N6339421R0017 VLS LCU Solicitation.pdf

CODE

(Hour)

PAGE(S)

until 04:00 PM local time 20 Sep 2021

X

A X B X C X D

EX

X

G F 124 - 131

132 - 144 X H 145 - 151

RATING PAGE OF PAGES

7. ISSUED BY

(Date)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)

Prescribed by GSA FAR (48 CFR) 53.214(c)

DX-A3 1 151

(If other than Item 7)

15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO

AND

ADDRESS

SIGN OFFER (Type or print)

OF

OFFEROR

AMENDMENT NO. DATE

15B. TELEPHONE NO (Include area code) 17. SIGNATURE15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

18. OFFER DATE

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

2. CONTRACT NO.

N63394 8. ADDRESS OFFER TO

See Item 7

9. Sealed offers in original and 0 copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and

N/A conditions contained in this solicitation.

10. FOR INFORMATION

CALL:

A. NAME (NO COLLECT CALLS)

11. TABLE OF CONTENTS

SOLICITATION/ CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/ COSTS

2 - 59

X I CONTRACT CLAUSES

DESCRIPTION/ SPECS./ WORK STATEMENT X

PACKAGING AND MARKING

60 - 81 82 - 84

J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

85 - 89 90 - 100

X K

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

CONTRACT ADMINISTRATION DATA 101 - 109 X

SPECIAL CONTRACT REQUIREMENTS

OFFER (Must be fully completed by offeror) 110 - 111 X M

L INSTRS., CONDS., AND NOTICES TO OFFERORS

EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments

AMENDMENT NO. DATE

to the SOLICITATION for offerors and related documents numbered and dated):

FACILITY

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period

SOLICITATION, OFFER AND AWARD

X

(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE

EMAIL:TEL: (Signature of Contracting Officer)

CODE CODE

B. TELEPHONE (Include area code) C. E-MAIL ADDRESS

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

PART IV - REPRESENTATIONS AND INSTRUCTIONS

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

112 - 122

PART II - CONTRACT CLAUSES

NAVAL SURFACE WARFARE CENTER

4363 MISSILE WAY

PORT HUENEME CA 93043-4307

(805) 228-8287

805-228-6299FAX:

TEL:

FAX:

TEL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

6. REQUISITION/PURCHASE NO.5. DATE ISSUED

18 Aug 2021

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

[ X ]

3. SOLICITATION NO.

N6339421R0017

Section B - Supplies or Services and Prices

NOTE A

Stepladder Pricing. Stepladder pricing is utilized in this solicitation to provide Offerors an opportunity to propose different pricing for separate quantity ranges within applicable Contract Line Items (CLINs). Price evaluation of step ladder CLINs will utilize a randomly selected quantity. Notwithstanding the option to propose different unit pricing for different quantities, the Offeror may propose the same unit price for all quantities.

For all option CLINs with stepladder pricing, the Government may unilaterally exercise a given line item more than once. Option CLINs with stepladder pricing may be exercised until the total quantity purchased equals the maximum quantity listed for that option CLIN in Section B.

(End of Text)

NOTE B

The following table provides the approximate timeframes that the CLINs and associated SLINs, where applicable, will be awarded or exercised. This information is provided for planning purposes only and is subject to change depending on need and funding availability.

Deliverable CLINs and Award/Option Exercise Timeframe

Award/Base Year*

Option Year 1 Option Year 2 Option Year 3 Option Year 4

VLS MK 235 LCU MOD 17 & 18 CLIN 1000 CLIN 1100 CLIN 1200 CLIN 1300 CLIN 1400

VLS MK 235 LCU MAM Components CLIN 2000 CLIN 2100 CLIN 2200 CLIN 2300 CLIN 2400

VLS MK 235 LCU OBRP Components CLIN 3000 CLIN 3100 CLIN 3200 CLIN 3300 CLIN 3400

VLS MK 235 LCU INCO Spares CLIN 4000 CLIN 4100 CLIN 4200 CLIN 4300 CLIN 4400

VLS MK 235 Depot Spares CLIN 5000 CLIN 5100 CLIN 5200 CLIN 5300 CLIN 5400

Production Readiness Review (PRR) CLIN 6000 CLIN 6100 CLIN 6200 CLIN 6300 CLIN 6400

Physical Configuration Audit (PCA) CLIN 7000 N/A N/A N/A N/A

Data Deliverables - CDRLs CLIN 8000

*CLINS 1000, 2000, 3000, 4000, 5000, and 6000 will be funded at award.

NOTE C

MAXIMUM QUANTITY MULTIPLE OPTION QUANTITY CLINS

CLINs, SLINs or other provisions in this contract set forth option quantities associated with option exercise periods.

Offerors should use those estimated quantities for planning purposes and in the preparation of its proposals including its price proposal. After award of the contract the Government may need to move quantity between these option CLINs. The contract resulting from this solicitation will have a maximum dollar value or a maximum number of units that may be purchased. The Government, may, through contract modification, move quantities of items labor or estimated costs between the option CLINs as long as the contract maximum is not exceeded.

If pricing varies by option exercise period the pricing applicable is the pricing applicable when the option is exercised. For example, items moved from option year four to option year one will be payable at the rates applicable to option year one.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

MK 235 LCU Base Year (BY)

FFP

Procure, fabricate, assemble and conduct First Article Inspection (FAI) and Physical Configuration Audit (PCA) in accordance with (IAW) Statement of Work (SOW) sections 4.2 and 6.0 respectively. Refer to CDRLs for item and data requirements.

NET AMT

1000AA 34 Each

MK 235 MOD 17 LCU BY

FFP

Procure, fabricate, assemble and conduct FAI and PCA IAW SOW 4.2 and 6.0 respectively, Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

DWG NR: 7104280-179

PSC CD: 5999

1000AB 12 Each

MK 235 MOD 18 LCU BY

FFP

Procure, fabricate, assemble and conduct FAI and PCA IAW SOW 4.2 and 6.0 respectively, Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

DWG NR: 7104280-189

MK 235 LCU Option Year 1 (OY1)

FFP

Production Phase: Fabricate, assemble and deliver LCUs and associated equipment IAW the SOW and Technical Data Package (TDP). Refer to CDRLs for item and data requirements.

1100AA Each

OPTION MK 235 MOD 17 LCU OY1

FFP

Production Phase: Fabricate, assemble and deliver LCUs and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

STEPLADDER PRICING

STEPLADDER NAME ITEM NO FROM QUANTITY TO QUANTITY UNIT PRICE

MK 235 MOD 17 LCU OY1 1100AA 6.00 10.00

11.00 14.00

15.00 16.00

1100AB Each

OPTION MK 235 MOD 18 LCU OY1

FFP

Production Phase: Fabricate, assemble and deliver LCUs and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MK 235 MOD 18 LCU OY1 1100AB 6.00 10.00

15.00 18.00

MK 235 LCU Option Year 2 (OY2)

FFP

Production Phase: Fabricate, assemble and deliver LCUs and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

1200AA Each

OPTION MK 235 MOD 17 LCU OY2

FFP

Production Phase: Fabricate, assemble and deliver LCUs and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MK 235 MOD 17 LCU OY2 1200AA 6.00 10.00

1200AB Each

OPTION MK 235 MOD 18 LCU OY2

FFP

Production Phase: Fabricate, assemble and deliver LCUs and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MK 235 MOD 18 LCU OY2 1200AB 6.00 10.00

MK 235 LCU Option Year 3 (OY3)

FFP

1300AA Each

OPTION MK 235 MOD 17 LCU OY3

FFP

Production Phase: Fabricate, assemble and deliver LCUs and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MK 235 MOD 17 LCU OY3 1300AA 6.00 10.00

1300AB Each

OPTION MK 235 MOD 18 LCU OY3

FFP

Production Phase: Fabricate, assemble and deliver LCUs and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

FOB: Destination

MK 235 MOD 18 LCU OY3 1300AB 6.00 10.00

MK 235 LCU Option Year 4 (OY4)

FFP

1400AA Each

OPTION MK 235 MOD 17 LCU OY4

FFP

Production Phase: Fabricate, assemble and deliver LCUs and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MK 235 MOD 17 LCU OY4 1400AA 6.00 10.00

11.00 15.00

16.00 20.00

1400AB Each

OPTION MK 235 MOD 18 LCU OY4

FFP

Production Phase: Fabricate, assemble and deliver LCUs and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MK 235 MOD 18 LCU OY4 1400AB 6.00 10.00

MK 235 LCU MAM Components BY

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data

2000AA 12 Set MK 235 MOD 11/12 LCU MAM Components BY

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

2000AB 8 Set MK 235 MOD 15 LCU MAM Components BY

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

2000AC 17 Set MK 235 MOD 17 LCU MAM Components BY

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

2000AD 6 Set MK 235 MOD 18 LCU MAM Components BY

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 LCU MAM Components OY1

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated

2100AA Set OPTION MK 235 MOD 17 LCU MAM Components OY1

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU MAM

Components OY1

2100AA 3.00 5.00

6.00 8.00

2100AB Set OPTION MK 235 MOD 18 LCU MAM Components OY1

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 LCU MAM

Components OY1

2100AB 3.00 5.00

6.00 9.00

MK 235 LCU MAM Components OY2

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated

2200AA Set OPTION MK 235 MOD 17 LCU MAM Components OY2

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU MAM

Components OY2

2200AA 3.00 5.00

2200AB Set OPTION MK 235 MOD 18 LCU MAM Components OY2

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 LCU MAM

Components OY2

2200AB 3.00 5.00

MK 235 LCU MAM Components OY3

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated

2300AA Set OPTION MK 235 MOD 17 LCU MAM Components OY3

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU MAM

Components OY3

2300AA 3.00 5.00

2300AB Set OPTION MK 235 MOD 18 LCU MAM Components OY3

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 LCU MAM

Components OY3

2300AB 3.00 5.00

MK 235 LCU MAM Components OY4

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated

2400AA Set OPTION MK 235 MOD 17 LCU MAM Components OY4

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU MAM

Components OY4

2400AA 3.00 5.00

6.00 10.00

2400AB Set OPTION MK 235 MOD 18 LCU MAM Components OY4

FFP

Maintenance Assistance Module (MAM) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 LCU MAM

Components OY4

2400AB 3.00 5.00

MK 235 LCU OBRP Components BY

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated

3000AA 12 Set MK 235 MOD 11/12 LCU OBRP Components BY

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

3000AB 8 Set MK 235 MOD 15 LCU OBRP Components BY

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

3000AC 17 Set MK 235 MOD 17 LCU OBRP Components BY

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

3000AD 6 Set MK 235 MOD 18 LCU OBRP Components BY

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 LCU OBRP Components OY1

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated

3100AA Set OPTION MK 235 MOD 17 LCU OBRP Components OY1

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU OBRP

OY1

3100AA 3.00 5.00

3100AB Set OPTION MK 235 MOD 18 LCU OBRP Components OY1

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 LCU OBRP

OY1

3100AB 3.00 5.00

MK 235 LCU OBRP Components OY2

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated

3200AA Set OPTION MK 235 MOD 17 LCU OBRP Components OY2

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU OBRP

OY2

3200AA 3.00 5.00

3200AB Set OPTION MK 235 MOD 18 LCU OBRP Components OY2

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 LCU OBRP

OY2

3200AB 3.00 5.00

MK 235 LCU OBRP Components OY3

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated

3300AA Set OPTION MK 235 MOD 17 LCU OBRP Components OY3

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU OBRP

OY3

3300AA 3.00 5.00

3300AB Set OPTION MK 235 MOD 18 LCU OBRP Components OY3

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 LCU OBRP

OY3

3300AB 3.00 5.00

MK 235 LCU OBRP Components OY4

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated

3400AA Set OPTION MK 235 MOD 17 LCU OBRP Components OY4

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU OBRP

OY4

3400AA 3.00 5.00

3400AB Set OPTION MK 235 MOD 18 LCU OBRP Components OY4

FFP

Onboard Repair Part (OBRP) Production Phase: Fabricate, assemble and deliver LCU MAM and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 LCU OBRP

OY4

3400AB 3.00 5.00

MK 235 INCO Spares BY

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data

4000AA 1 Set MK 235 MOD 11/12 LCU INCO Spares BY

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

4000AB 3 Set MK 235 MOD 15 LCU INCO Spares BY

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

4000AC 2 Set MK 235 MOD 17 LCU INCO Spares BY

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

4000AD 2 Set MK 235 MOD 18 LCU INCO Spares BY

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 INCO Spares OY1

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and

4100AA Set OPTION MK 235 MOD 17 LCU INCO Spares OY1

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU INCO

Spares OY1

4100AA 1.00 2.00

3.00 4.00

4100AB Set OPTION MK 235 MOD 18 LCU INCO Spares OY1

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 INCO

Spares OY1

4100AB 1.00 2.00

MK 235 INCO Spares OY2

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and

4200AA Set OPTION MK 235 MOD 17 LCU INCO Spares OY2

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU INCO

Spares OY2

4200AA 1.00 2.00

4200AB Set OPTION MK 235 MOD 18 LCU INCO Spares OY2

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 INCO

Spares OY2

4200AB 1.00 2.00

MK 235 INCO Spares OY3

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and

4300AA Set OPTION MK 235 MOD 17 LCU INCO Spares OY3

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU INCO

Spares OY3

4300AA 1.00 2.00

4300AB Set OPTION MK 235 MOD 18 LCU INCO Spares OY3

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 INCO

Spares OY3

4300AB 1.00 2.00

MK 235 INCO Spares OY4

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and

4400AA Set OPTION MK 235 MOD 17 LCU INCO Spares OY4

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU INCO

Spares OY4

4400AA 1.00 2.00

4400AB Set OPTION MK 235 MOD 18 LCU INCO Spares OY4

FFP

Installation and Checkout (INCO) spares kit.

Production Phase: Fabricate, assemble and deliver LCU INCO spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 INCO

Spares OY4

4400AB 1.00 2.00

MK 235 LCU Depot Spares BY

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and

5000AA 1 Set MK 235 Mod 11/12 LCU Depot Spares BY

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

5000AB 3 Set MK 235 Mod 15 LCU Depot Spares BY

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

5000AC 1 Set MK 235 Mod 17 LCU Depot Spares BY

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

5000AD 2 Set MK 235 Mod 18 LCU Depot Spares BY

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 LCU Depot Spares OY1

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and

5100AA Set OPTION MK 235 Mod 17 LCU Depot Spares OY1

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU Depot Spares OY1

5100AA 1.00 2.00

5100AB Set OPTION MK 235 Mod 18 LCU Depot Spares OY1

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 LCU Depot Spares OY1

5100AB 1.00 2.00

MK 235 LCU Depot Spares OY2

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and

5200AA Set OPTION MK 235 Mod 17 LCU Depot Spares OY2

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU Depot Spares OY2

5200AA 1.00 2.00

5200AB Set OPTION MK 235 Mod 18 LCU Depot Spares OY2

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 LCU Depot Spares OY2

5200AB 1.00 2.00

MK 235 LCU Depot Spares OY3

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and

5300AA Set OPTION MK 235 Mod 17 LCU Depot Spares OY3

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU Depot Spares OY3

5300AA 1.00 2.00

5300AB Set OPTION MK 235 Mod 18 LCU Depot Spares OY3

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 LCU Depot Spares OY3

5300AB 1.00 2.00

MK 235 LCU Depot Spares OY4

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and

5400AA Set OPTION MK 235 Mod 17 LCU Depot Spares OY4

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 17 LCU Depot Spares OY4

5400AA 1.00 2.00

5400AB Set OPTION MK 235 Mod 18 LCU Depot Spares OY4

FFP

Depot spares kit.

Production Phase: Fabricate, assemble and deliver LCU Depot spares kit and associated equipment IAW the SOW and TDP. Refer to CDRLs for item and data requirements.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

MK 235 MOD 18 LCU Depot Spares OY4

5400AB 1.00 2.00

6000 4 Quarter

(Time)

Production Readiness Review BY

FFP

Production Readiness Review (PRR) Production Phase: PRR IAW SOW Paragraph 16.1

6100 4 Quarter

OPTION Production Readiness Review OY1

Production Readiness Review (PRR) Production Phase: PRR IAW SOW Paragraph 16.1

6200 4 Quarter

OPTION Production Readiness Review OY2

Production Readiness Review (PRR) Production Phase: PRR IAW SOW Paragraph 16.1

6300 4 Quarter

OPTION Production Readiness Review OY3

Production Readiness Review (PRR) Production Phase: PRR IAW SOW Paragraph 16.1

6400 4 Quarter

OPTION Production Readiness Review OY4

Production Readiness Review (PRR) Production Phase: PRR IAW SOW Paragraph 16.1

7000 1 Each OPTION Physical Configuration Audit BY

FFP

Physical Configuration Audit (PCA) MK 235 MOD 17 & 18 Production Phase: PRR IAW SOW Paragraph 6.0

Data Deliverables

Prepare, maintain, and deliver data IAW CDRLS A001 through A007 and applicable Data Item Description (DID). Government shall have unlimited rights to all data/tech data IAW DFARS 252.227-7019, unless and assertion is accepted by the Government IAW DFARS 252.227-7019. The cost for all data/tech generated by the contractor directly or indirectly in its performance of this effort is included in the price paid by the Government under CLINs 1000 through 7000

CLAUSES INCORPORATED BY FULL TEXT

B-215-H002 REFUNDS (SPARES AND SUPPORT EQUIPMENT) (NAVSEA) (OCT 2018)

(a) In the event that the price of a spare part or item of support equipment delivered under this contract significantly exceeds its intrinsic value, the Contractor agrees to refund the difference. Refunds will not be made to recoup the amount of cost decreases that occur over time due to productivity gains (excluding economic purchase quantity considerations) or changes in market conditions.

(b) For purposes of this requirement, the intrinsic value of an item is defined as follows:

(1) If the item is one which is sold or is substantially similar or functionally equivalent to one that is sold in substantial quantities to the general public, intrinsic value is the established catalog or market price, plus the value of any unique requirements, including delivery terms, inspection, packaging, or labeling.

(2) If there is no comparable item sold in substantial quantities to the general public, intrinsic value is defined as the price an individual would expect to pay for the item based upon an economic purchase quantity as defined in FAR 52.207-4, plus the value of any unique requirements, including delivery terms, inspection, packaging or labeling.

(c) At any time up to two years after delivery of a spare part or item of support equipment, the Contracting Officer may notify the Contractor that based on all information available at the time of the notice, the price of the part or item apparently exceeds its intrinsic value.

(d) If notified in accordance with paragraph (c) above, the Contractor agrees to enter into good faith negotiations with the Government to determine if, and in what amount, the Government is entitled to a refund.

(e) If agreement pursuant to paragraph (d) above cannot be reached, and the Navy's return of the new or unused item to the Contractor is practical, the Navy, subject to the Contractor's agreement, may elect to return the item to the Contractor.

Upon return of the item to its original point of Government acceptance, the Contractor shall refund in full the price paid.

If no agreement pursuant to paragraph (d) above is reached, and return of the item by the Navy is impractical, the Contracting Officer may, with the approval of the Head of the Contracting Activity, issue a Contracting Officer's final decision on the matter, subject to Contractor appeal as provided in the "Disputes" clause (FAR 52.233-1).

(f) The Contractor shall make refunds, as required under this requirement, in accordance with instructions from the Contracting Officer.

(g) The Contractor shall not be liable for a refund if the Contractor advised the Contracting Officer in a timely manner that the price it would propose for a spare part or item of support equipment exceeded its intrinsic value, and with such advice, specified the estimated proposed price, the estimated intrinsic value and known alternative sources or item, if any, that can meet the requirement.

(h) This requirement does not apply to any spare parts or items of support equipment whose price is determined through adequate price competition. This requirement also does not apply to any spare part or item of support equipment if the Contractor submitted, and certified the currency, accuracy and completeness of, cost or pricing data applicable to the item.

(End of text)

Section C - Descriptions and Specifications

STATEMENT OF WORK

STATEMENT OF WORK

VERTICAL LAUNCHING SYSTEM

LAUNCH CONTROL UNIT N63394-21-R-0017

1.0 SCOPE

The Contractor is responsible for the satisfactory and timely performance of all tasks defined in the Statement of Work (SOW). This SOW, with its supporting attachments and referenced documentation, describes the requirement for the manufacture, assembly, test and delivery of Vertical Launching System (VLS) Launch Control Unit (LCU) as follow:

MK 235 LCU MAM OBRP INCO Depot Mod 17 X X X X X

Mod 18 X X X X X

Mod 15 X X X X

Mod 12 X X X X

Mod 11 X X X X

2.0 PROGRAM AUTHORITY

Naval Surface Warfare Center, Port Hueneme Division (NSWC PHD) is the program authority for this contract.

3.0 APPLICABLE DOCUMENTS

The following documents, of the issue indicated, form a part of this SOW, including all applicable terms, conditions, clauses, attachments and exhibits. The exact revisions of the documents are not cited in the text of this SOW. The Contractor shall apply the latest version of the documents in effect at the time of award of the contract. In the event of a conflict between the documents referenced herein and the contents of this SOW, the SOW shall be considered the superseding requirement.

3.1 Government Documents

Document Number Document Title MIL-STD-109C Quality Assurance Terms and Definitions

MIL-STD-1686C

Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, I Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices)

WS 20130 Production Environmental Test Requirements for VLS

TL130-AD-PLN-010-VLS

Configuration Management Program Plan for the MK 41 VLS, Volume 1, Equipment (Hardware) Configuration Management

MK 41 VLS Standing Instruction 94-1F, Attachment 6

Marking for technical data

TL130-AD-PLN-030-VLS, Firmware Configuration Management

NAVSEA Drawing LCU MK 235 Mod 17 p/n 7104280-179 LCU MK 235 Mod 18 p/n 7104280-189 LCU MK 235 Mod 15 p/n 7104280-159

LCU MK 235 Mod 12 p/n 7104280-129 LCU MK 235 Mod 11 p/n 7104280-119

3.2 Industry Documents

Document Number Document Title

ANSI/ISO/ASQC Q9001

Quality Systems - Model for Quality Assurance in Design, Development, Production, Installation and Servicing

ANSI/EIA-649 2011 National Consensus Standard for Configuration Management ANSI/ASQC Q9004 Quality System Elements ISO 9001 Quality Program Requirements SAE Aerospace Standard AS9102 Rev A

Aerospace First Article Inspection

ISO 14000 Environmental Management Systems Standards SAE AS5553 & AS6174 Counterfeit Prevention Plan

4.0 REQUIREMENTS

The Government requires manufacturing of VLS LCU MK 235 Mod 17, Mod 18 and associated Maintenance Assistance Module (MAM), Onboard Repair Part (OBRP), Installation and Checkout (INCO) components kits for LCU MK 235 Mod 17, Mod 18, Mod 15, Mod 12 and Mod 11 in accordance with the documents specified in this SOW, with enclosure J-1, and the technical data package (TDP). All LCU and associated components kits shall meet all requirements in accordance with the TDP and associated specifications.

4.1 Automatic Test Equipment

The Government will provide all necessary test equipment to test the LRUs and LCUs.

The Government has certified the LCU and associated equipment ATEs, along with test program sets for use.

The Contractor shall be responsible for maintaining and calibrating the necessary test capability including ATE, associated interface cables, test tools and calibration tools.

Changes to certified ATE shall be submitted to the Government for approval and certification.

4.2 First Article Inspection

The Contractor shall perform First Article Inspection (FAI) of all assemblies, subassemblies, components and detail parts including castings and forgings in accordance with SAE Aerospace Standard AS9102 Rev A. The purpose of FAI is to provide objective evidence that all TDP and specification requirements are correctly understood, accounted for, verified, and recorded. An FAI is not required for standard catalog items, commercial-off-the-shelf items, raw materials or items procured in accordance with source control drawings.

The Contractor shall submit all FAI requirement waivers to the NSWC PHD for approval. The waiver shall identify, at a minimum, the part description, part number, manufacturer, date last built, location last built, FAI report summary (if applicable), FAI discrepancies and corrective actions (if applicable), and waiver justification.

The Government reserves the right to witness all FAI activities. The Contractor shall submit a comprehensive schedule of FAI events prior to the first event in accordance with CDRL A001. The schedule shall include date, time, expected duration and location.

The Contractor shall generate FAI reports in accordance with AS9102 Rev A. The Contractor shall retain the FAI reports for at least seven years. The Government reserves the right to examine all FAI reports. The Contractor shall submit a report copy via digital means in accordance with CDRL A002.

All deficiencies discovered during the FAIs shall be corrected at Contractor’s expense prior to unit delivery to the Government.

5.0 TECHNICAL DATA REVIEWS, QUALITY AUDITS

During the performance of the contract, the Government shall have the right to perform technical data reviews and quality audits consisting of evaluation of records, processes and products to verify the Contractor's compliance with the respective quality programs. The Government audits may include evaluation of effectiveness in implementing the Contractor's and Subcontractors' or suppliers' audit programs to promote prevention of defects, which includes schedule of audits, evaluation of operations, notification of required corrective action with follow-up and means of notification to top management concerning audit results.

6.0 FOLLOW-ON PHYSICAL CONFIGURATION AUDIT

During the performance of the contract, the Government shall have the right to perform a Physical Configuration Audit (PCA). The PCA may include an evaluation of the effectiveness of the Contractor, Subcontractor and/or supplier audit programs to promote prevention of defects. This includes scheduling of audit, evaluation of operations, and notification of required corrective action with follow-up and means of notification to top management concerning audit results. The PCA will be conducted in accordance with Section 7 of TL130-AD- PLN-010-VLS, Configuration Management Program Plan for the MK 41 VLS, Volume 1, and Equipment (Hardware) Configuration Management.

One (1) PCA shall be conducted over the course of the contract on the LCU MK 235 Mod 17 and Mod 18. The LCUs shall be selected by the Government and the Contractor from the initial production run.

The Contractor shall provide qualified engineering, technical, manufacturing, administrative, management and other support as necessary for the PCA.