N68335-19-R-0015-0002_Solicitation_Amendment.pdf

LAKPP20180409

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to provide Questions and Answ ers for RFPQ011 - RFPQ012, and to revise the Solicitation to align it to the answ ers provided.

1. CONTRACT ID CODE PAGE OF PAGES

S 1 18

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 05-Mar-2019

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N6833519R0015

X 9B. DATED (SEE ITEM 11)

12-Feb-2019

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 2 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

05-Mar-2019

CODE

NAVAL AIR WARFARE CENTER AD (LKE)

CODE 2.5.2.3.2 B562-3, HWY 547

LAKEHURST NJ 08733-5082

N68335 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N6833519R0015

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

AMENDMENT 0002

Contracts Points of Contact:

LeAnn Spann E-mail: leann.spann@navy.mil

Charlie Gill E-mail: charles.gill1@navy.mil

The purpose of this amendment is to provide Questions and Answers for RFPQ011 - RFPQ012, and to revise the Solicitation to align it to the answers provided.

Question RFPQ011:

SUBJECT: Past Performance Volume 3

SPECIFIC QUESTION:

The solicitation states the offeror shall provide one electronic copy of the SOW/PWS for each contract reference as Annex B to this Past Performance Volume.

Based on the Disclosure of Information clauses and specific 8NA contracts prohibits release of contract or program information to anyone unless the JPO has provided prior written approval.

Please advise on how we should proceed if we don’t receive approval to release the data.

REFERENCE: N/A

PAGE NUMBER: 122 PARAGRAPH: 3

Answer to Question RFPQ011:

Please see the questions and answers provided as part of the Draft RFP. Similar to the question and answer provided for DRFPQ023, any documentation not received or received late will not be evaluated. Also, please see Section L, Part B Specific Instructions, 3. Volume 3 - Past Performance of the Solicitation. It states that the Offeror shall provide a narrative on each Past Performance Information form in the "Contract Effort Description" area that clearly describes how each contract reference has relevant work effort that matches the relevancy definitions specified in Section M of the solicitation. Additionally, the Offeror shall provide one electronic copy of the SOW/PWS for each contract reference as Annex B. Based on the above, if the SOW cannot be provided, the contract reference it relates to will not be evaluated.

Question RFPQ012:

SUBJECT: Address for Proposals

SPECIFIC QUESTION:

Can you please confirm that this is the correct address (see below) to send the proposal for solicitation N68335-19-R-0015. There doesn't appear to be a building number.

Naval Air Systems Command Code: AIR-2.5.2 LeAnn Spann

HWY 547, JB MDL, NJ 08733

Solicitation Number: N68335-19-R-0015

REFERENCE: N/A

PAGE NUMBER: N/A PARAGRAPH: N/A

Answer to Question RFPQ012:

The proposal submission address in Section L, Part A General Instructions, 4.0 Proposal Submission and Packaging, Paragraph 4.1.2 of the Solicitation has been revised to include the building and room number of the address.

SECTION L - INSTRUCTIONS, CONDITIONS AND NOTICES TO BIDDERS

The following have been modified:

INSTRUCTIONS TO OFFERORS

PART A GENERAL INSTRUCTIONS

1.0 GENERAL

Offerors are required to submit sufficient information concerning the technical evaluation factor to enable Government personnel to fully assess whether the Offeror meets all requirements. The proposal must be sufficient in detail and scope to enable evaluation and provide the evaluators a clear understanding of the Offeror’s capability to meet the requirements of the solicitation. Proposals must demonstrate that the Offeror is able and competent to meet all requirements. The Offeror shall not alter or rearrange the solicitation. The burden of proof for all substantiation within the proposal rests with the Offeror. Alternate proposals are not acceptable.

In presenting material in the proposal, the Offeror is advised that quality of information is more important than quantity. Clarity, brevity, and logical organization should be emphasized during proposal preparation. It is the responsibility of the Offeror to present enough information to allow the Government to evaluate its proposal without discussions. Unsubstantiated statements that the Offeror understands, can or will comply with the requirements, has the aircraft maintenance experience, or paraphrasing the requirements or parts thereof are considered inadequate and may render a rating of unacceptable.

The Offeror shall include any data necessary to illustrate the proposal meets the requirements of the solicitation.

There is no need to repeat information in more than one volume. The detailed information must be included in the most logical place, summarized, and referenced in other areas if an overlap exists. Do not provide elaborate brochures or other presentation material beyond that sufficient to present a complete and effective proposal.

Throughout these instructions, “Offeror” is defined as the Prime contractor with its CAGE code identified in Block 15A on Standard Form (SF) 33, Solicitation, Offer, and Award. A “Subcontract” is any contract entered into by a subcontractor to furnish supplies or services for performance of the prime contract. A “Principal Subcontractor” is the Prime Contractor’s first-tier subcontractor. A “Joint Venture” (JV) is a partnership or teaming arrangement between two or more companies that form a separate legal entity to propose as a Prime contractor for the purpose of responding to this solicitation. “JV Members” are the entities that make up a Joint Venture. For this solicitation, the term “entity” is used to mean any or all of the following: Prime contractor, JV, and JV members. The following entities are defined as “principal entities” (a) the Prime contractor (which includes the JV) and (b) JV Members.

Only principal entities will be used in the Technical evaluation.

There are 14 distinct Functional Areas within the EPaS Statement of Work (SOW) for which an Offeror may propose:

(1) Additive Manufacturing Equipment

(2) Ancillary Equipment

(3) Balancing Test Equipment

(4) Blasting/Sanding Equipment

(5) Coating Equipment

(6) Fall Protection Equipment

(7) Manufacturing and Fabrication Equipment

(8) Material Handling Equipment

(9) Measurement Equipment

(10) Heat Treat Equipment

(11) Nondestructive Inspection Equipment

(12) Test Equipment

(13) Welding Equipment

(14) Wet Processing Equipment

An Offeror may propose to one (1) or more Functional Areas. For each Functional Area to which an Offeror is interested in proposing, the Offeror is required to submit one (1) Technical Volume/binder and one (1) Past Performance Volume/binder per Functional Area addressing all the evaluation elements listed in this section.

2.0 PROPOSAL FORMAT AND SUBMISSION

Proposals must use Times New Roman, 12 pt. normal font (no reduction permitted), single-spaced, 1-inch margins all around, and must be formatted for/printed on standard 8.5 x 11-inch paper. If Government attachments have a different format/font, the Offeror may use the format/font in the attachment as provided. All pages should be numbered with section and page numbers. Proposals should be double sided. When foldout pages are used they shall not exceed 11 x 17 inches. Graphs and Tables shall be presented in no smaller than a 10 pt. font. Graphs should contain a grid, which allows values to be read directly from the graph. Graphic resolution should be consistent with the purpose of the data presented. Text utilized in charts, figures, and graphics should also be no smaller than a 10 pt. font and may use a font type selected by the Offeror. Each Volume shall be provided separately in a 3-ring binder. The binders shall be of an appropriate thickness to accommodate the number of pages and to allow ease of turning (e.g., a 30-page volume shall not be placed in a 2-inch binder). Within each binder of the Technical volume for the Functional Area the Offeror is proposing to, the Offeror shall separate with dividers each section of the Technical evaluation elements. For example, Functional Area 1 divider titles will be 1-V1.1 Technical Capability and 1-V1.2 Management, while Functional Area 2 binder will be 2-V1.1 Technical Capability and 2-V1.2 Management, etc. It is important to note that a separate binder for Volume 1- Technical shall be submitted for each Functional Area the Offeror is proposing to. Each binder shall be labeled with the name of the Functional Area (Example: Functional Area 1 Technical or Functional Area 1 Past Performance, etc.). Regardless if the Offeror is submitting a proposal for multiple Functional Areas, the Offeror shall only submit one Contract Administration Volume (Volume 2) to cover all Functional Areas the Offeror is proposing to. Offerors shall submit separate Past Performance binders (Volume 3) per Functional Area it is proposing to.

2.1 Electronic Submission of Proposal

This section is intended to provide information to the Offeror on the electronic format and application software to be used for submitting proposals. Use of the software and procedures described in this section will ensure that the proposals received are suitable for reading electronically. If a discrepancy exists between the original paper copy of the proposal and the original electronic copy on the CD-ROM disk, the original electronic copy shall take precedence.

2.1.1 Electronic Proposal Media

The Offeror shall submit all volumes of its proposal electronically on CD-ROM(s) compatible with the operating system and applications defined in Section 2.1.2 (Operating System and Applications). The Offeror shall put as much proposal material as possible on each CD-ROM.

For this solicitation, Annex A (Small Business) and Annex B (Past Performance Contract Reference Documentation) should be delivered on separate CD-ROMs from the remainder of the proposal.

Table G-3 (Proposal Structure) identifies the proposal structure for each volume. The Offeror shall submit two sets of CD-ROMs. The first set of CD-ROM disks shall be marked "Original” and the second set of CD-ROM disks shall be marked "Backup”. The sets of CD-ROM disks shall be clearly marked with the Offeror's name and address, the point of contact's name, email and phone number, the proposal volumes contained therein, and “Source Selection Information – See FAR 2.101 and 3.104”.

2.1.2 Operating System and Applications

The proposals will be accessed utilizing the Microsoft Windows 10 Operating System. Proposal information should be submitted using the following applications: Microsoft Word 2016, Microsoft Excel 2016, Microsoft PowerPoint 2016, and Microsoft Project 2016 and must be accessible to the Government; however, letters and other signed documents should be provided as a fully searchable Portable Document Format (.pdf) file. Use of other application software for submission of proposals is discouraged except where specific instructions for non-.pdf or Office 2016 applications are provided.

2.1.3 Hyperlinks

Offerors shall not use hyperlinks within and among proposal volumes.

2.1.4 Virus Free Electronic Submission

Offerors are responsible for ensuring that its electronic proposal is virus free. The Offeror shall certify, in its proposal cover letter, that all electronic proposal information delivered throughout the evaluation (e.g., original proposal submission, responses to evaluation notices, Final Proposal Revisions) has been or will be checked for viruses and certify that its files are/will be virus free.

The Offeror should specify the software, version, and virus definition used/that will be used to check the data.

2.1.5 Multimedia

The Offeror shall not embed sound or video (e.g., MPEG) files within proposal documents.

2.1.6 Graphics

Large files require greater computer system resources and are discouraged. The Offeror is encouraged to:

a. Simplify the color palette used in creating figures and minimize the use of color print or graphics to the maximum extent possible;

b. Minimize size of graphics files; and

c. Avoid scanned images.

2.1.7 File Naming Conventions

Valid extensions for files using their associated applications are listed below in Table G-1 (file Extensions):

Table G-1 File Extensions

Type of Application/Files Valid Extensions Portable Document Files .pdf Microsoft Word documents .docx Microsoft Excel documents .xlsx Microsoft Power Point .pptx

The Offeror shall follow the basic structure of the file naming convention in Table G-2 (Offeror Electronic File Naming Convention) for electronic file submissions (e.g., proposal volumes, attachments, appendices), where "#" represents the sequential numbering of files (if needed).

Offerors shall keep the file name as short as possible (i.e., under 40 characters) so that the files are accessible on Government share drives. Files with longer names may become corrupt or inaccessible.

The Offeror shall provide one (1) folder for each volume or annex, containing all electronic files requested within the volume or annex. Please submit each volume or annex as one file if possible.

Offerors should not provide each section/paragraph as separate files.

The Offeror shall ensure that the electronically submitted files are directly traceable to paper copy submittals.

Table G-2 Offeror Electronic File Naming Convention

Volume Number

Title File naming convention

Technical

Vol 1 Tech#.docx and Vol 1 Tech#.pdf

2 Contract Administration Vol 2 CA#.docx and Vol 2 CA#.pdf

3 Past Performance Vol 3 PP# [CAGE].docx

L-2 Past Performance Information Form Vol 3 PP-1 PPIF[CAGE].pdf

Annexes

Annex A Small Business (i.e. Small Business Subcontracting Plan and Small Business Utilization Plan)

AnnA SB SP.docx and AnnA SB SP. pdf AnnA SB UP.docx and AnnA SB UP.pdf

Annex B Past Performance Contract Reference Documentation AnnB PP CR.docx and AnnB PP CR.pdf

3.0 PROPOSAL CONTENT AND VOLUMES

3.1 The Offeror must present its proposal information in a manner that facilitates a one for one comparison between the information presented and Section L proposal instructions. Proposal information shall be structured such that its paragraph number/letter corresponds to the Proposal Instructions paragraph number/letter, although the Offeror may add lower tier sub paragraphs.

3.2 Each volume and annex of the proposal shall be submitted as original and additional hard and electronic copies as specified in Table G-3 (Proposal Structure). The Offeror shall submit all paper and electronic copies of the proposal to the address provided in Section 4.1.3 (Proposal Submission). Maximum page counts for each volume, are also specified in Table G-3 (Proposal Structure). The title and table of contents pages, as well as tables and attachments, are not included in the maximum page count.

Attachments are limited to those identified in this section in Table G-4 Section L List of Attachments. Any superfluous attachments not included in Table G-4 that are submitted with an Offeror’s proposal will not be evaluated.

Table G-3 Proposal Structure

Volume Number

Section

Volume/Annex Title Maximum

Page Count

Paper Copies

Required

Electronic Copies

Required

1 Technical 20 (per Functional Area)

Original/4 Copy

Original/1 Copy

1.1 Technical Capability

1.2 Management

1.3 Small Business Utilization Plan

2 Contract Administration 15 (per Proposal Submission)

Original/4 Copy

Original/1 Copy

3 Past Performance As Needed (per Functional Area)

Original/4 Copy

1 Original and 1 Backup

Annex A Small Business As Needed (per Functional Area)

1 Original 1 Original/1 Copy

Annex B Past Performance Contract Reference Documentation

As Needed (per Functional Area)

1 Original 1 Original/1 Copy

3.3 Each binder shall contain the following information using tabs and dividers:

a. Cover and title page;

b. Title of proposal and proposal number as applicable;

c. Offeror’s name, address and POC Information;

d. Solicitation number;

e. Proposal volume/annex number;

f. Table of Contents (The table of contents must provide sufficient detail to easily locate important elements).

3.4 Table G-4 lists the attachments provided to the Offeror within Section L.

Table G-4 Section L List of Attachments

Section L Attachment Number Electronic File Title Attachment Name L-1 Att L-1 QA Form.docx Solicitation Question/Response Form L-2 Att L-2 Vol 3 PP-1 PPIF[CAGE].pdf Past Performance Information Form L-3 Att L-3 Vol 3 PP-2

CPAQ[CAGE].pdf Contractor Performance Assessment Questionnaire

L-4 Att L-4 Vol 1 Self_Cert[CAGE].pdf Self-Certification

4.0 PROPOSAL SUBMISSION AND PACKAGING

All Proposals shall be UNCLASSIFIED.

4.1 Proposal Submission

4.1.1 Clearly mark all packages with the solicitation number. The submission date for all Volumes of the proposal shall be no later than the date and time specified in Block 9 of Standard Form 33 (Solicitation, Offer and Award) of the solicitation. Offerors will submit paper and electronic copies of the entire proposal in accordance with Table G-3 by 1400 Eastern Standard Time (EST) on the due date shown in Block 9 of the SF33.

4.1.2 Proposals delivered by hand shall be coordinated with Ms. LeAnn Spann, Contract Specialist, leann.spann@navy.mil. Proposals shall be submitted using the address provided below. Initial Proposals shall not be submitted by facsimile or electronically via email.

Naval Air Systems Command Code: AIR-2.5.2 LeAnn Spann Building 120, Room 180

HWY 547, JB MDL, NJ 08733

Solicitation Number: N68335-19-R-0015

4.1.3 If a proposal or amendment is hand carried, the Offeror must complete a visit request no later than two (2) business days prior to delivery of the proposal to the Contract Specialist. Without the visit request, the Offeror may not get beyond the security gate to deliver its proposal. A visit request may be obtained by contacting with Ms., LeAnn Spann, Contract Specialist, leann.spann@navy.mil. Upon arrival to NAVAIR Lakehurst, please contact Ms. Spann. In the event that Ms. Spann is not available, please contact the alternate POC, the Contracting Officer, Mr. Charlie Gill, Charles.gill1@navy.mil. Guards or security officers are not authorized to accept proposals.

4.2 PROPOSAL PACKAGING

UNCLASSIFIED PACKAGING

The Offeror shall package the proposal volumes in cartons or equivalent packaging containers in the most efficient manner possible, grouping like volumes to the maximum extent possible. Clearly mark all packages with the solicitation number.

The outside and inside of the carton(s), the front cover of the proposal volumes, and the CD-ROMs should be clearly stamped or marked ― “For Official Use Only”; and “Source Selection Information – See FAR-

2.101 and 3.104.”

The sets of CD-ROM disks should be clearly marked with the Offeror's name and address, the point of contact's name and phone number, the proposal volumes contained therein.

Each carton should identify its contents by including a packing slip detailing each volume/annex number and title, and copy number. Each carton should be double wrapped. The outside of the carton should be plain and should contain only pertinent shipping /mailing information including the intended recipient identified in 4.1 (Proposal Submission).

5.0 SOLICITATION QUESTIONS

Solicitation questions shall be emailed to the Contract Specialist with a copy to the Contracting Officer identified in Section 4.1 using Attachment L-1, Solicitation Question & Answer Form, and must be received no later than 1400 EST on the 10th day after the RFP release date. The Government intends to answer all questions submitted prior to this deadline, 14 days after the RFP release date. Questions and answers will be provided via a formal RFP amendment. Thus, Offerors are cautioned not to include proprietary information in the questions because the Government may release it to all Offerors. The Government reserves the right not to respond to any questions received concerning this solicitation after the deadline and it is not the Government’s intention to extend the proposal due date due to questions and answers received after the deadline. Accordingly, Offerors are encouraged to carefully review all solicitation requirements and submit questions to the Government early in the proposal preparation cycle.

6.0 CHANGES TO SOLICITATION

For any changes and additional information to the solicitation please go to website: https://www.fbo.gov/

Search the database for the solicitation number N68335-19-R-0015

PART B SPECIFIC INSTRUCTIONS

1. VOLUME 1 – TECHNICAL

Note: This volume shall not contain any reference to price aspects of the offer. For each of the Functional Areas the Offeror is proposing to, the Offeror shall follow the format in Section 2.0 Proposal and Format Submission. A separate binder (Volume 1- TECHNICAL) shall be submitted for each Functional Area the Offeror is proposing to.

1.1 Technical Capability

The Offeror shall review the required information in Table T-1 (Technical Capability) for each Functional Area it wishes to be considered for an award.

The Offeror shall demonstrate its technical competency in at least one (1) of the Functional Areas below to be considered for an award. The Offeror shall describe its approach to meet the requirements, including the verification requirements as identified in each Functional Area definition of the SOW.

NOTE: In order to be considered for award in the specific Functional Area, the Offeror shall meet all of the requirements listed under the column titled “Required Information to be Submitted in Proposal”. The Offeror shall address all Functional Areas in which it wants to be considered for an award. However, the Government encourages Offerors to focus on its core technical competency.

Table T-1

Functional Area and Definition Required Information to be Submitted in Proposal

Functional Area 1 – Additive Manufacturing Equipment

This functional area includes but is not limited to equipment required for joining or adding materials through extruding or jetting. Examples include, but are not limited to, 3D printers, cold spray, flame/metal spray, and hybrid manufacturing systems.

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The capabilities statement shall include a detailed description of a sample product that would fall within the scope of this functional area definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

To demonstrate successful implementation and operation of quality control operating procedures, the Offeror shall provide a description and/or example of its quality control operating procedures.

The Offeror shall provide a valid certificate for at least one of the following standards: NADCAP, ISO, ASTM or SAE certificate or provide a self-certification documentation in accordance with Attachment L-4 to Section L of this solicitation.

Functional Area 2 – Ancillary Equipment

This functional area includes support equipment necessary to provide full functionality of the process and equipment to provide gas, air, solid particulates, fluid handling and treatment.

This includes functions of general millwright and other support necessary to install the equipment. This includes all material, labor, and transportations to provide, install a complete usable system including utilities, training for operation, warranty repair. Examples include, but are not limited to, deionized water conditioning system, pumps, compressors, Reverse Osmosis filters, filters, air scrubbers, cooling towers, air dryers, vacuum

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The capabilities statement shall include a detailed description of a sample product that would fall within the scope of this functional area definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

pumps, breathing air, industrial controls, control software, remote networking systems.

To demonstrate successful implementation and operation of quality control operating procedures, the Offeror shall provide a description and/or example of its quality control operating procedures.

The Offeror shall provide a valid certificate for at least one of the following standards: NADCAP, ISO, ASTM or SAE certificate or provide a self-certification documentation in

Functional Area 3 – Balancing Test Equipment

This functional area includes machines used to support aircraft engine maintenance, repair and overhaul operations. Examples include but are not limited to balancing test stands, rotary tables, engine and rotary build up stands, balancing machines, and balancing software.

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The capabilities statement shall include a detailed description of a sample product that would fall within the scope of this functional area definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

To demonstrate successful implementation and operation of quality control operating procedures, the Offeror shall provide a description and/or example of its quality control operating procedures.

The Offeror shall provide a valid certificate for at least one of the following standards: NADCAP, ISO, ASTM or SAE certificate or provide a self-certification documentation in

Functional Area 4 – Blasting and Sanding Equipment

This functional area includes equipment to remove coatings prior to wet processing, plating, coating, and painting.

Additionally, this functional area includes equipment for working hardening surfaces (i.e. peening).

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The capabilities statement shall include a detailed description of a sample product that would fall within the scope of this functional area definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

To demonstrate successful implementation and operation of quality control operating procedures, the Offeror shall provide a description and/or example of its quality control operating procedures.

The Offeror shall provide a valid certificate for at least one of the following standards: NADCAP, ISO, ASTM or SAE certificate or provide a self-certification documentation in

Functional Area 5 – Coating Equipment

This functional area includes all equipment required to provide coating/final finish for painting, powder coating, and ion plating for corrosion resistance, ease of cleaning procedures, increased surface hardness, etc. Types of equipment includes but are not limited to zinc, nickel, and chrome plating tanks, paint booths, and shot peening/sand blast booths. Equipment shall conform to military plating specifications including Chrome QQ-C-320, Nickel QQ-N-290, Cadmium QQ-P-416, as well as military painting specifications TT-P-28 and TT-P-645.

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The capabilities statement shall include a detailed description of a sample product that would fall within the scope of this functional area definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

To demonstrate successful implementation and operation of quality control operating procedures, the Offeror shall provide a description and/or example of its quality control operating procedures.

The Offeror shall provide a valid certificate for at least one of the following standards: NADCAP, ISO, ASTM or SAE certificate or provide a self-certification documentation in

Functional Area 6 – Fall Protection Equipment

This functional area includes equipment used to ensure employee safety while working at heights while performing general maintenance, aircraft or component maintenance and/or manufacturing. Types of equipment include but are not limited to work stands, davits, lifeline systems, as well as required accessories such as harnesses, Self-Retracting Lifelines, and all other equipment required to use the fall protection device or system.

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The capabilities statement shall include a detailed description of a sample product that would fall within the scope of this functional area definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

To demonstrate successful implementation and operation of quality control operating procedures, the Offeror shall provide a description and/or example of its quality control operating procedures.

The Offeror shall provide a valid certificate for at least one of the following standards: ISO 9001, AS9100, ASA9110 or ANSI, certificate or provide self-certification documentation in

Functional Area 7 – Manufacturing and Fabrication Equipment

This functional area consists of but is not limited to turnkey manufacturing and fabrication equipment and solutions.

Manufacturing and fabrication includes all equipment required to convert raw material into a finished product, as well as the manipulation of raw material. This category includes equipment that falls under subtractive manufacturing (i.e. lathe, mill, grinder) and metal forming (i.e. bender, brake, press).

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The capabilities statement shall include a detailed description of a sample product that would fall within the scope of this functional area definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

To demonstrate successful implementation and operation of quality control operating procedures, the Offeror shall provide a description and/or example of its quality control operating procedures.

The Offeror shall provide a valid certificate for at least one of the following standards: NADCAP, ISO, ASTM or SAE certificate or provide a self-certification documentation in

Functional Area 8 – Material Handling Equipment

This functional area includes but is not limited to equipment used for the movement, protection, storage and control of finished product, components, parts and materials throughout the manufacturing process. This category could include both manual and automated equipment such as overhead cranes, automated storage and retrieval systems, conveyors, dispensers and other similar types of equipment.

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The capabilities statement shall include a detailed description of a sample product that would fall within the scope of this functional area definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

To demonstrate successful implementation and operation of quality control operating procedures, the Offeror shall provide a description and/or example of its quality control operating procedures.

The Offeror shall provide a valid certificate for at least one of the following standards: ASTM, AWS certificate or provide self-certification documentation in accordance with Attachment L-4 to Section L of this solicitation.

Functional Area 9 – Measurement Equipment

This functional area of equipment shall involve all support equipment necessary to provide capture of physical quantities, properties or dimensions of various parts, components or assemblies. Examples include but are not limited to laser trackers, surface scanners, portable arm measurement systems, Coordinate Measuring Systems, contact probe measurement devices, hardness testers, surface testers, optical comparators systems, and etc. This also includes any hardware and software used for data acquisition, storage, processing and display.

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The capabilities statement shall include a detailed description of a sample product that would fall within the scope of this functional area definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

To demonstrate successful implementation and operation of quality control operating procedures, the Offeror shall provide a description and/or example of its quality control operating procedures.

The Offeror shall provide a valid certificate for at least one of the following standards: NADCAP, ISO, ASTM or SAE certificate or provide a self-certification documentation in

Functional Area 10 – Heat Treat Equipment

This functional area of equipment is used for the strengthening and stress relief of material. Examples include but are not limited to furnaces, ovens, salt baths, vacuum furnaces, refrigeration equipment, and equipment used primarily for

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The Offeror shall discuss how they meet the AMS2750. The capabilities statement shall thermal treatment of semi-finished and finished metal parts.

Equipment shall conform to Aerospace Material Specification (AMS) 2750, which covers temperature sensors, instrumentation, thermal processing equipment, system accuracy tests, and temperature uniformity tests.

include a detailed description of a sample product that would fall within the scope of this functional areas definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

To demonstrate successful implementation and operation of quality control operating procedures, the Offeror shall provide a description and/or example of its quality control operating procedures.

The Offeror shall provide a valid certificate for at least one of the following standards: NADCAP, ISO, ASTM or SAE certificate or provide self-certification documentation in accordance with Attachment L-4 to Section L of this solicitation.

The Offeror shall provide one of the following certificates ISO9001:2008 or AS9100 (Quality Management Systems) for heat treating and related services for ferrous, non-ferrous, and special application alloys for aviation, space, and defense applications.

Functional Area 11 – Non-Destructive Inspection (NDI) Equipment

This functional area of equipment includes all equipment used to analyze and evaluate the properties of a material, component, or system without causing damage. Examples include but are not limited to liquid penetrant, Magnetic Particle Inspection, eddy current, ultrasonic, radiographic, X-ray, Florescent Penetrant Inspection, c-scan, and a-scan. The capability of nondestructive inspection processes used for production process monitoring and quality control of components should be established, as required by MIL-STD-1530, to mitigate risk of missing defects. The equipment will be able to demonstrate the applicability of the proposed inspection process and verify the inspection process through a demonstration.

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The capabilities statement shall include a detailed description of a sample product that would fall within the scope of this functional area definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

The Offeror shall meet ASTM Requirements by providing any of the following certificates ASTM E1417, E1444, E1255, E1742, or E2582.

Functional Area 12 – Test Equipment

This functional area of equipment includes machines used to support aircraft maintenance, repair and overhaul operations.

This class of equipment shall involve all support equipment necessary for type model series, components, assemblies and subassemblies in accordance with manufacture specified testing procedures and methods. Examples include but are not limited to static and dynamic balancing devices, component test stands, automatic test equipment, engine test stands, and test cells. This also includes any hardware and software used for data acquisition, storage, input, processing, output, and display.

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The capabilities statement shall include a detailed description of a sample product that would fall within the scope of this functional area definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

To demonstrate successful implementation and operation of quality control operating procedures, the Offeror shall provide a description and/or example of its quality control operating procedures.

The Offeror shall provide a valid certificate for at least one of the following standards: NADCAP, ISO, ASTM or SAE certificate or provide a self-certification documentation in

Functional Area 13 – Welding Equipment

This functional area of equipment includes equipment used to join metal parts by melting them (i.e. fusion) with or without further molten material.

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The capabilities statement shall include a detailed description of a sample product that would fall within the scope of this functional area definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

To demonstrate successful implementation and operation of quality control operating procedures the contractor shall provide a description and/or example of their quality control operating procedures.

The Offeror shall provide a valid certificate for at least one of the following standards: NADCAP, ISO, ASTM or SAE certificate or provide a self-certification documentation in

Functional Area 14 – Wet Processing Equipment

This functional area of equipment provides final finish for plating various metals. It includes all equipment required to coat/finish material in order to provide priming, conversion, finish surface, corrosion resistance, cleaning procedures, and increased surface hardness.

The Offeror shall provide a capabilities statement demonstrating that they are capable of performing the type of work in this functional area. The capabilities statement shall include a detailed description of a sample product that would fall within the scope of this functional area definition. The Offeror shall provide details on one or more products (no more than 5 examples from the past three years) that fall within the scope of this functional area to demonstrate that the Offeror has successfully executed and delivered those products to its customer.

To demonstrate successful implementation and operation of quality control operating procedures, the Offeror shall provide a description and/or example of its quality control operating procedures.

The Offeror shall provide a valid certificate for at least one of the following standards: ISO 9001, AS9100, ASA9110, or NIST traceable certificate or provide self-certification documentation in accordance with Attachment L-4 to Section L of this solicitation.

1.2 Management

The Offeror shall provide a description of its organizational structure and management approach that clearly identifies the roles and responsibilities of personnel and subcontractors, lines of authority, span of control, and communication strategies.

The Offeror shall provide a narrative discussing its approach for managing, overseeing, and executing cost, schedule, and performance on future TOs/DOs at the COMFRC sites located at FRC Southeast located at Naval Air Station Jacksonville, FL, FRC East located at Marine Corps Air Station located at Cherry Point, NC, FRC Southwest located at Naval Air Station located at North Island, CA, and Aviation Support Equipment located at Solomons Island, MD.

1.3 Small Business (SB) Utilization Plan

The Offeror (Large and Small Businesses) shall provide a SB Utilization Plan, at this acquisition phase, which addresses a strategy for utilizing SB Concerns during TO/DO performance in Annex A (Small Business).

For purposes of this solicitation, the term SB Concern includes the subcategories of Veteran-Owned Small Business (VOSB), Service-Disabled Veteran-Owned Small Business (SDVOSB), HUBZone Small Business (HUBZone), Small Disadvantaged Business (SDB), and Women-Owned Small Business

(WOSB).

The SB Utilization Plan is separate from the SB Subcontracting Plan. Large Business Offerors shall provide the SB Subcontracting Plan at time of TO/DO when the cumulative dollar total of all awarded TO/DOs exceed the threshold identified in FAR 19.7. The SB Subcontracting Plan shall identify goals as defined in Section H.3 (e) and should conform to the requirements of FAR 19.7 and DFARS 219.7. Large Business Offerors shall provide written confirmation in the submission of their SB Utilization Plan stating “The goals defined in Section H.3 (e) will be submitted for each unrestricted fair opportunity that requires such submission”.

The SB Utilization Plan should address actions you will take in preparing to propose for TOs/DOs under this MAC and shall include the following elements:

a. Approach to identifying SB Concerns;

b. Process for determining the extent of participation of SB Concerns. The Offeror may include:

sponsoring program specific outreach events and industry conferences, establishing Mentor-Protégé relationships and market research using websites such as the NAVAIR Office of Small Business Programs website (http://www.navair.navy.mil/osbp) and the Small Business Administration’s Dynamic Small Business Search tool (http://dsbs.sba.gov/dsbs/search/dsp_dsbs.cfm) to locate small business concerns; and

c. Any process improvements based on lessons learned that have been implemented to correct past inabilities to meet proposed goals.

2. VOLUME 2—CONTRACT ADMINISTRATION

Offerors shall only submit one Contract Administration Volume.

The Offeror shall provide the following contract administration information.

2.1 Offeror Representatives and Information: The Offeror shall provide a summary sheet comprised of the information listed below for the Prime (includes JV):

a. Prime (includes JV)

i. Business Name;

ii. Address;

iii. Primary point of contact for this solicitation (Name, title, phone number, email);

iv. Secondary point of contact for this solicitation (Name, title, phone number, email);

v. Individuals authorized to negotiate with the Government and contractually bind the Offeror (Name, title, phone number, email);

vi. DUNS; and

vii. CAGE code.

2.2 Government Agency Information: Provide the mailing address, telephone, email address and facility codes for the Offeror’s local Defense Contract Management Agency (DCMA), Defense Contract Audit Agency (DCAA), and Government Paying Office. In addition, provide the name, telephone number, and email address for the Administrative Contracting Officer at DCMA.

2.3 The Offeror shall indicate the most recent date which the Offeror’s cognizant DCMA/DCAA determined the adequacy of the Offeror’s Accounting System. If the Offeror’s Accounting System status is not adequate, list the date of the last adequacy determination and the current status of any reviews or ongoing audits. If the Offeror’s Accounting System is not adequate, at the TO/DO level, the Contracting Officer will request a pre-award survey.

2.4 Terms and Conditions:

An exception is where an Offeror states it will not comply with a solicitation requirement, usually involving contract terms and conditions.

Non-compliance with the terms, conditions, or requirements set forth in the solicitation may result in an Offeror being considered unawardable. The Government will consider an Offeror ineligible for award who proposes any exception or deviation to any term or condition of the solicitation that is not expressly authorized by the solicitation.

The Offeror shall provide the following statement in this section: “No exceptions or deviations are taken to the terms and conditions or any requirement of the solicitation.”

2.5 Model Contract Documents: The Offeror shall provide the model contract documents as a separate electronic file and as a separate section in this volume. In the event there is any discrepancy between these contract documents and any other volume, Volume 2 (Contract Administration) shall take precedence. The Offeror shall provide the following documents within this section:

a. Original signed SF33 (Solicitation, Offer, and Award) cover page of the solicitation and a signed SF30 cover page of each amendment (as applicable) with all applicable Blocks completed and acknowledgement of receipt of each amendment (as applicable) to this…