 - Standard Practice for Commercial Packaging

d. MIL-STD-129R - Military Marking for Shipment and Storage

e. MIL-STD-1366E - Transportability Criteria

f. Drawing Package Number 4106AS0290

2.0 REQUIREMENTS

2.1 General

The contractor shall manufacture and deliver Fuel Density Measurement Set PN: 4106AS0290-1 NSN: 2915-01-725-8712 In Accordance With (IAW) this SOW, Government furnished drawing package and the requirements of the contract.

The program is requesting a three (3)-year Indefinite Delivery/Indefinite Quantity (IDIQ) type contract.

Part Number NSN Nomenclature Year 1

Year 2

Year 3

4106AS0290-1 2915-01-725-8712

Fuel Density

Measurement Set 20 5 5

Year 1 pricing valid from date of award through 365 days.

Year 2 pricing valid from 366 days through 730 days Year 3 pricing valid from 731 days through 1095 days.

2.2 Quality Assurance (QA)

The contractor’s QA system shall be able to ensure that manufactured configuration items are built to print, functional, and reliably made in accordance with controlling technical drawings, specifications and standards. Each item manufactured as part of this contract shall have passed a Government final inspection prior to WAWF Receiving Report acceptance.

2.3 Certificate of Conformance (CoC)

The Contractor shall provide a CoC with each end item certifying that it conforms to the government-drawing package, this SOW and the requirements of the contract. The COC shall be on company letterhead and signed by management. Each CoC shall identify the part number and serial number. If any of the end items are found to be non-conforming, it shall be replaced at the Contractor’s expense.

2.4 Serial Numbers

The contractor shall assign a serial number for Support Equipment end item. A unique serial number as defined in the drawing is required for each item.

2.5 Government Inspection and Acceptance

Government Inspection and Acceptance shall be accomplished at destination by designated representatives.

2.6 Item Unique Identification (IUID) Marking of US Military Property In accordance with DFARS Clause 252.211-7003 Item Identification and valuation, the Contractor is required to mark and register all end items and their components meeting the requirements called out in MIL-STD-130N. These include components for which the Governments unit acquisition cost is $5,000 or greater, or any component, subassembly or embedded part that is serially managed, mission essential or a controlled inventory item.

2.6.1 Construct and Method

Details on creating the UID and the marking method are contained in MIL-STD-130N. The UID shall be Construct #2.

2.6.2 UID Location and Marking

The locations and marking methods selected should bear no impact on the performance of the part and minimal configuration change(s) to the part.

2.6.3 Permanency and Legibility

The UID marking and identification plates, tags, or labels when used on equipment, parts, assemblies, subassemblies, units, sets, or groups shall be permanent during the normal life expectancy of the item and be capable of withstanding the environmental test and cleaning procedures specified for the item. Legibility shall be as required for ready readability as per MIL-

STD-130N.

2.6.4 UID Registration

The prime Contractor has the responsibility to furnish Item Unique Identification (IUID) data to the IUID registry. Data submission of IUID data and acquisition cost should be via Wide Area Work Flow (WAWF), IUID XML file, IUID flat file or web entry. Additional information regarding data submission as well as the actual marking can be found at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

2.6.5 Records

The Contractor shall maintain an accurate, current list of UIDs for all manufactured items on this contract and supply to the Government upon request. The list shall include P/N, Serial #, CAGE, UID Location, Construct used, how it was marked, and the registration method used.

3.0 CONTRACT DATA REQUIREMENTS LIST - (CDRL)

3.1 Request for Variance (RFV) - (CDRL A001)

When identified, the contractor shall submit to the government for approval recommendations for a RFV. Any proposed design changes affecting form, fit, and/or function of the Peculiar Support Equipment (PSE) (including enhancements) that deviate from drawings provided should be identified prior to the fabrication process and will be reviewed by the cognizant UAS Support Equipment Lead Engineer for approval/disapproval. The contractor shall submit to the Government for approval an RFV to request deviations from the contractually specified design configuration. The contractor is advised to consult MIL-HDBK-61 Configuration Management for guidance when contemplating submitting an RFV. These change requests shall be prepared and submitted to the Government IAW CDRL A001. Once approved, the RFV will be incorporated via contract modification, which authorizes and approves the RFV. No work associated with the RFV shall commence until a fully executed contract modification is received.

3.2 Calibration - (CDRL A002)

Each calibrated Support Equipment end item shall be calibrated and have a calibration sticker from the original equipment manufacturer. A signed calibration certificate traceable to National Institute of Standards and Technology (N.I.S.T.), which shall include the date of calibration, serial number and part number of the unit tested, shall be provided for each unit purchased. The calibration sticker shall as a minimum include calibration by, calibration date and calibration due date. See CDRL A002.

4.0 PACKAGING, PRESERVATION AND SHIPPING

4.1 Packaging

Preserve, and pack for shipment in accordance with the MIL-STD-2073-1E, “Standard Practice for Military Packaging,” using the detailed Packaging Requirements Code specified below.

Packaging Requirements Code:

PN MOP CL PM WM CM CT UC

QUP

4106AS0290-1 10 1 00 00 AD 0 ED 001

The use of loose fill materials, asbestos, excelsior, newspaper and shredded paper (all types) are prohibited. In addition, all Wood Packaging Materials (WPM) shall be heat treated or chemically treated in accordance with the requirements of the International Standard for Phytosanitary Measures (ISPM) 15, "Regulation of Wood Packaging Material in International Trade."

The contractor shall package and ship each item individually.

4.2 Marking

Marking shall be in accordance with MIL-STD-129R.

Additionally, special marking labels (fragile, delicate, etc.) shall be applied to all unit, intermediate and shipping containers as an integral part of the total pack. The contractor shall select the appropriate special marking label (s) as additional means to protect the items during packaging, handling, storage, transit and removal from the pack.

4.3 Transportation

Ensure safe transportation of packaged items at the lowest rate to the point of delivery and shall meet, as a minimum, the requirements of the following rules and regulations, as applicable to the mode(s) of transportation to be utilized:

(a) Postal Regulations

(b) Department of Transportation Regulations

(c) Civil Air Regulations

(d) Uniform Freight Classification Rules

(e) National Motor Freight Classification Rules

(f) American Truckers' Association Rules

(g) Other applicable carriers' rules

(h) Military Air Regulations for dangerous materials

Consolidation of Shipments. All exterior packs of 1.5 cubic feet or less having no single dimension (length, width, height) exceeding 40 inches (and when the total number of such containers in any individual shipment exceeds 25), shall be unitized in accordance with ASTM D3951-18.

Dangerous goods shall be prepared for shipment according to applicable Department of Transportation (DOT) regulations and international regulations in effect at time of shipment.

Shipments by parcel post shall comply with Postal Regulations.

Transportation Shipments

FOB Destination

a. For FOB Destination contracts, consignment address information is available electronically at the DoD Activity Address Codes (DODAAC) website:

https://www.daas.dla.mil/daasinq/dodaac.asp?cu=d.

b. For FOB Destination contracts, additional information can be found in the clause NAVSUPWSSLA19 entitled "CONSIGNMENT INSTRUCTIONS." (04-15).

4.4 Shipping Addresses

Base USN Shipments:

NAWCAD Lakehurst SE Staging Facility NAWCAD Lakehurst, Rt. 547

HANGAR 1

Joint Base MDL, NJ 08733 Mark For: MQ-4C USN Program POC: Robert Hull, robert.m.hull30.civ@us.navy.mil.

*No Friday Deliveries

All Follow-on Shipments:

DODAAC: SW310N

DLA Distribution Susquehanna PA Mechanicsburg Receiving West 5450 Carlisle Pike, Bldg. 402 Mechanicsburg, PA 17050-0789

MARK FOR: RIC5Q4 (MQ-4C)

POC: Robert Hull PH: 732-323-4611 Email: robert.m.hull30.civ@us.navy.mil

* For items shipped to Mechanicsburg, PA: The contractor must instruct their carrier to request an appointment with DLA Mechanicsburg by filling out the attached “Prelodge Request Form” and emailing it to Prelodge@dla.mil.

Please note that an appointment is not needed for deliveries going to DLA that are being shipped via UPS, FEDEX, USPS etc. Therefore, the Prelodge form does not need to be completed for those type of shipments

It is preferred that deliveries are made within four (4) to eight (8) months after order receipt.

Early delivery is acceptable and encouraged.

4.5 Shipping Document

The Contractor shall notify Robert Hull, Phone (732) 323-4611, email address:

robert.m.hull30.civ@us.navy.mil the shipment is ready and to confirm the shipping address.

Upon shipment, a copy of the shipping document and tracking documents shall be emailed to robert.m.hull30.civ@us.navy.mil and elizabeth.a.reid16.civ@us.navy.mil.

CTXT.211-9510 CONTRACTOR EMPLOYEES (NAVAIR) (MAY 2011)

(a) In all situations where contractor personnel status is not obvious, all contractor personnel are required to identify themselves to avoid creating an impression to the public, agency officials, or Congress that such contractor personnel are Government officials. This can occur during meeting attendance, through written (letter or email) correspondence or verbal discussions (in person or telephonic), when making presentations, or in other situations where their contractor status is not obvious to third parties. This list is not exhaustive. Therefore, the contractor employee(s) shall:

(1) Not by word or deed give the impression or appearance of being a Government employee;

(2) Wear appropriate badges visible above the waist that identify them as contractor employees when in Government spaces, at a Government-sponsored event, or an event outside normal work spaces in support of the contract/order;

(3) Clearly identify themselves as contractor employees in telephone conversations and in all formal and informal written and electronic correspondence. Identification shall include the name of the company for whom they work;

(4) Identify themselves by name, their company name, if they are a subcontractor the name of the prime contractor their company is supporting, as well as the Government office they are supporting when participating in meetings, conferences, and other interactions in which all parties are not in daily contact with the individual contractor employee; and

(5) Be able to provide, when asked, the full number of the contract/order under which they are performing, and the name of the Contracting Officer’s Representative.

(b) If wearing a badge is a risk to safety and/or security, then an alternative means of identification maybe utilized if endorsed by the Contracting Officer’s Representative and approved by the Contracting Officer.

(c) The Contracting Officer will make final determination of compliance with regulations with regard to proper identification of contractor employees.

Section D - Packaging and Marking

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) Definitions. As used in this clause-

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number;

and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission

(IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract line, subline, or exhibit line item No. Item description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract line, subline, or exhibit line item No. Item description

(If items are identified in the Schedule, insert “See Schedule” in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or

(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL- STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code--

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD unique item identification under paragraph (c)(1)(iii) of this clause, the Contractor shall report as part of, or associated with, the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods--

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) ----, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

DTXT.247-9508 PROHIBITION AND LIMITATIONS FOR PACKAGING MATERIALS

(NAVAIR) (AUG 2019)

The use of loose fill materials, asbestos, excelsior, newspaper and shredded paper (all types) are prohibited. In addition, all Wood Packaging Materials (WPM) shall be heat treated or chemically treated in accordance with the requirements of the International Standards for Phytosanitary Measures (ISPM) 15:2009, "Regulation of Wood Packaging Material in International Trade."

DTXT.247-9514 TECHNICAL DATA PACKING INSTRUCTIONS (NAVAIR)(SEP 1999)

Technical Data and Information shall be packed and packaged for domestic shipment in accordance with best commercial practices. The package or envelope should be clearly marked with any special markings specified in this contract (or delivery/task order), e.g., Contract Number, CLIN, Device No., and document title must be on the outside of the package. Classified reports, data and documentation, if applicable, shall be prepared for shipment in accordance with Defense Industrial Manual for Safeguarding Classified Information, DoD 5220.22M.

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 NAVAIR LAKEHURST

HWY 547

LAKEHURST NJ 08733

Government NAVAIR LAKEHURST

HWY 547

LAKEHURST NJ 08733

Government

0002 NAVAIR LAKEHURST

HWY 547

LAKEHURST NJ 08733

Government NAVAIR LAKEHURST

HWY 547

LAKEHURST NJ 08733

Government

1001 NAVAIR LAKEHURST

HWY 547

LAKEHURST NJ 08733

Government NAVAIR LAKEHURST

HWY 547

LAKEHURST NJ 08733

Government

1002 NAVAIR LAKEHURST

HWY 547

LAKEHURST NJ 08733

Government NAVAIR LAKEHURST

HWY 547

LAKEHURST NJ 08733

Government

2001 NAVAIR LAKEHURST

HWY 547

LAKEHURST NJ 08733

Government NAVAIR LAKEHURST

HWY 547

LAKEHURST NJ 08733

Government

2002 NAVAIR LAKEHURST

HWY 547

LAKEHURST NJ 08733

Government NAVAIR LAKEHURST

HWY 547

LAKEHURST NJ 08733

Government

CLAUSES INCORPORATED BY REFERENCE

52.246-2 Inspection Of Supplies--Fixed Price AUG 1996

ETXT.246-9512 INSPECTION AND ACCEPTANCE (NAVAIR)(OCT 2005)

(a) Inspection and acceptance of the supplies or services to be furnished hereunder shall be performed by an authorized Government representative.

(b) Acceptance of all Contract Line Items/Sub Line Items (CLINs/SLINs) shall be made by signature of the accepting authority on a DD 250 submitted through the WAWF system. Acceptance will only occur when the accepting authority is sure that inspections performed demonstrate compliance with contract requirements.

ETXT.246-9514 INSPECTION AND ACCEPTANCE OF TECHNICAL DATA AND INFORMATION

(NAVAIR)(FEB 1995)

Inspection and acceptance of technical data and information will be performed by the Procuring Contracting Officer (PCO) or his duly authorized representative. Inspection of technical data and information will be performed by ensuring successful completion of the requirements set forth in the DD Form 1423, Contract Data Requirements

List (CDRL) and incorporation/resolution of Government review comments on the data items. Acceptance will be evidenced by execution of an unconditional DD Form 250, Material Inspection and Receiving Report, as appropriate, and/or upon receipt of a second endorsement acceptance by the PCO on the attachment to this contract entitled N/A. The attached form will not be used for high cost data such as drawings, specifications, and technical manuals.

Section F - Deliveries or Performance

ACCELERATED DELIVERY

Accelerated delivery to the greatest extent possible in advance of the specified delivery schedule is acceptable and encouraged. Any accelerated delivery shall be at no additional cost to the Government.

52.242-17 Government Delay Of Work APR 1984 52.246-15 Certificate of Conformance APR 1984 52.247-34 F.O.B. Destination JAN 1991

52.211-9 DESIRED AND REQUIRED TIME OF DELIVERY (JUN 1997)

(a) The Government desires delivery to be made according to the following schedule:

DESIRED DELIVERY SCHEDULE

CLIN EST. MAX

QUANTITY

DATE DELIVERY ADDRESS

0001 20 Each Delivery preferred within 4 months after date of order

NAWCAD Lakehurst SE Staging Facility NAWCAD Lakehurst, Rt. 547

HANGAR 1

Joint Base MDL, NJ 08733 Mark For: MQ-4C USN Program POC: Robert Hull, robert.m.hull30.civ@us.navy.mil

*No Friday Deliveries

0002 1 Lot As specified on the individual Contract Data Requirements List

(CDRL)

As specified on the individual Contract Data Requirements List (CDRL)

1001 5 Each Delivery preferred within 4 months after date of order

DODAAC: SW310N

DLA Distribution Susquehanna PA Mechanicsburg Receiving West 5450 Carlisle Pike, Bldg. 402 Mechanicsburg, PA 17050-0789

MARK FOR: RIC5Q4 (MQ-4C)

POC: Robert Hull PH: 732-323-4611 Email: robert.m.hull30.civ@us.navy.mil

1002 1 Lot As specified on the individual Contract Data Requirements List

(CDRL)

As specified on the individual Contract Data Requirements List (CDRL)

2001 5 Each Delivery preferred within 4 months after date of order

DODAAC: SW310N

DLA Distribution Susquehanna PA Mechanicsburg Receiving West 5450 Carlisle Pike, Bldg. 402 Mechanicsburg, PA 17050-0789

MARK FOR: RIC5Q4 (MQ-4C)

POC: Robert Hull PH: 732-323-4611 Email: robert.m.hull30.civ@us.navy.mil

2002 1 Lot As specified on the individual Contract Data Requirements List

(CDRL)

As specified on the individual Contract Data Requirements List (CDRL)

If the offeror is unable to meet the desired delivery schedule, it may, without prejudicing evaluation of its offer, propose a delivery schedule below. However, the offeror's proposed delivery schedule must not extend beyond the time for delivery in the Government's required delivery schedule as follows:

REQUIRED DELIVERY SCHEDULE

CLIN EST. MAX

DATE DELIVERY ADDRESS

0001 20 Each Delivery required within 8 months after date of order

NAWCAD Lakehurst SE Staging Facility NAWCAD Lakehurst, Rt. 547

HANGAR 1

Joint Base MDL, NJ 08733 Mark For: MQ-4C USN Program POC: Robert Hull, robert.m.hull30.civ@us.navy.mil

*No Friday Deliveries

0002 1 Lot As specified on the individual Contract Data Requirements List (CDRL)

As specified on the individual Contract Data Requirements List (CDRL)

1001 5 Each Delivery required within 8 months after date of order

DODAAC: SW310N

DLA Distribution Susquehanna PA Mechanicsburg Receiving West 5450 Carlisle Pike, Bldg. 402 Mechanicsburg, PA 17050-0789

MARK FOR: RIC5Q4 (MQ-4C)

POC: Robert Hull PH: 732-323-4611 Email: robert.m.hull30.civ@us.navy.mil

1002 1 Lot As specified on the individual Contract Data Requirements List (CDRL)

As specified on the individual Contract Data Requirements List (CDRL)

2001 5 Each Delivery required within 8 months after date of order

DODAAC: SW310N

DLA Distribution Susquehanna PA Mechanicsburg Receiving West 5450 Carlisle Pike, Bldg. 402 Mechanicsburg, PA 17050-0789

MARK FOR: RIC5Q4 (MQ-4C)

POC: Robert Hull PH: 732-323-4611 Email: robert.m.hull30.civ@us.navy.mil

2002 1 Lot As specified on the individual Contract Data Requirements List (CDRL)

As specified on the individual Contract Data Requirements List (CDRL)

Offers that propose delivery of a quantity under such terms or conditions that delivery will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. If the offeror proposes no other delivery schedule, the desired delivery schedule above will apply.

OFFEROR'S PROPOSED DELIVERY SCHEDULE

CLIN EST. MAX

DATE DELIVERY ADDRESS

(b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed or otherwise furnished to the successful offeror results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day the award is dated. Therefore, the offeror shall compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor’s date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term “working day” excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected.

FTXT.247-9505 TECHNICAL DATA AND INFORMATION (NAVAIR)(FEB 1995)

Technical Data and Information shall be delivered in accordance with the requirements of the Contract Data Requirements List, DD Form 1423, Exhibit A, attached hereto, and the following:

(a) The contractor shall concurrently deliver technical data and information per DD Form 1423, Blocks 12 and 13 (date of first/subsequent submission) to all activities listed in Block 14 of the DD Form 1423 (distribution and addresses) for each item. Complete addresses for the abbreviations in Block 14 are shown in paragraph (g) below.

Additionally, the technical data shall be delivered to the following cognizant codes, who are listed in Block 6 of the DD Form 1423.

(1) PCO, Code N/A.

(2) ACO, Code N/A.

(b) Partial delivery of data is not acceptable unless specifically authorized on the DD Form 1423, or unless approved in writing by the PCO.

(c) The Government review period provided on the DD Form 1423 for each item commences upon receipt of all required data by the technical activity designated in Block 6.

(d) A copy of all other correspondence addressed to the Contracting Officer relating to data item requirements (i.e., status of delivery) shall also be provided to the codes reflected above and the technical activity responsible for the data item per Block 6, if not one of the activities listed above.

(e) The PCO reserves the right to issue unilateral modifications to change the destination codes and addresses for all technical data and information at no additional cost to the Government.

(f) Unless otherwise specified in writing, rejected data items shall be resubmitted within thirty (30) days after receipt of notice of rejection.

(g) DD Form 1423, Block 14 Mailing Addresses: See Exhibit A.

Section G - Contract Administration Data

252.204-7022 Expediting Contract Closeout MAY 2021 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232- 7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor…